Highly crystalline colloidal nickel oxide hole transport layer for low-temperature processable perovskite solar cell
Abstrakt
Highly crystalline NiOX usually requires high annealing temperature (>300 °C) which is incompatible with flexible substrate and might consume high amount of energy. Herein, we demonstrate a facile emulsion process to synthesize highly crystalline, low temperature deposition (<150 °C) and solution processable NiOx nanoparticles (NPs) as a hole transport layer for the perovskite solar cells (PVSCs). A novel surfactant of tetramethylammonium hydroxide (TMAOH) was used to react with Ni(NO3)2 to form Ni(OH)2 nanoparticles (NPs). The micelles of TMAOH act as a nano-reactor containing OH− anion. The Ni+ cation enters into the nano-reactor to form Ni(OH)2 NPs inside the reactor with controlled particle size. The Ni(OH)2 NPs prepared by emulsion process are further calcined to form NiOX NPs with the particle size of 8.28 ± 2.64 nm (EP-NiOX). The smaller size of EP-NiOX NPs results in a good dispersibility and an excellent stability of NPs suspension, which can be used to fabricate uniform NiOX film without any aggregates. A power conversion efficiency (PCE) of 18.85% can be achieved using this EP-NiOX film, as compared with 16.68% using the NiOX NPs synthesized from the chemical precipitation method (CPM-NiOX). Moreover, a flexible PVSCs with a PCE of 14.28% can be fabricated using the EP-NiOX film. Except for the device performance, the quality of the EP-NiOX film shows a good batch-to-batch uniformity, resulting in an excellent reproducibility of PVSCs. This work has a potential for the development of a large-scale production of PVSCs with a high energy conservation.
Cytowania
Autorzy (11)
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
- Copyright
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- Publikacja w czasopiśmie
- Opublikowano w:
-
CHEMICAL ENGINEERING JOURNAL
nr 412,
wydanie 15 May 2021,
ISSN: 1385-8947 - Rok wydania:
- 2021
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) https://doi.org/10.1016/j.cej.2021.128746
- Bibliografia: test
-
- M. Kim, G.-H. Kim, T.K. Lee, I.W. Choi, H.W. Choi, Y. Jo, Y.J. Yoon, J.W. Kim, J. Lee, D. Huh, H. Lee, S.K. Kwak, J.Y. Kim, D.S. Kim, Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells, Joule 3 (9) (2019) 2179-2192, https://doi.org/10.1016/j.joule.2019.06.014. otwiera się w nowej karcie
- Q.i. Jiang, Y. Zhao, X. Zhang, X. Yang, Y. Chen, Z. Chu, Q. Ye, X. Li, Z. Yin, J. You, Surface passivation of perovskite film for efficient solar cells, Nat. Photonics 13 (7) (2019) 460-466, https://doi.org/10.1038/s41566-019-0398-2. otwiera się w nowej karcie
- M. Saliba, J.-P. Correa-Baena, C. M. Wolff, M. Stolterfoht, N. Phung, S. Albrecht, D. Neher, A. Abate, How to make over 20% efficient perovskite solar cells in regular (n-i-p) and inverted (p-i-n) architectures, Chem. Mater. 30 (2018) 4193-4201. otwiera się w nowej karcie
- X. Zheng, Y.i. Hou, C. Bao, J. Yin, F. Yuan, Z. Huang, K. Song, J. Liu, J. Troughton, N. Gasparini, C. Zhou, Y. Lin, D.-J. Xue, B. Chen, A.K. Johnston, N. Wei, M. N. Hedhili, M. Wei, A.Y. Alsalloum, P. Maity, B. Turedi, C. Yang, D. Baran, T. otwiera się w nowej karcie
- D. Anthopoulos, Y.u. Han, Z.-H. Lu, O.F. Mohammed, F. Gao, E.H. Sargent, O.
- M. Bakr, Managing grains and interfaces via ligand anchoring enables 22.3%- efficiency inverted perovskite solar cells, Nat Energy 5 (2) (2020) 131-140, https://doi.org/10.1038/s41560-019-0538-4. otwiera się w nowej karcie
- C. Chen, C. Wu, X. Ding, Y. Tian, M. Zheng, M. Cheng, H. Xu, Z. Jin, L. Ding, Constructing binary electron transport layer with cascade energy level alignment for efficient CsPbI2Br solar cells, Nano Energy 71 (2020), 104604. otwiera się w nowej karcie
- M. Cheng, C. Zuo, Y. Wu, Z. Li, B. Xu, Y. Hua, L. Ding, Charge-transport layer engineering in perovskite solar cells, Science Bulletin 65 (2020) 1237-1241. otwiera się w nowej karcie
- X. Ding, C. Chen, L. Tao, C. Wu, M. Zheng, H. Lu, H. Xu, H. Li, M. Cheng, Dopant- free methoxy substituted copper(II) phthalocyanine for highly efficient and stable perovskite solar cells, Chem. Eng. J. 387 (2020), 124130. otwiera się w nowej karcie
- G. Sathiyan, A.A. Syed, C. Chen, C. Wu, L. Tao, X. Ding, Y. Miao, G. Li, M. Cheng, L. Ding, Dual effective dopant based hole transport layer for stable and efficient perovskite solar cells, Nano Energy 72 (2020), 104673. otwiera się w nowej karcie
- H. Elbohy, B. Bahrami, S. Mabrouk, K. M. Reza, A. Gurung, R. Pathak, M. Liang, Q. Qiao, K. Zhu Tuning hole transport layer using urea for high-performance perovskite solar cells, Adv. Funct. Mater. 29 (2018) 1806740. otwiera się w nowej karcie
- K. Jiang, F. Wu, G. Zhang, P.C.Y. Chow, C. Ma, S. Li, K.S. Wong, L. Zhu, H. Yan, Inverted planar perovskite solar cells based on CsI-doped PEDOT:PSS with efficiency beyond 20% and small energy loss, J. Mater. Chem. A. 7 (2019) 21662-21667. otwiera się w nowej karcie
- S. Yang, S. Chen, E. Mosconi, Y. Fang, X. Xiao, C. Wang, Y. Zhou, Z. Yu, J. Zhao, Y. Gao, F. De Angelis, J. Huang, Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts, Science 365 (2019) 473. otwiera się w nowej karcie
- H. Wang, Z. Yu, J. Lai, X. Song, X. Yang, A. Hagfeldt, L. Sun, One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer, J. Mater. Chem. A. 6 (2018) 21435- 21444. otwiera się w nowej karcie
- C. Zuo, L. Ding, Solution-processed Cu2O and CuO as hole transport materials for efficient perovskite solar cells, Small 11 (2015) 5528-5532. otwiera się w nowej karcie
- P.-H. Lee, B.-T. Li, C.-F. Lee, Z.-H. Huang, Y.-C. Huang, W.-F. Su, High-efficiency perovskite solar cell using cobalt doped nickel oxide hole transport layer fabricated by NIR process, Sol. Energy Mater Sol. Cells. 208 (2020), 110352. otwiera się w nowej karcie
- X. Yin, J. Zhai, P. Du, N. Li, L. Song, J. Xiong, F. Ko, 3 D NiO Nanowall Hole- Transporting Layer for the Passivation of Interfacial Contact in Inverted Perovskite Solar Cells, ChemSusChem 13 (5) (2020) 1006-1012, https://doi.org/10.1002/ cssc.201903025. otwiera się w nowej karcie
- J. Y. Jeng, K. C. Chen, T. Y. Chiang, P. Y. Lin, T. D. Tsai, Y. C. Chang, T. F. Guo, P. Chen, T. C. Wen, Y. J. Hsu, Nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells, Adv. Mater. 26 (2014) 4107-4113. otwiera się w nowej karcie
- Z. Liu, J. Chang, Z. Lin, L. Zhou, Z. Yang, D. Chen, C. Zhang, S.F. Liu, Y. Hao, High- performance planar perovskite solar cells using low temperature, solution-combustion-based nickel oxide hole transporting layer with efficiency exceeding 20%, Adv. Energy Mater. 8 (2018) 1703432. otwiera się w nowej karcie
- X. Yin, Y. Guo, H. Xie, W. Que, L.B. Kong, Nickel oxide as efficient hole transport materials for perovskite solar cells, Solar RRL. 3 (2019) 1900001. otwiera się w nowej karcie
- X. Zheng, Z. Song, Z. Chen, S. S. Bista, P. Gui, N. Shrestha, C. Chen, C. Li, X. Yin, R. A. Awni, H. Lei, C. Tao, R. J. Ellingson, Y. Yan, G. Fang, Interface modification of sputtered NiOx as the hole-transporting layer for efficient inverted planar perovskite solar cells, J. Mater. Chem. C. 8 (2020) 1972-1980. otwiera się w nowej karcie
- J. Cui, F. Meng, H. Zhang, K. Cao, H. Yuan, Y. Cheng, F. Huang, M. Wang, CH3NH3PbI3-based planar solar cells with magnetron-sputtered nickel oxide, ACS Appl. Mater. Interfaces. 6 (2014) 22862-22870. otwiera się w nowej karcie
- G. Li, Y. Jiang, S. Deng, A. Tam, P. Xu, M. Wong, H.S. Kwok, Overcoming the limitations of sputtered nickel oxide for high-efficiency and large-area perovskite solar cells, Adv. Sci. 4 (2017) 1700463. otwiera się w nowej karcie
- S. Seo, I. J. Park, M. Kim, S. Lee, C. Bae, H. S. Jung, N. G. Park, J. Y. Kim, H. Shin, An ultra-thin, un-doped NiO hole transporting layer of highly efficient (16.4%) organic-inorganic hybrid perovskite solar cells, Nanoscale 8 (2016) 11403-11412. otwiera się w nowej karcie
- X. Yin, M. Que, Y. Xing, W. Que, High efficiency hysteresis-less inverted planar heterojunction perovskite solar cells with a solution-derived NiOx hole contact layer, J. Mater. Chem. A. 3 (2015) 24495-24503. otwiera się w nowej karcie
- L.J. Tang, X. Chen, T.Y. Wen, S. Yang, J.J. Zhao, H.W. Qiao, Y. Hou, H.G. Yang, A Solution-Processed Transparent NiO Hole-Extraction Layer for High-Performance Inverted Perovskite Solar Cells, Chem. Eur. J. 24 (12) (2018) 2845-2849, https:// doi.org/10.1002/chem.201705658. otwiera się w nowej karcie
- X. Liang, Q. Yi, S. Bai, X. Dai, X. Wang, Z. Ye, F. Gao, F. Zhang, B. Sun, Y. Jin, Synthesis of Unstable Colloidal Inorganic Nanocrystals through the Introduction of a Protecting Ligand, Nano Lett. 14 (6) (2014) 3117-3123, https://doi.org/ 10.1021/nl501763z. otwiera się w nowej karcie
- Z. Liu, A. Zhu, F. Cai, L. Tao, Y. Zhou, Z. Zhao, Q. Chen, Y.-B. Cheng, H. Zhou, Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells, J. Mater. Chem. A 5 (14) (2017) 6597-6605, https://doi.org/10.1039/ C7TA01593C. otwiera się w nowej karcie
- X. Yin, P. Chen, M. Que, Y. Xing, W. Que, C. Niu, J. Shao, Highly efficient flexible perovskite solar cells using solution-derived NiOx hole contacts, ACS Nano. 10 (2016) 3630-3636. otwiera się w nowej karcie
- H. Zhang, J. Cheng, F. Lin, H. He, J. Mao, K. S. Wong, A. K. Jen, W. C. Choy, Pinhole-free and surface-nanostructured NiOx film by room-temperature solution process for high-performance flexible perovskite solar cells with good stability and reproducibility, ACS Nano. 10 (2016) 1503-1511. otwiera się w nowej karcie
- L. Bronstein, M. Antonietti, P. Valetsky, in: Nanoparticles and Nanostructured Films, Wiley-VCH Verlag GmbH, Weinheim, Germany, 1998, pp. 145-171, https:// doi.org/10.1002/9783527612079.ch07. otwiera się w nowej karcie
- M.-H. Jao, C.-C. Cheng, C.-F. Lu, K.-C. Hsiao, W.-F. Su, Low temperature and rapid formation of high quality metal oxide thin film via a hydroxide-assisted energy conservation strategy, J. Mater. Chem. C. 6 (2018) 9941-9949. otwiera się w nowej karcie
- F. Matter, A.L. Luna, M. Niederberger, From colloidal dispersions to aerogels: How to master nanoparticle gelation, Nano Today 30 (2020), 100827. otwiera się w nowej karcie
- Y.-C. Huang, F.-H. Hsu, H.-C. Cha, C.-M. Chuang, C.-S. Tsao, C.-Y. Chen, High- performance ITO-free spray-processed polymer solar cells with incorporating ink- jet printed grid, Organic Electronics 14 (11) (2013) 2809-2817, https://doi.org/ 10.1016/j.orgel.2013.08.001. otwiera się w nowej karcie
- D. Głowienka, D. Zhang, F. Di Giacomo, M. Najafi, S. Veenstra, J. Szmytkowski, Y. Galagan, Role of surface recombination in perovskite solar cells at the interface of HTL/CH 3 NH 3 PbI 3 , Nano Energy. 67 (2020), 104186. otwiera się w nowej karcie
- Weryfikacja:
- Brak weryfikacji
wyświetlono 372 razy
Publikacje, które mogą cię zainteresować
Highly crystalline colloidal nickel oxide hole transport layer for low-temperature processable perovskite solar cell
- P. Lee,
- T. Wu,
- C. Li
- + 8 autorów
Role of surface recombination in perovskite solar cells at the interface of HTL/CH3NH3PbI3
- D. Głowienka,
- D. Zhang,
- F. Di Giacomo
- + 4 autorów
Featuring Semitransparent p–i–n Perovskite Solar Cells for High-Efficiency Four-Terminal/Silicon Tandem Solar Cells
- P. Lee,
- T. Wu,
- C. Li
- + 5 autorów