Filters
total: 1071
displaying 1000 best results Help
Search results for: OPTICAL ACTIVITY
-
Optical properties of boron-doped nanocrystalline diamond films studied by spectroscopic ellipsometry
PublicationThe optical properties of boron-doped nanocrystalline diamond films, coated using Microwave Plasma Enhanced Chemical Vapour Deposition (μPE CVD) system, were analyzed by spectroscopic ellipsometry. Diamond films were deposited on silicon substrates. The ellipsometry data (refractive index (n(λ)), extinction coefficient (k(λ)) were modeled using dedicated software. Evolution of the optical structure with boron doping was observed...
-
Structural and optical investigations of sol-gel derived lithium titanate thin films
Publicationin this paper structural and optical studies of lithium titanate (lto) thin films are presented. nanocrystalline thin films with 800 nm thickness were prepared by sol-gel method. to examine the influence of the annealing time on as-prepared films crystallization, the coatings were heated at 550 °c for 10, 20 and 80 h. structure of manufactured thin films was investigated using x-ray diffraction (xrd). the most visible lithium titanate...
-
Comment on "Quantitative comparison of analysis methods for spectroscopic optical coherence tomography"
PublicationIn a recent paper by Bosschaart et al. [Biomed. Opt. Express 4, 2570 (2013)] various algorithms of time-frequency signal analysis have been tested for their performance in blood analysis with spectroscopic optical coherence tomography sOCT). The measurement of hemoglobin concentration and oxygen saturation based on blood absorption spectra have been considered. Short time Fourier transform (STFT) was found as the best method for...
-
Investigation of H2:CH4 plasma composition by means of spatially resolved optical spectroscopy
PublicationThe system based on spatially resolved optical emission spectroscopy dedicated for in situ diagnostics of plasma assisted CVD processes is presented in this paper. Measurement system coupled with chemical vapour deposition chamber by dedicated fiber-optic paths enables investigation of spatial distribution of species densities (Hx, H+, CH, CH+) during chemical vapour deposition process. Experiments were performed for a various...
-
Planning a Cost-Effective Delay-Constrained Passive Optical Network for 5G Fronthaul
PublicationWith the rapid growth in the telecommunications industry moving towards 5G and beyond (5GB) and the emergence of data-hungry and time-sensitive applications, Mobile Network Operators (MNOs) are faced with a considerable challenge to keep up with these new demands. Cloud radio access network (CRAN) has emerged as a cost-effective architecture that improves 5GB performance. The fronthaul segment of the CRAN necessitates a high-capacity...
-
MONTE CARLO MODELING OF OPTICAL SENSOR FOR POST-OPERATIVE FREE FLAP MONITORING
PublicationAfter a preliminary study of the currently employed methods in vitality monitoring of the tissue flaps (TRAM, DIEP, SIEA), a usefulness of optical techniques is discussed. It seems that one of the most promising in monitoring tissue flaps blood flow is a near infrared spectrometry (NIRS). However, a special design of a measurement sensor has to be developed. First, basing on the literature study an optical “window” is characterized....
-
Magnetoelectric, spectroscopic, optical and elastic properties of Co-doped BaTiO3 ceramics
Publicationhe BaTiO3 perovskite is widely used in the electronic technology due to its dielectric, piezoelectric and ferroelectric properties and is a well-known base for obtaining a promising multifunctional material. In this paper we report the extensive studies on the Co-doped BaTiO3 ceramics for the wide range cobalt content. Full structural characterization of studied samples in a 20–450 K range was provided. The results of research...
-
Joint optimization of anycast and unicast flows in survivable optical networks
PublicationZnane z literatury dotychczasowe prace związane z ochroną ruchu przed awarią elementów sieci dotyczą transmisji typu unicast (jeden-do-jednego). Niniejszy artykuł jest pierwszym prezentującym rozwiązanie jednoczesnej ochrony transmisji anycast (jeden-do-jednego-z-wielu) oraz transmisji unicast. Proponowane podejście wykorzystuje model ochrony ścieżki (ang. path protection). Zagadnienie zostało sformułowane w postaci odpowiedniego...
-
Liveness measurements using optical flow for biometric person authentication
PublicationAutomatyczne rozpoznawanie twarzy jest jedną z najpopularniejszych technik biometrycznych, jednak nawet najdokładniejsze algorytmy identyfikacji okażą się bezużyteczne, jeśli będzie można je oszukać, np. używając zdjęcia zamiast rzeczywistej osoby. Dlatego też odpowiedni pomiar żywotności jest niezwykle istotny. W pracy zaprezentowano metodę, która jest w stanie rozróżnić pomiędzy sekwencjami wideo pokazującymi żywe osoby oraz...
-
Selective Protection for All-Optical Physical Impairment Constrained Routing
PublicationW przypadku sieci optycznych, zauważalna jest obecnie tendencja dążenia do transmisji całowicie optycznej (tz. bez konwersji O/E/O w węzłach tranzytowych). Jednakże w niedalekiej przyszłości, z uwagi na techniczne ograniczenia, niemożliwa będzie obsługa całości ruchu wyłącznie w dziedzinie optycznej. Operatorzy będą więc zainteresowani oferowaniem rozwiązań przejściowych implikujących przełączanie w dziedzinie optycznej jedynie...
-
Mode interaction in few-mode optical fibres with Kerr effect
PublicationUogólnioną metodę rzutowania do ortogonalnej bazy funkcji poprzecznej współrzędnej Bessela stosuje się do wyprowadzania układów równań nieliniowych Schrodingera. Teoria jest ważna dla paczek falowych w światłowodach i kilku modelach.
-
Polarization sensitive optical coherence tomography for technical materials investigation
PublicationZaprezentowano system optycznej tomografii koherentnej z analizą stanu polaryzacji światła. System umożliwia nieniszczące i bezkontaktowe badanie wewnętrznej struktury materiałów warstwowych. Przedstawiono zastosowaną metodę analizy stanu polaryzacji promieniowana wstecznie rozproszonego od badanego obiektu.
-
Poll Reader - the working prototype of optical mark recognition software
PublicationAutomatyczne rozpoznawanie zaznaczeń wydaje się stosunkowo prostym zadaniem z dziedziny przetwarzania dokumentów, a komercyjne systemy OMR są dostępne na rynku już od dłuższego czasu. Zdecydowaliśmy się jednak na stworzenie prostego darmowego oprogramowania, które mogłoby być wykorzystywane przez uczelnie zobowiązane do przeprowadzania ankiet wśród studentów. W rozdziale opisano konstrukcję programu oraz najważniejsze algorytmy...
-
Cationic porphyrazines with morpholinoethyl substituents – Syntheses, optical properties, and photocytotoxicities
Publication -
Polarization Conversion of Solitons Propagating in Birefringent Microstructured Optical Fibers
Publication -
Numerical modelling of conical wave formation in multimode optical fibers
Publication -
Observation of second-order meron polarization textures in optical microcavities
Publication -
Reference LED source of subnanosecond pulses of broadband optical radiation
Publication -
<title>Basic properties of ring-index optical fibers</title>
Publication -
Optical fibers and photonics applications: topical tracks at Wilga Conferences
Publication -
Hybrid Integrated Components For Optical Fiber Communication And Instrumentation Systems
Publication -
Technological Sensitizing Of Mosaic Optical Fibres For Sensory And Microoptics Applications
Publication -
<title>Apparatus to search for optical flashes of astronomical origin</title>
Publication -
<title>Technology of soft-glass optical fiber capillaries</title>
Publication -
Research Toward The Optical Equipment For An Autonomous Robot For TviV Environment
Publication -
Thermal and optical properties of PMMA films reinforced with Nb2O5 nanoparticles
Publication -
The Investigation of Thermal and Optical Properties of Semiconducting Nanostructural Hybrid Films
Publication -
Optical properties of phenylene–thiophene-based polyazomethine thin films
Publication -
Polarization sensitive optical coherence tomography for technical materials investigation
Publication -
<title>Synthesized light source for optical coherence tomograph</title>
Publication -
Optical time of flight spectroscopy for highly scattering materials measurements.
PublicationW artykule omówiono możliwości wykorzystania optycznej spektroskopii czasu przelotu w wyznaczaniu podstawowych parametrów optycznych materiałów silnie rozpraszających światło. Wykorzystano tu metodę Monte Carlo i metodę dyfuzji.
-
Optical excitation methods in active dynamic thermography in medical diagnostics.
PublicationArtykuł zawiera opis metod pobudzania cieplnego badanych obszarów ciała ludzkiego w technice aktywnej termografii dynamicznej. Jako źródła pobudzenia cieplnego mogą być stosowane lampy podczerwieni, lampy halogenowe dużej mocy, a także lasery. W artykule opisano również algorytmy obliczeń obrazów parametrycznych.
-
Optical measurements for thin oil film investigation in rheometric processes.
PublicationPrzedmiotem badań jest pomiar parametrów cienkiej warstwy oleju silikonowego AK106, powstającej na ścianach dyszy w trakcie procesu reologicznego wyciskania do form past ceramicznych, przygotowywanych ze sproszkowanego tlenków wodorotlenków AlOOH oraz oleju AK106. Parametrami badanymi były: grubość warstwy oleju, charakterystyka reflektancyjna pasty oraz skład mieszaniny. Przedstawione zagadnienie ma istotne znaczenie dla rozwoju...
-
Optical monitoring of thin oil film thickness in extrusion processes
PublicationPraca porusza problem pomiaru grubości cienkiej warstwy przyściennej -oleju, podczas procesu wyciskania ceramiki modelowej. Szczegółowo opisuje zjawiska fizyczne zachodzące w warstwie przyściennej oraz dynamiczne parametry wykorzystywane do oceny grubości. Autorzy opisują także metodę pomiaru oraz konstrukcję układów pomiarowych.
-
Influence of sensor design and optical properties of tissue on the photoplethysmographic signal
PublicationPhotopletysmography and an associated technique called pulse oximetry are still explored due to the expectations that they give a lot of information about the state of the patient and, also, due to the fact that they are non invasive. Knowledge about the impact of various parameters on the measured signal leads to a faster and a more reliable way of analyzing measurement results and finding the dependencies between the involved...
-
Impact of Selected Operating Conditions on the Optical Properties of Polymer Shields
Publication -
Second- and Third-Order Nonlinear Optical Response of Perovskite LiTaO3
Publication -
Laser operated nonlinear optical studies of BiFe0,9Cr0,1O3 and BiFe0,9Al0,1O3 multiferroics
Publication -
Efficient finite difference analysis of microstructured optical fibers [on line]
PublicationW pracy przedstawiono nową technikę numerycznej analizy mikrostruktur światłowodowych. Technika ta polega na połączeniu metody różnic skończonych i dyskretnych rozwinięć funkcyjnych. Pozwala to na zmniejszenie rozmiaru macierzy powstających przy analizie problemu, a jednocześnie na bezpośrednią implementację radiacyjnych warunków brzegowych. Testy algorytmu przeprowadzono dla kilku wybranych struktur, uzyskując bardzo dobrą zgodność...
-
New aspects of the use of Optical Theorem in the analysis of microcavity lasers
Publication -
Modeling of broadband light source to use with optical coherenttomography system
PublicationW pracy przedstawiono modelowanie źródeł szerokopasmowych na potrzeby systemów koherentnej tomografii optycznej z punktu widzenia uzyskiwanej zdolności podłużnej i jakości otrzymywanych obrazów. Pokazano na przykładzie źródła szerokopasmowego wykorzystującego światłowód fotoniczny do generacji w wyniku zjawisk nieliniowych ''supercontinuum'' wpływ kształtowania wiązki na możliwości pomiarowe systemu OCT.
-
Applying of the optical time-of-flight spectroscopy for the paper and pulp characterization
PublicationW pracy przedstawiono korzyści wykorzystania optycznej spektroskopii czasu przelotu w badaniach papieru i miazgi drzewnej. Przedmiotem badań były różne gatunki papieru oraz miazgi drzewnej (bez obróbki cieplnej, po obróbce cieplnej lub po obróbce chemicznej). W pomiarach wykorzystano półprzewodnikowe lasery impulsowe oraz w charakterze fotoodbiorników kamerę smugową lub licznik fotonów.
-
Studies on optical transmittance of boron-doped nanocrystalline diamond films
PublicationThickness is one of the most important parameters in many applications using thin layers. This article describes thickness determination of a boron-doped nanocrystalline diamond (NCD) grown on fused silica glass. A spectroscopic measurement system has been used. A high refractive index (2.3 at 550nm) was achieved for NCD films. The thickness of NCD samples has been determined from the transmission spectrum.
-
Measurements of the optical and thermal properties of the 2D black phosphorus coating
PublicationBlack phosphorus is a 2D material, which properties are still being discovered. In this paper, the sensitivity to the temperature of a few-layer black phosphorus coating deposited, on the surface of a microsphere-based fiber-optic sensor, by a dip-coating method is presented. The coating was investigated after 2, 3, and 5 deposition cycles and during temperature growth from 50 °C to 300 °C in an interferometric setup. The intensity...
-
Optical Magnetometry Based on Nanodiamonds with Nitrogen-Vacancy Color Centers
PublicationNitrogen-vacancy color centers in diamond are a very promising medium for many sensing applications such as magnetometry and thermometry. In this work, we study nanodiamonds deposited from a suspension onto glass substrates. Fluorescence and optically detected magnetic resonance spectra recorded with the dried-out nanodiamond ensembles are presented and a suitable scheme for tracking the magnetic-field value using a continuous...
-
Design of Cost-Efficient Optical Fronthaul for 5G/6G Networks: An Optimization Perspective
PublicationCurrently, 5G and the forthcoming 6G mobile communication systems are the most promising cellular generations expected to beat the growing hunger for bandwidth and enable the fully connected world presented by the Internet of Everything (IoE). The cloud radio access network (CRAN) has been proposed as a promising architecture for meeting the needs and goals of 5G/6G (5G and beyond) networks. Nevertheless, the provisioning of cost-efficient...
-
Nonlinearity shaping in nanostructured glass-diamond hybrid materials for optical fiber preforms
PublicationNanodiamond integration with optical fibers has proved a compelling methodology for magneto-optics. We reveal that the applicability of nanodiamonds in nonlinear optics goes beyond the previous demonstrations of frequency converters. Instead, we exploit the recently reported volumetric integration of nanodiamonds along the optical fiber core and show that the nonlinear response of glasses can be manipulated by nanodiamonds. By...
-
Optical properties of thin TiO2 film deposited on the fiber optic sensor head
PublicationThe presented study was focused on investigation of the titanium dioxide (TiO2) thin film deposited on the fiber tip. The intention of this investigation was using TiO2 film in the construction of the optical fiber sensor head. In the demonstrated construction TiO2 thin layer was deposited on the tip of a commonly used telecommunication single mode optical fiber (SMF-28) by means of the Atomic Layer Deposition (ALD). Thickness...
-
Effect of pH on optical sensing with poly-L-lysine-modified nanodiamonds
PublicationNitrogen-vacancy (NV) centers are crystallographic defects which provide diamonds with unique physical properties. The centers are known for their intensive, time-stable fluorescence, and an electron spin, which exhibits long coherence time and may be manipulated using external stimuli. Nanodiamonds containing the NV centers are promising tools in biolabeling, biosensing, and drug delivery due to the aforementioned properties of...
-
An Optical Low-Coherence System for 2-Dimensional Visualization of Thin Polymer Layers
PublicationW artykule omówiono zasadę działania i przedstawiono podstawowe właściwości systemu OCT (Optical Coherence Tomography). Na przykładzie folii polietylenowej przedyskutowano możliwości wykorzystania systemu do badanie wewnętrznej struktury warstwowej obiektów niebiologicznych. Przedstawiono i omówiono wyniki przeprowadzonych badań nad warstwowymi materiałami przeźroczystymi.