dr hab. inż. Leszek Jarzębowicz
Employment
- Associate professor at Department of Electrical Engineering of Transport
Publications
Filters
total: 94
Catalog Publications
Year 2014
-
3D Machine Vision System for Inspection of Contact Strips in Railway Vehicle Current Collectors
PublicationConstruction and technical condition of current collectors is crucial to reliability and safety of railway transportation. According to the Technical Specifications for Interoperability railway vehicles in the European Union should be equipped with carbon contact strips. Excessive wear or defects of contact strips degrade the capability of undisturbed power transmission, cause faster wear of contact wire, and can even result in...
-
Algorithm for Automatic Wear Estimation of Railway Contact Strips Based on 3D Scanning Results
PublicationElectric rail vehicles use current collection system which consists of overhead contact line and a current collector (pantograph) mounted on the roof of a vehicle. A pantograph is equipped with contact strips, which slide along the contact wire, ensuring steady electric contact. Contact strips are made of carbon layer, fixed to an aluminum carrier. The carbon layer wears down due to friction. Using overly worn contact strips increases...
Year 2013
-
3D scanning system for railway current collector contact strips
PublicationUndisturbed collection of current from a contact wire of the catenary constitutes one of the basic elements in reliable operation of electrified rail transport, particularly when vehicles move at high speed. Quality of current collection is influenced by the construction of catenary and current collectors, as well as by the technical condition and regulation of these two elements. Total contact force of a current collector head...
-
Analiza obrazu 3D do oceny zużycia nakładek ślizgowych
PublicationZ punktu widzenia niezawodności eksploatacyjnej transportu kolejowego, istotnym czynnikiem jest stan powierzchni grafitowych nakładek ślizgowych trakcyjnych odbieraków prądu. Zaproponowane przez autorów nowatorskie stanowisko pomiarowe, oparte na systemie wizyjnym z kamerą 3D, umożliwia rejestrację powierzchni nakładek ślizgowych przejeżdżających lokomotyw. Stanowisko zamontowano i uruchomiono na torze kolejowym. W czasie eksploatacji...
Year 2015
-
Analiza energochłonności pojazdu elektrycznego w oparciu o dane z pokładowego rejestratora parametrów
PublicationW artykule zaproponowano zastosowanie pokładowego rejestratora parametrów dla uzyskania wyników ekspe-rymentalnych pozwalających na analizę energetyczną wózka elektrycznego. Omówiono metodykę przetwarzania danych pomiarowych oraz sposób wykonywania przejazdów dla określenia zapotrzebowania na moc w funkcji prędkości, skuteczności hamowania odzyskowego oraz stopnia chwilowego przeciążenia napędu elektrycznego podczas przyspieszania....
Year 2018
-
Analiza energochłonności pojazdu szybkiej kolei miejskiej z uwzględnieniem zmiennej sprawności napędu trakcyjnego
PublicationWzrost popularności miejskiego szynowego transportu zelektryfikowanego skłania do poszukiwania możliwości zwiększenia jego efektywności energetycznej. W pracy przedstawiono wyniki symulacji jazdy pociągu szybkiej kolei miejskiej (SKM) przy różnych profilach prędkości oraz obciążeniu, dla zmiennej oraz stałej sprawności energetycznej napędu pojazdu. Zmienną sprawność napędu pojazdu uwzględniono na podstawie m.in. sporządzonej mapy...
Year 2017
-
Analiza ruchowa pojazdów szynowych z uwzględnieniem zmian napięcia na odbieraku prądu
PublicationW artykule zaproponowano metodykę wykonywania analizy ruchowej pojazdów szynowych, która uwzględnia wpływ zmieniającego się napięcia zasilającego pojazd a jego właściwości ruchowe. Wykorzystując model opracowany w programie Simulink wskazano na istotne różnice w czasie przejazdu oraz w wartościach napięcia zasilającego pomiędzy proponowanym sposobem analizy a powszechnie stosowanym podejściem uproszczonym.
Year 2012
-
Analiza właściwości mikrokontrolerów do zastosowania w układach sterowania napędami elektrycznymi
PublicationPrzedstawiono wymagania stawiane mikrokontrolerom stosowanym w sterownikach napędu elektrycznego. Dokonano przeglądu najpopularniejszych układów. Omówiono szerzej trzy przykładowe typy mikrokontrolerów o różnym stopniu złożoności, pochodzące od różnych producentów. Zwrócono uwagę na funkcjonalność i parametry warunkujące możliwość wykorzystania ich w założonym zastosowaniu. Rozważono wydajność wbudowanych jednostek arytmetyczno-logicznych....
-
Bezczujnikowe sterowanie trakcyjnym silnikiem synchronicznym z magnesami trwałymi zagłębionymi w wirniku
PublicationMonografia poświęcona jest problemowi bezczujnikowego sterowania silnikiem synchronicznym z magnesami trwałymi zagłębionymi w wirniku. Silniki tego typu, z uwagi na swoje liczne zalety, są szeroko stosowane w nowo opracowywanych trakcyjnych układach napędowych. Sterowanie bezczujnikowe, tzn. sterowanie bez zastosowania przetwornika położenia i prędkości kątowej wirnika, pozwala na zmniejszenie rozmiaru i kosztu napędu, a także...
Year 2016
-
Analysis of Measurement Errors in Rail Vehicles’ Pantograph Inspection System
PublicationThe paper presents an approach to evaluation of height measurement errors in laser scanning inspection system. The system, consisting of a laser line generator and a specialized camera, is dedicated to diagnosing carbon contact strips of railway vehicles’ pantographs. While height measurement resolution is easily computable based on system parameters, determining the measurement error is troublesome due to numerous impacts. As...
-
Analytical modeling of electric drives for vehicle traction control systems
PublicationWheel-torque control bandwidth in vehicle dynamics model is crucial in evaluating optimal tracking ability of tire slip and in analysis of control system stability. Electric drives’ control dynamics are influenced by timing of digital control events, e.g. by sampling instant of motor currents. Reflecting this timing in drive analytical models is therefore important for analysis of vehicle traction systems. The paper considers five...
-
Angle Tracking Observer for Filtering Rotor Position Estimates in Sensorless Electric Drives
PublicationSensorless electric drives use measurements of electrical quantities to estimate rotor position and speed. Measurement errors deteriorate the estimation accuracy, thus additional means are necessary to remove high-frequency components from estimated signals. This paper proposes to use an Angle Tracking Observer (ATO) for reducing noise in rotor position estimates, which is related to random errors in the measurements. A simplified,...
Year 2023
-
Analysis of the Usefulness of Cheap Audio Recorders for Spectral Measurement of Environmental Noise
PublicationEnvironmental noise pollution is nowadays one of the most serious health threats. The impact of noise on the human body depends not only on the sound level but also on its spectral distribution. Reliable measurements of the environmental noise spectrum are often hampered by the very high price of top quality measuring devices. This paper explores the possibility of using much cheaper audio recorders for the frequency analysis....
Year 2022
-
Application of Traction Supply System for Charging Electric Cars
PublicationThe development of electromobility involves the development of electric cars charging infrastructure. The increase of the number of chargers poses new demands for the AC power grid, especially in regard to its capacity of delivering high peak power. As an alternative for the public AC power grid, urban electrified transportation systems (trams, trolleybuses, and metro) can be used for supplying electric cars chargers. The article...
-
Compensation of Voltage Drops in Trolleybus Supply System Using Battery-Based Buffer Station
PublicationThis paper analyzes the results of a trial operation of a battery-based buffer station supporting a selected section of trolleybus power supply systems in Pilsen, Czech Republic. The buffer station aims to prevent the catenary from excessive voltage drops in a part of the route that is most remote from the traction substation. Compensation of voltage drops is carried out by continuously measuring the catenary voltage and injecting...
Year 2011
-
Bezczujnikowe sterowanie trakcyjnym silnikiem IPMSM małej mocy
PublicationThis paper describes an algorithm for estimation of IPMSM angular rotor position. The algorithm uses derivatives of motor phase currents resulting from PWM modulation to obtain the rotor position. Control of the IPMSM electromagnetic torque requires a precise estimation of the rotor angular position throughout the wide speed range. This involves using a set of estimation methods switched with the dependence on the actual rotor...
Year 2010
-
Bezczujnikowe sterowanie trakcyjnym silnikiem IPMSM małej mocy
PublicationW referacie przedstawiono bezczujnikowy napęd trakcyjny wykorzystujący silnik synchroniczny z magnesami trwałymi zagłębionymi w wirniku (IPMSM). Zaprezentowano ogólną strukturę układu regulacji momentu silnika. Omówiono estymatory położenia kątowego wirnika dla małych i dużych prędkości kątowych. Opisano laboratoryjne stanowisko badawcze. Przedstawiono wybrane wyniki eksperymentalne z bezczujnikowej pracy napędu.
Year 2009
-
Bezczujnikowy napęd trakcyjny z silnikiem IPMSM.
PublicationW artykule przedstawiono metodę estymacji położenia kątowego wirnika silnika synchronicznego z magnesami trwałymi zagłębionymi w wirniku. Metoda wymaga wielokrotnego pomiaru wartości prądów fazowych silnika w okresie modulacji. Do obliczeń wykorzystywane są szybkości zmian prądów związane z modulacją napięcia za pomocą falownika tranzystorowego. Przedstawiono algorytm matematyczny metody oraz jego symulacyjną weryfikację.
Year 2019
-
Constant vs. Variable Efficiency of Electric Drive in Train Run Simulations
PublicationTrain run simulations, which focus on various power- and energy-oriented aspects, should reflect the losses in the electric powertrain. In general, the powertrain efficiency varies with respect to load and speed. Including this relation in simulation requires knowledge about detailed drivetrain parameters, which are often unavailable. This paper verifies the possibility to approximate the drivetrain efficiency in train run simulations...
-
Derivation of motor mean phase currents in PMSM drives operating with low switching-to-fundamental frequency ratio
PublicationPulse width modulation (PWM) of inverter output voltage causes the waveforms of motor phase cur-rents to consist of distinctive ripples. In order to provide suitable feedback for the motor current con-trollers, the mean value must be extracted from the currents’ waveforms in every PWM cycle. A com-mon solution to derive the mean phase currents is to sample their value at the midpoint of a symmetrical PWM cycle. Using an assumption...
seen 3528 times