Performance of a single layer fuel cell based on a mixed proton-electron conducting composite - Publikacja - MOST Wiedzy

Wyszukiwarka

Performance of a single layer fuel cell based on a mixed proton-electron conducting composite

Abstrakt

Many of the challenges in solid oxide fuel cell technology stem from chemical and mechanical incompatibilities between the anode, cathode and electrolyte materials. Numerous attempts have been made to identify compatible materials. Here, these challenges are circumvented by the introduction of a working single layer fuel cell, fabricated from a composite of proton conducting BaCe0.6Zr0.2Y0.2O3-δ and a mixture of semiconducting oxides – Li2O, NiO, and ZnO. Structural and electrical properties of the composite, related to its fuel cell performance are investigated. The single layer fuel cell shows a maximum OCV of 0.83 V and a peak power density of 3.86 mW cm−2 at 600 °C. Activation and mass transport losses are identified as the major limiting factor for efficiency and power output.

Cytowania

  • 2 4

    CrossRef

  • 0

    Web of Science

  • 2 5

    Scopus

Cytuj jako

Pełna treść

pobierz publikację
pobrano 149 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuł w czasopiśmie wyróżnionym w JCR
Opublikowano w:
JOURNAL OF POWER SOURCES nr 353, strony 230 - 236,
ISSN: 0378-7753
Język:
angielski
Rok wydania:
2017
Opis bibliograficzny:
Zagórski K., Wachowski S., Szymczewska D., Mielewczyk-Gryń A., Jasiński P., Gazda M.: Performance of a single layer fuel cell based on a mixed proton-electron conducting composite// JOURNAL OF POWER SOURCES. -Vol. 353, (2017), s.230-236
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.jpowsour.2017.04.007
Bibliografia: test
  1. J.O. Bockris, A Hydrogen Economy, Science (80-. ). 176 (1972) 1323-1323. doi:10.1126/science.176.4041.1323. otwiera się w nowej karcie
  2. N.H. Behling, Chapter 2 -Fuel Cells and the Challenges Ahead, in: Fuel Cells, 2013: pp. 7-36. doi:10.1016/B978-0-444-56325-5.00002-8. otwiera się w nowej karcie
  3. A. Lajunen, T. Lipman, Lifecycle cost assessment and carbon dioxide emissions of diesel, natural gas, hybrid electric, fuel cell hybrid and electric transit buses, Energy. 106 (2016) 329-342. doi:10.1016/j.energy.2016.03.075. otwiera się w nowej karcie
  4. J. Lewis, Stationary fuel cells -Insights into commercialisation, Int. J. Hydrogen Energy. 39 (2014) 21896-21901. doi:10.1016/j.ijhydene.2014.05.177. otwiera się w nowej karcie
  5. O.Z. Sharaf, M.F. Orhan, An overview of fuel cell technology: Fundamentals and applications, Renew. Sustain. Energy Rev. 32 (2014) 810-853. doi:10.1016/j.rser.2014.01.012. otwiera się w nowej karcie
  6. J. Wang, Barriers of scaling-up fuel cells: Cost, durability and reliability, Energy. 80 (2015) 509-521. doi:10.1016/j.energy.2014.12.007. otwiera się w nowej karcie
  7. H. Tu, U. Stimming, Advances, aging mechanisms and lifetime in solid-oxide fuel cells, J. Power Sources. 127 (2004) 284-293. doi:10.1016/j.jpowsour.2003.09.025. otwiera się w nowej karcie
  8. H. Yokokawa, H. Tu, B. Iwanschitz, A. Mai, Fundamental mechanisms limiting solid oxide fuel cell durability, J. Power Sources. 182 (2008) 400-412. doi:10.1016/j.jpowsour.2008.02.016. otwiera się w nowej karcie
  9. F. Giannici, G. Canu, M. Gambino, A. Longo, M. Salomé, M. Viviani, et al., Electrode-Electrolyte Compatibility in Solid-Oxide Fuel Cells: Investigation of the LSM-LNC Interface with X-ray Microspectroscopy, Chem. Mater. 27 (2015) 2763-2766. doi:10.1021/acs.chemmater.5b00142. otwiera się w nowej karcie
  10. J. Lyagaeva, D. Medvedev, E. Pikalova, S. Plaksin, A. Brouzgou, A. Demin, et al., A detailed analysis of thermal and chemical compatibility of cathode materials suitable for BaCe0.8Y0.2O3−δ and BaZr0.8Y0.2O3−δ proton electrolytes for solid oxide fuel cell application, Int. J. Hydrogen Energy. 42 (2017) 1715-1723. doi:10.1016/j.ijhydene.2016.07.248. otwiera się w nowej karcie
  11. S. Molin, A. Chrzan, J. Karczewski, D. Szymczewska, P. Jasinski, THE ROLE OF THIN FUNCTIONAL LAYERS IN SOLID OXIDE FUEL CELLS, Electrochim. Acta. 204 (2016) 136-145. doi:10.1016/j.electacta.2016.04.075. otwiera się w nowej karcie
  12. A. Chrzan, J. Karczewski, M. Gazda, D. Szymczewska, P. Jasinski, Investigation of thin perovskite layers between cathode and doped ceria used as buffer layer in solid oxide fuel cells, J. Solid State Electrochem. 19 (2015) 1807-1815. doi:10.1007/s10008-015-2815-x. otwiera się w nowej karcie
  13. H.P. He, X.J. Huang, L.Q. Chen, A practice of single layer solid oxide fuel cell, Ionics (Kiel). 6 (2000) 64-69. doi:10.1007/BF02375548. otwiera się w nowej karcie
  14. H. He, Sr-doped LaInO3 and its possible application in a single layer SOFC, Solid State Ionics. 130 (2000) 183-193. doi:10.1016/S0167-2738(00)00666-4. otwiera się w nowej karcie
  15. B. Zhu, Y. Ma, X. Wang, R. Raza, H. Qin, L. Fan, A fuel cell with a single component functioning simultaneously as the electrodes and electrolyte, Electrochem. Commun. 13 (2011) 225-227. doi:10.1016/j.elecom.2010.12.019. otwiera się w nowej karcie
  16. B. Zhu, R. Raza, G. Abbas, M. Singh, An Electrolyte-Free Fuel Cell Constructed from One Homogenous Layer with Mixed Conductivity, Adv. Funct. Mater. 21 (2011) 2465-2469. doi:10.1002/adfm.201002471. otwiera się w nowej karcie
  17. B. Zhu, R. Raza, Q. Liu, H. Qin, Z. Zhu, L. Fan, et al., A new energy conversion technology joining electrochemical and physical principles, RSC Adv. 2 (2012) 5066. doi:10.1039/c2ra01234k. otwiera się w nowej karcie
  18. Q. Liu, H. Qin, R. Raza, L. Fan, Y. Li, B. Zhu, Advanced electrolyte-free fuel cells based on functional nanocomposites of a single porous component: analysis, modeling and validation, RSC Adv. 2 (2012) 8036. doi:10.1039/c2ra20694c. otwiera się w nowej karcie
  19. K. Zagórski, T. Miruszewski, D. Szymczewska, P. Jasinski, M. Gazda, Synthesis and Testing of BCZY/LNZ Mixed Proton-electron Conducting Composites for Fuel Cell Applications, Procedia Eng. 98 (2014) 121-128. doi:10.1016/j.proeng.2014.12.498. otwiera się w nowej karcie
  20. X. Dong, L. Tian, J. Li, Y. Zhao, Y. Tian, Y. Li, Single layer fuel cell based on a composite of Ce0.8Sm0.2O2−δ-Na2CO3 and a mixed ionic and electronic conductor Sr2Fe1.5Mo0.5O6−δ, J. Power Sources. 249 (2014) 270-276. doi:10.1016/j.jpowsour.2013.10.045. otwiera się w nowej karcie
  21. H. Hu, Q. Lin, Z. Zhu, B. Zhu, X. Liu, Fabrication of electrolyte-free fuel cell with Mg0.4Zn0.6O/Ce0.8Sm0.2O2−δ-Li0.3Ni0.6Cu0.07Sr0.03O2−δ layer, J. Power Sources. 248 (2014) 577-581. doi:10.1016/j.jpowsour.2013.09.095. otwiera się w nowej karcie
  22. L. Fan, C. Wang, O. Osamudiamen, R. Raza, M. Singh, B. Zhu, Mixed ion and electron conductive composites for single component fuel cells: I. Effects of composition and pellet thickness, J. Power Sources. 217 (2012) 164-169. doi:10.1016/j.jpowsour.2012.05.045. otwiera się w nowej karcie
  23. H. Hu, Q. Lin, A. Muhammad, B. Zhu, Electrochemical study of lithiated transition metal oxide composite for single layer fuel cell, J. Power Sources. 286 (2015) 388-393. doi:10.1016/j.jpowsour.2015.03.187. otwiera się w nowej karcie
  24. Y. Lu, B. Zhu, Y. Cai, J.-S. Kim, B. Wang, J. Wang, et al., Progress in Electrolyte-Free Fuel Cells, Front. Energy Res. 4 (2016) 1-10. doi:10.3389/fenrg.2016.00017. otwiera się w nowej karcie
  25. A. Ahmed, R. Raza, M.S. Khalid, M. Saleem, F. Alvi, M.S. Javed, et al., Highly efficient composite electrolyte for natural gas fed fuel cell, Int. J. Hydrogen Energy. 41 (2016) 6972-6979. doi:10.1016/j.ijhydene.2016.02.095. otwiera się w nowej karcie
  26. W. Dong, A. Yaqub, N.K. Janjua, R. Raza, M. Afzal, B. Zhu, All in One Multifunctional Perovskite Material for Next Generation SOFC, Electrochim. Acta. 193 (2016) 225-230. doi:10.1016/j.electacta.2016.02.061. otwiera się w nowej karcie
  27. S.M. Haile, Fuel cell materials and components☆☆☆The Golden Jubilee Issue-Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh., Acta Mater. 51 (2003) 5981-6000. doi:10.1016/j.actamat.2003.08.004. otwiera się w nowej karcie
  28. E. Fabbri, D. Pergolesi, E. Traversa, Materials challenges toward proton- conducting oxide fuel cells: a critical review., Chem. Soc. Rev. 39 (2010) 4355-69. doi:10.1039/b902343g. otwiera się w nowej karcie
  29. E. Fabbri, L. Bi, D. Pergolesi, E. Traversa, Towards the next generation of solid oxide fuel cells operating below 600 °c with chemically stable proton- conducting electrolytes., Adv. Mater. 24 (2012) 195-208. doi:10.1002/adma.201103102. otwiera się w nowej karcie
  30. S. Wang, L. Zhang, L. Zhang, K. Brinkman, F. Chen, Two-step sintering of ultrafine-grained barium cerate proton conducting ceramics, Electrochim. Acta. 87 (2013) 194-200. doi:10.1016/j.electacta.2012.09.007. otwiera się w nowej karcie
  31. Y. Xia, X. Liu, Y. Bai, H. Li, X. Deng, X. Niu, et al., Electrical conductivity optimization in electrolyte-free fuel cells by single-component Ce0.8Sm0.2O2- δ-Li0.15Ni0.45Zn0.4 layer, RSC Adv. 2 (2012) 3828. doi:10.1039/c2ra01213h. otwiera się w nowej karcie
  32. K.M. Dunst, J. Karczewski, T. Miruszewski, B. Kusz, M. Gazda, S. Molin, et al., Investigation of functional layers of solid oxide fuel cell anodes for synthetic biogas reforming, Solid State Ionics. 251 (2013) 70-77. doi:10.1016/j.ssi.2013.03.002. otwiera się w nowej karcie
  33. B. Boukamp, A package for impedance/admittance data analysis, Solid State Ionics. 18-19 (1986) 136-140. doi:10.1016/0167-2738(86)90100-1. otwiera się w nowej karcie
  34. H. Kedesdy, A. Drukalsky, X-Ray Diffraction Studies of the Solid State Reaction in the NiO-ZnO System, J. Am. Chem. Soc. 76 (1954) 5941-5946. doi:10.1021/ja01652a013. otwiera się w nowej karcie
  35. M.K. Deore, Effect of NiO Doping on Structural Properties of ZnO, Int. J. Sci. Res. ISSN (Online Index Copernicus Value Impact Factor. 14611 (2013) 2319- 7064. www.ijsr.net (accessed October 27, 2016). otwiera się w nowej karcie
  36. M.G. Wardle, J.P. Goss, P.R. Briddon, Theory of Li in ZnO: A limitation for Li-based p -type doping, Phys. Rev. B. 71 (2005) 155205. doi:10.1103/PhysRevB.71.155205. otwiera się w nowej karcie
  37. K. Gdula-Kasica, A. Mielewczyk-Gryn, S. Molin, P. Jasinski, A. Krupa, B. Kusz, et al., Optimization of microstructure and properties of acceptor-doped barium cerate, Solid State Ionics. 225 (2012) 245-249. doi:10.1016/j.ssi.2012.04.022. otwiera się w nowej karcie
  38. G.-B. Jung, T.-J. Huang, C.-L. Chang, Effect of temperature and dopant concentration on the conductivity of samaria-doped ceria electrolyte, J. Solid State Electrochem. 6 (2002) 225-230. doi:10.1007/s100080100238. otwiera się w nowej karcie
  39. K.D. Kreuer, Proton Conducting Oxides, Annu. Rev. Mater. Res. 33 (2003) 333-359. doi:10.1146/annurev.matsci.33.022802.091825. otwiera się w nowej karcie
  40. L. Zhao, W. Tan, Q. Zhong, The chemical stability and conductivity improvement of protonic conductor BaCe0.8 − x Zr x Y0.2O3 − δ, Ionics (Kiel). 19 (2013) 1745-1750. doi:10.1007/s11581-013-0928-8. otwiera się w nowej karcie
  41. P. Sawant, S. Varma, B.N. Wani, S.R. Bharadwaj, Synthesis, stability and conductivity of BaCe0.8−xZrxY0.2O3−δ as electrolyte for proton conducting SOFC, Int. J. Hydrogen Energy. 37 (2012) 3848-3856. doi:10.1016/j.ijhydene.2011.04.106. otwiera się w nowej karcie
  42. I. EG&G Technical Services, Fuel Cell Handbook, Fuel Cell. 7 Edition (2004) 1-352. doi:10.1002/zaac.200300050. otwiera się w nowej karcie
  43. J. Larminie, A. Dicks, Fuel Cell Systems Explained, Wiley, 2003. doi:10.1016/S0378-7753(00)00571-1. otwiera się w nowej karcie
  44. B. Zhu, P. Lund, R. Raza, J. Patakangas, Q.-A. Huang, L. Fan, et al., A new energy conversion technology based on nano-redox and nano-device processes, Nano Energy. 2 (2013) 1179-1185. doi:10.1016/j.nanoen.2013.05.001. otwiera się w nowej karcie
  45. Q. Wang, J.-E. Moser, M. Grätzel, Electrochemical Impedance Spectroscopic Analysis of Dye-Sensitized Solar Cells, J. Phys. Chem. B. 109 (2005) 14945- 14953. doi:10.1021/jp052768h. otwiera się w nowej karcie
  46. Y. Lu, B. Zhu, J. Wang, Y. Zhang, J. Li, Hybrid power generation system of solar energy and fuel cells, Int. J. Energy Res. 40 (2016) 717-725. doi:10.1002/er.3474. otwiera się w nowej karcie
  47. L. Chen, M. Yao, C. Xia, Anode substrate with continuous porosity gradient for tubular solid oxide fuel cells, Electrochem. Commun. 38 (2014) 114-116. doi:10.1016/j.elecom.2013.11.009. otwiera się w nowej karcie
  48. J. Guan, Transport properties of BaCe0.95Y0.05O3−α mixed conductors for hydrogen separation, Solid State Ionics. 100 (1997) 45-52. doi:10.1016/S0167- 2738(97)00320-2. otwiera się w nowej karcie
  49. G. Bruno, M.M. Giangregorio, G. Malandrino, P. Capezzuto, I.L. Fragalà, M. Losurdo, Is There a ZnO Face Stable to Atomic Hydrogen?, Adv. Mater. 21 (2009) 1700-1706. doi:10.1002/adma.200802579. otwiera się w nowej karcie
  50. P. Hovington, V. Timoshevskii, S. Burgess, H. Demers, P. Statham, R. Gauvin, et al., Can we detect Li K X-ray in lithium compounds using energy dispersive spectroscopy?, Scanning. 38 (2016) 571-578. doi:10.1002/sca.21302. otwiera się w nowej karcie
  51. C. Duan, J. Tong, M. Shang, S. Nikodemski, M. Sanders, S. Ricote, et al., Readily processed protonic ceramic fuel cells with high performance at low temperatures, Science (80-. ). 349 (2015) 1321-1326. doi:10.1126/science.aab3987. otwiera się w nowej karcie
  52. J. Kim, S. Sengodan, G. Kwon, D. Ding, J. Shin, M. Liu, et al., Triple- Conducting Layered Perovskites as Cathode Materials for Proton-Conducting Solid Oxide Fuel Cells, ChemSusChem. 7 (2014) 2811-2815. doi:10.1002/cssc.201402351. otwiera się w nowej karcie
Weryfikacja:
Politechnika Gdańska

wyświetlono 203 razy

Publikacje, które mogą cię zainteresować

Meta Tagi