dr inż. Jakub Kowalski
Employment
- Assistant professor at Institute of Ocean Engineering and Ship Technology
Research fields
Publications
Filters
total: 37
Catalog Publications
Year 2023
-
Multi-functional monodispersed SiO2-TiO2 core-shell nanostructure and TEOS in the consolidation of archaeological lime mortars surfaces
PublicationArchaeological traditional lime mortars are susceptible to many environmental conditions such as the impact of water (rain, humidity, groundwater, etc.), variation of temperatures' degrees, wind and/or pollution. Accordingly, this research aims to provide newly assessed multifunctional Nano-coating for the purpose of archaeological lime mortar protection. For this, the study combined physicochemical and mechanical characterizations...
-
Experimental ultimate strength assessment of stiffened plates subjected to marine immersed corrosion
PublicationThis study experimentally analyses the impact of marine immersed corrosion degradation on the compressive strength of the stiffened plates where the lower degradation levels were considered. The corrosion degradation test was accelerated by controlling the natural corrosion environmental factors, avoiding applying an electric current. Different groups of corrosion degradation levels and initial plate thicknesses were investigated....
Year 2022
-
Influence of Material Thickness on the Ductile Fracture of Steel Plates for Shipbuilding
PublicationIn the shipbuilding industry, the risk of brittle fractures is relatively high because some units operate in arctic or subarcticzones and use high thickness (up to 100 mm) steel plates in their structures. This risk is limited by employing certifiedmaterials with a specific impact strength, determined using the Charpy method (for a given design temperature) and byexercising control over the welding processes (technology qualification,...
-
Crack Mouth Opening Displacement for EH36 Shipbuilding Steel Measurements Dataset
PublicationThe dataset titled EH36 steel for shipbuilding (plate thickness 50 mm) – CMOD – force record, a0/W=0.6 contains a CMOD (Crack Mouth Opening Displacement) – Force record which is the base for evaluation of the fracture toughness of structural steel. Bend specimens with a Bx2B section (B = 50 mm), and relative initial crack length a0/W=0.60 were used. The test was carried out at ambient temperature in accordance with the ISO 12135...
-
Crack Mouth Opening Displacement for EH36 Shipbuilding Steel Measurements
PublicationThe dataset titled EH36 steel for shipbuilding (plate thicnkness 50mm) - CMOD - force record, a0/W = 0.6 contains CMOD (Crack Mouth Opening Displacement) - Force record which is the base for evaluation of fracture toughness of structural steel. Bend specimens witch Bx2B section (B= 50mm), and relative initial crack length a0 / W = 0.60 were used. The test was carried out at ambient temperature in accordance to ISO 12135 standard....
Year 2021
-
Numerical and experimental study on effect of boundary conditions during testing of stiffened plates subjected to compressive loads
PublicationThis study analyses the effect of boundary conditions during testing on the structural behaviour stiffened plates with different thicknesses subjected to compressive loads. The goal of the compressive tests is to analyse the ultimate strength of a stiffened plate. During the test, relevant physical quantities are measured and investigated. The supporting structure's behaviour is investigated by analysing the force-displacements...
-
Indoor accelerated controlled corrosion degradation test of small- and large-scale specimens
PublicationThe work presented here is a part of a long-term project analysing the structural behaviour of ageing marine structures. An accelerated corrosion degradation set-up was developed to reproduce corroded marine structural specimens of different degrees of degradation, controlling various natural factors, i.e., temperature, oxygen content, salinity, and flow velocity. The nine stiffened plates of 1.2 m length and 30 small scale specimens...
-
EXPERIMENTAL AND NUMERICAL INVESTIGATION ON SPECIMEN GEOMETRY EFFECT ON THE CTOD VALUE FOR VL-E36 SHIPBUILDING STEEL
PublicationThere are special cases in the marine industry, where additional material tests, such as the fracture toughness test, must be performed. Additional fracture toughness tests, such as CTOD (Crack Tip Opening Displacement), are typically performed on three-point bend specimens. The dimension that defines all the specimen dimensions is the thickness of the material to be tested. It is recommended by classification societies (e.g. DNVGL)...
Year 2020
-
Influence of process of straightening ship hull structure made of 316L stainless steel on corrosion resistance and mechanical properties
PublicationThe AISI 316L type steel belongs to the group of chromium-nickel stainless steels. They are determined according to European standards as X2CrNiMo17-12-2 and belong to the group of austenitic stainless steels. Steels of this group are used for elements working in seawater environments, for installations in the chemical, paper, and food, industries, for architectural elements, and many others. The chemical composition of corrosion-resistant...
-
Experimental and numerical investigations of ultimate strength of imperfect stiffened plates of different slenderness
PublicationThe objective of this study is to analyse the behaviour of compressed stiffened plates of different slenderness using experimental and numerical methods. The presented results are part of a long-term project to investigate the ultimate strength of geometrically imperfect structures subjected to different degradation phenomena, including corrosion degradation and locked cracks. Several specimens were subjected to a uniaxial compressive...
Year 2019
-
Wpływ błędów technologicznych na degradację korozyjną stopu miedzi z grupy cunifer – CuNi10Fe1,6Mn
PublicationStopy miedzi z niklem, zwane cuniferami (Cu, Ni, Fe oraz R – reszta pierwiastków stopowych), są szeroko stosowane do produkcji elementów rurociągów okrętowych mających kontakt z wodą zaburtową, takich jak instalacja chłodzenia silnika głównego. Stopy te charakteryzują się bardzo wysoką odpornością korozyjną dzięki odpowiednio wykonanej pasywacji. Jednakże gdy pasywację przeprowadzi się nieprawidłowo, materiał traci właściwości...
Year 2018
-
Wytrzymałość drobnych elementów olinowania ruchomego wykonanych z Dyneemy
PublicationRozwój materiałów w oceanotechnice otwiera nowe możliwości w budowie jachtów. Artykuł porusza kwestie wplatania nowoczesnych lin typu HMPE (ang. high-modulus polyethylene) w konstrukcje takielunku jachtu, a dokładniej w część olinowania ruchomego. Dzięki specjalnej konstrukcji liny bez oplotu zbudowanej z 12 splotek utworzonej przez ich przeplatanie, możliwe jest konstruowanie drobnych elementów nośnych, takich jak miękkie...
-
Wpływ parametrów geometrycznych próbki stalowej na uzyskaną wartość wskaźnika krytycznego rozwarcia wierzchołka szczeliny CTOD w badaniach odporności na pękanie
PublicationW pracy podjęto problem określania ciągliwości materiału metodami mechaniki pękania, jako jednego z częściej wymaganych kryteriów dla konstrukcji okrętowych i oceanotechnicznych. Na podstawie rozważań i modeli numerycznych, studiowano problem wpływu parametrów geometrycznych próbki na wynik znormalizowanej próby określania krytycznego rozwarcia wierzchołka szczeliny - CTOD. W pierwszej części pracy dokonano przeglądu metod...
-
THE EFFECT OF NOTCH DEPTH ON CTOD VALUES IN FRACTURE TESTS OF STRUCTURAL STEEL ELEMENTS
PublicationIn elements of steel structures working at low temperatures, there is a risk of appearance of brittle fracture. This risk is reduced through the use of certified materials having guaranteed strength at a given temperature. A method which is most frequently used to determine brittle fracture toughness is the Charpy impact test, preformed for a given temperature. For offshore structures intended to work in the arctic climat e, the...
-
NUMERICAL MODEL OF PLASTIC DESTRUCTION OF THICK STEEL STRUCTURAL ELEMENTS
PublicationIn the shipbuilding industry, the risk of brittle fracture of the structure is limited by using certified materials with specified impact strength, determined by the Charpy method (for a given design temperature) and by supervising the welding processes (technology qualification, production supervision, non-destructive testing). For off-shore constructions, classical shipbuilding requirements may not be sufficient. Therefore, the...
Year 2017
-
Wytrzymałość pętli wplatanych na linach podwójnie plecionych
PublicationCechą wyróżniającą statki żaglowe z grona innych obiektów pływających są żagle. To cecha widoczna, za którą kryją się mniej romantyczne elementy, takie jak maszty, liny i osprzęt. Rozpostarcie białych płócien na maszcie i następnie żeglowanie wymaga sprawnego operowania nimi, co wiąże się z doborem odpowiedniego ich zestawu, ułożenia i napięcia. To maszty są kręgosłupem takielunku, a liny jego mięśniami i ścięgnami. Do poprawnego...
-
Propozycja modernizacji układu napędowego pasażerskiego statku śródlądowego z konwencjonalnego na hybrydowy
PublicationNa przestrzeni ostatnich lat zaobserwowano znaczny wzrost zainteresowania ekologicznymi układami napędowymi rekreacyjnych oraz użytkowych jednostek pływających, wpisującymi się w nurt przyjaznej środowisku, bez emisyjnej, zielonej żeglugi. Problemem jest jednak skonstruowanie bezpiecznej dla pasażerów jednostki pływającej, o możliwie niskim zapotrzebowaniu na energię, wyposażonym w wysoko sprawny, bez emisyjny układ napędowy....
-
ENERGY EFFICIENT AND ENVIRONMENTALLY FRIENDLY HYBRID CONVERSION OF INLAND PASSENGER VESSEL
PublicationThe development and growing availability of modern technologies, along with more and more severe environment protection standards which frequently take a form of legal regulations, are the reason why attempts are made to find a quiet and economical propulsion system not only for newly built watercraft units, but also for modernised ones. Correct selection of the propulsion and supply system for a given vessel affects significantly...
-
Ekspertyza nr: 42/017/II/2017 - na temat zmian własności materiałowych na skutek pożaru
PublicationEkspertyzie podlegały elementy nośne konstrukcji spalonej częściowo hali, pochodzące z trzech rejonów: rejonu bezpośrednio objętego pożarem, rejonu na który miała wpływ wysoka, nieokreślona temperatura i rejonu w którym nie było wpływu pożaru (próbki odniesienia). Określono własności materiałowe i możliwości dalszej eksploatacji konstrukcji z rejonu drugiego
Year 2016
-
Ekspertyza numer 75/01/II/2016 - Określenie stanu powierzchni wewnętrznej, rury wykonanej ze stopu CuNi10Fe1,6Mn ze względu na możliwość wystąpienia produktów korozji. Określenie statusu warstwy pasywnej
PublicationElementy systemów rurociągów okrętowych mających kontakt z wodą zaburtową, takich jak np. instalacja chłodzenia silnika głównego, czy instalacja przeciw pożarowa, wykonywane są często ze stopów miedzi z nikem zwanych Cuniferami (Cu Ni Fe R-reszta pierwiastków stopowych). Cunifery charakteryzują się bardzo wysoką odpornością na korozję, pod warunkiem że procesy spawania i późniejszej pasywacji rurociągu przebiega zgodnie z właściwymi...
seen 3213 times