displaying 1000 best results Help
Search results for: VIBRATION ELEIMINATOR OPERATING
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K03
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K04
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K01
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
Measurements of the coefficients of current distribution between two generators operating in parallel in a ship power station
Open Research DataThe presented dataset is part of research focusing on the assessment of metrological properties of the instrument, Estimator/Analyzer (E/A v.2), developed and made at the Faculty of Electrical Engineering, Department of Marine Electrical Power Engineering of Gdynia Maritime University. The attached dataset contains processed data, expressing the coefficients...
-
Effect of operating conditions on N 2 O production in an anammox sequencing batch reactor containing granular sludge
PublicationNitrous oxide (N2O) is one of the gases with the greatest impact in the atmosphere due to its persistence and significant contribution to the greenhouse effect. This study provides an insight into the dynamics of N2O production in wastewater nitrogen removal systems. A 10 L sequencing batch reactor containing enriched anammox biomass was subjected to different operational conditions, i.e., temperature, feed time, NO2 /NH4 þ ratio...
-
A Method of Fast and Simultaneous Calibration of Many Mobile FMCW Radars Operating in a Network Anti-Drone System
PublicationA market for small drones is developing very fast. They are used for leisure activities and exploited in commercial applications. However, there is a growing concern for accidental or even criminal misuses of these platforms. Dangerous incidents with drones are appearing more often, and have caused many institutions to start thinking about anti-drone solutions. There are many cases when building stationary systems seems to be aimless...
-
The Concept of a Methodology for Selecting the Optimal Parameters of Heat Received from a Nuclear Power Plant Operating in a Partial Cogeneration Mode
PublicationThe paper presents the concept of the objective function which is to allow the selection of optimal parameters of the district heating system using a nuclear power plant operating in partial cogeneration mode. The concept is based on research carried out a number of years ago. The size of annual expenses was proposed as the objective function, which allows to compare the operation of a nuclear power plant in partial cogeneration...
-
Vibration Diagnostics of Rolling Mills Based on Nonlinear Effects in Dynamics
Publication -
Prediction of the Results of Chatter Vibration Surveillance by the Spindle Speed Control
PublicationDrgania samowzbudne typu chatter są istotnym zjawiskiem występującym podczas obróbki szybkościowej (HSM) z użyciem smukłych narzędzi. Zastosowanie optymlano-liniowego sterowania prędkością obrotową narzędzia w celu nadzorowania drgań pozwoliło zredukowac te drgania. W artykule przedstawiono sposób predykcji rezultatów nadzorowania z użyciem dwóch różnch modeli dynamiki skrawania zastosowanych w symulacjach komputerowych.
-
Chatter vibration surveillance by the optimal-linear spindle speed control
PublicationArtykuł dotyczy drgań samowzbudnych typu chatter podczas obróbki szybkościwowej frezami kulistymi. Opisano w nim niestacjonarny model procesu skrawania oraz przeprowadzono analizy dynamiki układu z opóźniającym sprzężeniem zwrotnym. W celu zredukowania drgań zaproponowano zmiany prędkości obrotowej wrzeciona. Przedstawiono także procedurę nadzorowaia drgań z wykorzystaniem opisanej metody. Dla wybranych przypadków, w artykule przedstawiono...
-
A Mechatronic Procedure of Vibration Surveillance During Milling of a Flexible Workpiece
PublicationArtykuł prezentuje mechatroniczne podejście do nadzorowania drgań podczas obróbki szybkościowej przedmiotów podatnych z wykorzystaniem aktywnego sterowania optymalnego. Układ sterowania składa się z aktywych wzbudników piezoelektrycznych przymocowanych do przedmiotu. Efektywnośc metody została potwierdzona symulacjami komputerowymi i badaniami eksperymentalnymi.
-
Simulation of surveilance of industrial robot's vibration with a use of the modal control
PublicationW pracy rozważano drgania niestacjonarnego układu nośnego robota IRb-6. Do nadzorowania drgań zastosowano algorytm sterowania modalnego przy energetycznym wskaźniku jakości. Celem proponowanego algorytmu jest minimalizacja poziomu drgań uchwytu manipulatora, a tym samym - zwiększenie możliwości nowoczesnych linii zrobotyzowanych, jak również poprawa dokładności i powtarzalności pozycjonowania robotów.
-
Damage detection in turbine wind blades by vibration based methods
PublicationThe paper describes results of numerical simulation for damage localization in the composite coat of a wind turbine blade usingmodal parameters and a modern damage detection method (wavelet transform).
-
Material independent effectiveness of workpiece vibration in μ-EDM drilling
Publication -
Theoretical and numerical analysis of free vibration of liquid-filled tanks
PublicationW pracy rozpatrywano drgania giętne belki o stałym przekroju prostokątnym wypełnionej cieczą idealną. Częstości drgań własnych i formy drgań belki wyznacza się z nieskończonych układów równań algebraicznych (30) i (54). Rozwiązania przedstawiono na wykresach.
-
The spindle speed control for high speed milling vibration surveillance
PublicationW pracy przedstawiono zmodyfikowaną metodę nadzorowania drgań za pomocą sterowania optymalno-liniowego prędkością obrotową wrzeciona. Zamieszczono opis dynamiki skrawania, niestacjonarnego modelu obliczeniowego oraz metody nadzorowania drgań. Wykorzystano model modalny wirującego narzędzia, którego parametry wyznaczono zarówno metodami symulacji komputerowych, jak i - za pomocą eksperymentalnej analizy modalnej. Zamieszczono przykład...
-
The spindle speed optimal control as a mean of chatter vibration surveillance
PublicationNowa metoda nadzorowania drgań wirujących narzędzi w nowoczesnych frezarkach polega na wykorzystaniu sterowania optymalnego w układach niestacjonarnych przy energetycznym wskaźniku jakości. W rezultacie, sygnałem sterującym jest chwilowa zmiana prędkości obrotowej wrzeciona. Rozważano frezowanie czołowe smukłym frezem trzpieniowym. Wyniki symulacji komputerowych potwierdziły praktyczne uzasadnienie proponowanej metody. Drgania...
-
The programmed spindle speed control to reduce the level of the chatter vibration
PublicationOpracowano strategię nadzorowania drgań ''chatter'' za pomocą programowego sterowania prędkością obrotową wrzeciona obrabiarki. Skuteczność tej strate-gii jest obserwowana w czasie całego procesu obróbkowego. Ponadto zastosowa-nie jej wymaga poniesienia tylko niewielkich nakładów finansowych, gdyż nie są konieczne zmiany w układzie napędowym i sterowania CNC.
-
Free torsional vibration sensitivity analysis of thin walled beams.
PublicationW pracy przedstawiono analizę wrażliwości swobodnych drgań skrętnych bisymetrycznej , cienkościennej belki o otwartym przekroju poprzecznym, poddanej działaniu siły osiowej
-
Vibration surveillance in modern milling machines by the spindle speed control.
PublicationPraca poświęcona jest nadzorowaniu drgań wirujących narzędzi w nowo-czesnych frezarkach. Polega ono na zastosowaniu sterowania programo-wego w układach niestacjonarnych. Dotyczy to zamkniętych układów obra-biarek, kiedy to istotną rolę odgrywają drgania samowzbudne typu chat-ter. Sygnałem sterującym jest chwilowa zmiana prędkości obrotowej. Rozważano frezowanie czołowe smukłym frezem trzpieniowym na pionowym centrum frezarskim....
-
Tool-workpiece vibration surveillance during slender end milling.
PublicationPraca poświęcona jest nowemu podejściu do nadzorowania drgań wirujących narzędzi we współczesnych frezarkach. Polega ono na sterowaniu programowym w układach niestacjonarnych. Dotyczy zamkniętych układów obrabiarek, kiedy to istotną rolę odgrywają drgania samowzbudne typu chatter. Sygnałem sterującym jest chwilowa zmiana prędkości obrotowej wrzeciona. Rozważano frezowanie czołowe smukłym frezem trzpieniowym na pionowym centrum...
-
Spatiotemporal random field models in vibration-based diagnosis of structures.
PublicationW pracy przedstawiono nowe podejscie do diagnostyki dynamicznejkonstrukcji w zakresie modelowania stochastycznego.Glownymzalozeniem jest losowosc parametrow konstrukcji(wlasnoscimaterialowe,geometryczne i warunki brzegowe}.Wlasnosci te samodelowane jako czasoprzestrzenne pola losowe drugiego rzedu.Zdefiniowano stochastyczne indeksy uszkodzenia konstrukcji.
-
Real Time Operating Systems - Lecture & exercises 2021/22L
e-Learning CoursesSupporting course for RTOS seminr classes.
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - PARAFFIN OIL. Specim. set K08
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: PARAFFIN OIL. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K02
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K06
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K07
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
Steady-State Vibration Level Measurement of the Five-Phase Induction Machine during Third Harmonic Injection or Open-Phase Faults
PublicationMultiphase electric machines are increasingly used in various industries and for electromobility. Complex systems have been developed for the control and powering of multiphase machines, which require verification. The quality of control and the power supply of electric machines is usually evaluated by analyzing various electrical parameters. On the other hand, taking into account the fact that a motor is an electrical-mechanical...
-
Derivation of motor mean phase currents in PMSM drives operating with low switching-to-fundamental frequency ratio
PublicationPulse width modulation (PWM) of inverter output voltage causes the waveforms of motor phase cur-rents to consist of distinctive ripples. In order to provide suitable feedback for the motor current con-trollers, the mean value must be extracted from the currents’ waveforms in every PWM cycle. A com-mon solution to derive the mean phase currents is to sample their value at the midpoint of a symmetrical PWM cycle. Using an assumption...
-
Multi-stage magnetic-fluid seals for operating in water - life test procedure, test stand and research results
PublicationThe edge criteria for magnetic-fluid seals durability research are critical for the seal'stechnological usefulness. The magnetic fluid seal technology in water is much moredifficult technological problem in comparison to gas or vacuum environment. There isalways problem with immediate contact between magnetic fluid and the environmentaluninspected liquids. In the paper are presented ways of experiments definitions carried outwith...
-
Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines. Part III. Diagnostic and operating tolerances
PublicationThe third part of the article presents a method for detecting failures of the automatic engine control system with the aid of an exhaust gas temperature setter, specially designed and machined for this purpose. It also presents a procedure of identifying the operating tolerances and determining the diagnostic tolerances for the exhaust gas temperature recorded in the naval turbine engine during the start-up and acceleration processes....
-
Prediction of CO2 emissions of a car using the discrete map of the operating conditions
PublicationW pracy przedstawiono propozycję opisu warunków eksploatacji pojazdów w wybranej aglomeracji miejskiej z użyciem dyskretnej mapy warunków eksploatacji. Mapa taka umożliwia prognozowanie wybranych parametrów eksploatacyjnych pojazdów dla przyjętych dróg przejazdu oraz różnych jednostek napędowych. Głównymi parametrami wyznaczanymi z użyciem dyskretnej mapy warunków eksploatacji są: całkowita energia przeznaczana do napędu wybranego...
-
Design analysis of Tesla micro-turbine operating on a low-boiling medium
PublicationThis paper presents results of the design analysis of a Tesla bladeless turbine intended for a co-generating micro-power plantof heat capacity 20 kW, which operates in an organic Rankine cycle on a low-boiling medium. Numerical calculations of flowin several Tesla turbine models were performed for a range of design parameters. Results of investigations exhibit interestingfeatures in the distribution of flow parameters within the...
-
Identification and non-integer order modelling of synchronous machines operating as generator
PublicationThis paper presents an original mathematical model of a synchronous generator using derivatives of fractional order. In contrast to classical models composed of a large number of R-L ladders, it comprises half-order impedances, which enable the accurate description of the electromagnetic induction phenomena in a wide frequency range, while minimizing the order and number of model parameters. The proposed model takes into account...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - PARAFFIN OIL. Specim. set K09A - full-run
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: PARAFFIN OIL. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - PARAFFIN OIL. Specim. set K09 - pre-run
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: PARAFFIN OIL. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30,...
-
International Journal of Vehicle Noise and Vibration
Journals -
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME
Journals -
Nonlocal Vibration of Carbon/Boron-Nitride Nano-hetero-structure in Thermal and Magnetic Fields by means of Nonlinear Finite Element Method
PublicationHybrid nanotubes composed of carbon and boron-nitride nanotubes have manifested as innovative building blocks to exploit the exceptional features of both structures simultaneously. On the other hand, by mixing with other types of materials, the fabrication of relatively large nanotubes would be feasible in the case of macroscale applications. In the current article, a nonlinear finite element formulation is employed to deal with...
-
Vibration surveilance during milling of flexible details with a use of the optimal control
PublicationPraca dotyczy nadzorowania drgań podczas często obserwowanego w przypadku nowoczesnych procesów obróbkowych frezowania przedmiotów podatnych smukłymi narzędziami. Sformułowano: macierzowe równanie dynamiki, energetyczny wskaźnik jakości i optymalny sygnał sterujący we współrzędnych hybrydowych. Przeprowadzono symulacje komputerowe procesu frezowania dla różnych parametrów modelu obliczeniowego i rożnych ścieżek narzędzia. Zaproponowano...
-
Vibration surveillance supported by Hardware-In-the-Loop Simulation in milling flexible workpieces
PublicationW artykule przedstawiono nowoczesne podejście do problemu minimalizacji poziomu drgań podczas frezowania szybkościowego elementów podatnych. Do analizy dynamicznej procesu skrawania zastosowano niestacjonarny model opisany we współrzędnych hybrydowych. Na tej podstawie, przy wykorzystaniu energetycznego wskaźnika jakości wyprowadzono opis sygnału sterującego. Sygnał ten jest następnie stosowany do aktywnej redukcji drgań przedmiotu...
-
Some mechatronic solutions for vibration surveillance of mechanical systems idealised discretely
PublicationCelem pracy jest prezentacja wybranych rozwiązań mechatronicznych, których uwzględnienie może poprawić skuteczność procesu nadzorowania drgań modelowanych dyskretnie układów mechanicznych. Proponowane rozwiązania dotyczą sterowania optymalnego przy energetycznym wskaźniku jakości w układzie zredukowanym oraz w układzie hybrydowym, jak również - dopasowania prędkości obrotowej wirujących wałów do optymalnego kąta przesunięcia fazowego....
-
A mechatronic design based on desired solutions for vibration surveillance of mechanical systems
PublicationCelem pracy jest pokazanie zamierzonych rozwiązań, których włączenie może stanowić bazę nowych projektów mechatronicznych. Rozwiązania te dotyczą zmodyfikowanej metody nadzorowania drgań za pomocą sterowania modalnego przy energetycznym wskaźniku jakości, nadzorowania drgań za pomocą zmiennej prędkości obrotowej wrzeciona, a także - dopasowania prędkości obrotowej do optymalnego kąta przesunięcia fazowego. Uzyskane rezultaty oraz...
-
Dental Condition as A Factor Modifying the Transmission of the Sound Vibration in the Skull Bones
Publication -
Frequency domain vibration surveillance of industrial robots using modal control
PublicationRozważano drgania niestacjonarnego układu nośnego robota IRb-6 . Do nadzorowania drgań wykorzystano algorytm sterowania modalnego przy energetycznym wskaźniku jakości w dziedzinie częstotliwości. Celem proponowanego algorytmu jest minimalizacja amplitudy drgań końcówek manipulacyjnych (efektorów), a w rezultacie - zwiększenie wydajności linii zrobotyzowanych, poprawa dokładności i powtarzalności pozycjonowania robota.
-
Vibration surveillance during milling of flexible details with a use of the optimal control
PublicationPraca dotyczy nadzorowania drgań podczas obróbki frezem kulistym zakrzywionych przedmiotów podatnych. Utworzono model hybrydowy niestacjonarnego układu drgającego i wydzielono podukłady: strukturalny, modalny oraz łączący. Istotnym zadaniem było utworzenie modelu przedmiotu podatnego w konwencji metody elementów skończonych oraz uzyskanie dobrej zgodności modelu z wynikami eksperymentalnej analizy modalnej obiektu rzeczywistego.
-
Damage detection in beams using wavelet transform on higher vibration modes
PublicationNiniejsza praca poświęcona jest technice diagnostyki konstrukcji bazującej na transformacie falkowej. Badany obiekt to belka wspornikowa z uszkodzeniami w formie nacięcia o głębokości 20%, 10% oraz 5% wysokości belki. Pomiary postaci drgań wykonano za pomocą nowoczesnego wibrometru laserowego. Celem pracy jest przedstawienie eksperymentalnych i numerycznych analiz wpływu wyższych postaci drgań na efektywność wykrywania uszkodzeń...
-
Free vibration analysis of thin-walled frames with use of node superelements
PublicationW pracy proponuje się model ramy cienkościennej zbudowany z prętów cienkościennych i superelementów węzłowych do analizy dragń swobodnych. Dzięki temu modelowi istnieje możliwość uwzględnienia wpływu deformacji węzłów na częstości i postacie drgań własnych. Porównanie wyników analizy numerycznej z rezultatami opatymi na modelu jednowymiarowym, belkowym i modelu podziału ramy na dwuwymiarowe elemnty skończone wskazuje na poprawność...
-
Stabilization of the titanium vibration damping wires in the steam turbine blades system
PublicationPrzedstawiono metody stabilizacji drutów tłumiących w systemie łopatkowym turbin parowych. Na podstawie badań eksperymentalnych mikrostruktury i własności mechanicznych wykazano przydatność metody stabilizacji na gorąco drutów tłumiących wykonywanych ze stopu tytanu WT3-1.
-
Vibration-Based Investigation of a Historic Bell Tower to Understand the Occurrence of Damage
PublicationABSTRACT The paper presents a survey of the historic Arch-cathedral bell tower in Vilnius induced by the appearance of cracks in the structure after a new bell system installation. An attempt is undertaken to identify the reason for the crack occurrence and to check a possible crack influence on global structural behaviour. The research is based on dynamic measurements made in the tower during ambient vibrations and during vibrations...