Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins - Publikacja - MOST Wiedzy

Wyszukiwarka

Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins

Abstrakt

Liquefaction of wood-based biomass gives different polyol properties depending on the reagents used. In this article, alder wood sawdust was liquefied with glycerol and poly(ethylene glycol) solvents. Liquefaction reactions were carried out at temperatures of 120, 150 and 170 °C. The obtained bio-polyols were analyzed in order to establish the process efficiency, hydroxyl number, acid value, viscosity and structural characteristics using Fourier transform infrared (FTIR), carbon (13C) and proton (1H) NMR analyses. The results indicate that the optimal conditions for the liquefaction process are at 150 °C for 6 h. The results of the FTIR spectra analysis and the hydroxyl number in the range of 214–687 mg KOH/g showed that the obtained bio-polyols are a potential substitute for petrochemical polyols commonly used for the synthesis of polyurethane polymers. Polyurethane resins containing 90 wt% of bio-polyol were obtained by a one-step method using a hydraulic press. The material was pressed for 15 min (5 MPa) at 100 °C with an NCO/OH ratio in the range of 0.9–1.2. Dynamic mechanical thermal analysis (DMA) showed high cross-linking density and modulus of elasticity in a wide range of 62–1362 MPa.

Cytowania

  • 3 0

    CrossRef

  • 0

    Web of Science

  • 3 1

    Scopus

Cytuj jako

Pełna treść

pełna treść publikacji nie jest dostępna w portalu

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
WOOD SCIENCE AND TECHNOLOGY nr 54, strony 103 - 121,
ISSN: 0043-7719
Język:
angielski
Rok wydania:
2020
Opis bibliograficzny:
Gosz K., Kowalkowska-Zedler D., Haponiuk J., Piszczyk Ł.: Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins// WOOD SCIENCE AND TECHNOLOGY -Vol. 54,iss. 1 (2020), s.103-121
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.1007/s00226-019-01152-6
Weryfikacja:
Politechnika Gdańska

wyświetlono 224 razy

Publikacje, które mogą cię zainteresować

Meta Tagi