Publikacje
Filtry
wszystkich: 640
Katalog Publikacji
Rok 2018
-
3-D finite-difference time-domain modelling of ground penetrating radar for identification of rebars in complex reinforced concrete structures
PublikacjaThis paper presents numerical and experimental investigations to identify reinforcing bars using the ground penetrating radar (GPR) method. A novel element of the paper is the inspection of different arrangements of reinforcement bars. Two particular problems, i.e. detection of few adjacent transverse bars and detection of a longitudinal bar located over or under transverse reinforcement, have been raised. An attention was also...
-
A Nonlinear Model of a Mesh Shell
PublikacjaFor a certain class of elastic lattice shells experiencing finite deformations, a continual model using the equations of the so-called six-parameter shell theory has been proposed. Within this model, the kinematics of the shell is described using six kinematically independent scalar degrees of freedom — the field of displacements and turns, as in the case of the Cosserat continuum, which gives reason to call the model under consideration...
-
A Note on Reduced Strain Gradient Elasticity
PublikacjaWe discuss the particular class of strain-gradient elastic material models which we called the reduced or degenerated strain-gradient elasticity. For this class the strain energy density depends on functions which have different differential properties in different spatial directions. As an example of such media we consider the continual models of pantographic beam lattices and smectic and columnar liquid crystals.
-
A study on transverse shear correction for laminated sandwich panels
PublikacjaThe paper presents a study on an application of the First Order Shear Deformation Theory in a linear static analysis of elastic sandwich panels. A special attention has been given to the issue of the transverse shear correction. Two benchmark examples of sandwich plate problems with known reference solutions have been selected for a comparative analysis performed with own Finite Element codes. Interesting results allowed for drawing...
-
Acceleration waves in the nonlinear micromorphic continuum
PublikacjaWithin the framework of the nonlinear elastic theory of micromorphic continua we derive the conditions for propagation of acceleration waves. An acceleration wave, also called a wave of weak discontinuity of order two, can be treated as a propagating nonmaterial surface across which the second derivatives of the placement vector and micro-distortion tensor may undergo jump discontinuities. Here we obtain the acoustic tensor for...
-
Analiza przyczyn powstawania uszkodzeń na gzymsach obiektu GM 1-2 wykonanego w ramach zadania „Budowa drogi publicznej drogowej trasy średnicowej Katowice - Gliwice, część „zachód" od ul. Baildona w Gliwicach do terenu miasta Zabrze od km 4+037,37 do km 5+320,00 (odcinek nr G2/4)", roboty gwarancyjne
PublikacjaCelem opracowania jest określenie przyczyn powstania uszkodzeń (zarysowania i zacieki) na gzymsach obiektu GM1-2 wykonanego w ramach zadania „Budowa drogi publicznej drogowej trasy średnicowej Katowice - Gliwice, część „zachód" od ul. Baildona w Gliwicach do terenu miasta Zabrze od km 4+037,37 do km 5+320,00 (odcinek nr G2/4)".
-
Analiza wpływu zerwania kabla sprężenia zewnętrznego estakady wschodniej E5 w ciągu drogi krajowej nr 25 Trasy Bursztynowej w Koninie na nośność konstrukcji
PublikacjaCelem opracowania jest analiza wpływu zerwania kabla sprężenia zewnętrznego estakady wschodniej E5 w ciągu drogi krajowej nr 25 Trasy Bursztynowej w Koninie na nośność konstrukcji.
-
Analytical Buckling of FG Nanobeams on The Basis of A New One Variable First-Order Shear Deformation Beam Theory
PublikacjaIn this work, buckling analysis of functionally graded (FG) nanobeams based on a new refined beam theory has been analyzed. The beam is modeled as an elastic beam subjected to unidirectional compressive loads. To achieve this aim, the new obtained beam theory has only one variable which leads to one equation similar to the Euler beam theory and also is free of any shear correction factor. The equilibrium equation has been...
-
Analytical Buckling of FG Nanobeams on The Basis of A New One Variable First-Order Shear Deformation Beam Theory
PublikacjaIn this work, buckling analysis of functionally graded (FG) nanobeams based on a new refined beam theory has been analyzed. The beam is modeled as an elastic beam subjected to unidirectional compressive loads. To achieve this aim, the new obtained beam theory has only one variable which lead to one equation similar to Euler beam theory and also is free of any shear correction factor. The...
-
Application of guided waves in the evaluation of steel-concrete adhesive connection
PublikacjaThe aim of the paper is the application of guided waves in the evaluation of a condition state of adhesive connection between steel and concrete. The study concerns a push-out specimen consisting of two steel plates glued to opposite faces of a concrete cube with the use of structural adhesive. Wave propagation in the specimen without external load is investigated both experimentally and numerically. The second stage of the investigation...
-
Application of lightweight cement composite with foamed glass aggregate in shell structures
PublikacjaThe purpose of the paper is to investigate the abilities of applying Granulated Expanded Glass Aggregate (GEGA) as a natural volume substitute of aggregate as a component of lightweight concrete. The GEGA aggregates used in the experiments were made of confused glass waste. In order to achieve satisfactory strength of concrete Granulated Ash Aggregate (GAA) was added as well. To produce specimens three grain sizes of aggregates...
-
Applications of Tensor Analysis in Continuum Mechanics
PublikacjaA tensor field is a tensor-valued function of position in space. The use of tensor fields allows us to present physical laws in a clear, compact form. A byproduct is a set of simple and clear rules for the representation of vector differential operators such as gradient, divergence, and Laplacian in curvilinear coordinate systems. The tensorial nature of a quantity permits us to formulate transformation rules for its components...
-
Assessing vehicle restraint systems on horizontal curves
PublikacjaHorizontal curves, an element of road infrastructure, have a statistically high number of accidents. Considering that horizontal curves in the last ten years have had app. 10% of all road accidents representing app. 14% of all fatalities on Polish roads, the issue is serious and requires more research and proper road safety treatments. Data for 2007 - 2016 show that in the case of accidents on horizontal curves app. 45% of the...
-
Badania nieniszczące i monitoring elementów konstrukcji budowlanych w warunkach laboratoryjnych
PublikacjaW artykule przedstawiono wyniki przykładowych badań diagnostycznych elementów konstrukcji inżynierskich w warunkach laboratoryjnych metodą propagacji fal mechanicznych. Testom poddano płytę stalową, zakładkowe połączenie klejone oraz czołowe połączenie śrubowe. Badania ukierunkowano na pozyskiwanie i rozpoznawanie wzorców uszkodzeń dla elementów i defektów o znanej geometrii oraz kontrolowanym sposobie zniszczenia. Przeprowadzone...
-
BADANIA ODBIOROWE KOMPOZYTOWEJ KŁADKI NAD KANAŁEM RADUNI W PRUSZCZU GDAŃSKIM
PublikacjaW pracy przedstawiono wyniki badań przeprowadzonych podczas próby obciążeniowej kładki kompozytowej GFRP w Pruszczu Gdańskim. Badania obejmowały zarówno testy statyczne, jak i dynamiczne. Uzyskane wyniki wskazują na większą niż teoretycznie oczekiwaną sztywność przestrzenną konstrukcji. Wszystkie pomierzone parametry struktury były lepsze podczas pomiarów in-situ, niż wykazały analizy numeryczne.
-
Badania odbiorowe obiektu gruntowo-powłokowego rekordowej rozpiętości
PublikacjaMosty o konstrukcji gruntowo-powłokowej są atrakcyjne, m.in. ze względu na specyficzne walory architektoniczne. Wiadukt tego typu został wzniesiony między innymi w ciągu drogi krajowej nr 16 Grudziądz - Olsztyn na obwodnicy Ostródy. Charakteryzuje się on unikalnym rozmiarem, niespotykanym dla tego typu konstrukcji. W artykule zaprezentowano wybrane wyniki powierzchniowego pomiaru przemieszczeń 3D z wykorzystaniem skanera laserowego.
-
Bending of a Three-Layered Plate with Surface Stresses
PublikacjaWe discuss here the bending deformations of a three-layered plate taking into account surface and interfacial stresses. The first-order shear deformation plate theory and the Gurtin-Murdoch model of surface stresses will be considered and the formulae for stiffness parameters of the plate are derived. Their dependence on surface elastic moduli will be analyzed.
-
Between Descriptive Geometry and CAD 3D
PublikacjaDescriptive geometry provides methods to analyse three-dimensional space through two-dimensional drawings and prepares to create technical documentation. Geometric form of an engineering project is presented by the means of projection methods based on a 3D model, which is present in designer’s imagination. The forthcoming era of Building Information Modelling (BIM) brings changes in the way the engineer works, as the vision is...
-
Composite sandwich footbridge - measured dynamic response vs. FEA
PublikacjaThe paper describes a process of in situ dynamic tests of a composite sandwich footbridge before its accepta-tion for exploitation in real traffic conditions. It is only a part of a big research task that includes design, manufacture and introduce practical application of the bridge. The in situ measured natural modes and fre-quencies are compared with numerically determined ones. Finite element analysis is established to estimate...
-
Damage Imaging in Lamb Wave-Based Inspection of Adhesive Joints
PublikacjaAdhesive bonding has become increasingly important in many industries. Non-destructive inspection of adhesive joints is essential for the condition assessment and maintenance of a structure containing such joints. The aim of this paper was the experimental investigation of the damage identification of a single lap adhesive joint of metal plate-like structures. Nine joints with different defects in the form of partial debonding...
-
Deformation Analysis of a Composite Bridge during Proof Loading Using Point Cloud Processing
PublikacjaRemote sensing in structural diagnostics has recently been gaining attention. These techniques allow the creation of three-dimensional projections of the measured objects, and are relatively easy to use. One of the most popular branches of remote sensing is terrestrial laser scanning. Laser scanners are fast and efficient, gathering up to one million points per second. However, the weakness of terrestrial laser scanning is the...
-
Direct shear stress vs strain relation for fiber reinforced composites
PublikacjaThe majority of fiber reinforced composites exhibit strong non-linear behavior in in-plane shear state. The effect is attributed to the micro-cracks appearing in the matrix and can be modeled on the micro and macro level. In this work the author proposes constitutive laws describing the non-linear in-plane shear response, which can be alternative for the relations commonly considered in the literature. The proposed equations are...
-
Doświadczalne i numeryczne badania propagacji fal elektromagnetycznych w zastosowaniu do diagnostyki konstrukcji żelbetowych i ceglanych metodą georadarową
PublikacjaNiniejsza praca dotyczy zagadnień propagacji fal elektromagnetycznych z ukierunkowaniem na diagnostykę nieniszczącą obiektów budowlanych. Głównym celem rozprawy było opracowanie procedur umożliwiających efektywniejsze wykorzystywanie metody georadarowej w ocenie stanu konstrukcji żelbetowych i ceglanych. Szczególną uwagę poświecono sposobom identyfikacji prędkości propagacji fali elektromagnetycznej na podstawie anomalii obserwowanych...
-
Ekspertyza techniczna konstrukcji mostu M-33 wykonywanego w km 12+150,73 drogi S6 w ramach realizacji przedsięwzięcia „Budowa obwodnicy Koszalina i Sianowa na S-6 wraz z odcinkiem S-11 od węzła „Koszalin” do węzła „Bielice”
PublikacjaCelem opracowania jest analiza projektu konstrukcji w jezdni prawej mostu M-33P [1] wykonywanego w km 12+150,73 drogi S-6 w ramach realizacji przedsięwzięcia „Budowa obwodnicy Koszalina i Sianowa na S-6 wraz z odcinkiem S-11 od węzła „Koszalin” do węzła „Bielice”. Podstawą do realizacji ekspertyzy były zauważone przez przedstawicieli Wykonawcy obiektu PORR S.A. nieprawidłowości w pracy konstrukcji mostu M-33P, które pojawiły się...
-
Ekspertyza techniczna określająca przyczyny wystąpienia zarysowań w strefach dylatacji na ekranach zapory czołowej i bocznej zbiornika wodnego Nysa na rzece Nysa Kłodzka
PublikacjaCelem ekspertyzy technicznej jest określenie przyczyn wystąpienia zarysowań i pęknięć przy dylatacjach płyt żelbetowych, tworzących ekran zapory czołowej i bocznej zbiornika wodnego Nysa oraz prezentacja koncepcji naprawy.
-
Elastoplastic nonlinear FEM analysis of FGM shells of Cosserat type
PublikacjaThe paper is a continuation of [1] where the formulation of the elastic constitutive law for functionally graded materials (FGM) on the grounds of nonlinear 6-parameter shell theory with the 6th parameter (the drilling degree of freedom) was presented. Here the formulation is extended to the elasto-plastic range. The material law is based on Cosserat plasticity and employs the well-known Tamura-Tomota-Ozawa (TTO) [2] mixture...
-
Electroelastic biaxial compression of nanoplates considering piezoelectric effects
PublikacjaIn the present theoretical work, it is assumed that a piezoelectric nanoplate is connected to the voltage meter which voltages have resulted from deformation of the plate due to in-plane compressive forces whether they are critical buckling loads or arbitrary forces. In order to derive governing equations, a simplified four-variable shear deformation plate theory has been employed using Hamilton’s principle and Von-Kármán...
-
Enhanced energy conversion as a result of fluid-solid interaction in micro- and nanoscale
PublikacjaIt is known that nano- and micromechanics require new approaches to right describing of surface-like phenomena which lead to an enhanced energy conversion. In this work, a general form of surface forces that consist of a contribution from both the friction and mobility components has been extended to collect the effects of bulk and surface motion of a fluid. Quite similar impact can be observed for a solid-fluid mixture, where...
-
Estimation of Failure Initiation in Laminated Composites by means of Nonlinear Six-Field Shell Theory and FEM
PublikacjaThe monography deals with the problem of failure initiation in thin laminated composites. Known techniques of laminate structures modelling are briefly characterised. Eventually, shell based approach is chosen for the purpose of the description of the composite structures behaviour, as it predicts their deformation and states of stress effectively in a global sense. The nonlinear six parameter shell theory (6p theory) with asymmetric...
-
Failure Monitoring and Condition Assessment of Steel-Concrete Adhesive Connection Using Ultrasonic Waves
PublikacjaAdhesive bonding is increasingly being incorporated into civil engineering applications. Recently, the use of structural adhesives in steel-concrete composite systems is of particular interest. The aim of the study is an experimental investigation of the damage assessment of the connection between steel and concrete during mechanical degradation. Nine specimens consisted of a concrete cube and two adhesively bonded steel plates...
-
FEM simulation of laminate failure in the three point bending
PublikacjaThe paper presents a FEM simulation of failure of laminate subjected to the three point bending. The numeri-cal model is based on the equivalent single layer approach with 6-paramater non-linear shell theory kinematics. It is implemented in the non-commercial FEM code. The failure initiation is detected with the use of Tsai-Wu criterion. After the failure onset the progressive failure process is modelled through the appropriate...
-
Finite element method simulations of various cases of crash tests with N2/W4/A steel road barrier
PublikacjaThe subject of this study is performance of N2/W4/A steel road safety barrier investigated in numerical simulations. System was checked under several types of initial conditions, which were assumed basing on the TB11 and TB32 normative crash tests. The main goal of present study is to investigate the relationship between initial conditions (angle and velocity) of the impact and the severity indices (associated to the vehicle occupant) during...
-
Guided ultrasonic waves for detection of debonding in bars partially embedded in grout
PublikacjaThis paper deals with theoretical, numerical and experimental investigations of guided wave propagation in multilayered cylindrical bars with pre-existing debonding. The research focuses on a complex description of the nature of the wave phenomena occurring in a debonded specimen with a special emphasis on the influence of the location of damage on the wave conversion and diffraction. Experimental non-destructive and destructive...
-
Guided waves for nondestructive diagnostics of embedded waveguides
PublikacjaThe thesis concentrates on comprehensive theoretical, numerical and experimental analysis of guided wave propagation in bars embedded in concrete or mortar. The investigations are focused on a particular type of objects representing a laboratory model of a ground anchor. Complex description of wave propagation phenomena in partially embedded bars is given and its application in...
-
Harmonic Vibrations of Nanosized Magnetoelectric Bodies with Coupled Surface and Interphase Effects: Mathematical Models and Finite Element Approaches
PublikacjaThe harmonic problems for piezomagnetoelectric nanosized bodies with taking into account the coupled damping and surface effects are considered on the base of the generalized Gurtin-Murdoch model. In the development of previous investigations, the coupled mechanical, electric and magnetic surface effects with surface inertial terms are introduced into the model. For a homogeneous model, the composite material is considered as homogeneous...
-
HYDROGEN PRODUCTION PERFORMANCE IN THERMOCATALYTIC REACTOR BASED ON THE INTERMETALLIC PHASE OF NI3AL
PublikacjaThe main aim of the following paper is mathematical modelling for momentum, heat and mass transfer, which is accompanied by chemical surface reactions of the flow of the mixture helium and methanol. The thermocatalytic devices used for decomposition of hydrocarbons incorporate vertical microchannels coupling at the ends and heated to 500 oC at the walls. The results of the experiment were compared with CFD calculations to calibrate...
-
Identyfikacja prędkości fali elektromagnetycznej w przegrodach budowlanych diagnozowanych metodą georadarową
PublikacjaPraca jest poświęcona metodzie identyfikacji prędkości fali elek-tromagnetycznej na podstawie analiz dyfrakcji spowodowanych obecnością inkluzji w przegrodach budowlanych żelbetowych, ceglanych oraz zespolonych żelbetowo-ceglanych. Wyprowadzono trzy modele matematyczne opisujące dyfrakcje charakterystyczne dla inkluzji kołowej, pionowej inkluzji przy powierzchni skanowa-nia oraz granicy między dwoma ośrodkami, w którym jednym z...
-
Implementacja metody dojrzałości do oceny wytrzymałości betonu przęsła mostu extradosed
PublikacjaArtykuł przedstawia wybrane informacje dotyczące metody dojrzałości z odniesieniem się do niektórych dokumentów normatywnych polskich i zagranicznych. Przedstawione są także informacje o urządzeniach stosowanych in situ do oceny wczesnej wytrzymałości betonu. Praca poświęcona jest implementacji monitoringu dojrzewania betonu wysokowartościowego (C 60/75) wbudowanego w przęsło mostu extradosed z zastosowaniem metody dojrzałości....
-
Influence of an applied bearing system on behaviour of multi-span footbridge
PublikacjaThe cycle overpass in Gdynia is a box structure over 300 metres long, 10-span. It was opened for bicycle traffic in the second half of 2013. At the end of its construction, there was failure due to excessive horizontal displacement of the system. A number of bearings exceeded the range of permissible transverse shifts thus it was necessary to temporarily protect the spans from slipping. The FEM analysis of the original solution...
-
Influence of selected additives and admixtures on underwater concrete and the environment
PublikacjaThe intensive civilization development has an influence on searching for new possibilities connected with extension of city agglomerations, both the areas of flat building and the industrial areas. One of the most interesting solution is to use water reservoirs, rivers and sea areas. The extension of buildings has an influence on building materials, especially hydrotechnical, which means development of production of hydrotechnical...
-
KOMPOZYTOWY MOST DLA PIESZYCH OD KONCEPCJI DO WDROŻENIA
PublikacjaW pracy przedstawiono historię powstania pierwszej zaprojektowanej i wykonanej przez polski zespół jednoelementowej kładki wytworzonej w całości z kompozytów polimerowych FRP. Konsorcjum realizujące projekt tworzyli: Politechnika Gdańska (lider), Wojskowa Akademia Techniczna i firma Roma Sp. z o.o. Przedsięwzięcie, któremu nadano akronim FOBRIDGE, zostało zrealizowane dzięki dofinansowaniu Narodowego Centrum Badań i Rozwoju o numerze:...
-
Lamb wave propagation in a single lap adhesive joint
PublikacjaThe aim of the paper is the analysis of Lamb wave propagation in adhesive joints. The research was performed on a single lap adhesive joint of two steel plates. Two types of joints, namely an intact and with defect were considered. In experimental investigations the condition assessment of the joint was performed with the use of antisymmetric Lamb waves excited by a plate piezo actuators and measured by a laser vibrometer. Numeri-cal...
-
Lamb wave-based monitoring of shear failure of an adhesive lap joint
PublikacjaThe paper presents a study on the elastic wave propagation in adhesive joints of steel plates subjected to tensile loading. A single lap joint was chosen for analysis because of its simplicity and plurality of applications. Experimental investigations consisted of the uniaxial extension of prepared specimens. Force and displacement values were recorded by a testing machine. Simultaneously, guided Lamb waves were excited and signals...
-
Linear Pantographic Sheets: Existence and Uniqueness of Weak Solutions
Publikacjawe address the well-posedness of the planar linearized equilibrium problem for homogenized pantographic lattices. To do so: (i) we introduce a class of subsets of anisotropic Sobolev’s space as the most suitable energy space E relative to assigned boundary conditions; (ii) we prove that the considered strain energy density is coercive and positive definite in E ; (iii) we prove that the set of placements for which the strain...
-
Load test of new European record holder in span length among extradosed type bridges
PublikacjaThe article presents acceptance load tests of a newly built extradosed MS-3 bridge located along the national road DK-16 near Ostróda (Poland). The structure features significant dimension in European reference scale. It is a new record holder in span length regarding this distinct bridge category. Its length ranges 206 m. Static and dynamic load tests were performed here. The program was extended by entire structural laser scanning...
-
Load testing of a suspended footbridge in Radom (Poland)
PublikacjaThe footbridge in Radom is a suspended bridge of an interesting architectural form. The structure was de-signed for 4 kN/m2 of crowd loading. Dynamic calculations were not included in the design. The structure’s acceptance tests took place on the 14th of October 2016. The behaviour of the footbridge in static testing met the expectations. Unfortunately, as a result of dynamic tests, dangerous behaviour of the footbridge was revealed....
-
Macierzowa analiza konstrukcji prętowych w środowisku MATLAB®
PublikacjaNiniejsza książka poświęcona jest metodzie przemieszeń w ujęciu macierzowym, znanej także pod nazwą bezpośredniej lub komputerowej metody przemieszczeń. Podejście to jest szczególnym przypadkiem metody elementów skończonych (MES), która jest od wielu lat powszechnie stosowana w działalności inżynierskiej, w tym do analizowania różnorodnych problemów mechaniki. Metoda przemieszczeń jest dedykowana rozwiązywaniu układów prętowych....
-
Metoda samoorganizacji i podążania za liderem roju nieholonomicznych robotów mobilnych z wykorzystaniem wirtualnych elementów sprężysto-tłumiących
PublikacjaCelem pracy jest demonstracja metody samoorganizacji i podążania za liderem nieholonomicznego roju robotów mobilnych, opartej na wirtualnych, tłumionych, liniowych sprężynach łączących sąsiadujące roboty. Analizę metody sterowania poprzedza wyprowadzenie dynamiki dwukołowego robota oraz określenie zależności między wirtualnymi siłami a wejściami sterującymi robota w celu osiągnięcia stabilnej formacji roju. Analizowane są dwa przypadki...
-
Mixed 4-node shell element with assumed strain and stress in 6-parameter theory
PublikacjaWe propose a mixed hybrid 4-node shell elements based on Hu-Washizu principle. Apart from displacements both strains and stress fields are treated as independent fields. The element is derived in the framework of a general nonlinear 6-field shell theory with drilling rotation which is dedicated to the analysis of multifold irregular shells with intersections. The novelty of the presented results stems from the fact that the measures...
-
Modal properties identification of a novel sandwich footbridge – Comparison of measured dynamic response and FEA
PublikacjaA modern sandwich composite footbridge made of high-tech materials, being an example of practical application of laminated composites in civil engineering, is presented. The in situ non-destructive testing of the footbridge, aiming to identify modal properties and pedestrian comfort, is described. The measured eigenmodes and eigenfrequencies are compared with numerically estimated values. Finite element analyses of the footbridge...