The structure of Bi2VO5.5 ceramic prepared by 3 different ways measured with X-ray diffraction - Open Research Data - MOST Wiedzy

Wyszukiwarka

The structure of Bi2VO5.5 ceramic prepared by 3 different ways measured with X-ray diffraction

Opis

The structure of Bi2VO5.5 ceramics was measured by XRD. 

Polycrystalline Bi2VO5.5 ceramic (BiVceramic) was synthesised via a conventional solid state reaction route. The stoichiometric mixture of initial powders of Bi2O3 and V2O5were ball-milled in pure acetone for 6 h. The milling was performed in steps of 1 h with rest intervals of 10 min. The mixture was initially heated up to 770 K and then to 1020 K in air. It was kept at this temperature for 24 h and grinded next. The formation of the compound was confirmed by X-ray powder diffraction studies. The calcined powder was mixed with a small amount of ethyl alcohol binder and cold-pressed into pellets (12 mm in diameter and 2–3 mmin thickness) under a compacting pressure of 26 kNcm−2. The obtained pellets were sintered at 1070 K for 24 hwith heating and cooling rates of 50 Kh−1.

Moreover, two additional samples were prepared by the conventional melt quenching technique. First one was prepared from powdered ceramic Bi2VO5.5 (in folder BiVglass, name:BiVas quenched ceramic), and the second one from appropriate amounts of Bi2O3 and V2O5 powders (in folder BiVglass, name: BiVas quenched powders). The melting was conducted in alumina crucibles at 1173 K for few minutes. The melt was poured onto a preheated (573 K) brass plate and pressed by another plate to obtain flat circular disks.

 Additionally, melted samples were heat treated at 650 degC for 1h (in folder BiVglass, name:BiVas quenched ceramic/powder crystallized).

The presence of crystalline phases and their phase composition were studied using an X-ray diffraction (XRD) method using a Philips X'Pert Pro MPD system with CuKα radiation. The XRD measurements were conducted at powdered pre-prepared samples at romm temperature. 

Plik z danymi badawczymi

set39.zip
320.8 kB, S3 ETag 1d3c8e57cba6f455cd53da354a9de7ee-1, pobrań: 18
Hash pliku liczony jest ze wzoru
hexmd5(md5(part1)+md5(part2)+...)-{parts_count} gdzie pojedyncza część pliku jest wielkości 512 MB

Przykładowy skrypt do wyliczenia:
https://github.com/antespi/s3md5
pobierz plik set39.zip

Informacje szczegółowe o pliku

Licencja:
Creative Commons: by 4.0 otwiera się w nowej karcie
CC BY
Uznanie autorstwa
Dane surowe:
Dane zawarte w datasecie nie zostały w żaden sposób przetworzone.

Informacje szczegółowe

Rok publikacji:
2015
Data zatwierdzenia:
2021-05-25
Język danych badawczych:
angielski
Dyscypliny:
  • inżynieria materiałowa (Dziedzina nauk inżynieryjno-technicznych)
DOI:
Identyfikator DOI 10.34808/fkvy-5w51 otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

Słowa kluczowe

Powiązane zasoby

Cytuj jako

wyświetlono 87 razy