Wyszukiwarka
Filtry
wszystkich: 40
Wyniki wyszukiwania dla: NOx reduction
-
Final report on noise and rolling resistance
PublikacjaWork Package 6 deals with environmental impacts of PERS use, including noise and rolling resistance. This report covers preliminary noise tests performed in the laboratory and at the road test sites. The obtained results indicate that PERS material reduce noise considerably - up to 12 dB in comparison to SMA16 reference surface. Noise reduction properties are especially visible in the case of factory produced PERS slabs supplied...
-
Modelling long-term technological transition of Polish power system using MARKAL: Emission trade impact
PublikacjaThe need for technological transition of electricity production becomes a global problem. However, in coal-dominated Polish power system this need is even more crucial than anywhere, since technical lifetime of the most domestic power plants is ending. In this paper, the impact of the EU Emission Trading Scheme (EU ETS) for CO2 combined with sulfur dioxide (SO2) and nitrogen oxides (NOx) emission trading mechanism on power technology...
-
Denitrifcation rate in the mainstream deammonification
PublikacjaThe conventional processes of biological nitrogen removal based on nitrification and denitrification does not fit properly into the concept of the circular economy. As the alternative one should consider the deammonification process, which is a combination of partial nitrification (nitritation) and Anammox processes. It consists of removing ammonium nitrogen from wastewater under anaerobic conditions by a group of autotrophic microorganisms....
-
Reduction of CO2 Emissions from Offshore Combined Cycle Diesel Engine-Steam Turbine Power Plant Powered by Alternative Fuels
PublikacjaDiverse forms of environmental pollution arise with the introduction of materials or energy that exert adverse effects on human health, climate patterns, ecosystems, and beyond. Rigorous emission regulations for gases resulting from fuel combustion are being enforced by the European Union and the International Maritime Organization (IMO), directed at maritime sectors to mitigate emissions of SOx, NOx, and CO2. The IMO envisions...
-
Laboratory station for research of the innovative dry method of exhaust gas desulfurization for an engine powered with residual fuel
PublikacjaContemporary methods of exhaust gas desulfurization in marine engines are all expensive methods (4-5 million euro). This is, among other reasons, due to the limited market audience, but primarily due to the monop-olized position of manufacturers offering fabrication and assembly of this type of marine ship installations. Proposed as part of a research project financed by the Regional Fund for Environmental Protection and Maritime...
-
Negative impact of constant RPM control strategy on ship NOx emission in waves
PublikacjaIn severe wave conditions, the ship propulsion system is loaded with high fluctuations due to external disturbances. The highly fluctuating loads enforce radical changes in the main engine torque, which in turn demands variation of the fuel rate injected into the cylinders if a constant rotational speed strategy is applied. Therefore, the temperature of gases varies to a large extent during the combustion process in the cylinders....
-
Spalanie osadów ściekowych w piecu fluidalnym
PublikacjaPraca obejmuje zagadnienia wykorzystania osadów ściekowych do produkcji energii cieplnej, jak również unieszkodliwiania osadów ściekowych. Poruszono także problem emisji gazów: CO, NO, NOx.
-
Evaluation of the influence of the opening pressure of a marine Diesel engine injector on the results of numerical simulation of the working cycle and their comparison with the results of the laboratory experiment
PublikacjaThe article presents the results of a numerical simulation of the working process carried out in a diesel engine. In the applied utility program DIESEL-RK, the laboratory engine Farymann Diesel type D10 was implemented. A selected inoperability of its functional fuel supply system - reduced opening pressure of the injector pinj - was introduced. The values of adequate diagnostic parameters were determined: working gas temperature...
-
Pilot-Scale Studies of WO3/S-Doped g-C3N4 Heterojunction toward Photocatalytic NOx Removal
PublikacjaDue to the rising concentration of toxic nitrogen oxides (NOx) in the air, effective methods of NOx removal have been extensively studied recently. In the present study, the first developed WO3/S-doped g-C3N4 nanocomposite was synthesized using a facile method to remove NOx in air efficiently. The photocatalytic tests performed in a newly designed continuous-flow photoreactor with an LED array and online monitored NO2 and NO system...
-
Technologia spalania HiTAC
PublikacjaNarastające globalne zapotrzebowanie energetyczne, oraz wzrost świadomości ekologicznej społeczeństwa zaowocowały dużym zainteresowaniem przedsiębiorców nowymi technologiami spalania. Jedną z innowacyjnych technologii spalania wychodzącą na przeciw i spełniającą oczekiwania przemysłu jest technologia spalania HiTAC (ang. High Temperature Air Combustion). Technologia ta pozwala na optymalne egzergiczne pozyskiwanie energii w postaci...
-
Uwagi o adekwatności warunków testów emisyjnych ISO 8178 w odniesieniu do rzeczywistych warunków eksploatacji silników okrętowych
PublikacjaW referacie przedstawiono ogólną charakterystykę testów badawczych NOx silników jednostek pływających, ocenę trudności realizacji cykli badawczych silników głównych napędzających śrubę o skoku ustalonym podczas morskich prób zdawczych a także uwagi i ocenę adekwatności obciążeń zalecanych poszczególnymi testami w stosunku do obciążeń występujących podczas eksploatacji statków różnych typów.
-
Modelowanie jakości powietrza w powiązaniu z modelem numerycznym miasta z wykorzystaniem oprogramowania działającego na platformie wieloprocesorowej
PublikacjaArtykuł przedstawia wyniki modelowania zanieczyszczenia powietrza dla wybranych źródeł drogowych. Obliczenia emisji i propagacji zanieczyszczeń powietrza dokonano za pomocą modelu AUSTAL2000, dostępnego w aplikacji CadnaA. Przedstawiono wyniki analiz dla następujących substancji: SO2, NOx, PM10, benzen. Dodatkowo zamieszczono łączne wyniki zanieczyszczeń powietrza i poziomy hałasu dla rozpatrywanych dróg. Zastosowanie platformy...
-
The Emission and Combustion Characteristics of Marine Diesel Engine with Extreme Throttled of Air or Exhaust Ducts
PublikacjaPresented paper shows the results of the laboratory tests on the relationship between the extreme throttling of both air intake duct and exhaust gas duct and gaseous emission from the marine engine. The object of research is a laboratory, 4-stroke, DI diesel engine, operated at loads from 50 kW to 250 kW at a constant speed equal to 750 rpm. During the laboratory tests the thermodynamic and exhaust gas emission characteristics...
-
KTaO3-based nanocomposites for air treatment
PublikacjaThe advantage is that photocatalytic methods allow removing VOCs, NOx, SO2, deodorants, and microorganisms at the same system. The new third generation of photoactive materials activated by low powered and low cost irradiation sources (such as LEDs or black fluorescent UV lamps) can be used as photocatalysts in air purification systems. A series of single semiconductors and their nanocomposites combination were prepared using hydrothermal...
-
Optimization of Nuclear Power Share in the Structure of Electricity Production in Poland in Time Perspective by 2060
PublikacjaThe author of this paper presented the results of a system analysis using MARKAL model, aiming at the optimization of nuclear power share in power generation structure in Poland in time perspective by 2060. Optimization criterion is the minimization of the objective function, i.e. the total cost of energy system, taking into account constraints related to CO2, SOx and NOx emissions and obligatory shares of electricity from renewable...
-
Charakterystyka wielowymiarowa silnika spalinowego jako elementu hybrydowego układu napędowego pojazdu
PublikacjaCharakterystyka wielowymiarowa przypisuje kazdemu punktowi pracy silnika wektor, którego składowymi są, w rozważanym przypadku, jednostkowe zużycie paliwa ge oraz emisja jednostkowa toksycznych składników spalin: tlenku węgla CO, węglowodorów HC i tlenków azotu NOx. W referacie opisano stanowisko badawcze umożliwiające wykonanie pomiarów niezbędnych do wyznaczenia charakterystyki wielowymiarowej silnika spalinowego przeznaczonego...
-
Photocatalytic Air Purification
PublikacjaW publikacji zostały omówione mechanizmy i wpływ różnych czynników na fotokatalityczne usuwanie zanieczyszczeń powietrza, takich jak lotne związki organiczne (VOC), NOx i SO2. Został dokonany przegląd artykułów i patentów dotyczących przygotowywania fotokatalizatorów i technik ich osadzania na nośnikach. Zaprezentowane zostały przykłady fotoreaktorów przystosowanych do pracy w fazie gazowej. Część opisanych reaktorów może być użyta...
-
System do kondensacji wydychanego powietrza przy wykrywaniu biomarkerów chorób układu oddechowego
PublikacjaPraca opisuje konstrukcję oraz testy urządzenia zbierającego skropliny wydychanego powietrza, w których znadują się biomarkery chorób układu oddechowego. Celem urządzenia jest zwiększenie koncentracji biomarkerów, które mogą być następnie wykrywane za pomocą przygotowanego spektrofotometru i pH-metru. W pracy przedstawiono szczegółowo konstrukcję oraz sposób analizy zbieranych próbek. Skuteczność działania urządzenia przetestowano...
-
System do kondensacji wydychanego powietrza przy wykrywaniu biomarkerów chorób układu oddechowego
PublikacjaPraca opisuje konstrukcję oraz testy urządzenia zbierającego skropliny wydychanego powietrza, w których znadują się biomarkery chorób układu oddechowego. Celem urządzenia jest zwiększenie koncentracji biomarkerów, które mogą być następnie wykrywane za pomocą przygotowanego spektrofotometru i pH-metru. W pracy przedstawiono szczegółowo konstrukcję oraz sposób analizy zbieranych próbek. Skuteczność działania urządzenia przetestowano...
-
OPTYMALIZACJA UDZIAŁU ELEKTROWNI JĄDROWYCH W KRAJOWEJ STRUKTURZE WYTWARZANIA ENERGII ELEKTRYCZNEJ W PERSPEKTYWIE DO 2060 ROKU
PublikacjaW niniejszym referacie przedstawiono wyniki analizy systemowej z wykorzystaniem modelu MARKAL. Analiza ta miała na celu określenie optymalnego udziału elektrowni jądrowych, na tle innych opcji technologicznych, w krajowej strukturze wytwarzania energii elektrycznej w perspektywie do 2060 roku. Kryterium optymalizacyjnym była minimalizacja kosztów dostawy energii elektrycznej od wytwórcy do odbiorcy końcowego, z uwzględnieniem ograniczeń...
-
Power augmentation of PGE Gorzow's gas turbine by steam injection - thermodynamic overview
PublikacjaThe impact of steam injection upon a gas turbine and a combined power plant performance has been investigated. This article describes and summarizes possibilities of modification for current gas turbine in PGE Gorzow power plant into the Cheng cycle. Our modification deals with a thermal cycle, in which steam produced in a heat recovery steam generator is injected into the gas turbine's combustion chamber. It has been proved that...
-
WYNIKI SYMULACJI NUMERYCZNEJ CYKLU ROBOCZEGO SILNIKA O ZS W PROGRAMIE DIESEL-RK ORAZ OCENA ICH UŻYTECZNOŚCI W PROCESIE PLANOWANIA BADAŃ DIAGNOSTYCZNYCH OKRĘTOWEGO SILNIKA TŁOKOWEGO
PublikacjaW artykule przedstawiono wyniki symulacji numerycznej procesu roboczego realizowanego w silniku tłokowym o zapłonie samoczynnym. W zastosowanym programie użytkowym DIESEL-RK zaimplementowano silnik laboratoryjny Farymann Diesel typ D10. Wprowadzono wybraną niesprawność jego układu funkcjonalnego zasilania paliwem - obniżone ciśnienie otwarcia wtryskiwacza pwtr. Wyznaczono wartości adekwatnych parametrów diagnostycznych: temperaturę...
-
Enhanced photocatalytic activity of transparent carbon nanowall/TiO2 heterostructures
PublikacjaThe synthesis of novel tunable carbon-based nanostructure represented a pivotal point to enhance the efficiency of existing photocatalysts and to extend their applicability to a wider number of sustainable processes. In this letter, we describe a transparent photocatalytic heterostructure by growing boron-doped carbon nanowalls (B-CNWs) on quartz, followed by a simple TiO2 sol-gel deposition. The effect on the thickness and boron-doping...
-
Towards improved energy efficiency of future smart ships by application of advanced CFD simulations – case study
PublikacjaThe international trade plays crucial role in today’s globally developed world’s economy. Many people are unaware of the unimaginable volume of cargo being transported every year by oceans and seas. For most of the time invisible from land the shipping industry preserves its strong position of the most cost-efficient and environmental friendly mean of transport. However during last years the shipping industry is under great pressure...
-
On the Use of Selected 4th Generation Nuclear Reactors in Marine Power Plants
PublikacjaThis article provides a review of the possibility of using different types of reactors to power ships. The analyses were carried out for three different large vessels: a container ship, a liquid gas carrier and a bulk carrier. A novelty of this work is the analysis of the proposal to adapt marine power plants to ecological requirements in shipping by replacing the conventional propulsion system based on internal combustion engines...
-
Experimental investigation of performance and emission characteristics of a miniature gas turbine supplied by blends of kerosene and waste tyre pyrolysis oil
PublikacjaFossil fuels are non-renewable sources of energy that could be depleted in the near future, giving rise to amajor energy crisis. Scientists from all over the world are working on new technologies to produce fuelnot only from renewable sources but also from waste. This article is concerned with: (i) waste tyremanagement by means of the pyrolysis process, (ii) investigation of physico-chemical parameters ofwaste tyre pyrolysis oil...
-
Thermal utilization of meat-and-bone meal using the rotary kiln pyrolyzer and the fluidized bed boiler – The performance of pilot-scale installation
PublikacjaThermal utilization of meat-and-bone meal (MBM) is subject to stringent regulations that are meant to provide elimination of any potential pathogens. Incineration as well as other possible routes for thermal conversion of MBM are still at the research state. The universal technology was developed that allows to combust various types of waste organic materials, including animal waste, municipal solid waste and sludge, mixed at any...
-
NOx Photooxidation over Different Noble Metals Modified TiO2
PublikacjaWe compared the activity enhancement effect of noble metal deposited on TiO2 in photocatalytic nitrogen oxides oxidation. Titanium dioxide was decorated with Ag, Au, Pt or Pd in the sol-gel process. Synthesized catalysts were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller measurement (BET), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDX)....
-
Pilot installation for thermal utilization of meat-and-bone meal using the rotary kiln pyrolyzer and the fluidised bed boiler
PublikacjaThe technology of thermal utilization of meat-and-bone meal (MBM) is still at the research state. However, there are already a number of existing pilot-scale installations that provide the complete, effective and environmentally safe process conducting. The universal technology was developed that allows to combust various types of waste, including animal waste, municipal waste and sludge, mixed at any ratio with different types...
-
Investigation of the Combustion Processes in the Gas Turbine Module of an FPSO Operating on Associated Gas Conversion Products
PublikacjaIn this paper, we consider the issue of thermo-chemical heat recovery of waste heat from gas turbine engines for the steam conversion of associated gas for offshore vessels. Current trends in the development of offshore infrastructure are identified, and the composition of power plants for mobile offshore drilling units and FPSO vessels is analyzed. We present the results of a comparison of power-to-volume ratio, power-to-weight...
-
On energy, exergy, and environmental aspects of a combined gas-steam cycle for heat and power generation undergoing a process of retrofitting by steam injection
PublikacjaThe paper presents a study of retrofitting of a combined heat and power (CHP) plant aimed to increase the electric to heating power ratio. The modification would involve diverting part of the steam to the gas turbine, instead of letting it go to the steam turbine, using injection technique into a combustion chamber. Therefore, two potential retrofitting approaches are analyzed: steam injection gas turbine (STIGT) and combined steam...
-
The Effect of Oxygenated Diesel-N-Butanol Fuel Blends on Combustion, Performance, and Exhaust Emissions of a Turbocharged CRDI Diesel Engine
PublikacjaThe article deals with the effects made by using various n-butanol-diesel fuel blends on the combustion history, engine performance and exhaust emissions of a turbocharged four-stroke, four-cylinder, CRDI 1154HP (85 kW) diesel engine. At first, load characteristics were taken when running an engine with normal diesel fuel (DF) to have ‘baseline’ parameters at the two ranges of speed of 1800 and 2500 rpm. Four a fossil diesel (class...
-
Mobile system for on-road measurements of air pollutants
PublikacjaW pracy zaprezentowano prototyp mobilnej stacji diagnostycznej do pomiarów stężeń typowych zanieczyszczeń powietrza (C6H6, NO2, NOx, CO i CO2) pochodzących z komunikacji w miastach. Nowością proponowanego systemu jest możliwość przeprowadzania pomiarów emisji zanieczyszczeń wzdłuż ciągów komunikacyjnych i w miejscach, w których nie mogą być zastosowane stacjonarne stacje monitoringowe. W proponowanym rozwiązaniu, urządzenie...
-
The role of additives in improving the flammability and calorific value of leather shavings and the binding of chromium compounds in ash
PublikacjaLeather processing companies are struggling with the problem of increasing costs of post-production waste disposal. Therefore, the issue of thermal waste disposal at the plant and the use of generated heat in the production process is becoming more and more popular. Leather waste on its own does not allow for autothermal combustion despite the sufficient higher heating value (HHV). Therefore the Authors proposed to improve the...
-
Flexible syngas-biogas-hydrogen fueling spark-ignition engine behaviors with optimized fuel compositions and control parameters
PublikacjaThis paper presents the results research on the optimal fuel compositions and the control parameters of the spark ignition engine fueled with syngas-biogas-hydrogen for the purpose of setting up a flexible electronic control unit for the engine working in a solar-biomass hybrid renewable energy system. In syngas-biogas-hydrogen mixture, the optimal content of hydrogen and biogas is 20% and 30%, respectively. Exceeding these thresholds,...
-
A comparative study of pentanol (C5 alcohol) and kerosene blends in terms of gas turbine engine performance and exhaust gas emission
PublikacjaThe growing demand for sustainable and clean energy sources provides the incentive for the development of alternative fuels. Simultaneously, the development of gas turbine technologies with flexible fuel supply systems enables the use of alternative non-fossil fuels that can play key roles in contributing to global efforts in meeting emissions targets. This paper presents the current state of knowledge on the production and potential...
-
Recent advances in hydrogen production from biomass waste with a focus on pyrolysis and gasification
PublikacjaThis paper presents the results research on the optimal fuel compositions and the control parameters of the spark ignition engine fueled with syngas-biogas-hydrogen for the purpose of setting up a flexible electronic control unit for the engine working in a solar-biomass hybrid renewable energy system. In syngas-biogas-hydrogen mixture, the optimal content of hydrogen and biogas is 20% and 30%, respectively. Exceeding these thresholds,...
-
Modeling organic nitrogen conversions in activated sludge bioreactors
PublikacjaFor biological nutrient removal (BNR) systems designed to maximize nitrogen removal, the effluent total nitrogen (TN) concentration may range from 2.0 to 4.0 g N/m3 with about 25-50% in the form of organic nitrogen (ON). In this study, current approaches to modeling organic N conversions (separate processes vs. constant contents of organic fractions) were compared. A new conceptual model of ON conversions was developed and combined...
-
The Staged Combustion of Meat-and-Bone Meal:The Characteristics of Conversion Sub-processes and Large-Scale Process Outputs
Publikacjat Organic waste has been playing an increasingly important role in the energy market as those that may support the economies in pursuing towards decarbonization by increasing the share of renewables in the overall energy balance. In this group of alternative fuels, meat-and-bone meals being a post-production waste of the steadily developing meat industry, constitute a considerable proportion. Though they are rich in minerals, their...
-
The importance of individual spray properties in performance improvement of a urea-SCR system employing flash-boiling injection
PublikacjaThe appropriate mixing of a urea–water solution (UWS) with exhaust gases in a selective catalytic reduction system is crucial to efficiently reduce nitrogen oxides and diminish the deposition of liquid wall film. One of the methods to enhance the mixing of the UWS with the exhaust gases is a flash-boiling injection. Its positive effect has been linked with a reduced Sauter mean diameter (SMD) and improved evaporation, but the...