Wyszukiwarka
Filtry
wszystkich: 37
Wyniki wyszukiwania dla: HOPPERS SUCTION DREDGERS
-
POWER EFFICIENCY OF POWER PLANTS ON TRAILING SUCTION HOPPER DREDGERS
PublikacjaThis paper presents the notion of operational power efficiency and compares it with the classical definition of power efficiency. There are presented also calculation results of power efficiency for a selected suction hopper dredger and also influence of power system type of suction hopper dredger on magnitude of power efficiency of its power plant has been highlighted.
-
Demand determination for electrical energy for trailing suction hopper dredgers
PublikacjaPrzedstawiono metodę określania obciążeń elektrowni w typowych stanach eksploatacji pogłębiarki ssącej nasiębiernej. Przedstawiono sposób określania średniego zapotrzebowania energii elektrycznej i jego odchylenia standardowego. Wykorzystano dane dokumentacji projektowych 10 pogłębiarek ssących nasiębiernych oraz wyniki badań eksploatacyjnych pogłębiarek zawarte w bazie danych DRAGA.
-
Selection of main engines for hopper suction dredgers with the use oobability models
PublikacjaThis paper presents a new original method of selection of main engines for hopper suction dredgers with regard to probabilistic models. It was proposed to use the normal distribution to describe the operational loads of the main receivers. The principles for determination of parameters of load distribution and design power of the main engines were formulated. Lastly, the principles of selection of the size and number of main engines...
-
Analysis of possibility and purposefulness of application of waste-heat boilers to trailing suction hopper dredgers
PublikacjaThis paper presents an analysis of possibility and purposefulness of application of waste-heat boilers to trailing suction hopper dredgers. Using results of own operational research on dredgers this author determined thermal power demand for six hypothetical trailing suction hopper dredgers of various size, at accounting for a type of power system and kind of fuel combusted by dredger's power plant. By means of basic indices of...
-
Operational loads of diesel engines on trailing suction hopper dredgers in their main service states
PublikacjaArtykuł przedstawia wyniki badań eksploatacyjnych ośmiu pogłębiarek ssących nasiębiernych. Badania eksploatacyjne obejmowały pomiary parametrów charakteryzujących warunki pracy dwóch podstawowych elementów układów energetycznych pogłębiarek: silników głównych i pomocniczych.
-
Steady magnetohydrodynamic flow in a diverging channel with suction or blowing
PublikacjaAn analysis is made of steady two-dimensional divergent flow of an electrically conducting incompressible viscous fluid in a channel formed by two non-parallel walls, the flow being caused by a source of fluid volume at the intersection of the walls. The fluid is permeated by a magnetic field produced by an electric current along the line of intersection of the channel walls. The walls are porous and subjected to either suction...
-
Experimental examination and modification of chip suction system in circular sawing machine
PublikacjaThe article presents the results of experimental examination of the wood chip suction system in the existing sliding table saw before and after its modifi cation. The studies focused on the extraction hood of the mentioned system. The methodical experimental research of the pressure distribution inside the hood during wood chip removal for the selected rotational speed of saw blades of 3500 and 6000 min-1 with a diameter of 300...
-
INFLUENCE OF DREDGER POWER PLANT TYPE AND DREDGER SIZE ON OUTPUT OF POWER PLANT INSTALLED ON TRAILING SUCTION HOPPER DREDGER
PublikacjaThis paper presents results of investigations dealing with influence of parameters characterizing size of suction hopper dredger as well as type of power system on magnitude of total output of combustion engines installed in dredger power plant.
-
Numerical calculations of wall pressures and stresses in steel cylindrical silos with concentric and eccentric hoppers
PublikacjaArtykuł przedstawia numeryczną analize naprężeń w płaszczu silosa. Porównane zostały wyniki dla silosów o przepływie centrycznym i mimośrodowym.
-
Analysis of changeability of operational loads of main engines on dredgers
PublikacjaArtykuł przedstawia analizę zmienności eksploatacyjnych obciążeń silników głównych i głównych odbiorników energii na trzech podstawowych typach pogłębiarek. Sformułowano zasady przetwarzania wyników pomiarów, jakie powinny być stosowane przy analizie statystycznej eksploatacyjnych obciążeń silników głównych i głównych odbiorników energii na pogłębiarkach
-
Steady magnetohydrodynamic flow in a diverging channel with suction or blowing
Publikacja -
Chip suction system in circular sawing machine: empirical research and computational fluid dynamics numerical simulations
PublikacjaThe experimental analysis of the wood chip removing system during its redesigning in the existing sliding table circular saw and computational fluid dynamic (CFD) numerical simulations of the air flow process is presented in the paper. The attention was focused on the extraction hood and the bottom shelter of the actual existing system. The main aim was to perform experimental research on the pressure distribution inside the...
-
Operational loads of power systems of bucket dredgers in main service states
PublikacjaW artykule zaprezentowano wyniki badań eksploatacyjnych silników spalinowych układów energetycznych pogłębiarek wieloczerpakowych. Badania dotyczyły obciążeń silników głównych i pomocniczych w podstawowych stanach eksploatacji pogłębiarki wieloczerpakowej.
-
Operational loads of dredge pumps in their basic service states on selected types of dredgers
PublikacjaArtykuł przedstawia wyniki badań eksploatacyjnych dotyczący jednego z najważniejszych odbiorników energii mechanicznej na pogłębiarkach - pomp gruntowych. Badania eksploatacyjne obejmowały pomiary parametrów charakteryzujących obciążenia pomp gruntowych w dwóch podstawowych stanach ich eksploatacji, a mianowicie podczas załadunku ładowni gruntowej (pogłębiarki lub szalandy) oraz podczas refulowania gruntu na ląd.
-
Comparative analysis of trailing suction hopper dredger's various types of power plants
PublikacjaArtykuł przedstawia analizę porównawczą różnych typów układu energetycznego pogłębiarki ssącej nasiębiernej przeznaczonej na Bałtyk południowy. Jako kryterium oceny analizowanych wariantów układu energetycznego pogłębiarki przyjęto koszty inwestycyjne oraz koszty paliwa. Wykorzystano wskaźniki ekonomiczne: AAC oraz NPV.
-
Investigations of operational driving loads of bucket chains and manoeuvre hoisting winches on multi-bucket dredgers
PublikacjaArtykuł dotyczy zagadnień wstępnego projektowania siłowni pogłębiarek wieloczerpakowych. Niniejszy artykuł przedstawia wyniki badań eksploatacyjnych sześciu pogłębiarek wieloczerpakowych. Badania eksploatacyjne obejmowały pomiary parametrów charakteryzujących warunki pracy dwóch podstawowych głównych odbiorników energii mechanicznej na pogłębiarkach wieloczerpakowych a mianowicie łańcuchów czerpakowych i zespołu wciągarek manewrowych....
-
Eksploatacyjne obciążenia śrub napędowych pogłębiarek różnych typów w podstawowych stanach ich eksploatacji = Operational loads of propellers of different dredgers types in main service states
PublikacjaArtykuł przedstawia wyniki badań eksploatacyjnych dotyczących jednego z najważniejszych odbiorników energii mechanicznej na pogłębiarkach: śrub napędowych. Badania eksploatacyjne obejmowały pomiary parametrów charakteryzujących obciążenia śrub napędowych pogłębiarek w dwóch podstawowych stanach ich eksploatacji: roboty pogłębiarskie i pływanie swobodne. Przedstawione w pracy wyniki obejmują 10 pogłębiarek (8 pogłębiarek ssących...
-
Parametric method applicable in assessing breakout force and time for lifting slender bodies from seabed
PublikacjaThe article presents a parametric method applicable in assessing the suction force of a slender body to the seabed, and prognosing the body extrication time. Along with the body weight in water, the information on the suction force is essential for assessing the force needed to lift the object from the seabed. Based on the Foda theory and the resulting integral equation, which relates the maximum suction force with basic parameters...
-
Selection of drive engines for dredge pumps
PublikacjaThis paper presents the principles of selecting drive engines for dredge pumps, formulated by this author. In order to formulate them influence of drive engines on dredge pump characteristics and dredger effectiveness, have been analyzed. Also, an analysis of results of the author's operational investigations concerning energy consumption and parameters of excavated soil transport on board dredgers has been performed.
-
Towards Designing an Innovative Industrial Fan: Developing Regression and Neural Models Based on Remote Mass Measurements
PublikacjaThis article presents the process of the construction and testing a remote, fully autonomous system for measuring the operational parameters of fans. The measurement results obtained made it possible to create and verify mathematical models using linear regression and neural networks. The process was implemented as part of the first stage of an innovative project. The article presents detailed steps of constructing a system to...
-
Laboratory test rig for examining aggregate mining from seabed using the AIRLIFT method
PublikacjaThe use of the Airlift method for transporting the mined aggregate from the seabed to the deck of the mining ship is an alternative for presently used solutions, such as suction pumps or scoop transport for instance. Building the laboratory test rig was preceded by tests in natural conditions. The rig was designed in such a way as to model these conditions as close as possible, and to have potential for further development
-
Innovative Implantable Left Ventricular Assist Device—Performance under Various Resistances and Operating Frequency Conditions
PublikacjaThis paper presents the operation of an innovative left ventricular assist device under various resistances and operating frequencies. The operating principle of the device is based on pulsatile blood flow, which is forced by a suction–discharge device pumping helium into a set of intra-cardiac balloons. In this way, the ejection fraction of the left ventricle is increased, and the mitral valve is additionally occluded. What is...
-
R&D of satellite pumps and motors with small geometrical displacement supplied with oil and non-flammable liquids
PublikacjaThe newest construction of satellite motors and self-suction satellite pumps with small geometrical displacement have been described in this article. The characteristics of volumetric and total efficiency of one satellite motor, selected from the series, supplied with oil have been presented. These characteristics have been compared with the orbital motors' characteristics. The remaining specifications of these motors were also...
-
Application in circular sawing machines of the experimental results of investigations of the chip removing system operation
PublikacjaThe experimental results of the chip removing system operation are presented. The main aim of them was to optimize suction system of the panel saw Fx3 and its follower Fx550. The attention was focused on the upper casing, which was the part of removing system. Within the framework of the work a systematic experimental study of pressure distribution in the casing during operation of the selected rotational speed of saw blade with...
-
Stability Analysis of the Floating Offshore Wind Turbine Support Structure of Cell Spar Type During its Installation
PublikacjaThe article presents the results of selected works related to the wider subject of the research conducted at the Faculty of Ocean Engineering and Ship Technology of the Gdansk University of Technology, which concerns design and technology of construction, towing, and settlement on the seabed, or anchoring, of supporting structures for offshore wind farms. As a result of this research, several designs of this type of objects were...
-
Fully Separated Flow Control Using DBD Plasma Actuators Located at the Leading Edge of an Airfoil
PublikacjaIn the framework of the PLASMAERO European project, experiments were conducted to investigate the authority of surface DBD plasma actuators to alter a fully separated flow around an airfoil in order to improve its aerodynamic performances in its natural stall regime. In this paper, unsteady excitation control is more specifically investigated. The key control parameter studied here is the burst frequency which periodically imposes...
-
Technology Concept of TLP Platform Towing and Installation in Waters with Depth of 60 m
PublikacjaThe article is part of the design and research work conducted at the Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, in cooperation with a number of other research centres, which concerns offshore wind farms planned to be built in the Polish zone of the Baltic sea in the next years. One of most difficult tasks in this project is building suitable foundations for each power unit consisting of a...
-
Developing a methodology for model tests of floating platforms in a towing tank of low depth
PublikacjaThe paper presents two ways to mooring model of semi-submersible platform for research in the small depth towing pool. The tested model was made in the likeness of 1:100 Thunder Horse platform moored in the Gulf of Mexico at a depth of 1,920 m. Its mooring system consisted of 16 semi-taut mooring lines (chain-wire-chain) spaced Star-shape and attached at the bottom to the suction piles. The tests were performed in the towing pool...
-
Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results
PublikacjaThis paper presents selected results and aspects of themultidisciplinary and interdisciplinary research oriented for the experimental and numerical study of the structural dynamics of a bend-twist coupled full scale section of awind turbine blade structure.Themain goal of the conducted research is to validate finite elementmodel of themodified wind turbine blade section mounted in the flexible support structure accordingly to the...
-
Rheology of Variable Viscosity‐Based Mixed Convective Inclined Magnetized Cross Nanofluid with Varying Thermal Conductivity
PublikacjaCross nanofluid possesses an extraordinary quality among the various fluidic models to explore the key characteristics of flowing fluid during very low and very high shear rates and its viscosity models depend upon shear rate. The current study establishes the numerical treatment regarding variable viscosity‐based mixed convective inclined magnetized Cross nanofluid with var‐ ying thermal conductivities over the moving permeable...
-
Developing Methodology for Model Tests of Floating Platforms in Low -Depth Towing Tank
PublikacjaThe paper presents two different methods of physical modeling of semi-submersible platform mooring system for research in low depth towing tank. The tested model was made in the scale of 1:100 resembling the "Thunder Horse" platform moored in the Gulf of Mexico at a depth of 1,920 m. Its mooring system consisted of 16 semi-taut mooring lines (chain-wire-chain) spaced starshape and attached at the bottom to suction piles. The tests...
-
Cattaneo–Christov heat flow model for copper–water nanofluid heat transfer under Marangoni convection and slip conditions
PublikacjaThis report is devoted to the study of the flow of MHD nanofluids through a vertical porous plate with a temperature-dependent surface tension using the Cattaneo–Christov heat flow model. The energy equation was formulated using the Cattaneo–Christov heat flux model instead of Fourier’s law of heat conduction. The Tiwari–Das model was used to take into account the concentration of nanoparticles when constructing the momentum equation....
-
Load capacity of steel-aluminium brackets under static and cyclic laboratory tests
PublikacjaThe aim of the research is the laboratory investigation of steel-aluminium brackets employed to fasten lightweight curtain walls to building facilities. Static pressure, suction forces, and cyclic loads parallel to end plates (horizontal – to simulate wind influence) were applied in the study. The steel-aluminium brackets were tested on a reinforced concrete substrate made of C30/37 concrete class to simulate the real working conditions....
-
An application for a new type of pneumatic engine concept
PublikacjaHeavy trucks are often equipped with loading and unloading systems like dock levellers with swing lip or telescopic lip. Most of these devices require hydro-electrical energy supply systems (eg. the pump that presses the working substance to the actuators must be propelled by electric engine.) The space taken by pump with electric engine can be reduced on condition that a new type of pneumatic drive will be considered. It is possible...
-
Influence of the low ambient temperature on the start-up process of hydraulic pumps
PublikacjaStarting hydraulic pumps in low ambient temperatures may cause: decreased hydraulic-mechanical efficiency, larger vibration of hydraulic installation, faster wear and more frequent damage to the elements of pumps, change of material properties of elements, increase of pressure drop. As a result of pressure drop in the suction pipe, large underpressure may be experienced, causing incomplete filling of pump working chambers with...
-
Development of a spray-ejector condenser for the use in a negative CO2 emission gas power plant
PublikacjaOne promising solution for developing low-emission power technologies is using gaseous fuel combustion in pure oxygen when the exhaust gas mixture is composed of H2O and CO2, and where CO2 is separated after steam condensation. The paper presents the results of computational analyses providing to the Spray-Ejector Condenser (SEC) development, which is one of the crucial components of the negative CO2 gas power plant (nCO2PP) cycle...
-
RESEARCH OF HYDRAULIC PISTON PUMPS’ START-UP IN LOW AMBIENT TEMPERATURES
PublikacjaStarting hydraulic pumps in low ambient temperatures may cause: decreased hydraulic-mechanical efficiency, larger vibration of hydraulic installation, faster wear and more frequent damage to the elements of pumps, change of material properties of elements, increase of pressure drop. As a result of increase of resistance of cold oil flow in the suction pipe, large underpressure may be experienced, causing incomplete filling of pump...