Publications
Filters
total: 6685
displaying 1000 best results Help
Catalog Publications
Year 2024
-
Hydrogen fuel cell power supply for hybrid elelectric multiple unit train
PublicationIn European countries, electrified routes amount for 40% to 65% of the total railway networks length. Some of those routes are only partially electrified, and construction of a catenary network might not be viable on all routes. Consequently, operators run diesel trains under catenary or require both an electric and diesel vehicle, increasing costs of operation. Dual-mode vehicles exist, but they are mostly equipped with diesel...
-
Hydroxyl and sulfate radical-based degradation of ciprofloxacin using UV-C and/or Fe2+-catalyzed peroxymonosulfate: Effects of process parameters and toxicity evaluation
PublicationCiprofloxacin (CIP) is a valuable antibiotic and discharged in huge quantities in aquatic environment. Different •OH and SO4•−-based advanced oxidation technologies (AOTs), e.g., Fe2+/PMS, UV-C/PMS, and UV-C/Fe2+/PMS are developed for treatment of CIP. The removal of CIP by Fe2+/PMS, UV-C/PMS and UV-C/Fe2+/PMS was 63, 77, and 87 %, respectively, under identical conditions which showed better performance of UV-C/Fe2+/PMS. The UV-C/Fe2+/PMS...
-
Impact of abiotic stressors on nutrient removal and rhizomicrobiome composition in floating treatment wetland with Equisetum hyemale
PublicationFloating treatment wetlands (FTW) are receiving growing interest as a phyto-technology. However, there are significant research gaps regarding the actual role of plant species and plant-microbiome interactions. In this study, the nutrient uptake of Equisetum hyemale was examined in FTW microcosms under the influence of abiotic stressors: As (3 mg/L) and Pb (3 mg/L) as well as Cl− (300 and 800 mg/L) in reference to a control during...
-
Impact of high-pressure processing on the bioactive compounds of milk - A comprehensive review
PublicationHigh-pressure processing (HPP) is a promising alternative to thermal pasteurization. Recent studies highlighted the effectivity of HPP (400–600 MPa and exposure times of 1–5 min) in reducing pathogenic microflora for up to 5 logs. Analysis of modern scientific sources has shown that pressure affects the main components of milk including fat globules, lactose, casein micelles. The behavior of whey proteins under HPP is very important...
-
Impact of new, navigable canal through the Vistula spit on the hydrologic balance of the Vistula lagoon (Baltic Sea)
PublicationThe object of research - the Vistula Lagoon is one of the two lagoons on the Polish coast, which is of great importance not only from an economic point of view, but also an environmental one. The purpose of the paper is to provide calculations on the current water balance for the Vistula Lagoon, before and after construction of a canal through the Vistula Spit. This is important because the construction of a new connection between...
-
Impact of spraying commercial Bentonite Nanoclay on fortification of the mortar as Nano Sprying Technique (NST) in heritages and historical buildings
PublicationSpraying Bentonite NanoClay as an innovative idea satisfied an urgent need for conservation of historical brick constructions. This research explores the application of Nanotechnology as a Nano-Geotechnics (NaG) and Nano Ground Improvement (NGI) techniques for fortifying the mortar between bricks in historical buildings against some environmental erosive factors. Bentonite Nanoparticles were selected because of their compatibility...
-
Implementing fermentation technology for comprehensive valorisation of seafood processing by-products: A critical review on recovering valuable nutrients and enhancing utilisation
PublicationFermentation technology is a biorefining tool that has been used in various industrial processes to recover valuable nutrients from different side streams. One promising application of this technique is in the reclamation of nutritional components from seafood side streams. Seafood processing generates significant amounts of waste, including heads, shells, and other side streams. These side streams contain high quantities of valued...
-
Importance of sign conventions on analytical solutions to the wave-induced cyclic response of a poro-elastic seabed
PublicationThis paper discusses the influence of different sign conventions for strains and stresses, i.e. the solid mechanics sign convention and the soil mechanics sign convention, on the form of governing partial differential equations (the static equilibrium equations and the continuity equation) used to describe the wave-induced cyclic response of a poro-elastic seabed due to propagation of a sinusoidal surface water-wave. Some selected...
-
Improving in-situ biomethanation of sewage sludge under mesophilic conditions: Performance and microbial community analysis
PublicationThis research investigated the application of in-situ biological hydrogen methanation within a continuous stirred tank reactor (CSTR) system under mesophilic conditions, with sewage sludge used as the substrate. Two CSTRs with an effective capacity of 5 L were installed and loaded with inoculum sludge with a volatile solid (VS) concentration of 1.2–1.5 %. They were fed mixed waste sludge with an organic loading rate (OLR) of 1.5...
-
Influence of an Interview Location on Opinions about the Ecosystem Services Provided by Trees
PublicationCollecting opinions regarding environmental management is essential, particularly in urban areas where space is limited, and interests often collide. However, the impact of the conditions in which the research is conducted on opinions and preferences elicited via surveys and interviews about the environment is usually taken for granted. The recent development of computer-aided survey methods allows a simulation of an environment,...
-
Inorganic membrane: a game changer for gas separation and purification
PublicationThis review explores the advancements and remaining challenges in inorganic membrane science, particularly focusing on their potential for industrial applications. It delves into the fundamental principles of inorganic membrane design, fabrication, and characterization techniques. The review also critically analyzes key challenges faced by inorganic membranes, such as physical aging, plasticization, defective formation, and fouling....
-
Insights in microbiotechnology: 2022.Editorial
PublicationThis Research Topic serves as an invaluable resource for readers interested in staying updated with the latest progress and developments in the field of microbiotechnology. It spotlights the innovative research conducted by up-and-coming experts in the field, specifically emphasizing the transforming abilities of microorganisms that greatly influence the scientific community. The advent of multi-omic technologies has revolutionized microbiotechnology,...
-
Interventions reducing car usage: Systematic review and meta-analysis
PublicationThis systematic literature review aimed to investigate the extent to which transport-related interventions induced a reduction in car use. Both qualitative synthesis and meta-analysis were employed. The synthesis included 31 original studies, while the meta-analysis included 21. Of the qualitatively synthesised studies, 74 % demonstrated that interventions were effective in reducing car use. The pooled estimates of the effects...
-
Investigating COVID-19 active pharmaceutical ingredients (APIs) degradation using Peroxydisulfate/FeMnOx binary metal oxide/Ultrasound System
PublicationDegradation of Favipiravir using a hybrid system of peroxydisulfate, FeMnOx binary metal oxide, and ultrasound irradiation was studied. A novel catalyst was synthesized with deep eutectic solvent (DES). The effects of DES type on catalytic performance was evaluated and the catalysts were characterized using XRD, SEM, BET, XPS, and EDS. DES-based catalysts exhibited higher efficiency due to structure change, surface area enhancement...
-
Investigating the sustainability, utilisation, consumption and conservation of sea mammals – A systematic review
PublicationAlmost 80 % of the oceans, especially the Arctic and Subarctic are primarily inhabited by marine mammals. Marine species depend mostly on sea ice for food, raising their young ones and safeguarding themselves from predators. Consumption of marine mammals has always been recommended as healthy, but the truth is that it can be detrimental for human health because of sea water pollution from trash and chemicals. This systematic review...
-
Investigating trip and parking characteristics of hospitals: A case study from Tri-City, Poland
PublicationThis research aims to investigate public hospitals’ trip and parking characteristics based on the study conducted in Poland in September 2021 on the example of the Tri-City agglomeration. The main objective of the research was to build models of the relationship between the number of trips during peak transport hours and the number of beds. The second research element was the analysis of transport behavior in these areas. The research...
-
Investigation of vortex assisted magnetic deep eutectic solvent based dispersive liquid–liquid microextraction for separation and determination of vanadium from water and food matrices: Multivariate analysis
PublicationA new and simple vortex assisted magnetic deep eutectic solvent dispersive liquid–liquid microextraction procedure (VA-MDES-DLLME) was developed for the determination of vanadium (V) in food and water samples by flame atomic absorption spectrometry (FAAS). In the extraction medium, a bis(acetylpivalylmethane) ethylenediimine (H2APM2en) was used for the complexation of V(V) in sample solution at pH 6. The VA-MDES-DLLME was optimized...
-
Iron (Magnetite) Nanoparticle-Assisted Dark Fermentation Process for Continuous Hydrogen Production from Rice Straw Hydrolysate
PublicationThe use of metal nanoparticles (NPs) to enhance hydrogen production in dark fermentation (DF) has become a pioneering field of interest. In particular, iron-based nanoparticles (FeNPs) play a pivotal role in enhancing the activity of metalloenzymes and optimizing feedstock utilization, resulting in improved hydrogen production. This study investigated the effect of FeNPs (magnetite) supplementation at three different concentrations...
-
Key success factors for small design offices in the bidding process
PublicationCompetition in the design office market is high, therefore it is important to be aware of the conditions determining the competitive advantage, thus increasing the bidding effectiveness. For this reason, the aim of the article is to identify key success factors (KSF) increasing successful bidding of a small design office. The factors were identified and then analysed based on a literature review, expert interviews and using Group...
-
Large‐Scale Traveling Ionospheric Disturbances Over the European Sector During the Geomagnetic Storm on March 23–24, 2023: Energy Deposition in the Source Regions and the Propagation Characteristics
PublicationMultiple Large-Scale Traveling Ionospheric Disturbances (LSTIDs) are observed in the European sector in both day-time and night-time during the magnetic storm on March 23–24, 2023. The Total Electron Content (TEC) observation from a network of GNSS receivers shows the propagation of LSTIDs with amplitudes between around 0.5 and 1 TECU originating from auroral and polar cusp regions down to southern Europe (35°N) with velocities...
-
Leveraging food waste for electricity: A low-carbon approach in energy sector for mitigating climate change and achieving net zero emission in Hong Kong (China)
PublicationIn recent years, food waste has been a global concern that contributes to climate change. To deal with the rising impacts of climate change, in Hong Kong, food waste is converted into electricity in the framework of low-carbon approach. This work provides an overview of the conversion of food waste into electricity to achieve carbon neutrality. The production of methane and electricity from waste-to-energy (WTE) conversion are...
-
Lokalne zarysowania w żelbetowych mostach sprężonych. Analiza wybranych problemów
PublicationBetonowe konstrukcje sprężone to struktury, w których wprowadza się w materiał naprężenia eliminujące lub w znacznym stopniu ograniczające w nim rozciąganie [1].W idealnie sprężonej konstrukcji nie występuje praca elementów żelbetowych w II fazie. Niestety tylko niektóre obecnie wznoszone konstrukcje mostowe spełniają ten warunek. Powszechnie stosuje się sprężenie podłużne, natomiast płytę jezdni i inne detale konstruuje jako żelbetowe....
-
Łukowy wiadukt Pomorskiej Kolei Metropolitalnej w Gdańsku. Założenia projektowe i stan techniczny po 10 latach eksploatacji
PublicationArtykuł przedstawia historię, projektowanie i ocenę techniczną po 10 latach eksploatacji wiaduktu WK11 w Gdańsku, będącego częścią Pomorskiej Kolei Metropolitalnej. Opisuje proces budowy i wyzwania związane z rekonstrukcją historycznego mostu z 1914 roku, który został zniszczony podczas II wojny światowej. Autorzy szczegółowo analizują koncepcje projektowe, w tym rozważania nad schematem statycznym i zastosowanym materiałem. W...
-
Machine-Learning Methods for Estimating Performance of Structural Concrete Members Reinforced with Fiber-Reinforced Polymers
PublicationIn recent years, fiber-reinforced polymers (FRP) in reinforced concrete (RC) members have gained significant attention due to their exceptional properties, including lightweight construction, high specific strength, and stiffness. These attributes have found application in structures, infrastructures, wind power equipment, and various advanced civil products. However, the production process and the extensive testing required for...
-
Magnetic hydrophobic deep eutectic solvents for orbital shaker-assisted dispersive liquid-liquid microextraction (MAGDES-OS-DLLME) - determination of nickel and copper in food and water samples by FAAS
PublicationIn this work, a cheap and widely applicable dispersive liquid-liquid microextraction (DLLME) method was developed for the extraction of Ni(II) and Cu(II) from water and food samples and analysis using flame atomic absorption spectrometry. DLLME was assisted by orbital shaker, while ferrofluid as an extractant was based on deep eutectic solvent (DES). This ferrofluid was made of hydrophobic DES (hDES), composed of lauric acid and...
-
Mangiferin: A comprehensive review on its extraction, purification and uses in food systems
PublicationWith the target of fabricating healthier products, food manufacturing companies look for natural-based nutraceuticals that can potentially improve the physicochemical properties of food systems while being nutritive to the consumer and providing additional health benefits (biological activities). In this regard, Mangiferin joins all these requirements as a potential nutraceutical, which is typically contained in Mangifera indica...
-
Maximizing Bio-Hydrogen and Energy Yields Obtained in a Self-Fermented Anaerobic Bioreactor by Screening of Different Sewage Sludge Pretreatment Methods
PublicationEgypt faces significant challenges in managing its sewage sludge generated in large quantities from wastewater treatment plants. This study investigates the feasibility of utilizing sewage sludge as a renewable resource for hydrogen production through anaerobic digestion at the 100 L bioreactor level. Hydrogen is considered a promising alternative energy source due to its high energy content and environmental benefits. To optimize...
-
Mechanical Properties of 3D Printed Parts and Their Injection Molded Alternatives Subjected to Environmental Aging
PublicationAdditive manufacturing is the technology used in medical, industrial, or lifestyle applications. The scientific literature include works reporting various manufacturing parameters’ influence on changes in additive manufacturing components’ mechanical behavior, especially with fused filament fabrication (FFF). The changes in mechanical strength and toughness of FFF compared to injection molding parts were studied. In the study,...
-
Mechanical response of human thoracic spine ligaments under quasi-static loading: An experimental study
PublicationPurpose This study aimed to investigate the geometrical and mechanical properties of human thoracic spine ligaments subjected to uniaxial quasi-static tensile test. Methods Four human thoracic spines, obtained through a body donation program, were utilized for the study. The anterior longitudinal ligament (ALL), posterior longitudinal ligament (PLL), capsular ligament (CL), ligamenta flava (LF), and the interspinous ligament and...
-
Mesoscopic simulations of a fracture process in reinforced concrete beam in bending using a 2D coupled DEM/micro-CT approach
PublicationW tej pracy zbadano numerycznie w warunkach 2D złożony proces pękania w krótkiej prostokątnej belce betonowej wzmocnionej jednym prętem podłużnym (bez zbrojenia pionowego) i poddanej quasi-statycznemu zginaniu w trzech punktach. Krytyczne pęknięcie poprzeczne w belce spowodowało jej uszkodzenie podczas doświadczenia. Symulacje numeryczne przeprowadzono klasyczną metodą elementów dyskretnych (DEM). Przyjęto trójfazowy opis betonu:...
-
Method for prediction of the frost resistance ability of air‐entrained concrete based on the 3D air void characteristics by x‐ray micro‐CT
PublicationIn modern construction, one of the most important factors in the execution of contracts is time. Standard procedures for assessing the frost resistance or concrete are usually very time-consuming and can take up to 40 days. The current paper is experimentally and practically oriented. It presents an alternative testing method, based on air void network, that allows to assess the frost resistance of concrete within just a few days...
-
Methodology of generation of CFD meshes and 4D shape reconstruction of coronary arteries from patient-specific dynamic CT
PublicationDue to the difficulties in retrieving both the time‑dependent shapes of the vessels and the generation of numerical meshes for such cases, most of the simulations of blood flow in the cardiac arteries use static geometry. The article describes a methodology for generating a sequence of time‑dependent 3D shapes based on images of different resolutions and qualities acquired from ECG‑gated coronary artery CT angiography. The precision...
-
Micro- and nano-Illite to improve strength of untreated-soil as a nano soil-improvement (NSI) technique
PublicationSoil stabilization is a technique of improving the geotechnical properties of soils for various engineering applications. However, conventional stabilizers such as cement and lime have some limitations, such as high cost, environmental impact, and durability issues. Therefore, there is a need for alternative and innovative stabilizers that can overcome these challenges. This study introduces nano-Illite, a type of clay mineral,...
-
Microplastics in water resources: Global pollution circle, possible technological solutions, legislations, and future horizon
PublicationBeneath the surface of our ecosystems, microplastics (MPs) silently loom as a significant threat. These minuscule pollutants, invisible to the naked eye, wreak havoc on living organisms and disrupt the delicate balance of our environment. As we delve into a trove of data and reports, a troubling narrative unfolds: MPs pose a grave risk to both health and food chains with their diverse compositions and chemical characteristics....
-
Mieszanki betonowe stosowane w technologii druku trójwymiarowego
PublicationW niniejszej pracy dokonano przeglądu literatury z zakresu mieszanek i zapraw betonowych stosowanych w druku trójwymiarowym. Przegląd literatury przygotowano z zachowaniem chronologii pojawienia się danej publikacji (daty publikacji). Na podstawie przeprowadzonego przeglądu dokonano tabelarycznego zestawienia receptur mieszanek wykorzystywanych w wydrukach trójwymiarowych (3D). Przedstawiony przegląd literatury z zakresu mieszanek...
-
M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions
PublicationThe path-independent M-integral plays an important role in analysis of solids with inhomogeneities. However, the available applications are almost limited to linear-elastic or physically non-linear power law type materials under the assumption of infinitesimal strains. In this paper we formulate the M-integral for a class of hyperelastic solids undergoing finite anti-plane shear deformation. As an application we consider the problem...
-
Modeling and Accuracy Assessment of Determining the Coastline Course Using Geodetic, Photogrammetric and Satellite Measurement Methods: Case Study in Gdynia Beach in Poland
PublicationThe coastal environment represents a resource from both a natural and economic point of view, but it is subject to continuous transformations due to climate change, human activities, and natural risks. Remote sensing techniques have enormous potential in monitoring coastal areas. However, one of the main tasks is accurately identifying the boundary between waterbodies such as oceans, seas, lakes or rivers, and the land surface....
-
Modelling tunnelling-induced deformation in stiff soils with a hyperelastic–plastic anisotropic model
PublicationIn this paper, the tunnelling-induced deformation in anisotropic stiff soils is analysed using FE modelling. The influence of material description is investigated rather than an advanced simulation of the tunnelling method. A new hyperelastic– plastic model is proposed to describe the anisotropic mechanical behaviour of stiff highly overconsolidated soil. This model can reproduce the superposition of variable stress-induced anisotropy...
-
Molecular transformation of dissolved organic matter in manganese ore-mediated constructed wetlands for fresh leachate treatment
PublicationThe organic matter (OM) and nitrogen in Fresh leachate (FL) from waste compression sites pose environmental and health risks. Even though the constructed wetland (CW) can efficiently remove these pollutants, the molecular-level transformations of dissolved OM (DOM) in FL remain uncertain. This study reports the molecular dynamics of DOM and nitrogen removal during FL treatment in CWs. Two lab-scale vertical-flow CW systems were...
-
Monte Carlo simulations of the fracture resistance of an asphalt pavement layer
PublicationThe purpose of the proposed numerical model is to analyze the cracking of the wearing course in a pavement overlay, assuming a pre-existing crack that passes through the binding layer and base. The computations employed the author's simulation-based Monte Carlo material model, which describes the failure process of a Semi-Circular Bend (SCB) specimen during standard laboratory testing of asphalt concrete. A key feature of this...
-
Morphology and internal structure of small-scale washovers formed in the coastal zone of the semi-enclosed tideless basin, Gulf of Gdańsk, Baltic Sea
PublicationThis study explores the morphological features and internal structure of small-scale washovers along the southeastern Baltic Sea coast, providing insights into these most widespread yet often neglected deposits in the recent research of geomorphological and sedimentary record of storm surges. A 15-year-long record of morphological changes of the coast was acquired from regional orthophotos to analyse their geometry and spatial...
-
Most średnicowy w Warszawie. Koncepcja przebudowy
PublicationArtykuł omawia koncepcję przebudowy Mostu Średnicowego w Warszawie, który, ze względu na zły stan techniczny i nieprzystosowanie do współczesnych wymagań, wymaga rekonstrukcji. Planowana przebudowa obejmuje wykorzystanie istniejących filarów nurtowych oraz wydłużenie mostu, co pozwoli na eliminację wiaduktów nad Wisłostradą i Wybrzeżem Szczecińskim. Przedstawiono trzy warianty konstrukcyjne: kratownicę o zmiennej wysokości, skrzynkowe...
-
Multi-instrument analysis of L-band amplitude scintillation observed over the Eastern Arabian Peninsula
PublicationThe study of scintillation-causing ionospheric irregularities is important to mitigate their effects on satellite communications. It is also important due to the spatial and temporal variability of these irregularities, given that their characteristics differ from one region to another. This study investigates the spatial and temporal characteristics of L1 amplitude scintillation-causing ionospheric irregularities over the Eastern...
-
MXene-based composites for capacitive deionization – The advantages, progress, and their role in desalination - A review
PublicationMXenes, a novel large family of 2D transition metal carbides, carbonitrides and nitrides are currently a “hot topic” in science due to their several fascinating physical and chemical properties. It follows from a rich diversity of their elemental compositions and chemical functionalities. MXenes can form composites with many substances, including polymers or metal oxides, which allows to effective “tune” MXene characteristics to...
-
Nadzór i monitorowanie dostępności ZIntegrowanych Węzłów Przesiadkowych
PublicationAudyt dostępności dla planowanych, projektowanych i istniejących węzłów przesiadkowych musi być przeprowadzony w kontekście społecznym i prawnym, w którym re- alizowany jest projekt. W Polsce prawa osób z niepełnosprawnościami reguluje m.in. ustawa z dnia 19 sierpnia 1997 r. o rehabilitacji zawodowej i społecznej oraz zatrudnianiu osób niepełnosprawnych oraz ustawa z dnia 27 sierpnia 1997 r. o rehabilitacji społecznej i zawodowej...
-
Nanofiltration-Assisted Concentration Processes of Phenolic Fractions and Carotenoids from Natural Food Matrices
PublicationIn new food formulations, carotenoids and phenolic compounds are likely to be the most sought after food ingredients according to their bioactivity, nutraceutical, nutritional value, and compatibility properties once incorporated into food formulations. Such solutes are naturally present in many plant-based sources, and some portions are directly consumed when enriching food products and formulations; however, some portions, which...
-
Nanoparticle-assisted biohydrogen production from pretreated food industry wastewater sludge: Microbial community shifts in batch and continuous processes
PublicationBiohydrogen production from industrial waste has gained a significant attention as a sustainable energy source. In this study, the enrichment of biohydrogen production from pretreated dissolved air flotation (DAF) sludge, generated from food industry wastewater treatment plants, was investigated using SiO2@Cu-Ag dendrites cor- e–shell nanostructure (NS). The effect of NS on the changes of the microbial community and biohydrogen...
-
New concept of drilling auger for displacement pile installation
PublicationIn 2020, a new version of the screw displacement auger for pile installation in soil was developed and patented in Poland. It was named DPDT (Displacement Pile Drilling Tool). The general aim of its development was to reduce the soil resistances to the auger during screwing into the ground while maintaning a good load-bearing capacity for the screw displacement piles. The “DPDT-Auger” prototype was tested as a scaled-down model...
-
Non-invasive investigation of a submerged medieval harbour, a case study from Puck Lagoon
PublicationThis study presents an innovative approach to underwater archaeological prospection using non-invasive methods of seabed exploration. The research focuses on the Puck medieval harbour, a cultural heritage site, and utilises acoustic and optical underwater remote-sensing technology. The primary objectives include optimising the use of Airborne Laser Bathymetry in underwater archaeology, enhancing the filtration process for mapping...
-
Nonlinear free and forced vibrations of a dielectric elastomer-based microcantilever for atomic force microscopy
PublicationThe majority of atomic force microcode (AFM) probes work based on piezoelectric actuation. However, some undesirable phenomena such as creep and hysteresis may appear in the piezoelectric actuators that limit their applications. This paper proposes a novel AFM probe based on dielectric elastomer actuators (DEAs). The DE is modeled via the use of a hyperelastic Cosserat model. Size effects and geometric nonlinearity are included...