The effect of beech wood (Fagus sylvatica L.) steaming process on the colour change versus depth of tested wood layer - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

The effect of beech wood (Fagus sylvatica L.) steaming process on the colour change versus depth of tested wood layer

Abstrakt

The results of experimental research on the colour changes of beech wood at different depths of the tested layer are presented. Beech wood (Fagus sylvatica L.) dried in a conventional kiln was tested. Half of the wood samples were steamed prior to the drying process. Colour changes were measured at various depths after the face milling process was used to remove the material to expose to the deeper surface. The colour changes were measured based on the three-axis CIELAB system, recommended by CIE (Comission Internationale de l'Eclairage) and according to ISO 11664-2 and ISO 11664-4 standards. As a result of the analysis, four parameters were determined: the colour changes (ΔE), the colour chroma (Cab), the hue angle (h) and the colour saturation (Sab). The performed experimental research revealed that the surface of steamed wood is more susceptible to colour change. A significant colour change in both steamed and dried wood occurs only up to a depth of about 2 mm.

Cytowania

  • 1 1

    CrossRef

  • 0

    Web of Science

  • 8

    Scopus

Autorzy (5)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 87 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY-NC-ND otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Wood Material Science & Engineering nr 17, strony 451 - 458,
ISSN: 1748-0272
Język:
angielski
Rok wydania:
2022
Opis bibliograficzny:
Konopka A., Chuchała D., Orłowski K., Tatiana V., Klement I.: The effect of beech wood (Fagus sylvatica L.) steaming process on the colour change versus depth of tested wood layer// Wood Material Science & Engineering -Vol. 17,iss. 6 (2022), s.451-458
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1080/17480272.2021.1942200
Źródła finansowania:
  • Publikacja bezkosztowa
Weryfikacja:
Politechnika Gdańska

wyświetlono 162 razy

Publikacje, które mogą cię zainteresować

Influence of steam drying process on wood mechanical properties

2012

Predicting cutting power for band sawing process of pine and beech wood dried with the use of four different methods

2020

Deformation and Surface Color Changes of Beech and Oak Wood Lamellas Resulting from the Drying Process

2020

THE EFFECT OF DRYING INTENSITY ON THE COLOR CHANGES OF PINE WOOD (PINUS SYLVESTRIS L.)

2020
Meta Tagi