displaying 1000 best results Help
Search results for: COMPOSITE TUBE
-
COMPOSITE STRUCTURES
Journals -
The use of GFRP tubes as load-bearing jackets in concrete-composite columns
PublicationThe paper presents the fields of applications of polymer composites in building structures. The use of composite glass fibre tubes is discussed in more detail. The laboratory methods used to test the mechanical properties of these pipes are presented. An original research program is presented, including six concrete-filled glass fibre tubes. The cylinders and columns made in this way were tested for their axial load capacity. Conclusions...
-
COMPOSITES PART B-ENGINEERING
Journals -
Experimental Studies of Concrete-Filled Composite Tubes under Axial Short- and Long-Term Loads
PublicationThe paper presents experimental studies on axially compressed columns made of concrete-filled glass fiber reinforced polymer (GFRP) tubes. The infill concrete was C30/37 according to Eurocode 2. The investigated composite pipes were characterized by different angles of fiber winding in relation to the longitudinal axis of the element: 20, 55 and 85 degrees. Columns of two lengths, 0.4 m and 2.0 m, were studied. The internal diameter...
-
TUBA-AR
Journals -
POLYMER COMPOSITES
Journals -
Effect of tube bundle arrangement on performance of shell-and-tube latent heat storage system
PublicationThis work presents the results of experimental investigation on charging and discharging of latent heat storage systems (LHSS) in the form of shell-and-tube heat exchangers with a variable arrays of the tube bundles. The tests included two tube arrangements – in-line and triangular (staggered), a variable number of tubes in a bundle, two pitch ratios, and different tube positions in a bundle. Three commercial products (LTP56, RT54HC,...
-
COMPOSITE INTERFACES
Journals -
Visualization of water boiling in tube bundle
PublicationW pracy przedstawiono wyniki wizualizacji, za pomocą systemu laserowego noża świetlnego (PIV), wrzenia cieczy w pęku rur. Wykorzystanie systemu PIV umożliwiło analizę skomplikowanej struktury przepływu cieczy podczas wrzenia, a także wzajemnego oddziaływania pomiędzy sekcją grzejną a wrzącą cieczą.
-
COMPOSITES SCIENCE AND TECHNOLOGY
Journals -
Journal of Composites Science
Journals -
Composites Research
Journals -
Elastomers and Composites
Journals -
ADVANCED COMPOSITE MATERIALS
Journals -
APPLIED COMPOSITE MATERIALS
Journals -
JOURNAL OF COMPOSITE MATERIALS
Journals -
Performance of the CMS drift tube chambers with cosmic rays
Publication -
Wettability of Horizontal Stainless Steel Tube by Nanofluid Droplets
PublicationThe goal of the present work was the experimental determination of the contact angle of three nanofluids, i.e. water-Al2O3, water-Cu and water-TiO2 on horizontal stainless steel tube of 1.6 mm OD. Of particular interest was the effect of nanoparticle concentration (0.01%, 0.1%, and 1% by weight) on droplet contact angle.
-
Wettability of Horizontal Stainless Steel Tube by Nanofluid Droplets
PublicationThe goal of the present work was the experimental determination of the contact angle of three nanofluids, i.e. water-Al2O3, water-Cu and water-TiO2 on horizontal stainless steel tube of 1.6 mm OD. Of particular interest was the effect of nanoparticle concentration (0.01%, 0.1%, and 1% by weight) on droplet contact angle.
-
Tuber Quality
Publication -
Revue des Composites et des Materiaux Avances-Journal of Composite and Advanced Materials
Journals -
Heat transfer during pool boiling on smooth tube bundle
PublicationPrzedstawiono wyniki pomiarów współczynnika przejmowania ciepła dla pęku 19 gładkich rurek ze stali nierdzewnej ogrzewanych elektrycznie podczas wrzenia wody destylowanej, metanolu i R141b. Zaproponowano równanie korelacyjne do obliczania średniego współczynnika przejmowania ciepła.
-
Horizontal flow boiling of refrigerants inside porous coated tube.
PublicationPrzedstawiono wyniki badań przejmowania ciepła i spadku ciśnienia podczas wrzenia czynników chłodniczych R22, R134a i R407C w poziomej rurce z wewnętrzną powłoką porowatą.
-
Hydrodynamic functions of emulsion system agitated in the draft-tube reactor
PublicationPrzeprowadzono badania podstawowe sposobu wytwarzania emulsji w reaktorze pętlicowym z mieszaniem. Badano punkt inwersji faz oraz zapotrzebowanie mocy mieszania w zależności od składu emulsji. Zaobserwowano występowanie maksimum mocy mieszania w punkcie inwersji emulsji. Zaobserwowano liniową zależność prędkości cyrkulacji ciągłej fazy wodnej od częstości obrotów mieszadła śmigłowego.
-
Experimental research on marine oil-lubricated stern tube bearing
PublicationBearings of propeller shafts are very crucial elements of the propulsion system of each of the ships. The safety of shipping depends on their durability and reliability. The new legal restrictions mean that today we are looking for environmentally friendly solutions. That is why water-lubricated bearings are becoming more and more popular. So, will oil-lubricated shaft bearings belong to the past? The bearing with a white metal...
-
Thermal-Hydraulic Studies on the Shell-and-Tube Heat Exchanger with Minijets
PublicationIn this paper a patented design of a heat exchanger with minijets, with a cylindrical construction is presented. It is followed by the results of its systematic experimental investigations in the single-phase convection heat transfer mode. Based on these results, validation of selected correlations (coming from the literature) describing the Nusselt number was carried out. An assessment of the heat exchange intensification level...
-
Selected Problems of Experimental Testing Marine Stern Tube Bearings
PublicationThis paper presents typical methods for conducting experimental tests on main shaft slide bearings. There are described their possible testing capabilities, advantages, drawbacks and limitations. Various testing methods were analyzed to find a solution able of providing a wide range of possible investigations at possibly acceptable limitations.
-
Pool boiling of water-Cu nanofluid on porous coated tube
PublicationPrzedstawiono wyniki pomiarów współczynnika przejmowania ciepła podczas wrzenia nanocieczy woda-Cu na poziomej rurce pokrytej aluminiową powłoka porowatą o grubości 0.15 mm i porowatości ok. 40%. Koncentracja nanocząstek wynosiła 0.01%, 0.1% oraz 1%. Badania wykonano dla trzech wartości ciśnienia wrzenia: 200 kPa, 100 kPa oraz 10 kPa.
-
Thermal Energy Storage with PCMs in Shell-and-Tube Units: A Review
PublicationThe paper presents a survey of the experimental and numerical studies of shell-and-tube systems in which phase change material (PCM) is used. Due to the multitude of design solutions for shell-and-tube systems, the emphasis is placed on double-tube (DT), triplex-tube (TT), and multitube (MT) units. Additionally, only single-pass systems are considered. Particular attention is paid to the method of heat transfer intensification....
-
Sensitivity analysis of a composite footbridge
PublicationThis work include an example of sensitivity analysis for the design of a composite footbridge. A sandwich structure is used, consisting two high-strength skins separated by a core material. The analysis was conducted for two numerical models. The first one is a simple, single-span beam of a composite cross-section (laminate and foam), with different Young’s modulus for each material. Calculations were made by means of a MATLAB-based...
-
Modern GFRP Composite Footbridges
PublicationApplication of GFRP composites in civil engineering is still not large but already noticeable. Advantages of this material, such as: low volume weight, relatively high stiffness and strength, well fatigue resistance, easiness in shaping, high material damping and high environmental resistance, make it attractive for bridge and in particular foot-bridge designers. It is estimated that nowadays in the world there are realized hundreds...
-
Characterization of CaTi0.9Fe0.1O3/La0.98Mg0.02NbO4 composite
PublicationA composite of CaTi0.9Fe0.1O3 and electrolyte material, i.e. magnesium doped La0.98Mg0.02NbO4 was prepared and studied. The phase content and the sample microstructure was examined by an X-ray diffraction method and scanning electron microscopy. EDS measurements were done both for composite samples and the diffusion couple. The electrical properties were studied by four terminal DC method. The Ahigh-temperature interaction between...
-
On a flexomagnetic behavior of composite structures
PublicationThe popularity of the studies is getting further on the flexomagnetic (FM) response of nano-electro-magneto machines. In spite of this, there are a few incompatibilities with the available FM model. This study indicates that the accessible FM model is inappropriate when considering the converse magnetization effect that demonstrates the necessity and importance of deriving a new FM relation. Additionally, the literature has neglected...
-
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
Journals -
Preparation of a Ceramic Matrix Composite Made of Hydroxyapatite Nanoparticles and Polylactic Acid by Consolidation of Composite Granules
Publication -
Metachronous adenocarcinoma in a gastric tube after radical surgery for oesophageal cancer
Publication -
Performance of the CMS drift-tube chamber local trigger with cosmic rays
Publication -
Blind intubation through the supraglottic airway laryngopharyngeal tube with a biohazard suit
Publication -
Production of fine droplet emulsions in the agitated draft-tube column reactor
PublicationBadano rozkłady wielkości kropel emulsji woda - olej parafinowy w reaktorze dwukolumnowym z mieszaniem w kolumnie wewnętrznej jako strefie wznoszenia. Stosując model dyspersyjny w układzie zamkniętym z całkowitą recyrkulacją, wyznaczono obwodowe i strefowe współczynniki dyspersji
-
Evolution of post welded residual stress due multilayer circumferentialweld of tube.
PublicationOpisano sposób wykorzystania polowego efektu Barkhausena do pomiaru rozkładu naprężeń w spawanych rurach. Przedstawiono procedurę kalibracji oraz wyniki pomiaru naprężeń uzyskanych po stopniowym spawaniu rury.
-
In-tube extraction for the determination of the main volatile compounds in Physalis peruviana L
PublicationAn analytical procedure based on in-tube extraction followed by gas chromatography with mass spectrometry has been developed for the analysis of 24 main volatile components in cape gooseberry (Physalis peruviana L.) samples. According to their chemical structure, the compounds were organized into different groups: one hydrocarbon, one aldehyde, four alcohols, four esters, and 14 monoterpenes. By single-factor experiments, incubation...
-
Pool boiling of water-Al2O3 nanofliud on horizontal porous coated tube
PublicationPrzedstawiono wyniki badań przejmowania ciepła podczas wrzenia w dużej objętości nanocieczy woda-Al2O3 na poziomej rurce z aluminiową powłoką porowatą o grubości 0.15 mm i porowatości 40%. Koncentracja nanocząstek wnosiła 0.01%, 0.1% oraz 1%. Niezależnie od koncentracji współczynnik przejmowania ciepła przy wrzeniu nanocieczy był niższy niż przy wrzeniu wody destylowanej.
-
Performance of the domestic micro ORC equipped with the shell-and-tube condenser with minichannels
PublicationIn this paper, the original compact shell-and-tube heat exchanger with circular minichannels of in-house design and manufacturing is presented as the condenser for the domestic micro heat and power plant investigations as well as other future technical applications. The heat exchanger is equipped with turbulizing baffles inside the shell. The shell itself is made of a tubular sleeve having an inner diameter of 0.067 m and the length...
-
Effect of Tube Bundle Arrangement on the Performance of PCM Heat Storage Units
PublicationThe results of comprehensive study on charging and discharging of latent heat storage systems (LHSS) are presented. The multi tube shell-and-tube unit with a variable layouts of the tube bundles are examined. Two tube arrangements – in-line and staggered are tested. A variable number of tubes and different tube positions in a bundle are investigated. Moreover, two pitch ratios are studied. Three commercially available substances...
-
Mechanics of Advanced Composite Structures
Journals -
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
Journals -
CEMENT & CONCRETE COMPOSITES
Journals -
Journal of Polymer & Composites
Journals -
PLASTICS RUBBER AND COMPOSITES
Journals -
Composites and Advanced Materials
Journals