prof. dr hab. inż. Paweł Kłosowski
Publications
Filters
total: 103
Catalog Publications
-
Mechanical properties for preliminary design of structures made from PVC coated fabric
PublicationIn this paper, laboratory tests necessary for the identification of non-linear elastic immediate properties of the PVC coated polyester fabric (like AF 9032) are described. The material parameters are specified on the basis of the uniaxial tensile tests in the warp and weft directions as well as on the base of the biaxial tensile tests. For the identification process techniques based on the least squares method are used. The authors...
-
Mechanical properties of polyvinyl chloride-coated fabric under cyclic tests
PublicationThe aim of the present paper is to propose a method of laboratory tests necessary for the identification of mechanical properties of the coated fabric. The material parameters of the coated fabric AF 9032 are specified on the basis of the uniaxial and biaxial tensile tests. For the identification process, the techniques based on the least squares methods are used. Additionally, the uniaxial and biaxial cyclic tests are performed...
-
Finite element description of nonlinear viscoelastic behaviour of technical fabric
PublicationW pracy podano propozycję nieliniowego modelowania zachowania się tkaniny technicznej. Podano wyniki identyfikacji i zweryfikowano poprzez numeryczną symulację prób laboratoryjnych
-
Physical and mathematical modelling of implant-fascia system in order to improve laparoscopic repair of ventral hernia
PublicationThis paper describes an investigation of biomechanical behaviour of hernia repair, which is focused on the selection of safe linking of certain type of implant with fascia in laparoscopic operation. The strength of various fixations of the implant to the fascia is analysed. Methods: The research is based on experimental observations of operated hernia model behaviour during a dynamic impulse load corresponding to post-operative...
-
The early failure of the gamma nail and the dynamic hip screw in femurs with a wide medullary canal. A biomechanical study of intertrochanteric fractures
PublicationBackground: Intertrochanteric fractures may occur in a bone with a wide medullary canal that may lead to significant mobility of a intramedullary nail, contrary to an extramedullary device. This study evaluates the Dynamic Hip Screw and the gamma nail in AO 31.A2.1 fractures in these circumstances. Methods: Synthetic femora with canals drilled to 18 mm were used. Five fixation types were examined: a 2 - hole and a 4 – hole Dynamic...
-
Influence of thermal effects on mechanical properties of PVDF-coated fabric
PublicationThis paper describes the method of laboratory tests necessary for identification of temperature influence on mechanical properties of polyvinylidene fluoride-coated polyester fabric often used for tensile structures. Two nonlinear model descriptions are investigated. The first one is based on the piece-wise linear relations between stress and strain and the second one on the Murnaghan model of solid behavior. This paper is proposed...
-
Stress–strain model of lower corroded steel plates of normal strength for fitness-for-purpose analyses
PublicationThis study investigates the mechanical properties of specimens made of normal strength steel subjected to lower marine immersed corrosion degradation levels (below 25 %). The specimens were corroded in laboratory conditions, and only natural factors were controlled to raise the corrosion rate (reaching the level of 1 mm/year). Three different thicknesses of plates made of normal strength of shipbuilding steel are investigated (between...
-
Mechanical properties of Precontraint 1202 S2 based on uniaxial tensile and creep tests
PublicationThe purpose of the paper is the estimation of the polyvinyl chloride – polyester-coated fabric (Precontraint 1202 S2) mechanical properties under uniaxial tensile tests as well as short- and long-time creep tests. The uniaxial tests are the basis of non-linear elastic description while the creep tests are used for the evaluation of the stiffness parameters in time and for the identification of the standard viscoelastic model. The...
-
Identification of Bodner-Partom model parameters for technical fabrics
PublicationThe thorough analysis of modeling technical fabrics behavior with the viscoplastic Bodner-Partom constitutive law is presented. The study has been focused on differences between the warp and weft direction of the material. To obtain the model’s parameters only the uniaxial tensile laboratory tests with three different, but constant strain rates are required. The parameters have been found for polyester fibers PVC coated fabrics:...
-
Influence of artificial thermal ageing on polyester-reinforced and polyvinyl chloride coated AF9032 technical fabric
PublicationThe presented work deals with the thermal ageing evaluation for polyester-reinforced and polyvinyl chloride coated fabrics. The architectural fabric AF9032 was exposed to artificial thermal ageing by subjecting the material samples to temperature levels of 80℃ and 90℃ for up to 12 weeks. The mechanical properties of the aged fabric have been separately described by the identified linear piecewise model (with assumption of the elastic...
-
Historical carpentry corner log joints—Numerical analysis within stochastic framework
PublicationThe paper presents the results of numerical analysis performed on historical, traditional carpentry corner logjoints of two basic topologies: the short-corner dovetail connection and the saddle notch connection. These types of carpentry joints are commonly used in currently preserved objects of wooden architecture. All connections have been modelled in pinewood, which has been defined in the Finite Element software MSC.Marc/Mentat...
-
Influence of service ageing on polyester-reinforced polyvinyl chloride-coated fabrics reported through mathematical material models
PublicationIn this paper the coupled service (constructional tension) and environmental (sunlight, rainfalls, temperature variations) ageing influence on the polyester-reinforced polyvinyl chloride (PVC)-coated fabric VALMEX is studied. Two cases of the same fabric have been analyzed: one USED for 20 years on the real construction of the Forest Opera in Sopot (Poland), and one kept as a spare material (NOT USED). The following tests have...
-
Nonlinear dynamic analysis of the pure “buckling” mechanism during blow-out trauma of the human orbit
PublicationConsidering the interplay between orbital bones and intraorbital soft tissues, commonly accepted patterns of the blow-out type of trauma within the human orbit require more thorough investigation to assess the minimal health-threatening impact value. Two different three-dimensional finite element method (FEM) models of the human orbital region were developed to simulate the pure “buckling” mechanism of orbital wall fracture in...
-
Posttraumatic Orbital Emphysema: A Numerical Model
PublicationOrbital emphysema is a common symptom accompanying orbital fracture. The pathomechanism is still not recognized and the usually assumed cause, elevated pressure in the upper airways connected with sneezing or coughing, does not always contribute to the occurrence of this type of fracture. Observations based on the finite model (simulating blowout type fracture) of the deformations of the inferior orbital wall after a strike in...
-
Influence of Wood Moisture on Strength and Elastic Modulus for Pine and Fir Wood Subjected to 4-point Bending Tests
PublicationThe main purpose of this research paper was to determine the influence of the wood moisture on the strength and elastic modulus of pine and fir wood specimens subjected to the 4-point bending tests. Six bending tests for each wood species and for two different moisture level have been performed. Then, the advanced statistical analysis of the results has been carried out. On the basis of the obtained results, it has been noted that...
-
Identification of Bodner-Partom Viscoplastic Model Parameters for Some Aluminum Alloys at Elevated Temperature
PublicationThe paper presents the identification process of inelastic (viscoplastic) properties for two aluminum alloys at a temperature of 120°C. The material parameters are calculated on the basis of uniaxial tension tests. Twelve tests at elevated temperature for each alloy have been performed—three tests for four different strain rates. The main purpose of the paper is to identify the Bodner-Partom viscoplastic model parameters for two...
-
Cerclage cable augmentation does not increase stability of the fixation of intertrochanteric fractures. A biomechanical study
PublicationBackground: Intertrochanteric fractures with a posteromedial intermediate fragment are unstable because of the loss of medial support. Additional fixation with a cerclage is used in subtrochanteric fractures, but not in intertrochanteric fractures. The aim of this biomechanical study is to evaluate whether cerclage fixation improves stability of intertrochanteric fractures. Hypothesis: Our hypothesis is that the cerclage fixation...
-
Polyester sail technical woven fabric behaviour under uniaxial and biaxial tensile tests
PublicationThe paper is focused on the identification of mechanical properties of a sail technical woven fabric (yacht sailcloth polyester) style 480 AP with MTO (Medium Tempered Optimized) finish. The non-linear elastic behaviour of the fabric applied for sails is investigated under uniaxial and biaxial tensile tests. Comparison of non-linear elastic parameters with others polyester coated fabrics is made. This paper is intended to be an...
-
Experimental and computational study on mechanical behaviour of carpentry corner log joints
PublicationThis work concerns experimental and numerical research on carpentry joints used in historic wooden buildings in southeastern Poland and western Ukraine. These structures are mainly sacred buildings, and the types of corner log joints characteristic of this region are primarily saddle-notch and dovetail joints; thus, these two types of joints were analysed in this study. The modelling of historic timber structures is a complex...
-
Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties
PublicationThe impact of water-induced degradation on the mechanical properties of the chosen two PTFE-coated, glass threads woven fabrics is investigated in this paper. The paper begins with a survey of literature concerning the investigation and determination of coated woven fabric properties. The authors carried out the uniaxial tensile tests with an application of flat and curved grips to establish the proper values of the ultimate tensile...
-
On the current state of dovetail wall-corner joints in wooden Greek Catholic churches in Polish Subcarpathia with structural and sensitivity analyses
PublicationThis paper describes the current condition of some dovetail joints which form the wall corners of two Greek Catholic churches of wooden construction in Polish Subcarpathia. It also gives the historical background of the sacral architecture of that region. The two structures, which represent the same type of log corner joints are situated in Chotylub and Cewków. The buildings were examined e.g. for damage, wood moisture content,...
-
Drill holes decrease cancellous bone strength: A comparative study of 33 paired osteoporotic human and 9 paired artificial bone samples
PublicationThis study was designed to compare compressive strength of cancellous bone retrieved from the femoral head in a specimen with and without guide wire hole, with comparison to synthetic bone samples. Femoral heads retrieved from 33 patients who sustained femoral neck fractures and underwent hip arthroplasty were cut into cuboids leaving two matching samples from the same femoral head. Similar samples were prepared from synthetic femurs....
-
The cement-bone bond is weaker than cement-cement bond in cement-in-cement revision arthroplasty. A comparative biomechanical study
PublicationThis study compares the strength of the native bone-cement bond and the old-new cement bond under cyclic loading, using third generation cementing technique, rasping and contamination of the surface of the old cement with biological tissue. The possible advantages of additional drilling of the cement surface is also taken into account. Femoral heads from 21 patients who underwent a total hip arthroplasty performed for hip arthritis...
-
Validation of Hydraulic Mechanism during Blowout Trauma of Human Orbit Depending on the Method of Load Application
PublicationThe more we know about mechanisms of the human orbital blowout type of trauma, the better we will be able to prevent them in the future. As long as the buckling mechanism’s veracity is not in doubt, the hydraulic mechanism is not based on equally strong premises. To investigate the correctness of the hydraulic mechanism’s theory, two different methods of implementation of the hydraulic load to the finite element method (FEM) model...
-
Modelling of the viscoelastic properties of the technical fabric VALMEX
PublicationThe analysis of the Burgers model used for the constitutive description of the technical fabric VALMEX vis-coelastic behavior is presented. It has revealed that the correctness of the identification depends strongly on the level of the immediate strain taken for calculations. Moreover, it has been proven that the Burgers model can be used for modelling of the viscoelastic properties of the polyester reinforced PVC coated VALMEX...
-
Analysis of the cyclic load-unload-reload tests of VALMEX aged fabric
PublicationThe paper presents mechanical response of the VALMEX fabric during the cyclic loading-unloading and re-loading experiments. Two types of the aged material used for nearly 20 years as the roofing of the Forest Opera in Sopot (Poland) have been tested. The results have been separately obtained for the warp and fill di-rections. The comparative analysis has revealed that the material aged in service is more durable in the fill di-rection,...
-
Numerical analysis of the carpentry joints applied in the traditional wooden structures
PublicationThe paper concerns the numerical analysis of the carpentry joints made from spruce wood. The material parameters of the wood have been calculated on the basis of nine independent material constants (an orthotropic material). The contact zone between the individual elements of the connection has been determined using Contact Tables in the MSC.Marc software. Five types of carpentry joints have been analyzed. The main aim of the research...
-
Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
PublicationArchitectural fabric AF9032 has been subjected to artificial thermal ageing to determine changes of the material parameters of the fabric. The proposed method is based on the accelerated ageing approach proposed by Arrhenius. 300 mm x 50 mm samples were cut in the warp and fill directions and placed in a thermal chamber at 80 °C for up to 12 weeks or at 90 °C for up to 6 weeks. Then after one week of conditioning at ambient temperature,...
-
Influence of cyclic frozen and defrost on mechanical properties of polytetrafluoroethylene (PTFE)-coated woven fabrics
PublicationThis research aims to determine the influence of the cyclic process of freezing and defrosting on the mechanical properties of the chosen glass fibres and PTFE-coated woven fabrics. The specimens were subjected to freezing at about −20 °C for 4 h and thawing by full immersion into the water at about +20 °C for 4 h. The fabric samples after 25 and 50 frozen cycles were air-dried at room temperature for one week and then subjected...
-
Tensile modulus of human orbital wall bones cut in sagittal and coronal planes
PublicationIn the current research, 68 specimens of orbital superior and/or medial walls taken from 33 human cadavers (12 females, 21 males) were subjected to uniaxial tension untill fracture. The samples were cut in the coronal (38 specimens) and sagittal (30 specimens) planes of the orbital wall. Apparent density (ρapp), tensile Young’s modulus (E-modulus) and ultimate tensile strength (UTS) were identified. Innovative test protocols were...
-
Identification and validation of material parameters for isotropic damage model in viscoplastic flow conditions
PublicationW pracy przedstawiono trzy różne sposóby identyfikacji parametrów materiałowych dla izotropowego modelu zniszczenia w warunkach płynięcia lepkoplastycznego. W celu ustalenia który sposób daje najlepsze rezultaty przeprowadzono każdą z identyfikacji dla wybranego materiału, a następnie dokonano ich oceny porównując wyniki symulacji numerycznych z wynikami eksperymentów. W pracy pokazano również praktyczne zastosowanie modelu - przykład...
-
Determining the viscoplastic parameters of rubber-toughened plastics
PublicationW artykule omówiono szczegółowo zastosowanie sprężysto-lepkoplastycznego prawa Bodnera-Partoma do opisu zachowania się tworzywa sztucznego (kopolimer etylenowo-propylenowy). Parametry materiałowe ustalono na podstawie jednoosiowych testów jednoosiowego rozciągania. Proponowane podejście jest zilustrowane przykładami obliczeniowymi w programie MSC.Marc z wykorzystaniem procedury UVSCPL.
-
Membrane shell finite element for textile fabric modelling numerical and experimental aspects
PublicationW pracy omówiono podstawowe problem numeryczne pojawiające się przy projektowaniu przekryć z tkanin technicznych. Przedstawiono eksperymenty potrzebne do identyfikacji właściwości mechanicznych takich tkanin.
-
Sferyczne zbiorniki na materiały sypkie - problemy projektowania i obliczeń numerycznych
PublicationArtykuł dotyczy problemów jakie występują w trakcie projektowania magazynów w kształcie kopuł sferycznych. Omówiono problem obciążenia wiatrem, sposobu jego przyłożenia oraz problemy obliczeniowe związane z posadowieniem konstrukcji na palach.
-
Isotropic damage in viscoplastic flow conditions, fem applications with practical examples
PublicationW pracy omówiono niektóre zagadnienia zniszczenia w warunkach płynięcia lepkoplastycznego. Podano podstawowe prawa konstytutywne jakie mogą tu być zastosowane oraz sposoby identyfikacji parametrów materiałowych. Pokazano przykład zastosowania.
-
Viscoplastic constitutive laws and their implementation it the finite element method
PublicationW pracy przedstawiono zasady formułowania i zastosowania w metodzie elementów skończonych lepkoplastycznych praw konstytutywnych. Podano skrótowo sposób identyfikacji parametrów i omówiono pewne szczególne założenia, które muszą być przyjęte aby można było dane prawo zastosować w obliczeniach numerycznych.
-
Geometrically nonlinear finite element simulation of smart piezolaminated plates and shells
PublicationW pracy zaproponowano powłokowy element skończony pozwalający na uwzględnienie efektu piezoelektrycznego. Element został wykorzystany w podejściu Lagrange'a, które wymaga starannego dobrania definicji wielkości mechanicznych i elektrycznych. Zależności przemieszczenie-odkształcenie zbudowano na bazie teorii małych odkształceń i umiarkowanych obrotów. Założono liniowy rozkład pól odkształceń i pola elektrycznego po grubości powłoki....
-
Nieliniowe lepkoplastyczne prawa konstytutywne w wybranych zastosowaniach analizy konstrukcji.
PublicationPraca dotyczy zastosowania różnych modeli lekoplastycznych w metodzie elementów skończonych. Podana zasady zapisywania praw, ich obszerna listę, sposoby identyfikacji parametrów oraz przykłady zastosowań w metodzie elementów skończonych.
-
Identification of nonlinear viscoelastic properties of the ''Panama'' fabric
PublicationTkanina techniczna Panama wytwarzana przez firmę Sattler (Niemcy)wykazuje cechy nieliniowe w tym właściwości lepkosprężyste w czasie testów długoterminowych. Na podstawie jednoosiowych testów płynięcia i regeneracji przeprowadzonych dla pięciu poziomów obciążenia przeprowadzono identyfikacje nieliniowych lepkosprężystych właściwości tkaniny. Do opisu zależności konstytutywnych użyto całkowego modelu Schapery'ego. Zastosowano funkcję...
-
Sopot Forest Opera - history and future
PublicationW artykule przedstawiono historię Opery Leśnej w Sopocie oraz plany budowy jej nowego przekrycia.
-
Implementation of continuum damage in elasto-viscoplastic constitutive equations
PublicationW pracy opisano podstawowy wariant modelu Chaboche, oraz założenia i implementacje kontynualnego modelu zniszczenia do komercyjnego programu MES. W pracy zaprazentowano dwa podejścia zobrazowane na przykładach obliczeń numerycznych.
-
On finite element modelling of architectural fabrics for hanging roofs
PublicationArtykuł dotyczy modelowania konstytutywnego i identyfikacji parametrów materiałowych dla tkanin technicznych powszechnie stosowanych w konstrukcjach membranowo-cięgnowych. Autorzy przedstawiają krótką charakterystyke modeli stosowanych w opisie zachowania sie tkanin technicznych. Opisano metodę do idetyfikacji nieliniowo-sprężystych właściwości tkanin technicznych. Dodatkowo dokonao porówania wyników z prób jednoosiowego rozciągania...
-
On constructional solutions for tensile structures
PublicationW pracy zebrano i opisano kilka wybranych rozwiazań konstrukcyjnych stosowanych powszechnie w membranowych konstrukcjach wiszących.
-
Survey of modern trends in analysis of continuum damage mechanics
PublicationW artykule dokonano szerokiego przegladu literatury z zakresu mechaniki zniszczenia izotropowego. Przedstawiono równania stosowane w opisie zniszczenia materiału.
-
Technical fabrics in costruction of large scale roofs - numerical and experimental aspects
PublicationDesigning and construction of textile hanging roofs is the challenging subject for engineers. This type of structure needs geometrically and very often also physically non-linear calculations. Due to different behaviour of two families of threads (warp and weft), which during deformation can change the angle between their directions, they require special constitutive modelling. Also the loading of hanging roofs is very special....
-
Form-finding of textile hanging roof of Opera Lesna open-air theatre in Sopot
PublicationW pracy przedstawiono zasady kształtowania wstępnego przekryć wiszących na przykładzie przekrycia Opery Leśnej w Sopocie. Pokazano dwa sposoby uzyskania zrównoważonej konfiguracji przekrycia o parametrach założonych w projekcie architektonicznym.
-
Experiments on damage development in metallic plates subjected to explosions
PublicationW pracy przedstawiono badania eksperymentalne rozwoju zniszczenia płyt metalowych pod wpływem eksplozji. Zaprezentowano opis badan statycznych i dynamicznych na płytach oraz opis badan jednoosiowych. Dla założonego modelu równania konstytutywnego przedstawiono sposób identyfikacji parametrów materiałowych.
-
Rheological Problems of Technical Fabirc
PublicationW pracy przedstawiono wyniki identyfikacji modeli Chaboche'a i Schapery dla tkaniny technicznej Panama.
-
Methods of material parameters identification for isotropic damage in viscoplastic flow conditions
PublicationW pracy zaprezentowano trzy metody identyfikacji parametrów materiałowych dla izotropowego zniszczenia w warunkach lepkoplastycznego płynięcia. Przedstawiono wyniki identyfikacji dla dwóch stopów aluminium, które następnie zweryfikowano porównując wyniki symulacji numerycznych z wynikami eksperymentalnymi.
-
Ductile fracture prediction in thin metallic plates subjected to explosions
PublicationPraca dotyczy modelowania zniszczenia ciągłego. Zaprezentowano wyniki eksperymentów przeprowadzonych na płytach metalowych poddanych eksplozjom oraz wyniki jednoosiowych prób laboratoryjnych. Opisano przyjęty model prawa konstytutywnego oraz kryteriów zniszczenia. Przedstawiono identyfikację parametrów materiałowych dla przyjętego modelu. Zaprezentowano model numeryczny oraz wyniki symulacji które następnie porównano z wynikami...
seen 2832 times