Filters
total: 898
filtered: 814
Search results for: FIBRE-REINFORCED CONCRETE
-
Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibres isolated from waste plant biomass such as hemp
Publication -
Strength parameters of polyester reinforced PVC coated fabric after short term creep loading in biaxial mode
PublicationThis study addresses the analysis of tensile strength parameters of the technical fabric VALMEX, which is composed of two orthogonal polyester thread families (named the warp and fill) and both sides PVC coated. The material was firstly subjected to 48-hour biaxial creep loading with the equal stress level in both orthogonal directions of the fabric. The stress levels were established as follows: 4.6 kN/m, 10.4 kN/m, 16.4 kN/m,...
-
Instrumentation optical fibres for wave transformation, signal processing, sensors, and photonic functional components, manufactured at Białystok University of Technology in Dorosz Fibre Optics Laboratory
Publication -
The influence of texturing of the surface of concrete substrate on its adhesion to cement mortar overlay
Publication -
The quality management in precast concrete production and delivery processes supported by association analysis
Publication -
Investigation of Durability Properties for Lightweight Structural Concrete with Hemp Shives Instead of Aggregate
Publication -
Application of extended Finite Element Method to cracked concrete elements - numerical aspects
PublicationArtykuł omawia zastosowanie rozszerzonej metody elementów skończonych do zarysowanych elementów betonowych. Obliczenia wykonano dla elementów poddanych zginaniu i mieszanemu ściskaniu - rozciąganiu. Wyniki porównano z doświadczeniami.
-
Impact of reclaimed asphalt pavement (RAP) on low-temperature properties of asphalt concrete
PublicationHot mix recycling is a practice which enables reusing materials from old asphalt pavements. Current Polish regulations allow usage of RAP only for binder and base courses, and its amount is limited. Asphalt mixtures with RAP material have to fulfil requirements stated for typical asphalt mixtures. The research presents low-temperature properties of twelve different asphalt concretes with RAP material, determined using three-point...
-
Discrete modeling of micro-structure evolution during concrete fracture using DEM
PublicationW artykule pokazano wyniki dyskretne DEM dla betonu poddanego ściskaniu i rozciąganiu jednoosiowemu. Wyniki siła-przemieszczenie i zarysowania porównano z doświadczeniami. Szczególną uwagę zwrócono na zjawiska mikrostrukturalne podczas zarysowania na poziomie kruszywa.
-
Modelling of size effects in concrete using elasto-plascity with non-local softening
PublicationArtykuł przedstawia numeryczne symulacje MES efektów skali w materiałach kruchych takich jak beton , wykonane w warunkach płaskiego stanu odkształceń. Materiał był modelowany w ramach sprężysto-plastyczności z izotropowym wzmocnieniem i osłabieniem. W obszarze ściskania przyjęto liniowe kryterium Druckera-Pragera z niestowarzyszonym prawem płynięcia a w obszarze rozciągania liniowe kryterium Rankina ze stowarzyszonym prawem płynięcia....
-
Effect of aggregate structure on fracture process in concrete using 2D lattice model
PublicationArtykuł przedstawia symulacje rys w betonie przy zastosowaniu nowego modelu siatkowego. Zbadano wpływ rozkładu i wielkości kruszywa oraz wpływ strefy kontaktu na nośność i propagacje rys. Obliczenia były dwuwymiarowe.
-
Measurements and calculations of the width of the fracture process zones on the surface of notched concrete beams
PublicationArtykuł omawia wyniki pomiaru i analizy numerycznej szerokości strefy pękania w belkach betonowych z nacięciem. Do pomiarów zastosowano metodę DIC. Do symulacji zastosowano model sprężysto - plastyczny i model z degradacją sztywności. Oba modele zostały rozszerzone o nielokalne osłabienie. Wyniki symulacji porównano z doświadczeniami.
-
DEM modelling of concrete fracture based on its structure micro-CT images
PublicationW rozdziale książki zawarto numeryczne wyniki mezoskopowe dotyczące postępującego pękania betonu na poziomie kruszywa. Do badania procesu pękania belki betonowej z karbem w trzech (3D) i dwóch (2D) wymiarach zastosowano metodę elementów dyskretnych (DEM). Niejednorodność betonu uwzględniono stosując czterofazowy opis: kruszywo, zaprawa, makropustki i międzyfazowe strefy przejściowe. W obliczeniach DEM na podstawie zdjęć rentgenowskich...
-
The effect of aggregate characteristics on the fracture behaviour of fine-grained concrete under tensile loading
PublicationArtykuł przedstawia analizę wpływu kruszywa na zjawisko pękania drobnoziarnistego betonu podczas quasi-statycznego trzypunktowego zginania. Beton został opisany jako stochastyczny i niejednorodny materiał trzyfazowy. Dwuwymiarowe obliczenia numeryczne dla betonowych belek z nacięciem wykonano metodą elementów skończonych stosując izotropowy materiałowy model z degradacją sztywności rozszerzony o długość charakterystyczną mikrostruktury...
-
Numerical studies on size effects in concrete beams. Architecture Civil Engineering Environment ACEE
PublicationW artykule przedstawiony wyniki obliczeń efektów skali w belkach betonowych podczas zginania. Zastosowano model sprężysto-plastyczny z nielokalnym osłabieniem. Rozkład wytrzymałości na rozciąganie był stochastyczny - przestrzennie skorelowany. Belki były geometrycznie podobne. Wyniki porównano z modelem efektu skali Bazanta.
-
Behaviour of asphalt concrete in cyclic and static compression creep test with and without lateral confinement
PublicationArtykuł przedstawia wpływ metodyki badań na określanie parametrów betonu asfaltowego. Wykazano, że badania pełzania bez skrępowania bocznego w większym stopniu uwypuklają wpływ asfaltu na parametry badanego betonu asfaltowego natomiast w badaniach ze skrępowaniem bocznym, zarówno rola asfaltu jak i szkieletu mineralnego jest uwzględniana przy ocenie parametrów betonu asfaltowego. Ponadto wykazano, że lepszymi miarami do oceny betonu...
-
The Effect of Texturing of the Surface of Concrete Substrate on the Pull-Off Strength of Epoxy Resin Coating
Publication -
Effect of Nano-SiO2 on the Microstructure and Mechanical Properties of Concrete under High Temperature Conditions
Publication -
Automatic strength assessment of the virtually modelled concrete interfaces based on shadow-light images
Publication -
The role of tricalcium aluminate and gypsum dehydration level in cement for effective air entrainment of concrete
Publication -
Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition
Publication -
Gypsum dehydration in cement and its impact on air-void structure in air-entrained concrete
Publication -
Evaluation of effectiveness of hydrated lime additive in protecting asphalt concrete against water and frost
PublicationArtykuł przedstawia wyniki badań laboratoryjnych odporności betonu asfaltowego z dodatkiem wapna hydratyzowanego na działanie wody i mrozu. Niszczące oddziaływanie wody i mrozu oceniano przez zestawienie wytrzymałości na pośrednie rozciąganie i modułu sztywnosci sprężystej przed i po laboratoryjnej symulacji działania wody i mrozu zmodyfikowaną metodą Lottmana. Działanie 2 środków adhezyjnych (wapna hydratyzowanego i aminu tłuszczowego)...
-
Numerical investigations of size effects in notched and un-notched concrete beams under bending
PublicationW artykule przedstawiono wyniki numerycznej analizy efektów skali (efektu deterministycznego i stochastycznego) w belkach betonowych z nacięciem i bez nacięcia poddanych zginaniu z uwzględnieniem lokalizacji odkształceń. Obliczenia wykonano przy zastosowaniu metody elementów skończonych i sprężysto-plastycznego modelu z nielokalnym osłabieniem. Pokazano wpływ wielkości belek betonowych na ich nośność oraz rozkład lokalizacji odkształceń.
-
Effect of steel fibres on concrete behavior in 2D and 3D simulations using lattice model.
PublicationW artykule przedstawiono wyniki numerycznej symulacji betonu zbrojonego włóknami stalowymi. Beton został opisany w skali mezo jako materiał 3-fazowy przy zastosowaniu modelu sieciowego. Obliczenia wykonano dla rozciągania jednoosiowego. Porównano ze sobą wyniki dwu- i trójwymiarowe.
-
Experimental investigations of strain localization in concrete using Digital Image Correlation (DIC) technique
PublicationW artykule przedstawiono wyniki pomiarów tensora odkształceń w belkach betonowych podczas zginania. Pomiary stref pękania wykonano przy zastosowaniu techniki fotooptycznej DIC.
-
Simulation of fracture process in concrete elements with steel fibres using discrete lattice model
PublicationArtykuł omawia wyniki modelowania procesu zarysowania w elementach betonowych zawierające stalowe włókna przy zastosowaniu dyskretnego modelu kratownicowego. Beton był modelowany na poziomie mezoskali z uwzględnieniem 5 faz: kruszywa, zaczynu cementowego, włókien i obu stref kontaktu. Obliczenia wykonano dla jednoosiowego ściskania, jednoosiowego rozciągania i zginania prostego.
-
Experimental investigations of fracture process in concrete by means of x-ray micro-computed tomography
PublicationW artykule pokazano doświadczalne wyniki badań procesu pękania w betonie stosując mikro-tomografię. Doświadczenia wykonano dla zginanych belek betonowych. Wyniki doświadczalne modelowano stosując MES na bazie modelu z degradacją sztywności sprężystej z nielokalnym osłabieniem. Beton symulowano jako materiał 4-fazowy. Uzyskano dobra zgodność wyników MES z doświadczeniami.
-
Effect of water infiltration through concrete block spillways on the slope stability of earth overflow dams
Publication -
FE analysis of strain localization in concrete in elasto-plasticity and damage mechanics with non-local softening
PublicationW artykule przedstawiono wyniki symulacji numerycznych zjawiska lokalizacji odkształceń w betonie wykonanaych przy zastosowaniu metody elementów skończonych (MES). Do opisu betonu wykorzystano dwa prawa materiałowe zdefiniowane w ramach teorii plastyczności (kryterium Druckera-Pragera w ściskaniu i warunek Rankine'a w rozciąganiu) oraz mechaniki uszkodzeń w sformułowaniu odkształceniowym. Dla poprawnego opisu lokalizacji (regularyzacji...
-
Modelling and parameter identification of steel–concrete composite beams in 3D rigid finite element method
Publication -
Bacterial Inactivation on Concrete Plates Loaded with Modified TiO2 Photocatalysts under Visible Light Irradiation
Publication -
Mechanical Strength and Thermal Properties of Cement Concrete Containing Waste Materials as Substitutes for Fine Aggregate
Publication -
An elasto-plastic constitutive model with non-local softening and viscosity to describe dynamic concrete behaviour.
PublicationW artykule zaproponowano model do opisu betonu podczas dynamicznego obciążenia. Przyjęto model sprężysto-plastyczny z degradacją sztywności i nielokalnym osłabieniem rozszerzony o lepkość. Obliczenia MES dla elementów betonowych pod obciążeniem dynamicznym o różnej prędkości obciążenia porównano z doświadczeniami.
-
Two - scale model for concrete beams subjected to three point bending - numerical analyses and experiments
PublicationArtykuł omawia dwu-skalowe podejście do betonu przy wykorzystaniu połączonych modeli. Metodę elementów skończonych zastosowano na poziomie makro. Na poziomie mikro zastosowano metodę elementów dyskretnych. Macierz sztywności wyznaczono na podstawie tensora naprężeń wyznaczonego w skali mikro. Wyniki numeryczne dw-skalowe porównano z wynikami dyskretnymi dla całego obszaru.
-
Comparative DEM calculations of fracture process in concrete considering real angular and artificial spherical aggregates
PublicationArtykuł omawia wyniki obliczeń numerycznych pękania dla betonu stosując metodę elementów dyskretnych (DEM). Beton był opisany jako materiał 4-fazowy i był poddany zginaniu. Zbadano wpływ kształtu kruszywa na proces pekania i na zalezność obciązenia od ugięcia. Wyniki dwuwymiarowe i trzywymiarowe porównano bezpośrednio z doświadczeniami. Wyniki pokazały duzy wpływ kształtu kruszywa na wyniki numeryczne.
-
Experimental and numerical assessment of size effect in geometrically similar slender concrete beams with basalt reinforcement
PublicationW artykule przedstawiono doświadczalne i numeryczne wyniki badań efektu skali w geometrycznie podobnych smukłych belkach betonowych ze zbrojeniem bazaltowym. Doświadczenia zostały symulowane stosując metodę elementów skończonych w oparciu o model sprężysto-plastyczny z degradacją sztywności i nielokalnym osłabieniem. Otrzymano dobrą zgodność wyników doświadczalnych z numerycznymi.
-
Experimental and numerical investigations of concrete behaviour at meso-level during quasi-static splitting tension.
PublicationArtykuł omawia wyniki numeryczne dotyczące pękania betonu uzyskane stosując metodę elementów dyskretnych. Dwuwymiarowe obliczenia wykonano dla próbek betonowych podczas rozłupywania. Beton został opisany jako model 4-fazowy. Mikrostruktura betonu odpowiadała zdjęciom tomograficznym. Zbadano wpływ warunków brzegowych na proces pękania. W obliczeniach zwrócono uwagę na porzebieg zjawisk mikrostrukturalnych przebieg pękania. Wyniki...
-
Fracture evolution in concrete compressive fatigue experiments based on X-ray micro-CT images
PublicationArtykuł omawia ewolucje pękania w betonie podczas cyklicznego ściskania betonu. Przestrzenną ewolucję pękania zobrazowano stosując mikro-tomograf rentgenowski. Zdjęcia wykonano dla różnych cykli zmęczeniowych. Wyniki porównano z testami monotonicznymi. Jakościowa ewolucja objętości pękania ze wzrostem zmęczeniowego zniszczenia pokazała silnie nieliniowy kształt.
-
The novel cannabinoid CB1 receptor neutral antagonist AM4113 suppresses ood intake and food-reinforced behavior but does not induce signs of nausea in rats
PublicationPrzeprowadzone badania biochemiczne wykazują, że związek AM4113 wiąże się z receptorem kanabinoidowym CB1, ale nie wykazuje właściwości odwrotnego agonisty (między innymi nie wpływa na powstawanie cyklicznego AMP). W testach na swobodne przemieszczanie się szczurów i znieczulenie związek AM4113 osłabia wpływ agonisty AM411 na receptor CB1. AM4113 wpływa na zachowanie szczurów związane z karmieniem oraz powoduje spadek łaknienia...
-
Experimental validation of the use of energy transfer ratio (ETR) for damage diagnosis of steel-concrete composite beams
Publication -
Parametric FE studies on a coupled energetic-statistical size effect in plain concrete beams under bending
PublicationW artykule omówiono wyniki połączonego deterministyczno-statystycznego efektu skali w betonowych belkach podczas zginania. Obliczenia wykonano stosując MES w zakresie sprężysto-plastyczności z nielokalnym osłabieniem. Obliczenia wykonano dla różnych długości korelacji i współczynnika zmienności.
-
Calculations of fracture process zones on meso-scale in notched concrete beams subjected to three-point bending.
PublicationW artykule przedstawiono wyniki numeryczne MES modelowanie belek betonowych z nacięciem na poziomie skali mezo. Beton został opisany na poziomie skali mezo jako stochastyczny materiał 3-składnikowy złożony z kruszywa, zaczynu cementowego oraz stref kontaktu. Obliczenia wykonano przy wykorzystaniu modelu degradacji sztywności z nielokalnym osłabieniem. Zbadano wpływ stochastycznego rozkładu kruszywa, średnicy, kształtu oraz zagęszczenia...
-
Application of enhanced elasto-plastic damage models to concrete under quasi-static and dynamic cyclic loading
PublicationArtykuł omawia wyniki symulacji zachowania sie elementów betonowych poddanych zginaniu w czasie cyklicznego obciążenia. Do symulacji zastosowano 3 połączone modele sprężysto-plastyczne z degradacją sztywności i z nielokalnym osłabieniem. Wyniki symulacji porównano bezpośrednio z doświadczeniami.
-
Analysis of concrete behaviour under cycling within coupled elasto-plastic-damage with non-local softening
PublicationArtykuł omawia wyniki symulacji zachowania sie elementów betonowych poddanych cyklicznemu obciążeniu. Do symulacji zastosowano 3 połączone modele sprężysto-plastyczne z degradacją sztywności i z nielokalnym osłabieniem. Wyniki symulacji porównano z doświadczeniami laboratoryjnymi..
-
FE-analysis of the beaviour of concrete elements with coupled elasto-plastic-damage models with non-local softening
PublicationArtykuł omawia wyniki symulacji zachowania sie elementów betonowych poddanych cyklicznemu obciążeniu. Do symulacji zastosowano połączone modele sprężysto-plastyczne z degradacją sztywności i z nielokalnym osłabieniem. Wyniki symulacji porównano z doswiadczeniami.
-
FE-modelling of concrete behaviour under mixed mode conditions with non-local and cohesive constitutive models.
PublicationW artykule przedstawiono wyniki symulacji rys zaokrąglonych w elementach betonowych w warunkach mieszanego sposobu obciążenia. Symulacje wykonano przy zastosowaniu modelu rys kohezyjnych i modeli mechaniki ośrodka ciągłego z nielokalnym osłabieniem.. Wyniki symulacji porównano z doświadczeniami.
-
Coupled DEM/CFD analysis of impact of free water on the static and dynamic response of concrete in tension regime
PublicationW tym artykule zbadano numerycznie quasi-statyczne i dynamiczne zachowanie częściowo nasyconego płynem betonu w warunkach dwuwymiarowego (2D) jednoosiowego rozciągania w mezoskali. Obliczono, jaki wpływ ma zawartość wolnego płynu porowego (gazu i wody) na proces pękania i wytrzymałość betonu w rozciąganiu. Do symulacji zachowania betonu całkowicie i częściowo nasyconego płynem w warunkach quasi-statycznych i dynamicznych wykorzystano...
-
Modelling of Capillary Pressure-driven Water Flow in Unsaturated Concrete Using Coupled DEM/CFD Approach.
PublicationSformułowano nowatorskie, połączone podejście do modelowania dwufazowego przepływu wody napędzanego kapilarami w nienasyconym betonie. Dzięki połączeniu metody elementów dyskretnych (DEM) z obliczeniową dynamiką płynów (CFD) w warunkach izotermicznych proces został zbadany numerycznie w mezoskali w warunkach dwuwymiarowych. Niewielkie próbki betonu o uproszczonej mezostrukturze cząstek poddano w pełni sprzężonym hydromechanicznym...
-
Comparison of continuous and discontinuous constitutive models to simulate concrete behaviour under mixed mode failure conditions
PublicationW artykule porównano modele MES ciągłe i nieciągłe do symulacji zachowania betonu w warunkach mieszanego zniszczenia. W ramach modeli ciągłych zastosowano modele sprężysto-plastyczne oraz modele z redukcją sztywności sprężystej i nielokalnym osłabieniem. W ramach modeli nieciągłych zastosowano XFEM. Przedmiotem obliczeń były strefy lokalizacji i rysy w warunkach mieszanego zniszczenia wg testu doświadczalnego Nooru-Mohameda.