Bio-Based Polyurethane Networks Derived from Liquefied Sawdust - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Bio-Based Polyurethane Networks Derived from Liquefied Sawdust

Abstrakt

The utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated. The liquefaction process was carried out at temperatures of 120, 150, and 170 C. The resulting bio-polyols were analyzed for process efficiency, hydroxyl number, water content, viscosity, and structural features using the Fourier transform infrared spectroscopy (FTIR). The optimum liquefaction temperature was 150 C and the time of 6 h. Comprehensive analysis of polyol properties shows high biomass conversion and hydroxyl number in the range of 238–815 mg KOH/g. This may indicate that bio-polyols may be used as a potential substitute for petrochemical polyols. During polyurethane synthesis, materials with more than 80 wt% of bio-polyol were obtained. The materials were obtained by a one-step method by hot-pressing for 15 min at 100 C and a pressure of 5 MPa with an NCO:OH ratio of 1:1 and 1.2:1. Dynamical-mechanical analysis (DMA) showed a high modulus of elasticity in the range of 62–839 MPa which depends on the reaction conditions.

Cytowania

  • 9

    CrossRef

  • 0

    Web of Science

  • 9

    Scopus

Autorzy (5)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 81 razy
Wersja publikacji
Accepted albo Published Version
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Materials nr 14,
ISSN: 1996-1944
Język:
angielski
Rok wydania:
2021
Opis bibliograficzny:
Gosz K., Tercjak A., Olszewski A., Haponiuk J., Piszczyk Ł.: Bio-Based Polyurethane Networks Derived from Liquefied Sawdust// Materials -Vol. 14,iss. 11 (2021), s.3138-
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma14113138
Weryfikacja:
Politechnika Gdańska

wyświetlono 164 razy

Publikacje, które mogą cię zainteresować

Liquefaction of alder wood as the source of renewable and sustainable polyols for preparation of polyurethane resins

2020

Biopolyols obtained via microwave-assisted liquefaction of lignin: structure, rheological, physical and thermal properties

2018

Chemical structures, rheological and physical properties of biopolyols prepared via solvothermal liquefaction of Enteromorpha and Zostera marina biomass

2019

Bio-Based Polyurethane Composites and Hybrid Composites Containing a New Type of Bio-Polyol and Addition of Natural and Synthetic Fibers

2020
Meta Tagi