Search
displaying 1000 best results Help
Search results for: MIL-53(Al)
-
Evaluation of Partial Nitritation/Anammox (PN/A) Process Performance and Microorganisms Community Composition under Different C/N Ratio
PublicationA one-stage partial nitritation/anammox (PN/A) process with intermittent aeration is possible under sidestream conditions, but implementation in a mainstream is a challenge due to increased Carbon/Nitrogen (C/N) ratios in domestic wastewater. This study investigated the effect of C/N ratios on process efficiency and the effect of narrowing non-aeration time on process improvement at high chemical oxygen demand (COD) load. An increase...
-
Comparison of the Efficiency of Deammonification under Different DO Concentrations in a Laboratory-Scale Sequencing Batch Reactor
PublicationThe efficiency of deammonification depends on the cooperation of ammonium oxidizing bacteria and archaea (AOB/AOA), anaerobic ammonium oxidizing bacteria (AnAOB) and the effective suppression of nitrite oxidizing bacteria (NOB) that compete with AnAOB for nitrite (NO2 -N). One of the effective NOB suppression strategies is intermittent aeration. However, it is important to have a good understanding of the optimum dissolved oxygen...
-
Ball on disk test AL(rf.)-Al2O3-r25
Open Research DataHard particle reinforced Al6061 alloy testing. Laser remelting and kinetic injection of particulate material. Ball on disc tribological test. Ball material: Al2O3. Ball diameter: 5 mm. Sliding path radius: 25 mm. Disk material: Al6061 not treated (reference).
-
Ball on disk test AL(rf.)-Al2O3-r15
Open Research DataHard particle reinforced Al6061 alloy testing. Laser remelting and kinetic injection of particulate material. Ball on disc tribological test. Ball material: Al2O3. Ball diameter: 5 mm. Sliding path radius: 15 mm. Disk material: Al6061 not treated (reference).
-
New σ-phases in the Nb–X–Ga and Nb–X–Al systems (X = Ru, Rh, Pd, Ir, Pt, and Au)
PublicationPreviously unreported σ-phases in the ternary niobium-based systems Nb–X–Ga for X = Ru, Rh, Pd, Ir, Pt, Au, and Nb–X–Al for X = Ir, and Pt are presented, prepared by arc-melting followed by annealing at 1000 °C for 1 week. The phases are primitive tetragonal (P42/mnm, no. 136) with lattice parameters of a = 9.8336(2)–9.9432(1) Å and c = 5.1098(1)–5.1718(1) Å. Refinements of the single crystal X-ray diffraction data for the Ru and...
-
Evolution of Physical Properties of RE 3 Ni 5 Al 19 Family (RE = Y, Nd, Sm, Gd, Tb, Dy, Ho, and Er)
PublicationSingle crystals of RE3Ni5Al19 series (RE = Y, Nd, Sm, Gd, Tb, Dy, Ho, and Er) are grown using the Al self-flux method. The crystal structure is examined by both single crystal and powder X-ray diffraction. Physical properties are studied for the first time for RE3Ni5Al19 (RE = Y, Nd, Gd, Tb, Dy, Ho, and Er) by means of magnetic susceptibility, electrical resistivity, and heat capacity measurements. Complex magnetic behaviors, with...
-
Dr. Asmaa Mahfoud Al-Hakimi PhD
PeopleDr. ASMA’A MAHFOUD HEZAM AL-HAKIMY from Yemen was born in Egypt 9th October. Received Diploma in Computer Programming in 2006 from University of Science and Technology Sanaa Yemen. Received Bachelor’s Degree in Computer Studies in 2008 from NORTHUMBRIA Newcastle University UK. Received master’s degree in Software Engineering in 2011 from STAFFORDSHIRE University, UK. Received PhD in Software Engineering from Universiti Putra Malaysia....
-
Model-Based Evaluation of N2O Production Pathways in the Anammox-Enriched Granular Sludge Cultivated in a Sequencing Batch Reactor
PublicationA mechanistic model was developed as an extension of the Activated Sludge Model No. 1 to describe three nitrous oxide (N2O) production pathways in a laboratory-scale anammox-enriched granular sequencing batch reactor. Heterotrophic denitrification and two processes mediated by ammonia oxidizing bacteria (AOB), that is, ammonia (NH4+) oxidation via hydroxylamine (NH2OH) and autotrophic denitrification, were considered. A systematic...
-
Wpływ zmiennych własności adhezyjnych powierzchni klejonych na propagację pęknięcia w złączu Al/laminat epoksydowo - węglowy
PublicationPraca dotyczy oceny efektywności wstępnej obróbki powierzchni klejonych polegającej na zastosowaniu dwóch różnych sposobów obróbki (piaskowanie lub polerowanie), na tej samej próbce naprzemiennie. Badania przeprowadzono na próbce sklejonej z płytki aluminiowej i płytki z laminatu epoksydowo/węglowego z pęknięciem zainicjowanym przez wbicie znormalizowanego klina pomiędzy płytki (wedge test wg. Boeing'a). Badano przebieg propagacji...
-
SEM and TEM Studies on <i>In-Situ</i> Cast Al–TiC Composites
Publication -
Influence of W Addition on Microstructure and Mechanical Properties of Al-12%Si Alloys
Publication -
Quadratic Cohen representations in spectral analysis of serration process in Al–Mg alloys
PublicationImportant from mechanical point of view the Portevin–Le Chatelier serration phenomenon is being characterized by a complicated spectral profile. As a typical example of nonstationary processes it demands a special treatment allowing to follow the evolution of energy of stress fluctuations as a function of strain. The authors suggest the utilization of a compact system of quadratic transformations, known as Cohen class, as a technique...
-
Comparison of corrosion resistance of al-alloys by means of dynamic electrochemical impedance spectroscopy
PublicationPrzeprowadzono badania metodą dynamicznej elektrochemicznej spektroskopii impedancyjne stopów 1100 i 5162. Zaproponowano zastępcze modele elektryczne opisujące zachowanie się stopów w warunkach ekspozycji w roztworach zawierających wysokie stężenie jonów chlorkowych. Wyznaczono zmiany podstawowych parametrów elektrycznych układów zastępczych od potencjału. Stwierdzono wyższą podatność na korozję stopu 5162 w porównaniu ze stopem...
-
Laser assisted forming of the surface layer of Al-Si alloy at cryogenic conditions.
PublicationW artykule przedstawiono wpływ powierzchniowego laserowego przetapiania w warunkach kriogenicznych na mikrostrukturę, mikrotwardość i własności korozyjne stopu AlSi13Mg1CuNi. Stwierdzono korzystny wpływ obróbki laserowej na mikrostrukturę, mikrotwardość i odporność na zużycie ścierne badanego stopu aluminium.
-
Naprężeniowe pękanie korozyjne złączy spawanych nowego stopu Al-Mg ALUSTAR
PublicationWykonano pomiary wytrzymałości na rozciąganie, wydłużenia, czasu do zniszczenia, przewężenia i energii zniszczenia stopu rozciąganego z małą szybkością w powietrzu i 3,5 roztworze NaCl. Oceniono podatność złączy spawanych na korozję naprężeniową oraz możliwość zastosowania stopu ALUSTAR w budowie jednostek pływających.
-
Erratum: Cuceu, C., et al. Independent Mechanisms Lead to Genomic Instability in Hodgkin Lymphoma: Microsatellite or Chromosomal Instability. Cancers 2018, 10, 233
Publication -
Water Supply and Wastewater Disposal - Nowy - Nowy
e-Learning CoursesKurs jest przeznaczony dla studentów 1 semestru studiów II stopnia stacjonarnych w języku angielskim - specjalność Environmental Engineering. Kurs ma na celu zapoznanie studentów z zagadnieniami dotyczącymi zasobów wodnych, ujęć i uzdatniania wody, odbioru, transportu i zagospodarowania ścieków i wód opadowych, ze szczególnym uwzględnieniem rozwiązań zdecentralizowanych (m.in. retencja i rozsączanie wód opadowych, rozwiązania kanalizacji...
-
Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
PublicationOne of the main challenging issues in friction stir welding (FSW) of stiffened structures is maximizing skin and flange mixing. Among the various parameters in FSW that can affect the quality of mixing between skin and flange is tool plunge depth (TPD). In this research, the effects of TPD during FSW of an Al-Mg-Si alloy T-joint are investigated. The computational fluid dynamics (CFD) method can help understand TPD effects on FSW...
-
Comprehensive exploration of technological tensioning effects in welded thin plate girders: an in-depth investigation
PublicationThin-walled plate girders are widely used in structures and construction due to their effectiveness in transferring loads. The permanent deformations of the girder lead to a lack of stability, which necessarily leads to its replacement. Replacing permanently deformed thin-walled load-bearing structures requires large financial outlays. Technological prestressing is one of the most effective methods for studying and treating permanent...
-
Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water
PublicationWater pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention...
-
Al-Bayan-Journal of Quran and Hadith Studies
Journals -
Corrosion resistance evaluation of Al-based alloys by means of dynamic electrochemical impedance spectroscopy
PublicationW pracy przedstawiono wyniki badań stopów aluminium wykonane za pomocą dynamicznej elektrochemicznej spektroskopii. Na podstawie uzyskanych widm impedancyjnych zostały pokazane zmiany parametrów elektrycznego schematu zastępczego z potencjałem. Stwierdzono, że dodatek magnezu do badanego stopu obniża właściwości przeciwkorozyjne stopu.
-
Wytwarzanie blach bimetalowych al 99,98 -m1e wstępnie łączonych metodą zgrzewania wybuchowego
PublicationW artykule omówiono proces wytwarzania blach bimetalowych AL99,8-M1E obejmujący etap łączenia warstw stanowiących wsad bimetalowy oraz etap związany z ich plastycznym kształtowaniem poprzez walcowanie. Przedstawiono i omówiono wpływ parametrów procesu walcowania na nierównomierność odkształcenia warstw stanowiących bimetal.
-
Corrosion resistance evaluation of Al‐based alloys by means of dynamic electrochemical impedance spectroscopy
Publication -
Numerical Analysis of Twist Extrusion Pressing of Al-Mg-Mn-Sc-Zr Scalmalloy
Publication -
Enhancement of defects induced optical nonlinearity in Al: ZnO thin films by electron beam
Publication -
Study of Heat Source Model and Residual Stress Caused by Welding in GMAW of Al Alloy
Publication -
Mechanizm zużycia ściernego stopu Al-Si nadtapianego laserowo w niskiej temperaturze.
PublicationPrzedstawiono wyniki badań zużycia ściernego przy użyciu tribometru z ruchem posuwisto-zwrotnym oraz wirującej tarczy. Wykazano, że zużycie ścierne nie jest jednoznaczną funkcją parametrów nadtapiania laserowego. Wzrost mocy lasera powoduje wzrost twardości sprzyjający zwiększeniu odporności na zużycie ścierne stopu, ale zarazem także - wzrost chropowatości powierzchni sprzyjający spadkowi odporności.
-
Mechanism of hopping conduction in Be–Fe–Al–Te–O semiconducting glasses and glass–ceramics
PublicationElectrical properties of beryllium-alumino-tellurite glasses and glass–ceramics doped with iron ions were studied using impedance spectroscopy. The conductivity was measured over a wide frequency range from 10 mHz to 1 MHz and the temperature range from 213 to 473 K. The D.C. conductivity values showed a correlation with the Fe-ion concentration and ratio of iron ions on different valence states in the samples. On the basis of...
-
The role of the combined nitrogen-sulfur-carbon cycles for efficient performance of anammox-based systems
PublicationThe combined anammox/mixotrophic denitrification process was conducted in two granular sequencing batch reactors (SBRs) during a 200-day operation. Both reactors were fed with synthetic medium, but SBR2 was enriched with additional sulfate (SO4 2 ) which influenced sulfate reduction ammonium oxidation (SRAO) and heterotrophic reduction of SO4 2 by sulfate reducing bacteria. It was hypothesized that the addition of SO4 2 could...
-
Optimization of the Aeration Strategies in a Deammonification Sequencing Batch Reactor for Efficient Nitrogen Removal and Mitigation of N2O Production
PublicationIn deammonification systems, nitrite-oxidizing bacteria (NOB) suppression and nitrous oxide (N2O) mitigation are two important operational objectives. To carry out this multivariable analysis of response, a comprehensive model for the N cycle was developed and evaluated against experimental data from a laboratory-scale deammonification granular sludge sequencing batch reactor. Different aeration strategies were tested, and the manipulated...
-
Integrating conventional nitrogen removal with anammox in wastewater treatment systems: Microbial metabolism, sustainability and challenges
PublicationThe various forms of nitrogen (N), including ammonium (NH4+), nitrite (NO2−), and nitrate (NO3−), present in wastewaters can create critical biotic stress and can lead to hazardous phenomena that cause imbalances in biological diversity. Thus, biological nitrogen removal (BNR) from wastewaters is considered to be imperatively urgent. Therefore, anammox-based systems, i.e. partial nitrification and anaerobic ammonium oxidation (PN/anammox)...
-
Sustainable nitrogen removal in anammox-mediated systems: Microbial metabolic pathways, operational conditions and mathematical modelling
PublicationAnammox-mediated systems have attracted considerable attention as alternative cost-effective technologies for sustainable nitrogen (N) removal from wastewater. This review comprehensively highlights the importance of understanding microbial metabolism in anammox-mediated systems under crucial operation parameters, indicating the potentially wide applications for the sustainable treatment of N-containing wastewater. The partial...
-
Effects of Noncontact Shoulder Tool Velocities on Friction Stir Joining of Polyamide 6 (PA6)
PublicationIn this study, the effects of the traverse and rotational velocities of the noncontact shoulder tool on the heat generation and heated flux during the friction stir joining of high-density polyamide 6 (PA6) polymer were investigated. The computational fluid dynamics (CFD) method was employed to simulate the thermomechanical phenomena during the friction stir joining (FSJ) process of PA6. A developed model was used to consider the...
-
Achieving Efficient and Stable Deammonification at Low Temperatures—Experimental and Modeling Studies
PublicationThe short-term effects of temperature on deammonification sludge were evaluated in a laboratory-scale sequencing batch reactor (SBR). Mathematical modeling was used for further evaluations of different intermittent aeration strategies for achieving high and stable deammonification performance at decreasing temperatures. As for the biomass cultivated at high temperatures (e.g., 30 C), a higher temperature dependency (the adjusted...
-
Powikłania autologicznego przeszczepienia krwiotwórczych komórek macierzystych u pacjentki z układową amyloidozą AL
Publication -
Study of impurities in alpha-Al 2 O 3 powders and crystals using EPR spectroscopy
Publication -
Badania defektów w złączach adhezyjnych al/kompozyt węglowy z użyciem mikroskopii ultradźwiękowej
PublicationJednym z istotnych czynników decydujących o jakości złączy klejonych jest brak dużych pęcherzy i 'debondingów' w warstwie kleju. W celu wykrycia tych defektów można wykorzystać różne metody. Jedną z nich, przedstawioną w tej pracy do badań złączy adhezyjnych aluminium/kompozyt grafit/żywica epoksydowa, była mikroskopia ultradźwiękowa. Przeprowadzono próby ze sztucznymi wadami w złączu w celu oceny możliwości tej metody nie stosowanej...
-
Mechanizm nanokrystalizacji warstwy wierzchniej stopu Al-Si nadtapianego laserem w niskiej temperaturze.
PublicationPrzedstawiono mechanizm nanokrystalizacji stopu aluminium nadtapianego laserowo po schłodzeniu do niskiej temperatury w powiązaniu z obserwacjami struktury warstwy wierzchniej.
-
La vera vedova die vivare a Dio, e morire al mondo”. Le aspettative di Bernardino da Siena e Gilberto di Tournai riguardo al comportamento e ai doveri delle vedove,
Publication -
Al-Arabiyya-Journal of the American Association of Teachers of Arabic
Journals -
Al-Ihkam: Jurnal Hukum dan Pranata Sosial
Journals -
AL. Rivista di studi di Anthologia Latina
Journals -
Removal of Arsenic from Wastewater Using Hydrochar Prepared from Red Macroalgae: Investigating Its Adsorption Efficiency and Mechanism
PublicationArsenic (As) is a prominent carcinogen component produced via both geogenic and anthropogenic processes, posing serious risks to human health. This study aimed to investigate the potential of hydrochar prepared from red macroalgae for removing As from synthetic wastewater. The hydrochar was produced through 5 h hydrothermal carbonization (HTC) treatment at 200 °C, and then, chemically activated with ferric chloride hexahydrate...
-
Combined partial denitrification/anammox process for nitrogen removal in wastewater treatment
PublicationRecently, the combined partial denitrification and anammox (PD/anammox) has received special attention as a viable alternative for N removal using organic matter present in municipal wastewater. In comparison with conventional nitrification-denitrification, PD/anammox provides enormous opportunities to achieve sustainable wastewater treatment due to the lack of dissolved oxygen (DO) demand, a smaller amount of organic carbon (C)...
-
ANALYSIS OF THE PROJECT OF INNOVATIVE FLOATING TURBINE
PublicationThe design of a floating, innovative device for river water aeration and conversion of mechanical energy to electrical energy required the analysis of a number of geometrical and dynamic features. Such an analysis may be carried out on the basis of existing methods of numerical fluid mechanics. Models of pressures, forces and torques characteristic for the conversion of watercourse energy were developed for two basic concepts of...
-
Numeryczna analiza wpływu kierunku rozchodzenia się fali wybuchu na krzywiznę asymetrycznie walcowanego pasma Al-Cu. Numerical analysis the influence of the direction of explosion wave at the curvature of asymmetrical rolling of bimetallic plate.
PublicationW artykule przedstawiono numeryczną analizę wpływu kierunku rozchodzenia się fali wybuchu na krzywiznę asymetrycznie walcowanego pasma Al-Cu. Przeprowadzono symulacje dla procesu walcowania w temperaturze 20 C. Proces walcowania prowadzono w walcarce duo D 150 mm, o prędkości obwodowej 18,5 obr/min. Badania przeprowadzono dla dwóch stosunków grubości warstw 2/10 i 4/8. Symulację procesu przeprowadzono dla trzech gniotów 10%, 20%,...
-
Educare le fanciulle al sacramento del matrimonio. Testimonianze di scrittori e predicatori medievali
Publication -
Development of an Oxide Layer on Al 6061 Using Plasma Arc Electrolytic Oxidation in Silicate-Based Electrolyte
Publication -
Effect of CuO and Al 2 O 3 nanoparticle additives on the tribological behavior of fully formulated oils
Publication