Search
Filters
total: 3760
filtered: 2680
-
Catalog
Chosen catalog filters
displaying 1000 best results Help
Search results for: NUCLEAR POWER PLANTS
-
Defence in depth conception in nuclear power plants and requirements for instrumentation and control systems
PublicationThe aim of this article is to identify and discuss some issues of the safety systems’ design for nuclear power plants equipped with the light water reactors using a defence in depth (D-in-D) conception. Because the functional safety solutions play nowadays an important role for the risk control, the basic requirements for the instrumentation and control systems are specified with regard to relevant international standards. For...
-
Comparison analysis of selected nuclear power plants supplied with helium from high-temperature gas-cooled reactor
PublicationThe article presents results of efficiency calculations for two 560 MW nuclear cycles with high-temperature gas-cooled reactor (HTGR). An assumption was made that systems of this type can be used in so-called marine nuclear power plants. The first analysed system is the nuclear steam power plant. For the steam cycle, the efficiency calculations were performed with the code DIAGAR, which is dedicated for analysing this type of systems....
-
On the Use of Selected 4th Generation Nuclear Reactors in Marine Power Plants
PublicationThis article provides a review of the possibility of using different types of reactors to power ships. The analyses were carried out for three different large vessels: a container ship, a liquid gas carrier and a bulk carrier. A novelty of this work is the analysis of the proposal to adapt marine power plants to ecological requirements in shipping by replacing the conventional propulsion system based on internal combustion engines...
-
Comparative analysis of thermodynamic cycles of selected nuclear ship power plants with high-temperature helium-cooled nuclear reactor
PublicationThis paper presents a comparative analysis of thermodynamic cycles of two ship power plant systems with a high-temperature helium- cooled nuclear reactor. The first of them is a gas system with recuperator , in which classical gas chamber is substituted for a HTGR reactor (High Temperature Gas-cooled Reactor) . The second of the considered cycles is a combined gas-steam system where working medium flux from gas turbine outlet...
-
Analysis of possible application of high-temperature nuclear reactors to contemporary large-output steam power plants on ships
PublicationThis paper is aimed at analysis of possible application of helium to cooling high-temperature nuclear reactor to be used for generating steam in contemporary ship steam-turbine power plants of a large output with taking into account in particular variable operational parameters. In the first part of the paper types of contemporary ship power plants are presented. Features of today applied PWR reactors and proposed HTR reactors...
-
Modelling of Nuclear Power Plant Steam Turbine
PublicationThe paper describes the approach to a Nuclear Power Plant steam turbine modelling which would enable on-line optimal process control (model based) and diagnosis over wide range of operating conditions caused by changing power demand. Presented model is static, multivariable and nonlinear. Such model enables analyzing the heat cogeneration aspects. Developed model is validated and verified by using archive data gained from researches...
-
Modelling of Nuclear Power Plant Steam Turbine
PublicationThe paper describes the approach to a Nuclear Power Plant steam turbine modelling which would enable on-line optimal process control (model based) and diagnosis over wide range of operating conditions caused by changing power demand. Presented model is static, multivariable and nonlinear. Such model enables analyzing the heat cogeneration aspects. Developed model is validated and verified by using archive data gained from researches...
-
Dynamic model of nuclear power plant turbine
PublicationThe paper presents the dynamic multivariable model of Nuclear Power Plant steam turbine. Nature of the processes occurring in a steam turbine causes a task of modeling it very difficult, especially when this model is intended to be used for on-line optimal process control (model based) over wide range of operating conditions caused by changing power demand. Particular property of developed model is that it enables calculations...
-
Nuclear power plant as a source of electrical energy and heat
PublicationIn this paper certain issues concerning usage of nuclear power plants as sources of not only electric power but also thermal energy will be discussed. For such a solution appeals most of all the need to limit harmful emissions of gases (including CO2) and ashes, which come from the process of burning fossil fuels, as well as the raising demand for network heat and chill. Additionally combined heat and power production brings measurable...
-
Profitability criteria of partial cogeneration in nuclear power plant.
PublicationIn this paper, profitability criteria and calculation methodology of profitability conditions for partial cogeneration in nuclear power plant (NPP) was presented. Considered NPP supplies electricity to consumers through public power system, whereas heat is expected to be supplied to consumption regions via long-distance heat transport line. First proposed profitability criterion was total annual costs of electricity and heat delivered...
-
POWER EFFICIENCY OF POWER PLANTS ON TRAILING SUCTION HOPPER DREDGERS
PublicationThis paper presents the notion of operational power efficiency and compares it with the classical definition of power efficiency. There are presented also calculation results of power efficiency for a selected suction hopper dredger and also influence of power system type of suction hopper dredger on magnitude of power efficiency of its power plant has been highlighted.
-
Human factors in nuclear power engineering in Polish conditions
PublicationThe paper “Human factors in nuclear power engineering in polish conditions” focuses on analysis of dynamics of preparing polish society to build first nuclear power plant in XXI century in Poland. Authors compare experience from constructing nuclear power plant Sizewell B (Great Britain) and Sizewell C, which is in preparation phase with polish nuclear power program. Paper includes aspects e.g. of creating nuclear safety culture...
-
Human Factors in Nuclear Power Engineering in Polish Conditions
PublicationThe paper “Human factors in nuclear power engineering in polish conditions” focuses on analysis of dynamics of preparing polish society to build fi rst nuclear power plant in XXI century in Poland. Authors compare experience from constructing nuclear power plant Sizewell B (Great Britain) and Sizewell C, which is in preparation phase with polish nuclear power program. Paper includes aspects e.g. of creating nuclear safety culture and...
-
Cogenerative micro power plants - a new direction for development of power engineering?
PublicationW pracy przedstawiono rozważania dotyczące perspektywy mikrosiłowni domowych w gospodarce rozproszonej. Przedstawiono oryginalne kryterium doboru czynnika roboczego w mikrosiłowni oraz przedstawiono sprawności cieplne i egzergetyczne obiegów Clausiusa-Rankina realizujących pracę mikrosiłowni.
-
Dynamic model of nuclear power plant steam turbine
Publication -
Fault detection in measuring systems of power plants
PublicationThis paper describes possibility of forming diagnostic relations based on application of the artifical neural networks (ANNs), intended for the identifying of degradation of measuring instruments used in developed power systems. As an example a steam turbine high-power plant was used. And, simulative calculations were applied to forming diagnostic neural relations. Both degradation of the measuring instruments and simultaneously...
-
Analysis of reliability of redundant ship power plants
PublicationW referacie przedstawiono możliwości wykorzystania teorii procesów semimarkowskich do określania charakterystyk niezawodnościowych złożonych układów napędowych o zadanym stopniu redundancji. Na przykładzie wybranego układu zaproponowano model niezawodnościowy w formie procesu stochastycznego dyskretnego w stanach i ciągłego w czasie. W oparciu o rozkład graniczny procesu wskazano na praktyczne aspekty wykorzystania uzyskanych w...
-
The influence of adsorption chillers on CHP power plants
Publication -
Nuclear retention of pre-mRNA involving Cajal bodies during meiotic prophase in plants
Publication -
APPLICATION OF REDUNDANCY IN SHIP POWER PLANTS OF OFFSHORE VESSEL
PublicationPower and propulsion systems of offshore units must be of a very high level of reliability. The loss of ability to perform functions of their components causes generally to very high economic losses, which may be increased by unused the weather window resulting to postponing the planned offshore operations. To ensure carrying out so expensive offshore operations in the most reliable way, various types of redundancies are built-in...
-
REDUNDANCY AS A WAY INCREASING RELIABILITY OF SHIP POWER PLANTS
PublicationOne of key ways of assuring a high level of reliability of a ship power plant is to design redundancy of its structural elements, for example redundancy of prime drivers, drivelines etc. This paper deals with issues related to the redundancy as a way increasing dependability of the ship power and propulsion systems. Especially, fundamental characteristics of dependability, major design strategies influencing the reliability, and...
-
Advanced Control Structures of Turbo Generator System of Nuclear Power Plant
PublicationIn the paper a synthesis of advanced control structures of turbine and synchronous generator for nuclear power plant working under changing operating conditions (supplied power level) is presented. It is based on the nonlinear models of the steam turbine and synchronous generator cooperating with the power system. Considered control structure consists of multi-regional fuzzy control systems with local linear controllers, including...
-
Advanced Control Structures of Turbo Generator System of Nuclear Power Plant
PublicationIn the paper a synthesis of advanced control structures of turbine and synchronous generator for nuclear power plant working under changing operating conditions (supplied power level) is presented. It is based on the nonlinear models of the steam turbine and synchronous generator cooperating with the power system. Considered control structure consists of multi-regional fuzzy control systems with local linear controllers, including...
-
The Possibility to use a Nuclear Power Plant as a Source of Electrical Energy and Heat
PublicationIn this article issues concernig the possibility of nuclear power plant (NPP) operation also as a source of heat, which means combined heat and power production, have been described. CHP work is possible and profitable only in those areas where high thermal power demand occurs, which means near city agglomerations such as Warsaw or the Tri-City. Two levels of thermal power delivered to the heating system have been considered. Preliminary...
-
Simplified, multiregional fuzzy model of a nuclear power plant steam turbine
PublicationPower systems, including steam turbines and synchronous generators, are complex nonlinear systems with parameters varying over time. The paper presents the developed simplified, multiregional fuzzy model of the steam turbine of a nuclear power plant turbine generator set and compares the results with a full nonlinear model and commonly used linear input-output model of a steam turbine. The proposed model consist of series of linear...
-
THERMODYNAMIC ANALYSIS OF A GENERATION IV SCWR NUCLEAR POWER PLANT CYCLE
PublicationThis article presents a flow and thermodynamic analysis of a Generation IV nuclear cycle. An SCWR (Supercritical water reactor) is a high temperature and high pressure reactor that uses water at a temperature above its thermodynamic critical point as the working fluid. The cycle used for the calculations consists of one interstage superheater and 7 regenerative heat exchangers. Division pressure was optimized in view of the cycle efficiency,...
-
Pipeline System for Heat Transportation from Nuclear Power Plant – an Optimizing Approach
PublicationOver the last few years heat piping insulation technology and pump systems efficiency have been significantly improved. Reduced thermal losses encourage heat transportation over long distances. It provides an opportunity for increasing thermodynamic efficiency of Nuclear Power Plants (NPPs) that are often located in rural areas because of safety issues. It can be achieved by Combined Heat and Power (CHP) generation, as heat produced...
-
A novel approach to energy safety improvement in the marine power plants with active power surge compensator
PublicationPaper raises a point of power surges and theirs adverse effects in the marine power plants. The article explains a source of surges appearance, and presents measurements carried out on a modern ship. It discusses effects of dynamic power transients on the ship’s energy safety. Finally it proposes, a novel approach for power surge elimination, based on medium voltage active conditioner. As well as it propose the topology and control...
-
Thermodynamic Cycle Concepts for High-Efficiency Power Plans. Part A: Public Power Plants 60+
PublicationAn analysis was carried out for different thermodynamic cycles of power plants with air turbines. Variants with regeneration and different cogeneration systems were considered. In the paper, we propose a new modification of a gas turbine cycle with the combustion chamber at the turbine outlet. A special air by-pass system of the combustor was applied and, in this way, the efficiency of the turbine cycle was increased by a few points....
-
Mercury emission from coal-fired power plants in Poland
PublicationPrzedstawiono główne źródła emisji rtęci w Polsce. W zwiazku z dużą ilością spalanego węgla, jak również planami na przyszłość węgiel kamienny i brunatny jest i będzie podstawowym źródłem produkcji energii w Polsce. Ponieważ węgiel zawiera rtęć, to podczas spalania węgla rtęć uwalniania jest do atmosfery. Spalanie węgla w elektrowniach jest i będzie w najbliższym czasie głównym źródłem emisji rtęci w Polsce. W pracy opisano metody...
-
Hydraylic turbine development vor lov-output power plants.
PublicationPraca zawiera wyniki badań nowego układu przepływowego turbiny wodnej, na tle krytyki stosowanych powszechnie technologii w hydroenergetyce. Pokazano efekty energetyczne pracy turbiny i kształt kinematyki przepływu w jej kanałach hydraulicznych. Pokazano również skutki stosowania metody optymalizacyjnej dla osiągania wyższych sprawności pracy wirnika turbiny.
-
Technical and economic conditions of supplying residential consumers with heat from nuclear power plant
PublicationThe reduction of CO2 emission requires technological shift towards carbon-free options. Cogeneration of electricity and heat based on coal and natural gas will experience generation cost increase, if the costs of emissions are imposed on the plant operators. Therefore, nuclear and renewable options should be considered. In this paper, we present the concept of electricity and heat supply system with nuclear condensing turbine adapted...
-
Thermodynamic Cycle Concepts for High-Efficiency Power Plants. Part B: Prosumer and Distributed Power Industry
PublicationAn analysis was carried out for different thermodynamic cycles of power plants with air turbines. A new modification of a gas turbine cycle with the combustion chamber at the turbine outlet has been described in the paper. A special air by-pass system of the combustor was applied, and in this way, the efficiency of the turbine cycle was increased by a few points. The proposed cycle equipped with an effective heat exchanger could...
-
Nuclear Power Plant Steam Turbine - Modeling for Model Based Control Purposes
PublicationThe nature of the processes taking place in a nuclear power plant (NPP) steam turbine is the reason why their modeling is very difficult, especially when the model is intended to be used for on-line optimal model based process control over a wide range of operating conditions, caused by changing electrical power demand e.g. when combined heat and power mode of work is utilized. The paper presents three nonlinear models of NPP steam...
-
The QDMC Model Predictive Controller for the Nuclear Power Plant Steam Turbine Control
PublicationThere are typically two main control loops with PI con trollers operating at each turbo-generator set. In this paper a model predictive controller QDMC for the steam turbine is proposed - instead of a typical PI controller. The QDMC controller utilize a step-response model for the controlled system. This model parameters are determined, based on the simplified and linear model of turbo-generator set, which parameters are identified...
-
The distributed model predictive controller for the nuclear power plant turbo-generator set
PublicationTypically there are two main control loops with PI controllers operating at each turbo-generator set. In this paper a distributed model predictive controller DMPC, with local QDMC controllers for the turbine generator, is proposed instead of a typical PI controllers. The local QDMC controllers utilize step-response models for the controlled system components. These models parameters are determined based on the proposed black-box...
-
APPLICATION OF THE KOSECKI’S METHOD IN DESIGNING OF OFFSHORE WIND POWER PLANTS FOUNDATION
PublicationThe concept of offshore wind power plants has been well developed in many European countries. There is no such thing as design of offshore wind power plants according to national tradition. The main problem is the lack of standards and guidelines. Ones being applied are Scandinavian or American methods which are not fully adapted to the conditions of the Baltic Sea. The article focuses on the monopile design, as it is currently the...
-
Thermodynamic Cycles of Air Microturbine Power Plants Working on Biomass Fuels
PublicationThe gas turbine engine is modified to work as an air turbine set which consists, in the simplest arrangement, of a compressor, a heat exchanger and a turbine. Air is a working medium for both: the compressor and the turbine. This kind of air turbine set can be applied in power plants working on biomass fuels. In this solution we can burn fuels of varying parameters in the external combustion chamber without any harmful effects...
-
Research of Emergency Modes of Wind Power Plants Using Computer Simulation
PublicationThe aim of this study is to investigate changes in the wind power plant energy production parameters under the conditions of sudden wind changes and voltage drop. To achieve these goals, a simulation of operation of wind power plants was performed. Twelve wind turbines with variable rotational speed equipped with a Fuhrländer FL 2500/104 asynchronous double-fed induction generator (DFIG) were used, each with an installed capacity...
-
Analysis of application of feed-water injector heaters to steam power plants
PublicationStrumienice parowo-wodne to urządzenia, w których zachodzi wymiana masy, pędu i energii między dwoma płynami, pozostającymi w bezpośrednim kontakcie. Mogą one pracować jako pompy, mieszalniki bądź bezprzeponowe wymienniki ciepła. W tym ostatnim aspekcie są one bardzo interesujące do użycia jako regeneracyjne podgrzewacze wody w obiegu cieplnym Rankina stosowanym w siłowniach parowych na lądzie oraz na morzu (statki i okręty). W...
-
Using adsorption chillers for utilising waste heat from power plants
Publication -
Optimization of Nuclear Power Share in the Structure of Electricity Production in Poland in Time Perspective by 2060
PublicationThe author of this paper presented the results of a system analysis using MARKAL model, aiming at the optimization of nuclear power share in power generation structure in Poland in time perspective by 2060. Optimization criterion is the minimization of the objective function, i.e. the total cost of energy system, taking into account constraints related to CO2, SOx and NOx emissions and obligatory shares of electricity from renewable...
-
Comparison of state feedback and PID control of pressurizer water level in nuclear power plant
PublicationThe pressurizer water level control system in nuclear power plant with pressurized water reactor (PWR) is responsible for coolant mass balance. The main control goal is to stabilize the water level at a reference value and to suppress the effect of time-varying disturbances (e.g. coolant leakage in primary circuit pipeline system). In the process of PWR power plant operation incorrect water level may disturb pressure control or...
-
Pipeline system for heat transportation from nuclear power plant — An optimizing approach
Publication -
Possibility to use engine compression ignition engines in floating power plants marine
PublicationCompression-ignition engines used in ship technology as main propulsion engines are large units reaching even to 50-60 MW. The engines can be used in power industry for electricity generation in a simple or combined steam turbine system in combined heat and power plants. The leading engine in such an arrangement is an internal-combustion piston engine. The main propulsion engines are used in large piston internal-combustion engines...
-
Multistatic sonar for man-made lakes and water-power plants antiterrroristic protection
PublicationArtykuł opisuje nową koncepcję dopplerowskiego sonaru multistatycznego opracowanego w Katedrze Systemów Elektroniki Morskiej Politechniki Gdańskiej. System składa się z sieci hydrofonów rozmieszczonych równomiernie w obserwowanym akwenie oraz ze źródła dźwięku w postaci fali ciągłej o stałej częstotliwości i bardzo niskim natężeniu. Dzięki zastosowaniu specjalnie opracowanych algorytmów przetwarzania sygnałów uzyskuje się poprawną...
-
Identification of the Inertia of Masses Flowing Water through the Pipes in Water Power Plants
PublicationW artykule przedstawiono sposób identyfikacji stałej czasowej reprezentującej bezwładność mas przepływającej wody w systemie rurociągów, w elektrowni wodnej. Przedstawiono strukturę modelu układu regulacji prędkości kątowej wykorzystywanego w procesie identyfikacji oraz przeprowadzono badania skuteczności działania metody w środowisku Matlab-Simulink. Opisano najistotniejsze wnioski wynikające z przeprowadzonych badań symulacyjnych.
-
Comparative analysis of trailing suction hopper dredger's various types of power plants
PublicationArtykuł przedstawia analizę porównawczą różnych typów układu energetycznego pogłębiarki ssącej nasiębiernej przeznaczonej na Bałtyk południowy. Jako kryterium oceny analizowanych wariantów układu energetycznego pogłębiarki przyjęto koszty inwestycyjne oraz koszty paliwa. Wykorzystano wskaźniki ekonomiczne: AAC oraz NPV.
-
The Influence of Cooperation on the Operation of an MPC Controller Pair in a Nuclear Power Plant Turbine Generator Set
PublicationThe paper discusses the problem of cooperation between multiple model predictive control (MPC) systems. This approach aims at improving the control quality in electrical energy generation and forms the next step in a series of publications by the authors focusing on the optimization and control of electric power systems. Cooperation and cooperative object concepts in relation to a multi MPC system are defined and a cooperative control...
-
Cascaded doubly fed induction generator for mini and micro power plants connected to grid
Publication