Publications
Filters
total: 313
Catalog Publications
Year 2010
-
Operational causes of fatigue failures within the passages of gas turbine engines
PublicationThe short profile of a fatigue wear process of gas turbine engine's constructional elements has been introduced in the article. The primary causes of a fatigue cracks formation within the mechanical system as well as within the passages of the engine have been showed. Especial attention was devoted to the low-cycle fatigue, what is associated with unsteady thermal-flow processes being worked out in the passages.The selected damages...
-
Method of evaluation of lubricating ability of lube oils and fuels in energetistic formulation
PublicationThe paper presents an interpretation of operation of a boundary layer of a lubricating medium. A model of the homogeneous Poisson process has been proposed to assess the deterioration process of the layer's operation. The assessment considers the original interpretation of operation of a boundary layer, as a lubricity measure of a boundary layer of any lubricant. In the submitted proposal the operation of a boundary layer is understood...
-
Evaluation of working spaces' technical condition of marine diesel engine on the basis of operation research
PublicationThe paper presents the method of evaluation of the technical state of working spaces of a marine diesel engine at the reduced control susceptibility. The method foresees making diagnosis on the basis of the measurements of exhaust gas pressure in the channels connecting engine cylinders with turbocharger's turbine. In the beginning of the article the research objects are characterized i.e. ZVIEZDA main engine of M401 type and the...
-
Entropy function application within the selection process of diagnostic parameters of marine diesel and gas turbine engines
PublicationThe paper presents the method of conducting an analysis of the diagnostic informativeness among the parameters characterizing the observed gas dynamic processes carried out within working spaces of marine diesel and gas turbine engines. An entropy function, as the measure of uncertainty of the identified states' set of the engine unfitness was applied. Having evaluated the diagnostic information the most adequate parameters were...
-
Conception for diagnosing SI engines fed with biofuel in operation conditions
PublicationThe article deals with the question of diagnosing the high power self ignition (SI) engines fed with pro-ecologic fuels in an aspect of appearing operation problems. There has been presented the specific of action and techno-operation profile of the combustion engine foreseen as an investigations object. The preliminary conception of diagnostic investigations of the engine 7L35MC type produced in H. Cegielski - Poznan S.A. factory...
-
Analysis of possibility and purposefulness of application of waste-heat boilers to trailing suction hopper dredgers
PublicationThis paper presents an analysis of possibility and purposefulness of application of waste-heat boilers to trailing suction hopper dredgers. Using results of own operational research on dredgers this author determined thermal power demand for six hypothetical trailing suction hopper dredgers of various size, at accounting for a type of power system and kind of fuel combusted by dredger's power plant. By means of basic indices of...
Year 2011
-
Valuation method for operation of crankshaft-piston assembly in combustion engines in energy approach
PublicationPrzedstawiono propozycję wartościowania (ilościowego określenia) działania dowolnego układu korbowo-tłokowego silnika o zapłonie samoczynnym, w którym zachodzą oddziaływania energetyczne w określonym czasie. Działanie to rozumiane jest jako przekazywanie odbiornikowi energii w ustalonym czasie, w którym zachodzi przetwarzanie i przenoszenie energii w formie pracy i ciepła. Wartościowanie działania układów korbowo-tłokowych silników...
-
Tribological model of porous bearings with particular attention given to the lubricant lubricity
PublicationThe friction and wear problems, accompanying all the tribological systems, lead to reduced service life. In order to prevent such situation, it is necessary to maintain fluid friction, which improves durability of all friction nodes in a tribological system. In the paper, the tribological system consists of porous bearings and the model deals with their weakest spots - the oil outflow points in the porous wall. A kinetic model...
-
The time of the first transition of the semi-Markov process in the evaluation of diesel engine operation
PublicationW referacie przedstawiono rozwinięcie prezentowanej w literaturze metody ilościowej oceny działania na przykładzie okrętowego silnika głównego z zapłonem samoczynnym. Według tej interpretacji, działanie silnika może zostać przedstawione jako wielkość fizyczna. W tym aspekcie, na przykładzie okrętowego silnika napędu głównego dokonano oceny przydatności tej wielkości do opisu własności niezawodnościowych silnika. Precyzyjne określenie...
-
The semi-Markov model of energy state changes of the main marine internal combustion engine and method for evaluating its operation during ships voyage
PublicationPrzedstawiono metodę oceny działania tłokowych silników spalinowych napędu głównego statków morskich, nazywanych silnikami głównymi, działających w różnych warunkach ich eksploatacji. Metoda ta umożliwia obliczenie wartości działania w wyniku zastosowania teorii procesów semimarkowskich i statystyki matematycznej. Znamienne jest to, że działanie wspomnianych silników spalinowych zostało przyrównane do wielkości fizycznej, którą...
-
Reliability model of slide bearings with particular attention given to lubricating oil
PublicationThe paper presents the slide bearing with circulating lubrication as a system of series three-element structure, where lubricating oil is the weakest link. In accordance with the Pierce statement that ''strength of chain is the strength of its weakest link'', a bearing reliability model has been developed. It allows to use the lubricating oil to evaluate the probability of correct working of the whole slide bearing, i.e. the reliability....
-
Quantitative Assessment of Operation of Ship Main Diesel Engine
PublicationOperation of ship propulsion system is associated with realization of definite operational goals. If to elements of the system the operational reliability strategy could be applied, the situation would be very simple as existing conditions would unambiguously determine application of means being on hand. However decision to reject application of the strategy (even if hypothetical) becomes obvious with a view of necessity of ensuring...
-
Possibility of defining theoretical operation for diesel mengines in energy terms
PublicationPrzedstawiono propozycję wartościowania (ilościowego określenia) działania dowolnego silnika o zapłonie samoczynnym, na przykładzie okrętowego silnika głównego, w którym zachodzą oddziaływania energetyczne w określonym czasie. Działanie to rozumiane jest jako przekazywanie energii śrubie napędowej w ustalonym czasie, w którym zachodzi przetwarzanie i przenoszenie energii w formie pracy bądź ciepła. Wartościowanie działania silników...
-
Metoda diagnozowania układu łożyskowania silnika okrętowego na podstawie wyników badań emisji akustycznej w warunkach eksploatacji
PublicationReferat przedstawia wykorzystywane obecnie metody diagnozowania łożysk głównych silników okrętowych. Stanowi wprowadzenie do dalszej analizy oraz oceny stanu technicznego łożysk ślizgowych szczególnie przy wykorzystaniu metody emisji akustycznej.
-
Identyfikacja uszkodzeń tłoków silników okrętowych metodami endoskopowymi w eksploatacji
PublicationW opracowaniu przedstawiono wybrane zagadnienia diagnostyki endoskopowej przestrzeni roboczych okrętowych tłokowych silników spalinowych. Przybliżono podstawy teoretyczne procesu powstawania uszkodzeń tłoków układów cylindrowych w aspekcie identyfikacji i genezy znanych i rozpoznawalnych stanów niezdatności eksploatacyjnej. Zaprezentowano wyniki badań endoskopowych dotyczące uszkodzeń tłoków, które najczęściej występowały w procesie...
-
Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines. Part III. Diagnostic and operating tolerances
PublicationThe third part of the article presents a method for detecting failures of the automatic engine control system with the aid of an exhaust gas temperature setter, specially designed and machined for this purpose. It also presents a procedure of identifying the operating tolerances and determining the diagnostic tolerances for the exhaust gas temperature recorded in the naval turbine engine during the start-up and acceleration processes....
-
Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines. Part II. Unsteady processes
PublicationThe second part of the article presents the results of operating diagnostic tests of a two- and three-shaft engine with a separate power turbine during the start-up and acceleration of the rotor units. Attention was paid to key importance of the correctness of operation of the automatic engine load control system, the input for which, among other signals, is the rate of increase of the exhaust gas flow temperature. The article...
-
Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines. Part I: Steady-state processes
PublicationThe article presents a possible method of detecting failures in the flow section and supply system of a naval gas turbine engine based on the exhaust gas temperature measured behind the gas generator. This temperature is a basic diagnostic parameter use for evaluating the technical state of the turbine engine in operation, and is monitored during engine start-ups, accelerations and decelerations of rotor units, and steady-load...
-
Endoscopic image processing and analysis of pistons' service failures of marine diesel engines
PublicationThe paper deals with diagnostic issues concerning endoscopic examinations of working spaces within marine diesel engines. In the beginning, endoscopy apparatus being on laboratory equipment of the Department of Ship Power Plants of Gdansk University of Technology has been characterized. The endoscopy considerations have been focused on theoretical bases of a digital image processing and especially - on the "Shadow" measurement...
-
Effect of adopted rules of inference and methods of defuzzification on the final result of the evaluation of reliability made using the fuzzy logic methods
PublicationThe object of interest is to solve the problem of risk management of marine systems. But the main trouble is a lack of numerous and sure data on the reliability of the components of such systems. The methods based on the fuzzy logic seem to be helpful here. The goal of the article is to check the effect of using different fuzzy inference rules and methods of defuzzification on the final result of reliability assessment. The three...
-
Diagnostic tolerances' evaluation method of the start-up exhaust temperature of a naval gas turbine
PublicationThe conducted investigations aimed to elaborate the method of marking diagnostic tolerances of the exhaust temperature of a gas turbine observed during engine's start-up process. The diagnostic tolerances were determined by means of statistical inference by creating the hypothesis about a normal distribution of the start-up exhaust temperature's dispersion in the initial operation moment, which was subsequently verified applying...
-
Analysis of diagnostic informativeness of the exhaust temperature of a naval gas turbine
PublicationThe conducted investigations aimed to carry out an analysis of the possibility that the failures identification in the automatic control system of a gas turbine engine could be worked out on the basis of measurements of the exhaust stream temperature behind the gas generator. The exhaust temperature represents a basic control parameter, enabling technical state evaluation of the engine within the operation process, which is observed...
-
Analysis of changeability of operational loads of main engines on dredgers
PublicationArtykuł przedstawia analizę zmienności eksploatacyjnych obciążeń silników głównych i głównych odbiorników energii na trzech podstawowych typach pogłębiarek. Sformułowano zasady przetwarzania wyników pomiarów, jakie powinny być stosowane przy analizie statystycznej eksploatacyjnych obciążeń silników głównych i głównych odbiorników energii na pogłębiarkach
-
Analysis and Evaluation of the Working Cycle of the Diesel Engine
PublicationThe paper presents a proposal to apply a quantitative evaluation of the diesel engine with regard to the phenomena occurring during of a working cycle. The proposed procedure when analyzing test results from diesel engine is an attempt to transfer an engine activity evaluation methods in the operational time scale (exploit time), eg. in hours, to the micro-scale (dynamic time) relating only to the execution time of one (several)...
-
Alternative diagnostic method applied on marine diesel engines having limited monitoring susceptibility
PublicationThe paper presents a method of technical state evaluation of working spaces of a marine diesel engine at the limited control susceptibility. The method foresees making a diagnosis of the engine's working spaces on the basis of measurements of the exhaust gas pressure in the channels connecting engine cylinders with the turbocharger's turbine. Diagnostic measurements are carried out at representative (comparative) steady loads depending...
-
A method for evaluating theoretical and real operation of diesel engines in energy conversion formulation taking into account their operating indices
PublicationPrzedstawiono propozycję wartościowania (ilościowego określenia z uwzględnieniem wskaźników) działania dowolnego silnika o zapłonie samoczynnym, na przykładzie okrętowego silnika głównego, w którym zachodzą przemiany energetyczne w określonym czasie. Działanie to rozumiane jest jako przekazywanie energii śrubie napędowej w ustalonym czasie, w którym zachodzi przetwarzanie i przenoszenie energii w formie pracy bądź ciepła. Wartościowanie...
-
A method for evaluating durability of porous slide bearings
PublicationThe article presents the structures of porous bearings bushes and greasy lubricants, and the similarity criterion resulting from this structures. A phisical model is proposed which describes the operation of the porous slide bearing bush taking into account, via analogy, the phenomena taking place in the grease lubricant nodes instead of those observed in the bush structures.Included are the result of experimental tests of three...
Year 2012
-
Zastosowanie termowizji jako metody energetycznej w diagnostyce zmęczenia elementów konstrukcyjnych
PublicationW artykule przedstawiono podstawy teoretyczne oceny stanu zmęczenia materiałów konstrukcyjnych z wykorzystaniem metod energetycznych. Przyrost energii wewnętrznej dostarczonej do materiału skutkuje wzrostem temperatury i jest symptomem diagnostycznym. Wyniki badań wstępnych zaprezentowano i omówiono w niniejszym artykule.
-
The sources of contamination and reasons of damage of the flow part of the marine turbine engine in operation
PublicationThe aim of this paperis to show particular sensitivity of the flow part of the marine turbine engine to the presence of contaminations in the intake air. The contaminations form hard-to-remove deposits in the intervene channels that result in a reduced efficiency and performance of the engine. The paper classifies the contaminants according the source of their formation and their destructive force. The performed analyses and syntheses...
-
The evaluation of the vibration measurement usability of electronic indicator lemag "premet C"
PublicationThe measuring possibilities of modern compression and combustion pressure analyzers are extended with additional functions. One of them is parallel to the pressure measurement, the measurement of vibrations in the region of the cylinder head. The paper presents a general assessment of the vibration measurement function of the electronic indicator LEMAG "PREMET C". This feature is very rarely offered by manufacturers of these devices....
-
The conception of energetic investigations of the multisymptom fatigue of the simple mechanical systems' constructional materials
PublicationThe article presents the basic assumptions of the research project aimed, as the main scientific purpose, an identification of the slow-changeable energy processes surrounding the high-cycle fatigue of constructional materials within the plain mechanical system, especially the marine one, for diagnostic purposes. There is foreseen an application of alternative diagnostic methods based on energetic observations of the multi-symptom,...
-
Sterowanie procesem eksploatacji okrętowych silników głównych z zastosowaniem diagnostyki technicznej
PublicationW referacie przedstawiono podstawowe uwarunkowania dotyczące możliwości zastosowania w praktyce eksploatacyjnej okrętowych układów energetycznych elementów strategii eksploatacji wg stanu technicznego (ang. Condition Based Maintenance). W tym aspekcie omówiono rolę diagnostyki jako narzędzia umożlwiającego podejmowanie racjonalnych, wynikających z aktualnego (lub prognozowanego) stanu technicznego, decyzji eksploatacyjnych oraz...
-
Stanowisko laboratoryjne do badania wytrzymałości zmęczeniowej materiałów konstrukcyjnych na podstawie energetycznych procesów resztkowych
PublicationReferat prezentuje stanowisko laboratoryjne przeznaczone do badania wytrzymałości zmęczeniowej elementów narażonych na naprężenia gnące. Autor stara się wyjaśnić i znaleźć miarodajne cechy stanu zużycia zmęczeniowego z wykorzystaniem termowizji jako symptomu diagnostycznego.
-
Stability evaluation of the marine propulsion unit's mechanical system by means of vibration measurements and their analysis
PublicationIn this paper selected issues concerning vibration diagnosis of the mechanical system within marine propulsion units have been given. The analysis of vibration parameters was carried out on the basis of experimental examinations of a real object in which an exceedance of the allowable vibration's level had been observed. In the beginning, the vibration apparatus being on laboratory equipment of the Department of Ship Power Plants...
-
Stability evaluation of the marine propulsion unit mechanical system bymeans of vibrations measurements and their analysis.
PublicationIn paper selected issues concerning vibration diagnosis of the mechanical system within marine propulsion units have been given. The analysis of vibration parameters was carried out on the basis of experimental examinations of a real object in which an exceedance of the allowable vibration's level had been observed. In the beginning, the vibration apparatus being on laboratory equipment of the Department of Ship Power Plants of...
-
"Shadow" method application within endoscopic examinations of marine engines
PublicationThe paper deals with diagnostic issues concerning endoscopic examinations of the working spaces within marine diesel and gas turbine engines. In the beginning, the endoscopy apparatus being on the laboratory equipment of the Department of Ship Power Plants of Gdansk University of Technology in Poland has been characterized. The endoscopy considerations have been focused on theoretical bases of a digital image processing and especially...
-
"Shadow" method application within endoscopic examinations of marine engines
PublicationThe paper deals with diagnostic issues concerning endoscopic examinations of the working spaces within marine diesel and gas turbine engines. In the beginning, the endoscopy apparatus being on the laboratory equipment of the Department of Ship Power Plants of Gdansk University of Technology in Poland has been characterized. The endoscopy considerations have been focused on theoretical bases of a digital image processing and especially...
-
Selection of drive engines for dredge pumps
PublicationThis paper presents the principles of selecting drive engines for dredge pumps, formulated by this author. In order to formulate them influence of drive engines on dredge pump characteristics and dredger effectiveness, have been analyzed. Also, an analysis of results of the author's operational investigations concerning energy consumption and parameters of excavated soil transport on board dredgers has been performed.
-
Risk criteria for sea-going ships arising from the operation of the main engines' crankshaft - conecting rod - piston systems
PublicationIn the article the risk criterion for sea-going ships arising from the operation of the main engines' crankshaft - connecting rod - piston systems is proposed. These criterion is based on the procedures recommended in the Formal Safety Assessment method developed under the auspices of International Maritime Organization (IMO). First of all the collective risk criterion for ship has been proposed. In the next step, the share of...
-
Reliability model of the crankshaft-piston assembly
PublicationThe laws that govern the durability of crankshaft-piston assembly friction nodes can be proved or at least derived or justified in an intuitive way. Operation of all the friction nodes is disturbed by external factors occurring with randomly changing intensity and also appearing at random. As the crankshaft-piston assembly friction nodes have a series structure and effects of those disturbances accumulate, their fitness for use...
-
Podejmowanie decyzji eksploatacyjnych dotyczących siłowni okrętowych w oparciu o logikę rozmytą
PublicationW referacie przedstawiono propozycję zastosowania logiki rozmyte, jako narzędzia przydatnego do podejmowania decyzji eksploatacyjnych. Przedmiotem zainteresowania jest tutaj podjęcie decyzji o dokonaniu obsługi profilaktycznej urządzenia lub systemu siłownianego przed wyjściem statku w morze lub przesunięciu obsługi na termin późniejszy. Propozycja zastosowania logiki rozmytej odnosi się do takich urządzeń i systemów, dla których...
-
Necessity for and possibility of application of the theory of semi-markov processes to determine reliability of diagnising systems
PublicationW opracowaniu uzasadniono konieczność określenia niezawodności systemów diagnozujących (SDG) do sformułowania diagnozy o stanie dowolnego urządzenia technicznego jako systemu diagnozowanego (SDN). Wykazano, że znajomość niezawodności SDG umożliwia określenie wiarygodności diagnozy. Przyjęto, że wiarygodność diagnozy może być określona jako właściwość diagnozy określająca stopień rozpoznania przez system diagnozujący (SDG) rzeczywistego...
-
Model zużycia głównych podzespołów zespołu korbowo-tłokowego i rozrządu
PublicationW referacie na podstawie uszkodzeń zespołu korbowo-tłokowego i rozrządu silników Sulzer RD pobranych z syntetycznych danych o niezawodności wyposażenia wybranych statków PLO i PŻM zbudowany został model zużycia głównych podzespołów zespołu korbowo-tłokowego i rozrządu.
-
Metody energetyczne w ocenie stanu technicznego materiałów konstrukcyjnych poddanych gnącym naprężeniom zmęczeniowym. Wyniki badań.
PublicationReferat stanowi wprowadzenie do oceny stanu zmęczenia materiału metodami energetycznymi. Autor stara się wyjaśnić miarodajne cechy stanu zużycia zmęczeniowego z wykorzystaniem termowizji. Zaprezentowano wyniki badań z użyciem kamery termowizyjnej oraz zdjęcia makroskopowe złomów zmęczeniowych.
-
Failure model of main elements of the ship engine crankshaft-piston assembly
PublicationThe paper presents a failure model of main elements of the crankshaft-piston assembly, based on failures ofcrankshaft-piston assembly and timing gear system of the Sulzer RD engines, retrieved from the equipment reliabilitydata of selected ships.
-
Evaluation of compression realization in diesel engine based on performance indicator changes
PublicationIn the article a method of evaluation of a diesel engine during the realization of processes of working cycle on the example of compression is described. The method is based on the use of the quantity called performance indicator in the description of the engine's work, which contains the information on the energy values, which may be disposed using the engine and the time at which it can be delivered. Theoretical information has...
-
Diagnostyka stanu zmęczenia mechanicznych elementów napędowych na podstawie badań wibroakustycznych i termowizyjnych
PublicationW artykule przedstawiono możliwości termowizyjnej oraz wibroakustycznej oceny stanu zmęczenia materiałów konstrukcyjnych. Stanowią one podstawę do dalszego opracowania miarodajnych symptomów diagnostycznych przydatnych w eksploatacji maszyn, a zwłaszcza części układów napędowych.
-
Diagnosing marine turbine engines through energy characteristics of their flow section
PublicationThe aim of the performed research was to develop of diagnostic method of the flow section of a marine turbine combustion engine based on the level of delamination of its energy characteristics. The here adopted diagnostic model provides for a formulation of the evaluation of the technical conditions based on the measurements of the parameters of the thermodynamic medium in the characteristic control cross-sections of the engine...
-
Badania energetyczne wielosymptomowego zmęczenia materiałów konstrukcyjnych prostych układów mechanicznych
PublicationArtykuł przedstawia podstawowe założenia projektu badawczego, którego głównym celem naukowym jest identyfikacja wolnozmiennych procesów energetycznych towarzyszących wysokocyklowemu zmęczeniu materiałów konstrukcyjnych prostych układów mechanicznych, zwłaszcza okrętowych, dla potrzeb ich diagnozowania. Przewiduje się, że zastosowanie alternatywnych metod diagnostycznych opartych na energetycznych obserwacjach przebiegu wielosymptomowych,...
-
Application a laboratory stand for multi-symptoms tests for high cyclic fatigue of constructional material
PublicationThis paper describes a need of diagnostics present ship plants according to current technical state. In order to reach competent physical quantity describing fatigue of materials by congregated energy. This paper describes using some diagnostics methods (acoustic emission AE, vibration, thermovision, deformation) in order to definition fatigue state of construction material. The author tries to find correlation between measured...