Search
Search results for: ECOLOGY, HYDROPOWER, BEARING SYSTEMS, WATER LUBRICATION
-
Ecological bearing systems for water turbines – research and development at Gdansk University of Technology
PublicationIncreasing requirements for environmental protection make it necessary to introduce new materials and designs. Hydroelectric power plants operating in direct contact with water reservoirs and rivers are potentially endangering water cleanliness, hence they should also be modernized in the way minimizing the environmental hazards. A lot of progress in this field has been achieved in last decades, but still there is much work to...
-
Marine propeller shaft bearings under low-speed conditions: water vs. oil lubrication
PublicationThe bearings used in shipbuilding, hydropower, and water pumps have undergone a metamorphosis in recent decades. Because of environmental regulations, lubrication with grease or mineral oil is prohibited. Thus, the standard solutions include water-lubricated bearings with polymer bushings or sealed systems lubricated with oil. When properly designed, assembled, and operated, bearings can operate reliably for years. However, specific...
-
Magdalena Gajewska prof. dr hab. inż.
PeopleMagdalena Gajewska (born June 1th 1968 in Gdańsk) in 1993 graduated Hydro-Engineering Faculty at Gdańsk University of Technology. At present she is an assistant professor in the Department of Water and Wastewater Technology at the Faculty of Civil and Environmental Engineering GUT. PhD (2001) and habilitation (2013) in the discipline of environmental engineering. In the 2016-2020 term, serves as Vice -dean for science. She...
-
Experimental research on a hydrodynamic thrust bearing with hydrostatic lift pockets: Influence of lubrication modes on bearing performance
PublicationThe aim of the study is to investigate the performance of a thrust bearing equipped with hydrostatic lift pockets under different lubrication modes. Three types of flat land bearing lubrication modes are studied experimentally: hydrostatic lubrication (HS; forced oil injection to the pockets), hybrid lubrication (HS + HD; hydrostatic lubrication combined with the external forced bearing oil supply) and hydrodynamic lubrication...
-
Experimental Research on Insufficient Water Lubrication of Marine Stern Tube Journal Bearing with Elastic Polymer Bush
PublicationWater-lubricated bearings with polymer bushes are steadily gaining popularity due to their advantages, including environmental friendliness, relatively simple construction and long-term operation. Nevertheless, in practice instances of damage to such bearings occur due to insufficient or absent flow of the lubricating agent. In this study, experimental tests established that elastic polymer bush bearing is capable of operating...
-
Hydro Lubricants: Water-based lubricants for hydropower applications
PublicationSeveral different base oil types exist in the market including mineral and synthetic oils (e.g. polyalphaolefins, ester, polyglycol, etc.) and are currently widely in use. Although synthetic oils have drawn great attention over the past few decades in terms of their tribological benefits, mineral oils are still widely used in hydropower applications due primarily to their low cost and easy miscibility with other oils. However,...
-
Wojciech Litwin dr hab. inż.
People1992÷1996 - study on Mechanical Department at Gdansk University of Technology1996 – employed in the Faculty of Ocean Engineering and Ship Technology at the Gdansk University of Technology2004 – PhD2014 – habilitation2016 - vice dean for science at Faculty of Ocean Engineering2020 - dean of the Faculty of Ocean Engineering2021 - head of Institute of Naval Architecture He participated in a number of designing and research programs...
-
Assessment of the Current Potential of Hydropower for Water Damming in Poland in the Context of Energy Transformation
PublicationThe present paper indicates that hydropower, including small hydropower plants (SHPs), may play a very important role in Poland’s energy transformation in the near future. The development of SHPs may also increase water resources in the steppe Poland. Additionally, the aim of the present research is to conduct the PEST analysis of SHPs in Poland, taking into account the SHP potential. For the first time, maps showing the power...
-
The influence of polymer bearing material and lubricating grooves layout on wear of journal bearings lubricated with contaminated water
PublicationThe goal of the present paper is to investigate wear properties of journal sliding bearing operating in the conditions of contaminated water lubrication. Several bearing materials and bearing sleeve designs (differing in the axial grooves position and their shape) were tested experimentally under typical operating conditions in a dedicated test rig, which was equipped with a lubricating system, enabling lubrication with contaminated...
-
Influence of Lubrication Water Contamination by Solid Particles of Mineral Origin on Marine Strut Propeller Shafts Bearings of Ships
PublicationThe stern tube or strat bearings are key important component for safety of shipping. Modern global regulations required a low as possible negative impact on environment including lubricants leaking to the sea. The ship owners are looking for reliable and durable solutions. The costs of each ship components are carefully studied. The water lubricated bearings for ship propeller shafts are an environmentally friendly solution. That...
-
WATER LUBRICATED MAIN SHAFT BEARINGS - MODERN SOLUTION FOR HYDROPOWER INDUSTRY - Experimental and theoretical studies
PublicationWater-lubricated bearings are finding increasingly wide use in various branches of industry. As such, they may also be encountered in hydro power industry. They are also increasingly frequently employed in bearing systems of marine shaft propulsions and water pumps [1]. This rising popularity is due to a number of reasons [2]. First of all, their simple construction has direct impact on the level of pricing which is usually quite...
-
Experimental research on water lubricated three layer sliding bearing with lubrication grooves in the upper part of the bush and its comparison with a rubber bearing
Publicationcomposite. Eachofitslayershasanimportantfunction.Speciallypreparedslidingsurfaceensures minimum resistance.Followingrunning-initssmoothnessbecomesveryhighandthebearingmay continue workingunder fluid lubricationregime.NBRlayerensuresbearingelasticity,goodvibration damping propertiesandinsusceptibilitytoshaftaxismisalignment.Theexternalbrasslayermakes fitting thebearingeasier. Experiment resultsoftheconductedresearchwerecomparedwiththoseforarubberbearingof similar...
-
ANALYSIS OF THE LOAD-CARRYING CAPACITY OF A HYDRODYNAMIC WATER-LUBRICATED BEARING IN A HYDROELECTRIC POwER PLANT
PublicationThe paper presents an analysis of the load-carrying capacity of a historic hydrodynamic water-lubricated radial bearing of an unconventional segment design installed in the Braniewo Hydroelectric Power Plant. The aim of the calculations was to determine whether the bearing operates in the conditions of hydrodynamic or mixed lubrication, as well as to establish the optimal geometry of the axial grooves allowing for the highest load-carrying...
-
Influence of local bush wear on water lubricated sliding bearing load carrying capacity
PublicationOne of main problems concerning water-lubricated bearings is their durability. There are known cases of bearings with life time measured in decades, and some, whose refurbishment was necessary just days after start-up. Obtaining stable fluid film friction plays key role in the durability of these bearings. Unfortunately, their load-carrying capacity is limited due to water's low-viscosity. The conducted experimental...
-
Viscoelastic lubrication on spherical slide bearing in impulsive unsteady motion.
PublicationNiniejsza praca przedstawia numeryczne i semi-analityczne wyznaczanie składowych wektora prędkości lepkosprężystego oleju, oraz wartości ciśnienia hydrodynamicznego i sił nośnych w sferycznym łożysku ślizgowym o zmieniającej się w czasie niesymetrycznej szczelinie smarnej podczas nieustalonego impulsywnego smarowania. Łożyska ślizgowe o czopach kulistych występują w maszynach transportowych w celu lepszego manewrowania ustawieniem...
-
Water-lubricated stern tube bearing - experimental and theoretical investigations of thermal effects
PublicationThe paper presents research results of thermal phenomena accompanying operation of a water-lubricated stern tube bearing with axial grooves. Experimental tests revealed, that intensity of forced axial flow has strong influence on bush temperature. Numerical simulations focused on investigation of the thermal phenomena under operation of water-lubricated journal bearing showed, that restricted axial flow promotes backflow of the...
-
New Generation of Water lubricated Foil bearing - Numerical Models and Experimental Verification
PublicationIn the paper a new idea of foil water lubricated bearing and methodology of hydrodynamic characteristics calculations is presented. To assesses the theoretical characteristics of these bearings two different computer models were built. First is structural model coupled with fluid model. It takes into account: fluid flow in the deformed fluid gap, specific design of bearing support and friction in bearing support. The second is...
-
Impact of Spatial Noise Correlation on Bearing Accuracy in DIFAR Systems
PublicationDIFAR type underwater passive systems are one of the more commonly used tools for detecting submarines. At the design stage, which usually uses computer simulations, it is necessary to generate acoustic noise of the sea. It has been shown that correlating noise significantly reduces these errors compared to the assumption that noise is uncorrelated. In addition, bearing errors have been shown to be the same in systems with a commonly...
-
Water and Ecology
Journals -
Stochastic model for turbulent lubrication of slide journal bearing in ship technology.
PublicationTurbulentny przepływ smarujący ma zastosowanie w obliczeniach praktycznych siły nośnej poprzecznego łożyska ślizgowego dla wysokich prędkości obrotowych przy liczbach Taylora przekraczających wartość 41,2 względnie przy zmodyfikowanych liczbach Reynoldsa o wartościach Re[psi]=2. Główne wyniki pracy koncentrują się na wykazaniu zmian wartości ciśnienia i siły nośnej poprzecznego łożyska ślizgowego w przypadku turbulentnego, izotemicznego...
-
Research on water lubricated main shaft bearings in conditions of improper lubrication and cooling conducted on high torque real-life scale bush test rig
PublicationWater lubricated polymer bushes find increasingly popular use in the sliding bearings of marine propellers, water turbines and pump shafts. Such popularity is partly due to their simple construction which also means relatively affordable price. In addition, properly designed and installed water lubricated bearings may well last for over a decade. However, in practical experience one may also observe cases of rapid wear...
-
Ecological bearing systems for water turbines - two research programs aimed at making water turbines more "eco-friendly".
PublicationW pracy opisano próby wyeliminowania ropopochodnych środków smarowych z układów łożyskowania turbin wodnych. Próby dotyczą zastosowania bezsmarowych łożysk kierownic i smarowanych wodą łożysk wałów turbin. Wprowadzanie bezsmarowych łożysk kierownic wymaga stworzenia metod prognozowania ich trwałości w warunkach małych oscylacji. Do stosowania w łożyskach wałów zaproponowano smarowane wodą łożyska ceramiczne o oryginalnej konstrukcji,...
-
Experimental research on water lubricated marine stern tube bearings in conditions of improper lubrication and cooling causing rapid bush wear
PublicationWater lubricated bearings are popular in sliding bearings of marine propeller shafts, turbines and pump shafts. Such popularity is partly due to their simple construction which also means a relatively affordable price. In practical experience one may also observe cases of rapid wear or even malfunctions of this bearings, some of which may be caused by insufficient flow of lubricant leading to overheating. The conducted...
-
total number and biomass of bacteria in drinking water distribution systems.
PublicationIn the vast water supply network using traditional methods of treatment it is often impossible to maintain a constant and acceptable microbiological quality of water. In Poland the main reason of bacterial re-growth is presence of organic matter and nutrients in the circulating water and prolonged water retention in the network systems due to the decrease of water consumption, which has been observed for the last 20 years. In the...
-
ATTEMPT AT EVALUATING THE INFLUENCE OF BENDING STRESS ON SHAFT WEAR PROCESSES IN WATER LUBRICATED SLIDING BEARING WITH A RUBBER BUSHING
PublicationWater lubricated bearings find increasingly wide application in shipbuilding or hydro–power industry, the popularity stemming from their numerous advantages. Unfortunately, as it turns out, water lubricated bearings do not always meet expectations, as on occasion they become subject to intense, premature wear which requires costly repair. One of the still unexplained phenomena is the process of excessive bearing wear, in particular...
-
BEARING SYSTEMS OF WIND TURBINES – MAINTENANCE PROBLEMS
PublicationW praktyce eksploatacyjnej turbin wiatrowych o tradycyjnej konstrukcji (przekładniowych) obserwowana jest duża awaryjność przekładni, a zwłaszcza łożysk tocznych szybkoobrotowych wałów przekładni. W Polsce na zlecenie właściciela dużej farmy wiatrowej, firmy Energa Wytwarzanie S.A., Politechnika Gdańska we współpracy z Politechniką Poznańską i Akademią Górniczo Hutniczą podjęły badania mające na celu diagnozowanie przyczyn uszkodzeń...
-
EVALUATING THE INFLUENCE OF BENDING STRESS ON A 1H18N9 STEEL SHAFT WEAR PROCESS IN A WATER LUBRICATED SLIDING BEARING WITH A RUBBER BUSHING
PublicationThe issue of excessive wear of shaft journals co-working with a rubber bearing has been unexplained so far. Premature and sometimes very intensive wear of ship sliding bearings in water conditions is the reason for carry out very expensive and more frequent than expected repairs. The authors (E. Piątkowska, W. Litwin) made an attempt to find a case that influences the value of this wear described in the paper “Attempt at Evaluating...
-
Multiobjective Water Distribution Systems Control of Pumping Cost, Water Quality, and Storage-Reliability Constraints
PublicationThis work describes a multiobjective model for trading-off pumping cost and water quality for water distribution systems operation. Constraints are imposed on flows and pressures, on periodical tanks operation, and on tanks storage. The methodology links the multiobjective SPEA2 algorithm with EPANET, and is applied on two example applications of increasing complexity, under extended period simulation conditions and variable energy...
-
Multi-objective optimization of water quality, pumps operation, and storage sizing of water distribution systems
PublicationA multi-objective methodology utilizing the Strength Pareto Evolutionary Algorithm (SPEA2) linked to EPANET for trading-off pumping costs, water quality, and tanks sizing of water distribution systems is developed and demonstrated. The model integrates variable speed pumps for modeling the pumps operation, two water quality objectives (one based on chlorine disinfectant concentrations and one on water age), and tanks sizing cost...
-
Experimental tests of water lubricated marine rubber bearing
PublicationW referacie przedstawiono stosowane obecnie rodzaje łożysk gumowych smarowanych wodą. Omówiono ich zalety i wady.W drugiej części pracy przedstawiono wyniki badań eksperymantalnych typowego okrętowego łożyska gumowego. Uzyskane rezultaty porównano z wynikami badań łożysk z polimerową panwią.
-
Multi-Objective Water Distribution Systems Control of Pumping Cost, Water Quality, and Storage-Reliability Constraints
PublicationThis work describes a multi-objective model for trading-off pumping cost and water quality for water distribution systems operation. Constraints are imposed on flows and pressures, on periodical tanks operation, and on tanks storage. The methodology links the multi-objective SPEA2 algorithm with EPANET, and is applied on two example applications of increasing complexity, under extended period simulation conditions and variable...
-
Bio and slide biobearings, their lubrication by non-newtonian fluids and application in non-conventional systems. Vol. 2, The theory of human joint unsteady lubrication.
PublicationW monografii przedstawiono zasady niestacjonarnego smarowania stawów człowieka o odkształcalnych chrząstkach i powierzchniach kostnych w polach indukcji magnetycznej. W opisie stochastycznym uwzględnione zostały nienewtonowskie, lepkosprężyste właściwości cieczy synowialnych jako czynnika smarującego. Monografia prezentuje rozkłady wartości ciśnienia i nośności stawów człowieka w warunkach niestacjonarnego smarowania dla drgań...
-
Sustainability of Water Quality and Ecology
Journals -
Water hammer analysis in water supply systems
PublicationPrzedstawiono metodę analizy zjawiska uderzenia hydraulicznego w sieci pierścieniowej. Model matematyczny opisano za pomocą układu równań różniczkowych cząstkowych I stopnia, które przekształcono do układu równań zwyczajnych. Dla rozwiązania układu równań zastosowano metodę predykator-korektor. Podano odpowiednie równania różnicowe dla węzłów złożonych. Przedstawiono przykład obliczeniowy sieci wodociągowej pierścieniowej, składającej...
-
Bio and slide bearings, their lubrication by non-Newtonian oils and applications in non-conventional systems
PublicationProject MTK-CT-2005-2008-517226Praca opisuje główne kierunki badawcze projektu europejskiego ToK, którego autor jest koordynatorem z ramienia Politechniki Gdańskiej.
-
Start-up of a power unit of a thermal power plant auxiliary systems with supply from a hydropower plant
PublicationThis article discusses the issues related to a power unit of a thermal power plant start-up with the use of a hydropower plant. Hydropower plant can supply and will enable start-up of auxiliary equipment in a power unit of a thermal power plant. Due to high capacity of auxiliary drives, start-up of auxiliaries in a thermal power plant after blackout (and boiler shutdown) is not possible from emergency energy sources in the power...
-
Collagen and hyaluronic acid hydrogel in water-in-oil microemulsion delivery systems
PublicationThe efficacy of microemul-sion in dermal and transdermal delivery of active ingredients. Here, we assessed the water-in-oilmicroemulsion capacity to incorporate two natural polymers, i.e. collagen and hyaluronic acid withlow and high molecular weight. Systems were extensively characterized in terms of conductivity, phaseinversion studies, droplet diameter, polydispersity index and rheological properties. The results of thisresearch...
-
Water Solubilization Using Nonionic Surfactants from Renewable Sources in Microemulsion Systems
PublicationIn this study the effect of temperature, NaCl andoils (hydrocarbons: C8-C16) on the formation and solubilizationcapacity of the systems of oil/monoacylglycerols(MAG):ethoxylated fatty alcohols (CEO20)/propylene glycol(PG)/water was investigated. The effects of the surfactantmixture on the phase behavior and the concentration ofwater or oil in the systems were studied at three temperatures(50, 55, 60 C) and with varied NaCl solutions...
-
Monitoring of Chlorine Concentration in Drinking Water Distribution Systems Using an Interval Estimator
PublicationThis paper describes the design of an interval observer for the estimation of unmeasured quality state variables in drinking water distribution systems. The estimator utilizes a set bounded model of uncertainty to produce robust interval bounds on the estimated state variables of the water quality. The bounds are generated by solving two differential equations. Hence the numerical efficiency is sufficient for on-line monitoring...
-
Supervised Model Reference Adaptive Control of Chlorine Residuals in Water Distribution Systems
PublicationControl of integrated quality and quantity in Drinking Water Distribution Systems within recently proposed hierarchical framework is considered in the paper. A supervised nonlinear Indirect Model Reference Adaptive Controller is derived for the lower control level of the control structure to operate as the fast feedback controller of chlorine residuals in the monitored nodes. The major supervisor role is to manage switching between...
-
Robust output prediction of differential – algebraic systems – application to drinking water distribution system
PublicationThe paper presents the recursive robust output variable prediction algorithm, applicable for systems described in the form of nonlinear algebraic-differential equations. The algorithm bases on the uncertainty interval description, the system model, and the measurements. To improve the algorithm efficiency, nonlinear system models are linearised along the nominal trajectory. The effectiveness of the algorithm is demonstrated on...
-
Implementation of integrated control In drinking water distribution systems - IT system proposal
PublicationImplementation of integrated control algorithms requires suitable hardware and software platforms. Proposed solution must allow realizing control and monitoring tasks, while ensuring high reliability and security of processed data. Additionally, the software and hardware solutions must be immune to outside influence. This paper presents an approach to implementation of control systems in drinking water distribution system. Presented...
-
Optimised Robust Placement of Hard Quality Sensors for Robust Monitoring of Quality in Drinking Water Distribution Systems
PublicationA problem of optimised robust placement of the hard quality sensors in Drinking Water Distribution Systems under several water demand scenarios for robust quality monitoring is formulated. Numerical algorithms to solve the problem are derived. The optimality is meant as achieving at the same time a desired trade off between the sensor capital and maintenance costs and resulting robust estimation accuracy of the monitoring algorithm...
-
Two Time-Scale Hierarchical Control of Integrated Quantity and Quality in Drinking Water Distribution Systems
PublicationThe paper considers a feedback optimising control of drinking water distribution systems (DWDS). Although the optimised pump and valves scheduling and disinfectant injection control attracted considerable attention over last two decades most of the contributions were limited to an open-loop optimisation repetitively performed during the DWDS operation. Also, while a strong interaction between the water quantity and quality exists...
-
Optimised Allocation of Hard Quality Sensors for Robust Monitoring of Quality in Drinking Water Distribution Systems
PublicationA problem of optimised placement of the hard quality sensors in Drinking Water Distribution Systems for robust quality monitoring is formulated. Two numerical algorithms to solve the problem are derived. The optimality is meant as achieving a desired trade off between the sensor capital and maintenance costs and resulting robust estimation accuracy of the monitoring algorithm. The robust estimation algorithm recently developed...
-
Influence of Bearing Bush Geometry on Properties of Water Lubricated Marine Main Shaft Bearings
PublicationW pracy przedstawiono wpływ geometrii smarowanego wodą, okrętowego łożyska ślizgowego wału głównego na jego własności hydrodynamiczne.Wykazano, że wielkość luzu łożyskowego, położenie oraz liczba rowków smarnych mają znaczący wpływ na nośnosć łożyska.
-
Bio and slide biobearings, their lubrication by non-newtonian fluids and application in non-conventional systems. Vol. 1, Principles of human joint lubrication with non-newtonian liquids for deformable bone and cartilage in magnetic field
PublicationW monografii przedstawiono zasady smarowania stawów człowieka o odkształcalnych chrząstkach i powierzchniach kostnych w polach indukcji magnetycznej. Uwzględnione zostały nienewtonowskie, lepkosprężyste właściwości cieczy synowialnych jako czynnika smarującego. Monografia prezentuje rozkłady wartości ciśnienia i nośności stawów człowieka w warunkach niestacjonarnego smarowania dla drgań o różnych amplitudach i częstotliwościach...
-
An interval estimator for chlorine monitoring in drinking water distribution systems under uncertain system dynamics, inputs and chlorine concentration measurement errors
PublicationThe design of an interval observer for estimation of unmeasured state variables with application to drinking water distribution systems is described. In particular, the design process of such an observer is considered for estimation of the water quality described by the concentration of free chlorine. The interval observer is derived to produce the robust interval bounds on the estimated water quality state variables. The stability...
-
Optimizing control by robustly feasible model predictive control and application to drinking water distribution systems
PublicationThe paper considers optimizing Model Predictive Control (MPC) for nonlinear plants with output constraints under uncertainties. Although the MPC technology can handle the constraints in the model by solving constraint model based optimization task, satisfying the plant output constraints under the model uncertainty still remains a challenge. The paper proposes Robustly Feasible MPC (RFMPC), which achieves feasibility of the outputs...
-
RE-SHAPING THE LAND AND WATER CONNECTIONS AND ITS ROLE IN ACHIEVING LANDSCAPE AND ECOLOGICAL SYSTEMS’ CONTINUITY ON THE POST-INDUSTRIAL TERRITORIES
PublicationThis paper delves into recently applied strategies of creating new water areas and modifying the existing ones as a part of the transformation processes of post-industrial territories. It proves that while the pursuit for unique architectural and urban space values remains an important factor contributing to such modifications, they may also play an important role in reclaiming ecological systems continuity. On the basis of theoretical...