Search
displaying 1000 best results Help
Search results for: POLYMER PACKAGING MATERIALS
-
Materials Today Advances
Journals -
ARCHIVES OF METALLURGY AND MATERIALS
Journals -
SMART MATERIALS & STRUCTURES
Journals -
Science of Advanced Materials
Journals -
Analytical investigation of phase assemblages of alkali-activated materials in CaO-SiO2-Al2O3 systems: The management of reaction products and designing of precursors
Publication -
Selective Laser Sintering And Melting Of Pristine Titanium And Titanium Ti6Al4V Alloy Powders And Selection Of Chemical Environment For Etching Of Such Materials
Publication -
Ti-doped Sr2Fe1.4-xTixMo0.6O6-δ double perovskites with improved stability as anode materials for Solid Oxide Fuel Cells
Publication -
Deep insight into the pore size distribution of N-doped porous carbon materials on electrochemical energy storage and CO2 sorption
Publication -
Tuning Cu-Content La1−xSrxNi1−yCuyO3−δ with Strontium Doping as Cobalt-Free Cathode Materials for High-Performance Anode-Supported IT-SOFCs
Publication -
XPS measurement of the Fe-Ti based materials
Open Research DataThe mono‐ and bimetal‐modified (Pd, Cu) titanium(IV) oxide and iron oxide (III) photocatalysts were prepared by chemical reduction method and characterized using XPS method. The composition of elements incorporated in the surface layer of mono- and bimetallic photocatalysts was determined by XPS analysis, as well as the valence state of elements. Measurements...
-
Standard gas mixtures – indispensable reference materials in the analysis of gaseous media
Publication -
Porous Selective Laser Melted Ti and Ti6Al4V Materials for Medical Applications
Publication -
Structural, thermal and photocatalytic properties of composite materials SiO2/TiO2/C
Publication -
U-Tube Method of Identification of Drag Parameters for High Permeability Materials
Publication -
Deep Indentation Tests of Soft Materials Using Mobile and Stationary Devices
Publication -
Wear measurements of self-lubricating bearing materials in small oscillatory movement
Publication -
Production of gaseous matrix-free reference materials. Application of thermoanalytical techniques
PublicationMateriały odniesienia są wykorzystywane w każdym laboratorium w celu zapewnienia jakości wyników pomiarów analitycznych. Produkcja materiałów odniesienia nie jest zadaniem łatwym, szczególnie w przypadku składników gazowych, toksycznych i o nieprzyjemnym zapachu. Termiczny rozkład związków powierzchniowych jest bardzo dogodnym sposobem sporządzania właśnie tego rodzaju mieszanin. Ważną rolę w procesie termicznego rozkładu związków...
-
Functionalized azobenzocrown ethers as sensor materials—The synthesis and ion binding properties
PublicationNew 13- and 16-membered azobenzocrown ethers with aromatic amino, amide, ether–ester or ether–amide residue in para position to an azo moiety were obtained. Acid–base properties and ion binding ability of the colored compounds were studied by spectroscopic methods: UV–vis, fluorimetry and 1H NMR spectroscopy. Selected azobenzocrowns were tested as ionophores in ion-selective membrane electrodes (ISEs) – classic and miniature all...
-
Emulsifi ers from renewable materials: an eco-friendly synthesis and properties
PublicationThe focus of this study was the preparation of novel bio based polyglycerol emulsifiers characterized by a one pot synthesis, thus by modified properties with respect to interfacial activity and effectiveness as emulsion stabilizers. The final products of the esterification process, carried out in the presence of carboxylates were used directly as emulsifiers (without purification or fractionation). Polyglycerol emulsifiers obtained...
-
Wear measurements of self lubricating bearing materials in small oscillatory movement
PublicationRosnące wymagania ekologiczne powodują wzrost tendencji wymiany klasycznych materiałów łożyskowych, wymagających dodatkowego czynnika smarnego, na materiały nie wymagające smarowania. Zamianie takiej może towarzyszyć obniżenie trwałości zmodernizowanego łożyska. Ten niekorzystny efekt nierzadko obserwuje się w węzłach łożyskowych kierownic turbin wodnych. Autorzy podjęli próbę wyjaśnienia zjawisk występujących w tego typu łożyskach....
-
Design and Utility of Specialist Comminution Set-Up for Plastics and Organic Materials
Publication -
Coefficients for Assessing the Visibility of Materials Used in Anti-Smog Face Masks
Publication -
Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles
Publication -
Oxyfluoride transparent glass-ceramics: a promising family of materials for photonic applications
Publication -
The Impact of the Quality of Tap Water and the Properties of Installation Materials on the Formation of Biofilms
Publication -
Absorbable sutures in general surgery – review, available materials, and optimum choices
Publication -
New Thiophene Imines Acting as Hole Transporting Materials in Photovoltaic Devices
Publication -
Analysis of different approaches of capillary rise method for characterization of porous materials
PublicationPomiar kąta zwilżania materiałów porowatych metodą wzniesienia kapilarnego został opisany przez wielu badaczy, jakkolwiek problem ten jest wciąż dyskutowany. Niniejsza praca dotyczy oceny wzniesienia kapilarnego za pomocą równania Washburn'a. Wykonano badania oparte na pomiarze masy i wysokości lustra cieczy zwilżającej w funkcji czasu wzniesienia w złożu wykonanym z kulek szklanych. Uzyskane wyniki były analizowane z użyciem równania...
-
Explicit accumulation model for granular materials under multiaxial cyclic loading.
PublicationPróba korelacji parametrów modelu akumulacyjnego piasku z wynikami badań dynamicznych piasku.
-
Estimation of optical parameters of highly scattering materials by time-of-flight spectroscopy.
PublicationPrzedstawiono metody wyznaczania podstawowych parametrów materiałów silnie rozpraszających światło na podstawie pomierzonego rozkładu czasu przelotu krótkich impulsów laserowych. W algorytmie wykorzystano metodę Monte Carlo i metodę dyfuzji do opisu propagacji światła. Oszacowano dokładność oszacowywania tych parametrów.
-
Recent developments in the synthesis and applications of graphene-family materials functionalized with cyclodextrins
Publication -
Theoretical analysis of current induced by high-energetic radiation in dielectric materials
PublicationW pracy poddano analizie mechanizmy generacji i rekombinacji nośników ładunku w obecności wysokoenergetycznego promieniowania. Przedstawiono zależności gęstości prądu elektrycznego od natężenia promieniowania i napięcia polaryzujacego próbkę.
-
MODAL ANALYSIS OF REAL TIMBER FRAME HOUSES WITH DIFFERENT INSULATION MATERIALS
PublicationThe aim of this article is to present the results of a numerical modal analysis of two actual structures of timber frame buildings and the different behaviour due to the used insulation material. One model of the timber structure was filled with mineral wool, while the other with polyurethane foam. During the modal analysis, eigenvalues for both models have been determined. The results of the analysis clearly show the increase...
-
Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?
Publication -
Novel approach to interference analysis of glucose sensing materials coated with Nafion
PublicationA gold-based sensing platform, TiND | AuNP | Nafion, was prepared as an exemplary electrode material exhibiting a response to glucose in a neutral solution. The change of electrochemical properties after exposure to glucose and interference compounds such as vitamin C, glycine, urea, paracetamol and acetylsalicylic acid was tested.
-
On Deck Oil Spill Clean-Up Materials – Solution for Engine Rooms
Publication -
Modeling of textural anisotropy in granular materials with stochastic micro-polar hypoplasticity.
PublicationW artykule przedstawiono wyniki numerycznej wpływu anizotropii strukturalnej w materiałach granulowanych na powstawanie lokalizacji odkształceń. Obliczenia wykonano dla ściskania w płaskim stanie odkształcenia stosując metodę elementów skończonych na bazie mikropolarnego prawa hipoplastycznego. Wpływ anizotropii modelowano stosując skorelowane pola początkowego wskaźnika porowatości.
-
Early prediction of macrocrack location in concrete and other granular composite materials
PublicationHeterogeniczne kruche kompozyty, takie jak beton, ceramika i skały składają się z ziaren połączonych wiązaniami. Pytanie, czy ścieżka pęknięcia, która prowadzi do zniszczenia może być przewidziania na podstawie znanych cech mikrostrukturalnych, a mianowicie łączności wiązań, rozmiaru, energii pękania, wytrzymałości pozostają otwarte. Istnieje wiele kryteriów pęknięć. Najczęściej używane są oparte na postulowanym ekstremum naprężenia...
-
Modelling of localization of deformation in quasi-brittle materials with a continuum and discrete model
PublicationW artykule przedstawiono wyniki obliczeń lokalizacji odkształceń w materiałach kruchych przy zastosowaniu 2 modeli w ramach mechaniki ośrodka ciągłego i jednego modelu w ramach ośrodka dyskretnego. W przypadku pierwszy zastosowano model sprężysto-plastyczny i model zniszczeniowy rozszerzony o długość charakterystyczną mikrostruktury. W przypadku drugim przyjęto model rusztowy złożony z beleczek.
-
Load capacity and serviceability conditions for footbridges made of fibre-reinforced polymer laminates = Warunki nośności i użytkowalności w odniesieniu do kładek z laminatów polimerowych
PublicationThe contribution is focused on derivation of the Ultimate Limit State (ULS) and Serviceability Limit State (SLS) design criteria for footbridges built of fibre-reinforced polymer matrix (FRP) laminates. The ULS design criterion is based on the design guidelines for above-ground, pressure, FRP composite tanks and the Tsai-Wu failure criterion, which is used to predict the onset of FRP laminates damage. The SLS criterion is based...
-
Emission and properties of airborne wear particles from train brake friction materials based on novolac phenolic resins and butadiene rubbers
PublicationThe emission of airborne particulate matter from a train brake depends on the formulation of its friction material. This study investigates the emission and properties of wear particles from train brake friction materials based on straight or resorcinol-modified novolac phenolic resin and nitrile or styrene butadiene rubber used as binding ingredients. The wear particles are generated by a pin-on-disc tribomachine inside an aerodynamic...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 900 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 1000 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
The XRD diffraction patterns of (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials after reduction at 1100 deg.C in hydrogen
Open Research DataThe (La0.3Sr0.6Ce0.1)0.9Me0.1Ti0.9O3-δ (Me= Co, Cu, Fe, Mn, Ni) materials were synthesized via the solid state reaction method and examined as a potential anode material. First, the mixed oxide reagents were pressed into pellets and calcined at 1200 °C for 12 hours to decompose most of the organic compounds. The resulting calcined pellet was ground...
-
Spectroscopy properties of 1,8-diazafluoren-9-one (DFO) in PVA polymer for different concentrations
Open Research DataSpectroscopy properties: absorption and fluorescence spectra of 1,8-diazafluoren-9-one (DFO) in PVA film for different concentrations of dye.
-
Understanding the capacitance of thin composite films based on conducting polymer and carbon nanostructures in aqueous electrolytes
PublicationIn this work electrochemical performance of thin composite films consisted of poly(3,4-ethylenedioxythiophene) (PEDOT), graphene oxide (GOx) and oxidized multiwalled carbon nanotubes (oxMWCNTs) is investigated in various sulphates (Li2SO4, Na2SO4, K2SO4, MgSO4) and acidic (H2SO4) electrolytes. Capacitance values, rate capability and cycling stability achieved for the composite layers are correlated with the electrolytes’ properties...
-
Polymer-free cubosomes for simultaneous bioimaging and photodynamic action of photosensitizers in melanoma skin cancer cells
Publication -
<title>Novel matrix for fiber optic chemical sensors made of particle track polymer</title>
Publication -
Selectivity of Pb(II) transport across polymer inclusion membranes doped with imidazole azothiacrown ethers
PublicationMembrany wykonane z trioctanu celulozy zawierające jako jonofor 18 i 21-członowe azotiakorony z resztą imidazolu w makropierścieniu przebadano pod kątem transportu jonów Zn(II), Cd(II) i Pb(II) z wodnego roztworu soli (pH ~5.5, cMe = 0,001 M). W wyniku badań ustalono, że jon Pb(II) może być efektywnie wydzielony z roztworu mieszaniny jonów Pb(II), Zn(II), Co(II), Ni(II), Cu(II) i Cd(II).Sekwencja selektywności transportu dla 18-członowej...
-
Unwinding Au+···Au+ Bonded Filaments in Ligand-Supported Gold(I) Polymer under Pressure
Publication