Manganese–Cobalt Based Spinel Coatings Processed by Electrophoretic Deposition Method: The Influence of Sintering on Degradation Issues of Solid Oxide Cell Oxygen Electrodes at 750 °C - Publikacja - MOST Wiedzy

Twoje konto

zaloguj

Wyszukiwarka

Manganese–Cobalt Based Spinel Coatings Processed by Electrophoretic Deposition Method: The Influence of Sintering on Degradation Issues of Solid Oxide Cell Oxygen Electrodes at 750 °C

Abstrakt

This paper seeks to examine how the Mn–Co spinel interconnect coating microstructure can influence Cr contamination in an oxygen electrode of intermediate temperature solid oxide cells, at an operating temperature of 750 °C. A Mn–Co spinel coating is processed on Crofer 22 APU substrates by electrophoretic deposition, and subsequently sintered, following both the one-step and two-step sintering, in order to obtain significantly different densification levels. The electrochemical characterization is performed on anode-supported cells with an LSCF cathode. The cells were aged prior to the electrochemical characterization in contact with the spinel-coated Crofer 22 APU at 750 °C for 250 h. Current–voltage and impedance spectra of the cells were measured after the exposure with the interconnect. Post-mortem analysis of the interconnect and the cell was carried out, in order to assess the Cr retention capability of coatings with different microstructures.

Cytowania

  • 1 4

    CrossRef

  • 0

    Web of Science

  • 1 5

    Scopus

Autorzy (7)

Cytuj jako

Pełna treść

pobierz publikację
pobrano 32 razy
Wersja publikacji
Accepted albo Published Version
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma14143836
Licencja
Creative Commons: CC-BY otwiera się w nowej karcie

Słowa kluczowe

Informacje szczegółowe

Kategoria:
Publikacja w czasopiśmie
Typ:
artykuły w czasopismach
Opublikowano w:
Materials nr 14,
ISSN: 1996-1944
Język:
angielski
Rok wydania:
2021
Opis bibliograficzny:
Zanchi E., Ignaczak J., Kamecki B., Jasiński P., Molin S., Boccaccini A., Smeacetto F.: Manganese–Cobalt Based Spinel Coatings Processed by Electrophoretic Deposition Method: The Influence of Sintering on Degradation Issues of Solid Oxide Cell Oxygen Electrodes at 750 °C// Materials -,iss. 14 (2021),
DOI:
Cyfrowy identyfikator dokumentu elektronicznego (otwiera się w nowej karcie) 10.3390/ma14143836
Źródła finansowania:
Weryfikacja:
Politechnika Gdańska

wyświetlono 120 razy

Publikacje, które mogą cię zainteresować

Effect of interconnect coating procedure on solid oxide fuel cell performance

2020

Assesment of (Mn,Co)3O4powders for possible coating material for SOFC/SOEC interconnects

2015

Iron doped manganese cobaltite spinel coatings produced by electrophoretic co-deposition on interconnects for solid oxide cells: Microstructural and electrical characterization

  • E. Zanchi,
  • S. Molin,
  • A. Sabato
  • + 4 autorów
2020

Mn-Co spinel coatings on Crofer 22 APU by electrophoretic deposition: Up scaling, performance in SOFC stack at 850 °C and compositional modifications

  • A. Sabato,
  • E. Zanchi,
  • S. Molin
  • + 6 autorów
2021
Meta Tagi