dr inż. Łukasz Pyrzowski
Employment
- Assistant professor at Katedra Wytrzymałości Materiałów
Publications
Filters
total: 125
Catalog Publications
-
A novel sandwich footbridge - Practical application of laminated composites in bridge design and in situ measurements of static response
PublicationA novel sandwich composite footbridge is presented in the paper, as an example of practical application of laminated composites in civil engineering. The in situ static load tests of the footbridge before its acceptation for exploitation are shown and discussed. The results are compared with the corresponding ones from a numerical equivalent single layer model of the sandwich structure created within the framework of finite element...
-
Modal properties identification of a novel sandwich footbridge – Comparison of measured dynamic response and FEA
PublicationA modern sandwich composite footbridge made of high-tech materials, being an example of practical application of laminated composites in civil engineering, is presented. The in situ non-destructive testing of the footbridge, aiming to identify modal properties and pedestrian comfort, is described. The measured eigenmodes and eigenfrequencies are compared with numerically estimated values. Finite element analyses of the footbridge...
-
Structural Health Monitoring of Composite Shell Footbridge for Its Design Validation
PublicationThe paper presents the structural health monitoring system of the composite bridge for pedestrians and cyclists. The footbridge was designed and manufactured within the FOBRIDGE project. It is the first bridge in the world, which is classified as a consistent single element structural girder, made of sandwich shells, entirely produced in a single cycle. The developed structural health monitoring system, supported design process,...
-
Composite GFRP U-shaped footbridge
PublicationThe paper presents proposals for the use of glass fiber reinforced polymer composites for the construction of engineering objects, known and commonly used in the shipbuilding industry. An example of a pedestrian footbridge was used in this case, which, despite the considerable thickness of the structural material, was made using infusion technology in one production cycle. The designed and produced footbridge span is durable, dynamically...
-
Technical monitoring system for a new part of Gdańsk Deepwater Container Terminal
PublicationDevelopment strategy for the port of Gdańsk assumes that , up to 2027, it will become the main transport centre in the Baltic Sea region. To this end , for many years work has been carried out to facilitate access to the port both by sea and land. One of the elements of extension of the port is the building of another terminal of Deepwater Container Terminal , Gdańsk. In this task, geotechnical operations aimed at appropriate...
-
Reference FEM model for SHM system of cable-stayed bridge in Rzeszów
PublicationThe paper presents the references model for structural health monitoring system (SHM) of cable-stayed bridge recently constructed in Rzeszów over Wisłok River. The SHM system is design to provide on-line information on the structure state and facilitate its maintenance procedures. The main feature of the SHM system is permanent observation of the dynamic behavior of the bridge with focus on cable vibrations. The paper discusses...
-
Numerical modeling and experimental validation of full-scale segment to support design of novel GFRP footbridge
PublicationThe paper contains analysis of full-scaled three meters long segment of a novel composite footbridge. Both numerical modeling and experimental validation were performed. Analyzed object is a shell type sandwich channel-like structure made of composite sandwich with GFRP laminates as a skin and PET foam as a core. Several static load schemes were performed including vertical and horizontal forces. In FEM analysis multilayered laminate...
-
Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test
PublicationIn the paper behaviour of laminated sandwich beams (FRP face sheet – PET foam core – FRP face sheet) subjected to three point bending is studied. The paper aim is to find practical descriptions enabling effective and accurate estimation of the elastic response, damage and failure of the beams, basing on experiments and static calculations. Therefore a number of tests are described, that were done on laminated coupons and foam specimens...
-
Damage Analysis of Tensioning Cable Anchorage Zone of a Bridge Superstructure, Using CDP Abaqus Material Model
PublicationNumerical analysis of the tensioning cables anchorage zone of a bridge superstructure is presented in this paper. It aims to identify why severe concrete cracking occurs during the tensioning process in the vicinity of anchor heads. In order to simulate the tensioning, among others, a so-called local numerical model of a section of the bridge superstructure was created in the Abaqus Finite Element Method (FEM) environment. The...
-
Short and Long Term Measurements in Assessment of FRP Composite Footbridge Behavior
PublicationThe paper presents application of different sensors for the purpose of short and long term measurements, as well as a structural health monitoring (SHM) system to assess the behavior of a novel fiber reinforced plastics (FRP) composite footbridge. The aim is to present a thorough and concise description of these sensors networks and results gathered with their aid during in situ measurement of strains, displacements, and vibrations,...
-
Structural Health Monitoring System for Suspension Footbridge
PublicationThe article presents the structural health monitoring (SHM) system installed in a footbridge in Radom. The main reason for the need for fitting of such a system was failed acceptance tests of the bridge. While under a dynamic load consisting of a group of 12 pedestrians jumping on the bridge, the bridge developed vibration during which acceleration of the deck of up to 4.5 m/s2 was recorded. Such behavior of the footbridge causes...
-
The use of fibre-reinforced polymers (FRP) in bridges as a favourable solution for the environment
PublicationThe purpose of this article is to show the modern engineering, in which sustainability and taking care of ecology play a significant role. The authors are focused on FRP composite materials and their applications in civil engineering. Case studies showing renovation and design of new bridges with the use of FRP are presented and discussed to clarify benefits, which this solution provides. Main advantages of FRP materials in comparison...
-
Load Tests of the Movable Footbridge Over the Port Canal in Ustka
PublicationThe paper presents the acceptance tests carried out on the open footbridge over the port canal in the Port of Ustka. The steel footbridge construction is created by a single pylon to which a movable truss span is suspended with a theoretical span of 52.3 m. The studies about load test of the object included static and dynamic extortion and measurements. In static tests the ballast was of pallets with concrete blocks. Dynamic studies...
-
The effect of fishing basin construction on the behaviour of a footbrdge over the port channel
PublicationThe paper analyses possible causes of failure of the rotating footbridge over the Ustka port channel. In July, 2015, strange behaviour of this object was observed in the form of excessive vibrations of bridge platform suspension rods, with the accompanying acoustic effects. A preliminary geotechnical analysis has revealed that this destructive effect was caused by the nearby construction works, namely construction of a fishing...
-
TESTING CONTRACTION AND THERMAL EXPANSION COEFFICIENT OF CONSTRUCTION AND MOULDING POLYMER COMPOSITES
PublicationThe paper presents results of systematic tests of contraction and thermal expansion coefficients of materials based on polymer composites. The information on the above material properties is essential both at the design stage and during the use of finished products. Components for the samples were selected in such a way as to represent typical materials used for production of construction and moulding elements. The performed tests...
-
Load test of new European record holder in span length among extradosed type bridges
PublicationThe article presents acceptance load tests of a newly built extradosed MS-3 bridge located along the national road DK-16 near Ostróda (Poland). The structure features significant dimension in European reference scale. It is a new record holder in span length regarding this distinct bridge category. Its length ranges 206 m. Static and dynamic load tests were performed here. The program was extended by entire structural laser scanning...
-
Load Testing of GFRP Composite U-Shape Footbridge
PublicationThe paper presents the scope of load tests carried out on an innovative shell composite footbridge. The tested footbridge was manufactured in one production cycle and has no components made from materials other than GFRP laminates and PET foam. The load tests, performed on a 14-m long structure, were the final stage of a research program in the Fobridge project carried out in cooperation with: Gdańsk University of Technology (leader),...
-
Modern GFRP Composite Footbridges
PublicationApplication of GFRP composites in civil engineering is still not large but already noticeable. Advantages of this material, such as: low volume weight, relatively high stiffness and strength, well fatigue resistance, easiness in shaping, high material damping and high environmental resistance, make it attractive for bridge and in particular foot-bridge designers. It is estimated that nowadays in the world there are realized hundreds...
-
Influence of Actual Curing Conditions on Mechanical Properties of Concrete in Bridge Superstructures
PublicationThis article presents the research on the mechanical characteristics of concrete in the construction of three concrete bridges. A system of recording the internal temperature of concrete and automatic control of laboratory ovens was used for specimen curing. This allowed the specimens to be cured under conditions similar to those occurring in the structure. Before the construction, reference blocks were used to define similar curing...
-
TRUSS JOINT WITH POSITIVE ECCENTRICITY EXPERIMENTAL RESEARCH
PublicationDue to the technological reasons in modern lightweight steel trusses, fabricated from cold- formed sections, positive eccentricities appear in the truss nodes what induce additional forces in the truss chords. To account for the real load-carrying capacity of truss node area the steel structure research in scale 1:1 were conducted. The experiments consisted of two parts: preliminary and proper one, when conclusions from...
-
Application of foam made of post-consumer pet materials for the construction of footbridges
PublicationThe article presents the possibility of application in civil engineering of highly ecological PET foam, manufactured from 100% recycled plastic packaging. It may find uses in construction of numerous engineering structures, such as pedestrian and cycle footbridges. Properly processed waste from post-consumer PET packaging may constitute a quality structural core for use in multilayered composite materials, commonly referred to...
-
Pedestrian and bicycle bridges as examples of safe collision-free road crossings
PublicationPedestrians are most at risk when they are crossing the road. This represents a significant proportion of all fatalities among pedestrians, amounting respectively to 50% in non-built-up areas and 75% in built-up areas. The most frequent reason for this accident is failure to give way. What is most terrible is that 30% of pedestrian accidents occurred at marked pedestrian crossings. Therefore, an important part of pedestrian safety...
-
DYNAMIC RESPONSE OF FORUM GDANSK STRUCTURE DUE TO RAIL TRAFFIC
PublicationThe paper presents the study of the impact of vibration induced by the movement of the railway rolling stock on the Forum Gdańsk structure. This object is currently under construction and is located over the railway tracks in the vicinity of the Gdańsk Główny and Gdańsk Śródmieście railway stations. The analysis covers the influence of vibrations on the structure itself and on the people within. The in situ measurements on existing...
-
Load testing of a suspended footbridge in Radom (Poland)
PublicationThe footbridge in Radom is a suspended bridge of an interesting architectural form. The structure was de-signed for 4 kN/m2 of crowd loading. Dynamic calculations were not included in the design. The structure’s acceptance tests took place on the 14th of October 2016. The behaviour of the footbridge in static testing met the expectations. Unfortunately, as a result of dynamic tests, dangerous behaviour of the footbridge was revealed....
-
Assessment of tensile forces in Sopot Forest Opera membrane by in situ measurements and iterative numerical strategy for inverse problem
PublicationAssessment of tensile forces in newly build Sopot Forest Opera roofing membrane is presented. The procedure is based on in situ measurements and solution of the inverse problem by an iterative procedure. The goal of the analysis is to determine whether the stress state of the membrane is consistent with the design assumptions. The paper contains the description of measurements, used instruments, applied loadings, numerical investiga-tions...
-
Dynamic Tests and Technical Monitoring of a Novel Sandwich Footbridge
PublicationA novel sandwich composite footbridge is described in this paper, for the first time after it has been put into operation over the Radunia River in the Pruszcz Gdański municipality. This paper presents results of dynamic tests and describes technical monitoring of the footbridge. The dynamic tests were conducted to estimate pedestrian comfort and were compared with the ones from numerical simulations made in the environment of...
-
Dynamic tests of composite footbridge segment – experimental and numerical studies
PublicationExperimental dynamic tests and numerical simulations of a 3 meters long segment of a footbridge made of polymer composites are presented in the paper. The span-length is reduced, however dimensions of cross-section are the same as the target footbridge. The segment structure is made of sandwich panels, which consist of fibre reinforced polymer (GFRP) laminates (skins) and a PET foam (core). The first part of the paper contains...
-
Computational modelling of historic masonry railroad arch bridges
PublicationThe problems encountered during the analyzes of structural response of historic masonry railroad arch bridges are described in this paper. The attention is mainly focused on the stiffness of the masonry arches, their strengths and appropriate estimation of railroad load intensity. Issues related to computational modelling of two, existing, almost 130 years old masonry arch railroad bridges are presented in this context. The main...
-
Influence of an applied bearing system on behaviour of multi-span footbridge
PublicationThe cycle overpass in Gdynia is a box structure over 300 metres long, 10-span. It was opened for bicycle traffic in the second half of 2013. At the end of its construction, there was failure due to excessive horizontal displacement of the system. A number of bearings exceeded the range of permissible transverse shifts thus it was necessary to temporarily protect the spans from slipping. The FEM analysis of the original solution...
-
The validation process of truss model with joint eccentricities
PublicationNowadays, due to the technological reasons in modern lightweight steel trusses, fabricated from cold-formed sections, positive eccentricities appear in the truss nodes, to induce additional forces truss chords. In order to account for the real load-carrying capacity of truss node area the steel structure research was conducted in scale 1:1. As a result of experimental research, the forms of deformation and strains of the walls...
-
Dynamic Response of the Suspended on a Single Cable Footbridge
PublicationThe article presents numerical simulations, dynamic in situ load tests and a structural health monitoring (SHM) system installed in a suspended on a single cable footbridge. Numerical simulations performed prior to construction indicated the possibility of structural dynamics problems, finally confirmed in the course of dynamic test loading. In the dynamic load course the bridge deck developed vibrations displaying accelerations...
-
Failure characterisation of sandwich beams using integrated acoustic emission and digital image correlation techniques
PublicationThe paper presents the experimental study of the failure behaviour of sandwich beams subjected to bending. The samples examined are sandwich beams made of polyethylene terephthalate foam core and glass fibre-reinforced polymer laminate face sheets. In a series of experiments, it has been proposed to integrate diagnostic techniques with acoustic emission and digital image correlation to accurately track the cracking process on the...
-
Composite sandwich footbridge - measured dynamic response vs. FEA
PublicationThe paper describes a process of in situ dynamic tests of a composite sandwich footbridge before its accepta-tion for exploitation in real traffic conditions. It is only a part of a big research task that includes design, manufacture and introduce practical application of the bridge. The in situ measured natural modes and fre-quencies are compared with numerically determined ones. Finite element analysis is established to estimate...
-
Sensitivity analysis in design process of sandwich U-shaped composite footbridge
PublicationThe structure of the sandwich composite footbridge of a 14 metre span length and U-shaped cross-section was analysed. Sensitivity analysis was performed to support the design process of this innovative object. Linear discrete sensitivity analysis was performed by means of finite element method. The influence of vari-ation of several design variables i.e. thicknesses of inner and outer laminates on the mid-span deflection, as-sumed...
-
Ductile fracture prediction in thin metallic plates subjected to explosions
PublicationPraca dotyczy modelowania zniszczenia ciągłego. Zaprezentowano wyniki eksperymentów przeprowadzonych na płytach metalowych poddanych eksplozjom oraz wyniki jednoosiowych prób laboratoryjnych. Opisano przyjęty model prawa konstytutywnego oraz kryteriów zniszczenia. Przedstawiono identyfikację parametrów materiałowych dla przyjętego modelu. Zaprezentowano model numeryczny oraz wyniki symulacji które następnie porównano z wynikami...
-
Viscoplastic damage analysis of plate-shell structures subjected to impact loading = Lepkoplastyczna analiza zniszczenia konstrukcji płytowo-powłokowych pod wpływem obciążeń dynamicznych
PublicationW pracy przedstawiono rozważania nad analizą zachowania się konstrukcji płytowo-powłokowych pod wpływem obciążeń dynamicznych wzbudzanych przez eksplozje mieszanki gazowej. Zagadnienie to jest poddane badaniom ukierunkowanym na aspekty mechaniczne, głównie na przewidywanie ciągliwego zniszczenia. W pierwszej kolejności zaprezentowano przegląd literatury oraz opisano teorie, które w dzisiejszych czasach są najczęściej stosowane...
-
Comparison of experimental and numerical results on metallic plates subjected to explosions
PublicationA comparative study of dynamic response including damage and rupture processes of thin metallic plates subjected to shockwave impulses - explosions is presented. The results of the finite element numerical analysis are related to experiments. Due to high strain rate during explosions the elasto-viscoplastic Chaboches constitutive law including damage effects has been applied. For the assumed model proper material parameters identification...
-
Constructional properties of polycarbonate plates for EURO 2012 Gdansk stadium
PublicationPrzedstawiono wyniki badań doświadczalnych dla płyt z poliwęglanu litego, które miały zostać wykorzystane jako materiał konstrukcyjno-osłonowy stadionu piłkarskiego na mistrzostwa Euro 2012 w Gdańsku. Zidentyfikowano moduł Younga oraz Poissona, wykonano próby cykliczne oraz pełzania. Właściwości mechaniczne poliwęglanu litego oceniono jako dobre, choć obawy budzą mikrorysy pojawiające się podczas badań w strukturze materiału.
-
Historyczny żuraw na przekonstruowanym fragmencie oryginalnej estakady jako pomnik Stoczni Gdańskiej
PublicationW pracy omówiono wybrane zagadnienia z przeprowadzonych badań mających na celu ocenę możliwości pozostawienia historycznego żurawia 642-24 na estakadzie B-5 w obecnej lokalizacji po modyfikacji jej schematu statycznego. Zmiana miałaby polegać na skróceniu konstrukcji jedenastoprzęsłowej do dwóch lub jednego przęsła. W referacie zawarto: ocenę aktualnego stanu technicznego obiektu, prezentację zakresu obliczeń MES, opis przyjętych...
-
Ekspertyza techniczna oraz wielowariantowa koncepcja zabezpieczenia rotundy palmiarni w ogrodzie botanicznym w gdańsku oliwie
PublicationCelem opracowania jest określenie aktualnego stanu technicznego oraz wskazanie możliwych wariantów rozwiązań zabezpieczenia i modernizacji rotundy palmiarni w ogrodzie botanicznym w Gdańsku Oliwie. Potrzeba rozbudowy konstrukcji rotundy palmiarni wynika z wzrostu palmy daktylowej znajdującej się w obiekcie.
-
MOST IM. GEN. GROTA-ROWECKIEGO W WARSZAWIE – ANALIZY POMOSTU TECHNIKĄ ,,TREPANACJI”
PublicationW pracy przedstawione są wybrane zagadnienia związane z analizą obliczeniową modernizowanego mostu przez Wisłę im. gen Stefana Grota-Roweckiego w Warszawie. Obiekt jest stalową konstrukcją o schemacie belki ciągłej i całkowitej długości 646 m. Po przebudowie most ma być przeznaczony dla ruchu drogowego i pieszo-rowerowego o parametrach drogi ekspresowej S-8. W programie funkcjonalno–użytkowym założono znaczne poszerzenie obiektu,...
-
Experimental Tests Of Sandwich Beams In The Design Process Of GFRP Shell Footbridge Structure
PublicationThe paper includes selected aspects of the study to elaborate architectural, material and construction design of pedestrian footbridge spans made of composite materials. The considered footbridge is a sandwich-type shell structure. The cooperation of PET foam core with outer lining surfaces is crucial for its load bearing capacity. The paper is aimed to experimental investigation of sandwich beams subjected to bending loading....
-
Composite Sandwich Footbridge – Numerical ESL FEM Calculations vs. In Situ Measurements
PublicationSelected results of the static analysis of composite sandwich footbridge with the corresponding in situ measured values are compared in the paper. The analysed bridge is a research object, which was built in 2015 and is currently located at the Gdańsk University of Technology campus. Since it is a novel structure, a proper definition of the bridge numerical model, allowing its safe design, is very important. Therefore, instead...
-
Wykonanie ekspertyzy materiałowej w zakresie wytrzymałości betonu oraz składu chemicznego (chlorków) próbek betonowych dla obiektu mostowego w km 191.997 na linii kolejowej nr 7 Lublin-Dorohusk
PublicationCelem opracowania jest przeprowadzenie badań wytrzymałości na ściskanie i określenie klasy betonu wbudowanego w ustrój nośny wiaduktu, a także analiza chemiczna próbek pobranych z konstrukcji.
-
BADANIA ODBIOROWE KOMPOZYTOWEJ KŁADKI NAD KANAŁEM RADUNI W PRUSZCZU GDAŃSKIM
PublicationW pracy przedstawiono wyniki badań przeprowadzonych podczas próby obciążeniowej kładki kompozytowej GFRP w Pruszczu Gdańskim. Badania obejmowały zarówno testy statyczne, jak i dynamiczne. Uzyskane wyniki wskazują na większą niż teoretycznie oczekiwaną sztywność przestrzenną konstrukcji. Wszystkie pomierzone parametry struktury były lepsze podczas pomiarów in-situ, niż wykazały analizy numeryczne.
-
KOMPOZYTOWY MOST DLA PIESZYCH OD KONCEPCJI DO WDROŻENIA
PublicationW pracy przedstawiono historię powstania pierwszej zaprojektowanej i wykonanej przez polski zespół jednoelementowej kładki wytworzonej w całości z kompozytów polimerowych FRP. Konsorcjum realizujące projekt tworzyli: Politechnika Gdańska (lider), Wojskowa Akademia Techniczna i firma Roma Sp. z o.o. Przedsięwzięcie, któremu nadano akronim FOBRIDGE, zostało zrealizowane dzięki dofinansowaniu Narodowego Centrum Badań i Rozwoju o numerze:...
-
Wykonanie weryfikacji nośności mostów kolejowych na bocznicy GL w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś
PublicationCelem opracowania jest wykonanie weryfikacji nośności mostu kolejowego na bocznicy GL nad kanałem w rejonie ul. Zawodzie w Gdańsku oraz ustalenie maksymalnego dopuszczalnego nacisku na oś. Zakres opracowania obejmuje: • inwentaryzację konstrukcji, • ocenę stanu technicznego konstrukcji, • wykonanie symulacji obliczeniowych zachowania konstrukcji na skutek oddziaływań reprezentatywnych schematów obciążeń, • podsumowanie i wnioski.
-
Ekspertyza techniczna określająca przyczyny wystąpienia zarysowań w strefach dylatacji na ekranach zapory czołowej i bocznej zbiornika wodnego Nysa na rzece Nysa Kłodzka
PublicationCelem ekspertyzy technicznej jest określenie przyczyn wystąpienia zarysowań i pęknięć przy dylatacjach płyt żelbetowych, tworzących ekran zapory czołowej i bocznej zbiornika wodnego Nysa oraz prezentacja koncepcji naprawy.
-
Nadzór naukowy związany z realizacja zadania inwestycyjnego pn. ,,Wiadukt Biskupia Górka w Gdańsku". Audyt projektu zamiennego
PublicationCelem opracowania jest weryfikacja dokumentacji projektowej zadania inwestycyjnego pn. ,,Wiadukt Biskupia Górka w Gdańsku". Zakres opracowania obejmuje: • ogólny przegląd dokumentacji poszczególnych obiektów inżynierskich; • analizę statyczno–wytrzymałościową estakady dojazdowej w jezdni prawej; • analizę statyczno – wytrzymałościową oraz globalnej stateczności wiaduktu łukowego nad torami kolejowymi; • analizę geotechniczną przyjętych...
-
OPINIA TECHNICZNA nr 6/PG/mosty Sprawowanie nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską” Analiza konstrukcji mostów nad śluzą po modyfikacji detalu przeciwwagi w wyniku uwag NN przedstawionych w opinii nr 5/PG/mosty.
PublicationOpinię przygotowano w ramach prowadzonego nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską”.
seen 1772 times