Wyniki wyszukiwania dla: burnside ring

• DLC coating in ring-on-ring sliding with saline solution (0.9% wt.) lubrication 20MPa/0.1m/s

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  Wear tests in sliding friction of DLC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, DLC-W over DLC-W. Mean contact stress: 20MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9% wt.). Tribometer: PT-3. Overall test time >15h. The test was augmented...

• DLC coating in ring-on-ring sliding with saline solution (0.9% wt.) lubrication 10MPa/0.1m/s

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  Wear tests in sliding friction of DLC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, DLC-W over DLC-W. Mean contact stress: 10MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9% wt.). Tribometer: PT-3. Overall test time >15h. The test was augmented...

• Ag(e)ing and Degradation of Supercapacitors: Causes, Mechanisms, Models and Countermeasures

  Publikacja

  • X. Chen
  • Y. Wu
  • R. Holze

  - MOLECULES - Rok 2023

  Pełny tekst do pobrania w serwisie zewnętrznym

• Microbial community changes along the Ecology Glacier ablation zone (King George Island, Antarctica)

  Publikacja

  • J. Grzesiak
  • M. Zdanowski
  • D. Górniak
  • A. Świątecki
  • T. Aleksandrzak-Piekarczyk
  • K. Szatraj
  • J. Sasin-Kurowska
  • M. Nieckarz

  - POLAR BIOLOGY - Rok 2015

  Pełny tekst do pobrania w serwisie zewnętrznym

• Experimental investigations of hydraulic jump created by a two-phase impin-ging jet on a solid surface

  Publikacja

  • S. Gumkowski

  - Transactions of the Institute of Fluid-Flow Machinery - Rok 2003

  Przedstawiono rezultaty badań eksperymentalnych powstawania uskoku hydraulicznego tworzonego przez dwufazową strugę uderzającą.

• Tree rings as an indicator of atmospheric pollutant deposition to subalpine spruce forests in the Sudetes (Southern Poland)

  Publikacja

  • M. Godek
  • M. Sobik
  • M. Błas
  • Ż. Polkowska
  • P. Owczarek
  • A. Bokwa

  - ATMOSPHERIC RESEARCH - Rok 2015

  In spite of their moderate altitude (1000–1600m a.s.l.), the Western SudetyMountains belong to areas with the most efficient fog precipitation in Europe. Intense industrial activity in the area of windward western foothills caused an exceptional intensification of atmospheric pollutant deposition via precipitation and fog to take place since the 1950s. In the second half of the 1970s a massive spruce forest dieback began affecting...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Culturable bacteria community development in postglacial soils of Ecology Glacier, King George Island, Antarctica

  Publikacja

  • M. K. Zdanowski
  • M. J. Żmuda-Baranowska
  • P. Borsuk
  • A. Świątecki
  • D. Górniak
  • D. Wolicka
  • K. M. Jankowska
  • J. Grzesiak

  - POLAR BIOLOGY - Rok 2012

  Glacier forelands are excellent sites in which to study microbial succession because conditions change rapidly in the emerging soil. Development of the bacterial community was studied along two transects on lateral moraines of Ecology Glacier, King George Island, by culture-dependent and culture-independent approaches (denaturating gradient gel electrophoresis). Environmental conditions such as cryoturbation and soil composition...

  Pełny tekst do pobrania w portalu

• Electoral support for extreme right-wing parties: A sub-national analysis of western European elections

  Publikacja

  • D. Jesuit
  • P. Paradowski
  • V. Mahler

  - ELECTORAL STUDIES - Rok 2009

  This paper addresses two major limitations of cross-national research on electoral support for extreme right parties (ERPs) in western Europe: its almost exclusive focus on national-level data and its failure to examine the role of the social welfare state and social capital. We employ Tobit I estimations in an additive and interactive model and compute conditional coefficients and standard errors for several interactive variables....

  Pełny tekst do pobrania w serwisie zewnętrznym

• Wpływ obwodnicy Trójmiasta na chemizm wód powierzchniowych niewielkich zagłębień bezodpływowych = The impact of the Gdańsk's ring road on the chemical composition of the surface waters in small outflowless pools

  Publikacja

  • W. Staszek
  • Ż. Polkowska
  • A. Dubiella-Jackowska

  - Rok 2007

  Przedstawiono wyniki badań wpływu Obwodnicy Trójmiasta na chemizm wód niewielkich zbiorników bezodpływowych. Próbki poddano analizie na zawartość wybranych kationów i anionów oraz zbadano takie parametry jak pH oraz przewodnictwo. Uzyskane wyniki bardzo jasno wskazują na wysoki wpływ obwodnicy na skład i rodzaj zanieczyszczeń obecnych w badanych próbkach. Zaobserwowano m.in. alkalizację badanych wód oraz wysoki poziom stężeń takich...

• (R,R)-1-Acetyl-1'-(2,4,6-trinitrophenyl)-2,2'-bipyrrolidine

  Publikacja

  • K. Eichstaedt
  • T. Olszewska
  • M. Gdaniec

  - ACTA CRYSTALLOGRAPHICA SECTION E-STRUCTURE REPORTS ONLINE - Rok 2013

  (R,R)-1-Acetyl-1'-(2,4,6-trinitrophenyl)-2,2'-bipyrrolidine has been synthesized and its rentgenostructure has been determined. The structure of the title molecule, C16H19N5O7, is mainly determined by the steric effect of a bulky 2,4,6-trinitrophenyl group attached to the N atom of a pyrrolidine ring. Both pyrrolidine rings adopt an envelope conformation, with one of the methylene C atoms as the flap in each case, and the N-C-C-N...

  Pełny tekst do pobrania w portalu

• CrN coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #A23/#B22

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of CrN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, CrN  over CrN . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration 12 min. The...

• TiC coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #B39/#A41

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of TiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiC over TiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  3 min. The test...

• TiN coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #A45/#A47

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of TiN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiN over TiN. Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  20 min. The test...

• SiC coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #B34/#A33

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of SiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, SiC over SiC. Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  3 min. The test...

• TiN coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #A45/#B45

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of TiN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiN over TiN. Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  90 min. The test...

• TiC coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #A41/#B39

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of TiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiC  over TiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  3 min. The...

• CrN coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #B22/#A23

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of CrN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, CrN over CrN. Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  6 min. The test...

• SiC coating in ring-on-ring sliding with distlled water lubrication 5MPa, 0.1m/s specimn. #A33/#B34

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. distilled water lubrication

  Wear tests in sliding friction of SiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, SiC  over SiC. Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: DISTILLED WATER. Tribometer: PT-3. Overall test time till coating penetration  3 min. The test...

• Annals of King Edward Medical University Lahore Pakistan

  Czasopisma

  ISSN: 2079-7192 , eISSN: 2079-0694

• Reaction of 4-benzylidene-2-methyl-5-oxazolone with amines, Part 2: Influence of substituents in para-position in the phenyl ring and a substituent on amine nitrogen atom on the reaction kinetics

  Publikacja

  • B. Bet?akowska
  • B. Banecki
  • C. Czaplewski
  • L. ?ankiewicz
  • W. Wiczk
  • C. Czaplewski

  - INTERNATIONAL JOURNAL OF CHEMICAL KINETICS - Rok 2002

  Pełny tekst do pobrania w serwisie zewnętrznym

• Wpływ falistości pierścienia ślizgowego na rozpływ prądu w zestyku ślizgowym maszyny synchronicznej = Influence of slip-ring waviness on current distribution in the sliding contact of a synchronous machine

  Publikacja

  • A. Wilk
  • P. Dobrowolski
  • G. A. Kostro

  - Rok 2005

  Zestyk ślizgowy maszyny synchronicznej średniej i dużej mocy zawiera na ogół szereg równolegle pracujących szczotek na każdym z pierścieni. Szczotki znajdują się w oprawkach szczotkowych rozmieszczonych przestrzennie wzdłuż obwodu pierścienia. To sprawia, że pracują one w tej samej chwili czasowej na różnych fragmentach pierścienia ślizgowego. Nierównomierny rozpływ prądu może spowodować nadmierne obciążenie niektórych szczotek....

• The ability to overcome multidrug resistance of tumor cell lines by novel acridine cytostatics with condensed heterocyclic rings

  Publikacja

  • M. Bontemps-Gracz
  • A. Kupiec
  • I. Antonini
  • E. Borowski

  - Acta Biochimica Polonica - Rok 2002

  Zbadano aktywność cytotoksyczną, in vitzo dwóch nowych grup cytostatyków akrydynowych zawierających skondensowane pierścienie heterocykliczne w stosunku do komórek nowotworowych linii wrażliwych i opornych. Otrzymane wyniki potwierdziły naszą wcześniejszą hipotezę o istotnej roli pierścieni hetero-cyklicznych w pokonywaniu krzyżowej oporności wielolekowej.

  Pełny tekst do pobrania w portalu

• A Multi Rig Screening Test for Thin Ceramic Coatings in Bio-Tribological Applications

  Publikacja

  • J. Łubiński
  • K. Druet
  • A. Olszewski
  • A. Neyman
  • J. Sikora

  - JOURNAL OF BIOMECHANICS - Rok 2010

  Zaprezentowano metodę badań ogólnej charakterystyki tribologicznej cienkich powłok ceramicznych z wykorzystaniem równoległych testów na wielu stanowiskach o różnej konfiguracji styku powierzchni trących i przy ruchu o różnym charakterze (jednokierunkowym i posuwisto zwrotnym). Przedstawiono wyniki porównania przy pomocy jednoczesnej analizy wyników testów z różnych stanowisk; w wyniku testów uzyskano ranking powłok ze wskazaniem...

  Pełny tekst do pobrania w serwisie zewnętrznym

• A Multi Rig Screening Test for Thin Ceramic Coatings in Bio - Tribological Applications

  Publikacja

  • J. Łubiński
  • K. Druet
  • A. Olszewski
  • A. Neyman
  • J. Sikora

  - Advances in Materials Science - Rok 2010

  A method is presented for the comparative testing of wear resistance of ceramic coatings made from materials potentially feasible in tribo - medical applications, mainly orthopaedic implants made from ceramics coated metals for low cost, long life and low wear particle emission into the body. The method was devised as the main tool for use in research and is comprised of flat on flat and ball on flat surface (sliding) tests. Seven...

  Pełny tekst do pobrania w portalu

• Corrosion hazards and inhibitor protection in the seawater injection system on the Baltic sea rig

  Publikacja

  • K. Domańska
  • P. Igliński
  • J. Orlikowski
  • K. Żakowski
  • K. Darowicki

  - International Journal of Corrosion and Scale Inhibition - Rok 2020

  Oil extraction efficiency in LOTOS Petrobaltic Company is increased by means of injection of seawater into an oilfield aquifer, which is implemented on the Baltic Beta rig, operating on the Baltic Sea. Operational experience has shown a significant degree of corrosion aggressiveness in the injected water, which necessitates frequent repairs of the seawater injection installation. Evaluation of the corrosion phenomena is crucial...

  Pełny tekst do pobrania w portalu

• DLC coating doped with W in ring-on-ring sliding with saline solution (0.9% wt.) lubrication 20MPa/0.1m/s

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  Wear tests in sliding friction of 1% W (tungsten) doped DLC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, DLC-W over DLC-W. Mean contact stress: 20MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9% wt.). Tribometer: PT-3. Overall test time >15h....

• DLC coating doped with W in ring-on-ring sliding with saline solution (0.9% wt.) lubrication 10MPa/0.1m/s

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  Wear tests in sliding friction of 1% W (tungsten) doped DLC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, DLC-W over DLC-W. Mean contact stress: 10MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9% wt.). Tribometer: PT-3. Overall test time >15h....

• TiN coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #B48/#A45

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of TiN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiN over TiN . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 12 min....

• SiC coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #B37/#A35

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of SiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, SiC over SiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 3 min.Secimen...

• CrN coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #B21/#A21

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of CrN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, CrN  over CrN . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 25 min....

• TiC coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #B41/#A39

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of TiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiC over TiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 9 min....

• TiC coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #A39/#B41

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of TiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiC over TiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 3 min.Secimen...

• SiC coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #A35/#B37

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of SiC coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, SiC over SiC . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 3 min.Secimen...

• TiN coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #A45/#B48

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of TiN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, TiN over TiN . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 12 min....

• CrN coating in ring-on-ring sliding with saline solution (0.9%) lubrication 5MPa, 0.1m/s specimn. #A25/#B21

  Dane Badawcze

  open access

  • A. Neyman
  • J. Łubiński
  • A. Olszewski
  • K. Druet

  - seria: Wear of ultra thin PVD ceramic coatings on stainless steel in ring-on-ring sliding w. saline solution (0.9%) lubrication

  Wear tests in sliding friction of CrN coating on 1.4021 (EN 10088-1) heat treated stainless steel. Ring - on - ring contact in unidirectional sliding, CrN  over CrN . Mean contact stress: 5MPa. Sliding velocity: 0,1 m/s. Mean friction radius: 9.5mm. Lubricant: SALINE SOLUTION (0.9%). Tribometer: PT-3. Overall test time till coating penetration 9 min....

• Pharmaceuticals and another groups of emerging contaminants: Occurrence and sources in Admiralty Bay (King George Island, Maritime Antarctica)

  Publikacja

  • M. Szopińska
  • A. Łuczkiewicz
  • S. Fudala-Książek
  • J. Potapowicz
  • O. Svahn
  • E. Bjorklund
  • Ż. Polkowska

  - Rok 2021

  Everyday live activities may introduce a wide range of chemicals into wastewater systems. In this study presence of selected types of pharmaceuticals from cardiovascular system group, nervous and muscolo-skeleton system group, antimicrobial agents, genitourinary and sex hormones were tested in the wastewater from H. Arctowski Antarctic station. Moreover, the receiver of discharged wastewater (Admiralty Bay) were also studied. Considering...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Numerical analysis of the flow rig for UWS spray examination in exhaust system-relevant conditions

  Publikacja

  • K. Górka
  • B. Kaźmierski
  • Ł. J. Kapusta

  - Combustion Engines - Rok 2021

  In the present study, a flow rig with optical access intended for spray investigations in exhaust system-relevant conditions was analysed in terms of flow and temperature in the spray area using numerical simulations. The operation of the rig was examined for a wide range of exhaust mass flow rates, temperatures and various forms of UWS (urea-water solution) spray plumes. The locations of the injector and thermocouple were verified....

  Pełny tekst do pobrania w serwisie zewnętrznym

• Experimental investigations of prototype od solar collector on the rig equipped with artificial source of illumination

  Publikacja

  • J. Majewski
  • D. Mikielewicz
  • J. Wajs
  • J. Zygmunt

  - Rok 2006

  W pracy opisano badania eksperymentalne prowadzone w Katedrze Techniki Cieplnej Politechniki Gdańskiej, dotyczące prototypowego cieczowego kolektora słonecznego, wykonanego z organicznego tworzywa sztucznego. Badania cieplne przeprowadzono metodą porównanwczą, przy czym kolektorem odniesienia był kolektor słoneczny Aparel produkowany na rynku krajowym. W artykule opisano też stanowisko badawcze zaprojektowane i zbudowane jako moblina...

• Laboratory test rig for examining aggregate mining from seabed using the AIRLIFT method

  Publikacja

  • C. Dymarski
  • T. Pająk

  - Polish Maritime Research - Rok 2018

  The use of the Airlift method for transporting the mined aggregate from the seabed to the deck of the mining ship is an alternative for presently used solutions, such as suction pumps or scoop transport for instance. Building the laboratory test rig was preceded by tests in natural conditions. The rig was designed in such a way as to model these conditions as close as possible, and to have potential for further development

  Pełny tekst do pobrania w portalu

• Zhonghua wei zhong bing ji jiu yi xue

  Czasopisma

  ISSN: 2095-4352

• Scientific Journal of King Faisal University: Basic and Applied Sciences

  Czasopisma

  ISSN: 1658-0311

• Crystallographic study of self-organization in the solid state including quasi-aromatic pseudo-ring stacking interactions in 1-benzoyl-3-(3,4-dimethoxyphenyl)thiourea and 1-benzoyl-3-(2-hydroxypropyl)thiourea

  Publikacja

  • A. Okuniewski
  • D. Rosiak
  • J. Chojnacki
  • B. Becker

  - Acta Crystallographica Section C-Structural Chemistry - Rok 2017

  1-Benzoylthioureas contain both carbonyl and thiocarbonyl functional groups and are of interest for their biological activity, metal coordination ability and involvement in hydrogen-bond formation. Two novel 1-benzoylthiourea derivatives, namely 1-benzoyl-3-(3,4-dimethoxyphenyl)thiourea, C₁₆H₁₆N₂O₃S, (I), and 1-benzoyl-3-(2-hydroxypropyl)thiourea, C₁₁H₁₄N₂O₂S, (II), have been synthesized and characterized. Compound (I) crystallizes...

  Pełny tekst do pobrania w portalu

• Data set generation at novel test-rig for validation of numerical models for modeling granular flows

  Publikacja

  • A. Widuch
  • K. Myöhänen
  • M. Nikku
  • M. L. Nowak
  • A. Klimanek
  • W. Adamczyk

  - INTERNATIONAL JOURNAL OF MULTIPHASE FLOW - Rok 2021

  Significant effort has been exerted on developing fast and reliable numerical models for modeling particulate flow; this is challenging owing to the complexity of such flows. To achieve this, reliable and high-quality experimental data are required for model development and validation. This study presents the design of a novel test-rig that allows the visualization and measurement of particle flow patterns during the collision...

  Pełny tekst do pobrania w portalu

• Modernized cathodic protection system for legs of the production rig – Evaluation during ten years of service

  Publikacja

  • K. Żakowski
  • P. Igliński
  • J. Orlikowski
  • K. Darowicki
  • K. Domańska

  - OCEAN ENGINEERING - Rok 2020

  The modernization of cathodic protection system of the Baltic Beta platform legs is described. It was that the sacrificial anodes cone-shaped groups were to be placed on the seabed at a depth of 80 m. The measurements results of cathodic protection effectiveness during its ten-years operation are presented. The effectiveness was assessed based on the potential value along the entire length of the legs from the sea surface to the...

  Pełny tekst do pobrania w portalu

• Multi-criteria Robot Selection Problem for an Automated Single-Sided Lapping System

  Publikacja

  • N. Piotrowski
  • A. Barylski

  - Rok 2016

  Flat lapping is a crucial process in a number of precision manufacturing technologies. Its aim is to achieve extremely high flatness of the workpiece. Single-sided lapping machines have usually standard kinematic systems and are used in conjunction with conditioning rings, which are set properly be-tween the center and the periphery of the lapping plate. In this paper, instead of conventional single-side lapping machine, an automated...

  Pełny tekst do pobrania w serwisie zewnętrznym

• Bing du xue bao = Chinese journal of virology / [bian ji, Bing du xue bao bian ji wei yuan hui]

  Czasopisma

  ISSN: 1000-8721

• Investigation on environmental chemistry changes in the Antarctic Special Management Area (ASMA 1): King George Island, South Shetlands Islands

  Publikacja

  • J. Potapowicz

  - Rok 2022

  The doctoral dissertation included a review of the scientific literature that resulted in the selection of the research area, type of samples and chemical species that were marked. The published series of articles contains an in-depth description of the results of chemical analyses of surface water, sediment and snow samples from the Antarctic Specially Managed Area (ASMA 1) – King George Island. In addition, studies have been...

  Pełny tekst do pobrania w portalu

• Synthesis of 11,12-dihydro benzo[c]phenanthridines via a Pd-catalyzed unusual construction of isocoumarin ring/FeCl3-mediated intramolecular arene-allyl cyclization: First identification of a benzo[c]phenanthridine based PDE4 inhibitor

  Publikacja

  • B. Thirupataiah
  • G. Reddy
  • S. Ghule
  • J. Kumar
  • G. Mounika
  • J. Mudgal
  • J. Mathew
  • G. Shenoy
  • K. Parsa
  • M. Pal
  • K. A. Hossain

  - BIOORGANIC CHEMISTRY - Rok 2020

  Pełny tekst do pobrania w serwisie zewnętrznym

• Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #24 - #25.

  Dane Badawcze

  open access

  • J. Łubiński
  • T. Łubiński
  • K. Druet

  - seria: Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics. Paraffin oil lubrication.

  Specimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #24 (upper, rotating), #25 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...

• Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #28 - #29.

  Dane Badawcze

  open access

  • J. Łubiński
  • T. Łubiński
  • K. Druet

  - seria: Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics. Paraffin oil lubrication.

  Specimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #28 (upper, rotating), #29 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...