dr inż. Łukasz Pyrzowski
Zatrudnienie
- Adiunkt w Katedra Wytrzymałości Materiałów
Publikacje
Filtry
wszystkich: 125
Katalog Publikacji
Rok 2024
-
Damage of a post-tensioned concrete bridge – Unwanted cracks of the girders
PublikacjaThe cracking of a post-tensioned T-beam superstructure, which was built using the incremental launching method, is analyzed in the paper. The problem is studied in detail, as specific damage was observed in the form of longitudinal cracks, especially in the mid-height zone of the girder at the interface of two assembly sections. The paper is a case study. A detailed inspection is done and non-destructive testing results of the...
-
Computational modelling of historic masonry railroad arch bridges
PublikacjaThe problems encountered during the analyzes of structural response of historic masonry railroad arch bridges are described in this paper. The attention is mainly focused on the stiffness of the masonry arches, their strengths and appropriate estimation of railroad load intensity. Issues related to computational modelling of two, existing, almost 130 years old masonry arch railroad bridges are presented in this context. The main...
Rok 2023
-
Przegląd aplikacji zużytych łopat turbin wiatrowych na potrzeby budownictwa infrastrukturalnego
PublikacjaArtykuł zawiera przedstawienie aktualnego stanu wiedzy na temat recyklingu i ponownego użycia łopat wirników turbin wiatrowych na potrzeby budownictwa infrastrukturalnego. Poruszana problematyka stała się w ostatnim czasie bardzo istotna, a prognozy i statystyki pokazują, że najbliższe lata, będące jednocześnie okresem intensywnego rozwoju energetyki wiatrowej, będą jeszcze bardziej niż kiedykolwiek wymagały opracowania metody...
-
Odpowiedź na Kilka uwag do artykułu nt. Mostu Uniwersyteckiego w Bydgoszczy
PublikacjaW materiale zawarto odpowiedź do artykułu "Kilka uwag do artykułu nt. Mostu Uniwersyteckiego w Bydgoszczy" opublikowanego w ne 1/2023 czasopisma "Mosty" na str. 8.
-
Influence of Actual Curing Conditions on Mechanical Properties of Concrete in Bridge Superstructures
PublikacjaThis article presents the research on the mechanical characteristics of concrete in the construction of three concrete bridges. A system of recording the internal temperature of concrete and automatic control of laboratory ovens was used for specimen curing. This allowed the specimens to be cured under conditions similar to those occurring in the structure. Before the construction, reference blocks were used to define similar curing...
-
Failure characterisation of sandwich beams using integrated acoustic emission and digital image correlation techniques
PublikacjaThe paper presents the experimental study of the failure behaviour of sandwich beams subjected to bending. The samples examined are sandwich beams made of polyethylene terephthalate foam core and glass fibre-reinforced polymer laminate face sheets. In a series of experiments, it has been proposed to integrate diagnostic techniques with acoustic emission and digital image correlation to accurately track the cracking process on the...
-
Badania nieniszczące mostu jako podstawa do oceny jego stanu na potrzeby realizacji przejazdu ponadnormatywnego
PublikacjaZagadnieniami związanymi z analizą możliwości realizacji przejazdów ponadnormatywnych przez obiekty mostowe zajmują się zespoły inżynierskie i naukowe na całym świecie. Wiele z analiz udaje się wykonać przy użyciu standardowych i typowych metod. Jest jednak grupa obiektów, dla których wymagane jest podejście indywidualne. Dla nich dopiero zaprojektowanie i zrealizowanie indywidualnie dobranego planu badawczego jest jedyną możliwością...
Rok 2022
-
Zaawansowane studium stref zakotwienia systemu podwieszenia Mostu Uniwersyteckiego w Bydgoszczy, cz.I
PublikacjaOpisany w artykule problem dotyczy skutków nadmiernych deformacji stref zakotwienia odciągów linowych, które stwierdzono w pomoście mostu Uniwersyteckiego w Bydgoszczy. Mimo, że most był w eksploatacji przez siedem lat, deformacje zostały zakwalifikowane jako niebezpieczny objaw niedostatecznej nośności tego elementu konstrukcji. Tym samym most został zamknięty dla ruchu. Celem artykułu jest przedstawienie zaawansowanego podejścia...
Rok 2020
-
Short and Long Term Measurements in Assessment of FRP Composite Footbridge Behavior
PublikacjaThe paper presents application of different sensors for the purpose of short and long term measurements, as well as a structural health monitoring (SHM) system to assess the behavior of a novel fiber reinforced plastics (FRP) composite footbridge. The aim is to present a thorough and concise description of these sensors networks and results gathered with their aid during in situ measurement of strains, displacements, and vibrations,...
-
Measurements of displacement and acceleration of the railway bridge at km 333-254 of the Vilnius - Klaipeda railway line
PublikacjaThe purpose of this work is to perform a report of static and dynamic test realized on the bridge at km 333-254 of the Vilnius - Klaipeda railway line over the Salantas River in Kūlupėnų.
-
Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test
PublikacjaIn the paper behaviour of laminated sandwich beams (FRP face sheet – PET foam core – FRP face sheet) subjected to three point bending is studied. The paper aim is to find practical descriptions enabling effective and accurate estimation of the elastic response, damage and failure of the beams, basing on experiments and static calculations. Therefore a number of tests are described, that were done on laminated coupons and foam specimens...
-
Dynamic Tests and Technical Monitoring of a Novel Sandwich Footbridge
PublikacjaA novel sandwich composite footbridge is described in this paper, for the first time after it has been put into operation over the Radunia River in the Pruszcz Gdański municipality. This paper presents results of dynamic tests and describes technical monitoring of the footbridge. The dynamic tests were conducted to estimate pedestrian comfort and were compared with the ones from numerical simulations made in the environment of...
-
Dynamic Response of the Suspended on a Single Cable Footbridge
PublikacjaThe article presents numerical simulations, dynamic in situ load tests and a structural health monitoring (SHM) system installed in a suspended on a single cable footbridge. Numerical simulations performed prior to construction indicated the possibility of structural dynamics problems, finally confirmed in the course of dynamic test loading. In the dynamic load course the bridge deck developed vibrations displaying accelerations...
Rok 2019
-
Wykonanie ekspertyzy technicznej Stadionu Miejskiego w Białymstoku. Część I. Praca konstrukcji żelbetowej obiektu pod kątem poprawności działania dylatacji na skutek oddziaływań termicznych
PublikacjaCelem opracowania jest analiza przyczyn uszkodzeń, w szczególności spękania masy wypełniającej szczeliny dylatacyjne, które wystąpiły na obiekcie Stadionu Miejskiego w Białymstoku, wykonanej w ramach inwestycji realizowanej przez OHL: ,,Budowa Stadionu Piłkarskiego w regionie północno – wschodniej Polski wraz z zapleczem treningowym”. Zakres opracowania obejmuje: 1) analizę dokumentacji archiwalnej udostępnionej przez Zamawiającego, 2)...
-
Numerical modeling and experimental validation of full-scale segment to support design of novel GFRP footbridge
PublikacjaThe paper contains analysis of full-scaled three meters long segment of a novel composite footbridge. Both numerical modeling and experimental validation were performed. Analyzed object is a shell type sandwich channel-like structure made of composite sandwich with GFRP laminates as a skin and PET foam as a core. Several static load schemes were performed including vertical and horizontal forces. In FEM analysis multilayered laminate...
-
Dynamic tests of composite footbridge segment – experimental and numerical studies
PublikacjaExperimental dynamic tests and numerical simulations of a 3 meters long segment of a footbridge made of polymer composites are presented in the paper. The span-length is reduced, however dimensions of cross-section are the same as the target footbridge. The segment structure is made of sandwich panels, which consist of fibre reinforced polymer (GFRP) laminates (skins) and a PET foam (core). The first part of the paper contains...
Rok 2018
-
Wykonanie weryfikacji nośności mostów kolejowych na bocznicy GL w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś
PublikacjaCelem opracowania jest wykonanie weryfikacji nośności mostu kolejowego na bocznicy GL nad kanałem w rejonie ul. Zawodzie w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś. Zakres opracowania obejmuje: • inwentaryzację konstrukcji, • ocenę stanu technicznego konstrukcji, • wykonanie symulacji obliczeniowych zachowania konstrukcji na skutek oddziaływań reprezentatywnych schematów obciążeń, • podsumowanie i wnioski.
-
Wykonanie weryfikacji nośności mostów kolejowych na bocznicy GL w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś
PublikacjaCelem opracowania jest wykonanie weryfikacji nośności mostu kolejowego na bocznicy GL nad rz. Rozwójka w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś. Zakres opracowania obejmuje: • inwentaryzację konstrukcji, • ocenę stanu technicznego konstrukcji, • wykonanie symulacji obliczeniowych zachowania konstrukcji na skutek oddziaływań reprezentatywnych schematów obciążeń, • podsumowanie i wnioski.
-
The validation process of truss model with joint eccentricities
PublikacjaNowadays, due to the technological reasons in modern lightweight steel trusses, fabricated from cold-formed sections, positive eccentricities appear in the truss nodes, to induce additional forces truss chords. In order to account for the real load-carrying capacity of truss node area the steel structure research was conducted in scale 1:1. As a result of experimental research, the forms of deformation and strains of the walls...
-
TESTING CONTRACTION AND THERMAL EXPANSION COEFFICIENT OF CONSTRUCTION AND MOULDING POLYMER COMPOSITES
PublikacjaThe paper presents results of systematic tests of contraction and thermal expansion coefficients of materials based on polymer composites. The information on the above material properties is essential both at the design stage and during the use of finished products. Components for the samples were selected in such a way as to represent typical materials used for production of construction and moulding elements. The performed tests...
wyświetlono 1772 razy