Wyszukiwarka
Abstrakt
Segmental orifices are often used to measure flows of heterogeneous mixtures, especially in flow meters in the power industry, for example. The orifice (with module m= 0.25) was installed in a stainless-steel pipe with internal diameter of 50 mm, placed in a hydraulic water system. The research was performed for Reynolds numbers ranging from 9,000 to 17,000. The flow characteristics of this orifice obtained based on simulation in SolidWorks Flow Simulation 2014 and experimental data were compared with standard-based calculations. It was determined that relative differences between the obtained flow characteristics did not exceed 1.5% for the experiment and 5.1% for the simulation. The article also presents the results of estimated uncertainty for mass flow measurement qm using the analytical method and the Monte Carlo simulations. The results for both methods proved that the relative expanded uncertainty Urel(qm) does not exceed 1.8% for the tested orifice.
Cytowania
-
5
CrossRef
-
0
Web of Science
-
6
Scopus
Autorzy (6)
-
Andrzej Mrowiec
-
Robert Hanus
-
Marcin Zych
-
Marcin Heronimczak mgr
Cytuj jako
Pełna treść
- Wersja publikacji
- Accepted albo Published Version
- Licencja
-
otwiera się w nowej karcie
Słowa kluczowe
Informacje szczegółowe
- Kategoria:
- Publikacja w czasopiśmie
- Typ:
- artykuły w czasopismach
- Opublikowano w:
-
MEASUREMENT
nr 181,
ISSN: 0263-2241 - Język:
- angielski
- Rok wydania:
- 2021
- Opis bibliograficzny:
- Golijanek-Jędrzejczyk A., Mrowiec A., Hanus R., Zych M., Heronimczak M., Świsulski D.: The assessment of metrological properties of segmental orifice based on simulations and experiments// MEASUREMENT -, (2021), s.109601-
- DOI:
- Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1016/j.measurement.2021.109601
- Weryfikacja:
- Politechnika Gdańska
Powiązane datasety
wyświetlono 157 razy
Publikacje, które mogą cię zainteresować
Determination of the uncertainty of mass flow measurement using the orifice for different values of the Reynolds number
- A. Golijanek-Jędrzejczyk,
- A. Mrowiec,
- R. Hanus
- + 2 autorów
Uncertainty of mass flow measurement using centric and eccentric orifice for Reynolds number in the range 10,000 ≤ Re ≤ 20,000
- A. Golijanek-Jędrzejczyk,
- A. Mrowiec,
- R. Hanus
- + 2 autorów
Uncertainty of the liquid mass flow measurement using the orifice plate
- A. Golijanek-Jędrzejczyk,
- D. Świsulski,
- R. Hanus
- + 2 autorów
Estimating the uncertainty of the liquid mass flow using the orifice plate
- A. Golijanek-Jędrzejczyk,
- D. Świsulski,
- R. Hanus
- + 2 autorów