Filters
total: 425
filtered: 237
Search results for: ACTIVE NOISE AND VIBRATION CONTROL
-
A new approach to active noise and vibration control - [Part I: the known frequency case]
PublicationThis paper presents a new approach to rejection of complex-valued sinusoidal disturbances acting at the output of a discrete-time stable linear plant with unknown dynamics. It is assumed that the frequency of the sinusoidal disturbance is known, and that the output signal is contaminated with wideband measurement noise. The disturbance rejection control rule is first derived and analyzed for a nominal plant model, different from...
-
A new approach to active noise and vibration control - [Part II: unknown frequency case]
PublicationThis paper presents a new approach to rejection of complex-valued sinusoidal disturbances acting at the output of a discrete-time stable linear plant with unknown and possibly timevarying dynamics. It is assumed that both the instantaneous frequency of the sinusoidal disturbance and its amplitude may be slowly varying with time and that the output signal is contaminated with wideband measurement noise. It is not assumed that a...
-
Active feedback noise control in the presence of impulsive disturbances
PublicationThe problem of active feedback control of a narrowband acoustic noise in the presence of impulsive disturbances is considered. It is shown that, when integrated with appropriately designed outlier detector, the proposed earlier feedback control algorithm called SONIC is capable of isolating and rejecting noise pulses. According to our tests this guarantees stable and reliable operation of the closed-loop noise cancelling...
-
Robust algorithm for active feedback control of narrowband noise
PublicationThe problem of active control of narrowband acoustic noise is considered. It is shown that the proposed earlier feedback control algorithm called SONIC (self-optimizing narrowband interference canceller), based on minimization of the L2-norm performance measure, can be re-derived using the L1 approach. The resulting robust SONIC algorithm is more robust to heavy-tailed measurement noise, such as the αlpha-stable noise, than the...
-
Semi-adaptive feedback active control of MRI noise
PublicationA feedback controller is proposed for cancellation of magnetic resonance imaging (MRI) noise. The design of the controller takes into account specific features of the MRI noise signal. Simulation results show that a considerable rejection rate of the MRI noise can be obtained.
-
Multichannel self-optimizing active noise control scheme
PublicationThe problem of cancellation of a nonstationary sinusoidal interference, acting at the output of an unknown multivariable linear stable plant, is considered. The proposed cancellation scheme is a nontrivial extension of the SONIC (self-optimizing narrowband interference canceller) algorithm, developed earlier for single-input, single-output plants. In the important benchmark case - for disturbances with randomwalk-type amplitude...
-
Multiple-channel frequency-adaptive active vibration control using SONIC
PublicationSONIC (self-optimizing narrowband interference canceller) is an acronym of a new approach to rejection of sinusoidal disturbances acting at the output of a discretetime stable linear plant with unknown and possibly timevarying dynamics. The paper presents two frequency-adaptive extensions of the multivariate SONIC algorithm. The efficacy of the proposed solutions is tested using our laboratory-scale active vibration control plant.
-
Some aspects of vibration control. Part I: Active and passive correction.
PublicationPrzedstawiono ogólne podejście do modyfikacji układu mechanicznego w ruchu harmonicznym przy użyciu aktywnych i pasywnych metod. Zaproponowano metodę wyznaczania elementów macierzy układu lub struktury i nastaw regulatora, zapewniającą najefektywniejsze oddziaływanie na dynamikę ruchu.
-
Some aspects of vibration control. Part II: An optimal active controller.
PublicationPrzedstawiono teoretyczną metodę optymalnego, z punktu widzenia przyjętego wskaźnika jakości, oddziaływania na drgania liniowego układu mechanicznego. Metoda ta może być stosowana do zmniejszenia drgań układów wirujących, np. drgań okrętowych układów napędowych z silnikami tłokowymi czy drgań wirników turbinowych wywołanych biciem filmu olejowego lub siłami aerodynamicznymi.
-
An improved frequency estimator for an adaptive active noise control scheme
PublicationAn improved frequency tracker is proposed for the recently introduced self optimizing narrowband interference canceller (SONIC). The scheme is designed for disturbances with quasi-linear frequency modulation and, under second-order Gaussian random-walk assumption, can be shown to be statistically efficient. One real-world experiment and several simulations show that a considerable improvement in disturbance rejection may be achieved...
-
VIBRATION SURVEILLANCE DURING MILLING OF FLEXIBLE DETAILS WITH A USE OF THE ACTIVE OPTIMAL CONTROL
PublicationThe main goal of modern machining operations is to achieve increasingly better performance. High Speed Machining and/or High Performance Cutting, despite a lot of advantages, have also some drawbacks, for example, a possibility of losing stability and development of self-excited chatter vibration. This paper presents an approach of vibration surveillance during high speed milling with a use of active optimal control. Non-stationary...
-
Iterative learning approach to active noise control of highly autocorrelated signals with applications to machinery noise
PublicationThis paper discusses the design and application of iterative learning control (ILC) and repetitive control (RC) for high modal density systems. Typical examples of these systems are structural and acoustical systems considered in active structural acoustic control (ASAC) and active noise control (ANC) applications. The application of traditional ILC and RC design techniques, which are based on a parametric system model, on systems...
-
ESTIMATION OF NONSTATIONARY HARMONIC SIGNALS AND ITS APPLICATION TO ACTIVE CONTROL OF MRI NOISE
PublicationA new adaptive comb filtering algorithm, capable of tracking the fundamental frequency and amplitudes of different frequency components of a nonstationary harmonic signal embedded in white measurement noise, is proposed. Frequency tracking characteristics of the new scheme are studied analytically, proving (under Gaussian assumptions and optimal tuning) its statistical efficiency for quasi-linear frequency changes. Laboratory tests...
-
Active Control of Highly Autocorrelated Machinery Noise in Multivariate Nonminimum Phase Systems
PublicationIn this paper, a novel multivariate active noise control scheme, designed to attenuate disturbances with high autocorrelation characteristics and preserve background signals, is proposed. The algorithm belongs to the class of feedback controllers and, unlike the popular feedforward FX-LMS approach, does not require availability of a reference signal. The proposed approach draws its inspiration from the iterative learning control...
-
Active Damping of Impulse-Excited Flexible Plate Vibration
PublicationArtykuł prezentuje metodę aktywnego tłumienia drgań podatnej płytki wzbudzanych impulsowo. Układ sterowania składa się z aktywych wzbudników piezoelektrycznych przymocowanych do przedmiotu. Efektywnośc metody została potwierdzona badaniami eksperymentalnymi.
-
Optimization of active circuits for substrate noise suppression
PublicationZakłócenia generowane przez szybkie podukłady cyfrowe w mieszanych systemach analogowo-cyfrowych realizowanych na wspólnym podłożu stają się dużym problemem. W pracy zaproponowano metodę optymalizacji aktywnych układów tłumienia zakłóceń. Zilustrowano skuteczność działania metody na wybranym układzie i uzyskano ponad 9 dB poprawę tłumienia zakłóceń na częstotliwości 1GHz w porównaniu do znanych rozwiązań.
-
Noise performance of continuous-time active-RC filters.
PublicationW pracy przedstawiono metodę analizy właściwości szumowych filtrów aktywnych RC czasu ciągłego. Prezentowana procedura wykorzystuje model integratorowy, z odpowiednim dla tej klasy filtrów opisem macierzowym. Dokładność osiągniętych wyników teoretycznych dla przykładowego filtru potwierdzono rezultatami otrzymanymi przy pomocy symulatora SPICE.
-
Active vibration reduction with a use of enegry performance index at acceleration feedback
PublicationW pracy przedstawiono wyniki badań eksperymentalnych i symulacji w trybie Hardware-in-the-loop nowego algorytmu aktywnej redukcji drgań. Algorytm ten bazuje na energetycznym wskaźniku jakości zmodyfikowanym w ten sposób, że wykorzystuje bezpośrednio sygnał sprzężenia zwrotnego przyspieszeń.
-
The influence of frequency controlled ac drives on vibration and audible noise level on ships
PublicationOkreślono korelacje między zakłóceniami elektrycznymi a wibracjami i hałasem w okrętowych układach napędowych z przemiennikami częstotliwości. Wskazano na destrukcyjny wpływ tych czynników na jakość życia załóg pływających.
-
Merging extremum seeking and self-optimizing narrowband interference canceller - overdetermined case
PublicationActive cancellation systems rely on destructive interference to achieve rejection of unwanted disturbances entering the system of interest. Typical practical applications of this method employ a simple single input, single output arrangement. However, when a spatial wavefield (e.g. acoustic noise or vibration) needs to be controlled, multichannel active cancellation systems arise naturally. Among these, the so-called overdetermined...
-
Analysis of Vibration and Acoustic Signals for Noncontact Measurement of Engine Rotation Speed
PublicationThe non-contact measurement of engine speed can be realized by analyzing engine vibration frequency. However, the vibration signal is distorted by harmonics and noise in the measurement. This paper presents a novel method for the measurement of engine rotation speed by using the cross-correlation of vibration and acoustic signals. This method can enhance the same frequency components in engine vibration and acoustic signal. After...
-
An Instantaneous Engine Speed Estimation Method Using Multiple Matching Synchrosqueezing Transform
PublicationInstantaneous rotational speed measurement of the engine is crucial in routine inspection and maintenance of an automobile engine. Since the contact measurement of rotational speed is not always available, the vibration measurement has been used for noncontact rotational speed estimation methods. Unfortunately, the accuracy of the noncontact estimation methods by analyzing engine vibration frequency is not satisfactory due to the...
-
AC Motor Voltage and Audible Noise Dataset
PublicationThe dataset titled AC motor voltage and audible noise waveforms in ship’s electrical drive systems with frequency converters contains the voltage and sound measurement results recorded in a marine frequency controlled AC drive system. The dataset is part of research focussing on the impact of the ship’s electrical drive systems with frequency converters on vibrations and the level of audible noise on ships. The dataset allows the...
-
Identification of hydroacoustic wave sources of ship in motion
PublicationThis paper deals with results of identification tests of acoustic field spectrum of underwater noise generated by ship in motion. The field is connected with acoustic activity of ship mechanisms and devices in operation. Vibration energy generated by the mechanisms and devices is transferred through ship structural elements to surrounding water where it propagates in the form of acoustic waves of a broad band of frequencies. In...
-
Wave Method for Structural Health Monitoring: Testing Using Full-Scale Shake Table Experiment Data
PublicationAn algorithm of the wave method for structural health monitoring (SHM) is tested and calibrated using shake table experiment data of a full-scale, seven-story, reinforced-concrete building slice. The method is based on monitoring changes in the velocity of waves propagating vertically through the structure, identified by least-squares (LSQ) fit of beam models. The experiment was conducted by a team from the University of California,...
-
Tracking of the broadband source of the underwater noise in the very shallow water conditions
PublicationThe paper contains the result s, both theoretical and experimental , connected with the tracking of the underwater noise source as small ships, pontoon , diver and so on. The pro blem of security in the shallow water area is the challenge for underwater acousticians. In this paper there is take n into account the detection of the sources that move on the surface of the sea or underwater in shallow...
-
HYDROACOUSTIC NOISE MEASUREMENTS
PublicationThe paper deals mainly with investigation of underwater noise that propagation is in shallow water. In this paper has been presented the experimental investigation results concerning the distribution of the sound field pressure generated by moving ships in the shallow water at the small distance from the ship. The main acoustical characteristics describing features of the field are spectrograms in pseudo 3D system – distance and frequency...
-
Areas of Fan Research—A Review of the Literature in Terms of Improving Operating Efficiency and Reducing Noise Emissions
PublicationFans as industrial devices are among the most significant single recipients of driving energy. Therefore, they represent an important area of energy savings to reduce CO2 emissions. The ubiquity of fans and their operation under conditions different from the optimum provides an opportunity for more significant global reductions in the energy used to drive them. The second important aspect, besides energy efficiency, related to...
-
Laser-textured cross-hatched surface topography analysis with evaluation of high-frequency measurement noise
PublicationThe precision of surface roughness determination using ISO 25178 parameters relies on various factors that directly impact the measurement process. In industry applications, the contactless roughness measurement reduces data collection time. However, it introduces several potential errors, including those stemming from the environment. One of the main types of errors encountered during topography analysis is measurement noise,...
-
A modified method of vibration surveillance by using the optimal control at energy performance index
PublicationA method of vibration surveillance by using the optimal control at energy performance index has been creatively modified. The suggested original modification depends on consideration of direct relationship between the measured acceleration signal and the optimal control command. The paper presents the results of experiments and Hardware- in-the-loop simulations of a new active vibration reduction algorithm based on the energy...
-
Gdansk Bay sea bed sounding and classification of its results
PublicationThe main goal of this paper is to describe the results of sounding the Gdansk Bay sea bed by using a SES-2000 Standard parametric sub-bottom profiler. Quality of data obtained during trials depends inter alia on a proper location of transducer array to reduce influence of pitch, roll and heave motions as well as ship self noise (resulting from bubbles due to propeller and flow around hull, vibration generated by main engine and...
-
Application and modelling of Shape-Memory Alloys for structural vibration control: State-of-the-art review
PublicationOne of the most essential components of structural design for civil engineers is to build a system that is resistant to environmental conditions such as harsh chemical environments, and catastrophic disasters like earthquakes and hurricanes. Under these circumstances and disturbances, conventional building materials such as steel and concrete may demonstrate inadequate performance in the form of corrosion, deterioration, oxidizing,...
-
Diagnostics of induction motor bearings - possibility of measurements
PublicationIn induction motors damage in the elements of electromagnetic system, for example in the wiring of stator, rotor or in the magnetic circuit can appear as well as damage of mechanical parts (bearings, rotor, shaft). Bearing diagnostics is so important in supervision of motor condition, because extensive research shows that the bearings arethe elements most susceptible to damage. This paper presents the research which the author...
-
Sensorless predictive control of three-phase parallel active filter
PublicationThe paper presents the control system of parallel active power filter (APF) with predictive reference current calculation and model based predictive current control. The novel estimator and predictor of grid emf is proposed for AC voltage sensorless operation of APF, regardless of distortion of this voltage. Proposed control system provides control of APF current with high precision and dynamics limited only by filter circuit parameters....
-
A filter bank solution for active power filter control algorithms
PublicationThb paper describes the proposed active power fiIter (APF) with a new control circuit based on an algorithm using ufilter bank and a harmonic predictor. The conirol circuit was realized using the digiiaI signor processor ADSP-21065L and FPGA circuiL In the proposed circuit transient performunee of APF is improved The active power fdter circuil has been built and teste6 and some illustrative, experimental results are uIso presented...
-
An adaptation of modal control to vibration control of industrial robots
PublicationRozważania dotyczą drgań niestacjonarnego układu nośnego manipulatora IRb-6. Do nadzorowania drgań zastosowano algorytm sterowania modalnego przy energetycznym wskaźniku jakości. Celem proponowanego algorytmu jest minimalizacja poziomu drgań końcówki manipulatora, co spowoduje zwiększenie obciążeń dopuszczalnych współczesnych linii zrobotyzowanych, jak również poprawę dokładności oraz powtarzalności pozycjonowania robota.
-
Nonlinear finite element modeling of vibration control of plane rod-type structural members with integrated piezoelectric patches
PublicationThis paper addresses modeling and finite element analysis of the transient large-amplitude vibration response of thin rod-type structures (e.g., plane curved beams, arches, ring shells) and its control by integrated piezoelectric layers. A geometrically nonlinear finite beam element for the analysis of piezolaminated structures is developed that is based on the Bernoulli hypothesis and the assumptions of small strains and finite...
-
Post processing and selecting data obtain with parametric sub-bottom profiler SES-2000 Standard during sounding the Gulf of Gdansk
PublicationThe main goal of the paper is to describe the results of sounding the Gulf of Gdansk seabed using a parametric sub-bottom profiler SES-2000 Standard. Quality of obtained during trials data depends inter alia on proper location of antenna to reduce influence of pitch, roll, heave and ship noise (bubbles from propeller and a hull flow, vibration from main engine and peripheral devices). Furthermore calibration of complementary units...
-
Stability Analysis of Shunt Active Power Filter with Predictive Closed-Loop Control of Supply Current
PublicationThis paper presents a shunt active power filter connected to the grid via an LCL coupling circuit with implemented closed‐loop control. The proposed control system allows selective harmonic currents compensation up to the 50th harmonic with the utilization of a model‐based predictive current controller. As the system is fully predictive, it provides high effectiveness of the harmonic reduction, which is proved by waveforms achieved...
-
Optimum control of the selected vibration forms in mechanical systems
PublicationW artykule przedstawiono zagadnienie optymalnego sterowania wybranymi formami drgań układów mechanicznych. Dla zaprezentowania sposobu i procedury wyznaczania optymalnych nastaw regulatora i współczynników wagowych wskaźnika jakości posłużono się dwoma przykładami liczbowymi. W pierwszym z nich rozważano uproszczony układ mechaniczny składający się z dwóch sztywnych elementów skończonych połączonych za pomocą elementów sprężysto-tłumiących,...
-
Compensation of supply current harmonics, reactive power, and unbalanced load current balance in the closed-loop control of a shunt active power filter
PublicationThis paper presents the compensation tasks performed by a shunt active power filter, including compensation of harmonic currents, reactive power, and an unbalanced load current. The paper demonstrates novel control of the shunt active power filter in a closed-loop system. The control algorithm was verified by performing simulations and compared the simulated results with those obtained in an open-loop control system. All simulations...
-
Active monitoring as cognitive control of grinders design
Publication -
Vibration surveillance in modern milling machines by the spindle speed control.
PublicationPraca poświęcona jest nadzorowaniu drgań wirujących narzędzi w nowo-czesnych frezarkach. Polega ono na zastosowaniu sterowania programo-wego w układach niestacjonarnych. Dotyczy to zamkniętych układów obra-biarek, kiedy to istotną rolę odgrywają drgania samowzbudne typu chat-ter. Sygnałem sterującym jest chwilowa zmiana prędkości obrotowej. Rozważano frezowanie czołowe smukłym frezem trzpieniowym na pionowym centrum frezarskim....
-
The programmed spindle speed control to reduce the level of the chatter vibration
PublicationOpracowano strategię nadzorowania drgań ''chatter'' za pomocą programowego sterowania prędkością obrotową wrzeciona obrabiarki. Skuteczność tej strate-gii jest obserwowana w czasie całego procesu obróbkowego. Ponadto zastosowa-nie jej wymaga poniesienia tylko niewielkich nakładów finansowych, gdyż nie są konieczne zmiany w układzie napędowym i sterowania CNC.
-
The spindle speed optimal control as a mean of chatter vibration surveillance
PublicationNowa metoda nadzorowania drgań wirujących narzędzi w nowoczesnych frezarkach polega na wykorzystaniu sterowania optymalnego w układach niestacjonarnych przy energetycznym wskaźniku jakości. W rezultacie, sygnałem sterującym jest chwilowa zmiana prędkości obrotowej wrzeciona. Rozważano frezowanie czołowe smukłym frezem trzpieniowym. Wyniki symulacji komputerowych potwierdziły praktyczne uzasadnienie proponowanej metody. Drgania...
-
The spindle speed control for high speed milling vibration surveillance
PublicationW pracy przedstawiono zmodyfikowaną metodę nadzorowania drgań za pomocą sterowania optymalno-liniowego prędkością obrotową wrzeciona. Zamieszczono opis dynamiki skrawania, niestacjonarnego modelu obliczeniowego oraz metody nadzorowania drgań. Wykorzystano model modalny wirującego narzędzia, którego parametry wyznaczono zarówno metodami symulacji komputerowych, jak i - za pomocą eksperymentalnej analizy modalnej. Zamieszczono przykład...
-
Prediction of the Results of Chatter Vibration Surveillance by the Spindle Speed Control
PublicationDrgania samowzbudne typu chatter są istotnym zjawiskiem występującym podczas obróbki szybkościowej (HSM) z użyciem smukłych narzędzi. Zastosowanie optymlano-liniowego sterowania prędkością obrotową narzędzia w celu nadzorowania drgań pozwoliło zredukowac te drgania. W artykule przedstawiono sposób predykcji rezultatów nadzorowania z użyciem dwóch różnch modeli dynamiki skrawania zastosowanych w symulacjach komputerowych.
-
Chatter vibration surveillance by the optimal-linear spindle speed control
PublicationArtykuł dotyczy drgań samowzbudnych typu chatter podczas obróbki szybkościwowej frezami kulistymi. Opisano w nim niestacjonarny model procesu skrawania oraz przeprowadzono analizy dynamiki układu z opóźniającym sprzężeniem zwrotnym. W celu zredukowania drgań zaproponowano zmiany prędkości obrotowej wrzeciona. Przedstawiono także procedurę nadzorowaia drgań z wykorzystaniem opisanej metody. Dla wybranych przypadków, w artykule przedstawiono...
-
Simulation of surveilance of industrial robot's vibration with a use of the modal control
PublicationW pracy rozważano drgania niestacjonarnego układu nośnego robota IRb-6. Do nadzorowania drgań zastosowano algorytm sterowania modalnego przy energetycznym wskaźniku jakości. Celem proponowanego algorytmu jest minimalizacja poziomu drgań uchwytu manipulatora, a tym samym - zwiększenie możliwości nowoczesnych linii zrobotyzowanych, jak również poprawa dokładności i powtarzalności pozycjonowania robotów.
-
Predictive control system of the shunt active power filter
Publication