Search
Search results for: NARROW ELECTROSTATIC PRECIPITATOR
-
Investigation of Narrow Electrostatic Precipitator with Wire Multi-Electrode
PublicationDiesel engines emit fine particles, which are harmful to human and animal health. There are several methods for decrease particulate emission from a diesel engines, but up to now, these methods are notenough effective or very expensive. An electrostatic precipitation was proposed as an alternative method for control of a diesel particulate emission. Therefore, narrow electrostatic precipitators (ESPs) have become a subject of interest...
-
EHD Flow Measured by 2D PIV in a Narrow Electrostatic Precipitator with Longitudinal Wire Electrode
PublicationIn this paper, results of the electrohydrodynamic (EHD) flow patterns in two narrow ESPs with longitudinally-to-flow wire electrode arepresented. The influence of the ESP geometry on the EHD flow generated in the ESP was investigated. The results obtained from 2-dimensional(2D) Particle Image Velocimetry (PIV) showed similarities and differences of the particle flow in the wire-plate and wire-cylinder type ESP.
-
Electrohydrodynamic Flow Patterns in a Narrow Electrostatic Precipitator with Longitudinal Wire Electrode for Various Electrode Geometries
PublicationRecently narrow electrostatic precipitators (ESPs) have become a subject of interest because of their possible application in diesel engines. In this paper results of 2-dimensional (2D) Particle Image Velocimetry (PIV) measurements of the flow patterns in a narrow ESP for a various electrode geometries are presented. The PIV measurements were carried out in the observation plane that is perpendicular to the ESP duct. The ESP was...
-
EHD Flow Measured by 2D PIV in a Narrow Electrostatic Precipitator with Longitudinally-to-flow Wire Electrode
PublicationIn this paper, results of the electrohydrodynamic (EHD) flow patterns in two narrow ESPs with longitudinally-to-flow wire electrode are presented. The influence of the ESP geometry on the EHD flow generated in the ESP was investigated. The results obtained from 2 dimensional (2D) Particle Image Velocimetry (PIV) showed similarities and differences of the particle flow in the wire-plate and wire-cylinder type ESP.
-
Collection Efficiency in Narrow Electrostatic Precipitators with a Longitudinal or Transverse Wire Electrode
PublicationRecently narrow electrostatic precipitators (ESPs) have become a subject of interest because of their possible application in diesel engine exhaust systems. In this work, results of particle collection efficiency measurements in narrow electrostatic precipitators for negative and positive dc voltage polarity are presented. The ESP usedin this work was a parallelepiped equipped with wire discharge electrode and two collecting plate-electrodes....
-
Collection efficiency in narrow electrostatic precipitators with a longitudinal or transverse wire electrode
Publication -
Influence of electrode geometric arrangement on the operation of narrow circular electrostatic precipitator
PublicationIn this work the influence of electrode geometric arrangement on the operation of a circular electrostatic precipitator (ESP) was investigated using Particle Image Velocimetry (PIV) method. The ESP was a glass circular cylinder (29 mm in diameter, 300 mm long) equipped with a wire discharge electrode and circular-cylinder collecting electrode. The stainless-steel discharge wire electrode (0.23 mm in diameter, 100 mm long) was mounted...
-
Electrohydrodynamic flow patterns and collection efficiency in narrow wire-cylinder type electrostatic precipitator
PublicationRecently, narrow electrostatic precipitators (ESPs) have become a subject of interest because of their possible application for the cleaning of the exhaust gases emitted by diesel engines. Diesel engines emit fine particles, which are harmful to human and animal health. There are several methods for decrease particulate emission from a diesel engines, but up to now, these methods are not enough effective or very expensive. Therefore,...
-
Electrohydrodynamic secondary flow in the electrostatic precipitator with spiked electrodes
PublicationIn this work, the results of electrohydrodynamic (EHD) secondary flow measurements in an electrostatic precipitator (ESP) with one-sidedspike electrodes are presented. The EHD secondary flow was measured for one-sided spike electrodes with the spike tips directed either upstream or downstream the primary flow. The results showed different flow patterns for different spike tips direction in respect to the primary flow direction....
-
Investigation of Narrow Transverse and Longitudinal Electrostatic Precipitators
PublicationDiesel engines emit fine particles, which are harmful to human and animal health. There are several methods for decrease particulate emission from a diesel engines, but up to now, these methods are not enough effective or very expensive. An electrostatic precipitation was proposed as an alternative method for control of a diesel particulate emission. Therefore, narrow electrostatic precipitators (ESPs) have become a subject of...
-
Electrohydrodynamic secondary flow and particle collection efficiency in spike-plate multi-electrode electrostatic precipitator
PublicationIn this work the results of electrohydrodynamic (EHD) secondary flow measurements in a spike-plate type electrostatic precipitator (ESP) are presented. In the investigated ESP two-sided and one-sided spike electrodes were used as a discharge electrodes. The results of 2D PIV measurements showed that flow pattern obtained for a different spike tips positions in respect to the primary flow direction significantly changing the flow...
-
Electrohydrodynamic Secondary Flow and Particle Collection Efficiency in Spike-Plate Multi-Electrode Electrostatic Precipitator
PublicationIn this work the results of electrohydrodynamic (EHD) secondary flowmeasurements in a spike-plate type electrostatic precipitator (ESP) are presented. In the investigated ESP two-sided and one-sided spike electrodes were used as a discharge electrodes. The results of 2D PIVmeasurements showed that flow pattern obtained for a different spike tips positions in respect to the primary flow direction significantly changing the flow...
-
Electrohydrodynamic flow and particle collection efficiency in a one-sided spike-plate type electrostatic precipitator
Publication -
Electrohydrodynamic Secondary Flow and Particle Collection Efficiency in a One-sided Spike-plate Type Electrostatic Precipitator
PublicationIn this work, results of electrohydrodynamic secondary flow and particle collection efficiency measurements in an electrostatic precipitator under positive and negative voltage polarity are presented. The electrostatic precipitator had two plate collecting electrodes and a single spike discharge electrode. The spike tips were only on one side of the discharge electrode, therefore called a one-sided spike electrode. The electrohydrodynamic...
-
comparison of circular and rectangular narrow esps with longitudinal wire electrode
PublicationDiesel engines emit fine particles, which are harmful to human and animal health. There are several methods for decrease particulate emission from a diesel engines, but up to now, these methods are not enough effective or very expensive. An electrostatic precipitation was proposed as an alternative method for control of a diesel particulate emission. Therefore, narrow electrostatic precipitators (ESPs) have become a subject of...
-
Stable and degradable microgels linked with cystine for storing and environmentally triggered release of drugs
PublicationEnvironmentally sensitive, degradable microgels based on poly(N-isopropylacrylamide) (pNIPA) crosslinked with the diacryloyl derivative of cystine (BISS) were synthesized by applying surfactant-free emulsion polymerization. pNIPA contributed the sensitivity to temperature to the microgels and the cross-linker made them degradable and sensitive to pH. The morphology of the microgels was investigated by using scanning and transmission...
-
Electrostatic Zipping Actuators—Analysis of the Pull-In Effect Depending on the Geometry Parameters
PublicationContinuous work on a new generation of actuators, referred to as artificial muscles, resulted in the initiation of work on electrostatic zipping actuators, the concept of which is derived from micro electro-mechanical devices. Despite partial knowledge of their basic operating parameters, a question remains whether electrostatic zipping actuators are able to meet the expectations in the context of generated forces and control possibilities....
-
Electrostatic interface recombination in the system of disordered materials characterized by different permittivities
PublicationWe report on the analysis of an electrostatic interface recombination in a system consisting of disordered organic materials. This process is a consequence of the polarization effect which takes place at the interface of two phases characterized by different permittivities. In this paper, the impact of tail and deep localized states on the recombination order is demonstrated. We also discuss the influence of temperature on this...
-
DESIGN AND EXECUTION ERRORS AS A CAUSE OF DAMAGE TO ANTI- ELECTROSTATIC FLOORING
PublicationApart from technological lines, industrial floors are a key element in the scope of maintaining the continuity of work of both production plants and logistics centers. The constantly developing industry of industrial flooring includes both classic design and technological flooring solutions, as well as specialist solutions used in facilities where technological processes or storage require system protection against static electricity....
-
Recent progress in experimental studies of electrohydrodynamic flow in electrostatic precipitators
PublicationMany experimental, theoretical and numerical works were devoted to the electrohydrodynamic (EHD) flow generated in electrostatic precipitators (EPSs). The generally accepted conclusion from these studies is that the EHD flow plays an important role in the particle collection in ESPs. However, despite of the recent fast progress in numerical simulation and experimental techniques used in the ESPs studies many problems related to...
-
Recovering Evaluation of Narrow-Kerf Teeth of Mini Sash Gang Saws
PublicationSash gang saws with narrow-kerf saw blades are used in the production of glued laminate flooring elements in plants where dry technology is applied. This means that boards or friezes are sawn into top layer lamellae in dry conditions (moisture content of about 10–12%) from expensive wood species, often exotic. The object of this research was stellite-tipped teeth of narrow kerf saw blades sharpened under industrial conditions....
-
Protective properties of Al2O3 + TiO2 coating produced by the electrostatic spray deposition method
PublicationMechanical resistance of Al2O3 + TiO2 nanocomposite ceramic coating deposited by electrostatic spray deposition method onto X10CrAlSi18 steel to thermal and slurry tests was investigated. The coating was produced from colloidal suspension of TiO2 nanoparticles dispersed in 3 wt% solution of Al2(NO3)3, as Al2O3 precursor, in ethanol. TiO2 nanoparticles of two sizes, 15 nm and 32 nm, were used in the experiments. After deposition,...
-
Expedited Yield Optimization of Narrow- and Multi-Band Antennas Using Performance-Driven Surrogates
PublicationUncertainty quantification is an important aspect of engineering design, also pertaining to the development and performance evaluation of antenna systems. Manufacturing tolerances as well as other types of uncertainties, related to material parameters (e.g., substrate permittivity) or operating conditions (e.g., bending) may affect the antenna characteristics. In the case of narrow- or multi-band antennas, this usually leads to...
-
Video of LEGO bricks on conveyor belt - narrow plates
Open Research DataThe set contains videos of LEGO bricks (narrow plates) moving on a white conveyor belt. The videos were prepared for training neural network for recognition of LEGO bricks. The bricks were separated as much as possible and in most cases they should not overlap. The images were taken from different sides by stationary camera located over the final conveyor...
-
Video of LEGO bricks on conveyor belt - Narrow Brics
Open Research DataThe set contains videos of LEGO bricks (narrow bricks, with on side no wider than 1 stud) moving on a white conveyor belt. The videos were prepared for training neural network for recognition of LEGO bricks. The bricks were separated as much as possible and in most cases they should not overlap. The images were taken from different sides by stationary...
-
Revitalization of the Narrow-Gauge Żuławy Commuter Railway and its effect on shipping conditions in the Vistula delta
PublicationThe article presents the Żuławy Access Railway and the effect of its revitalization on the change of navigational conditions in the Vistula delta. One of the problems analyzed in the article is the intersection of two different transport branches - the inland waterway and rail transport branches. A solution to the problem of their functioning is presented, without any major restrictions. Possible changes in navigational conditions...
-
Video of LEGO bricks on conveyor belt - narrow special plates
Open Research DataThe set contains videos of LEGO bricks (narrow special plates) moving on a white conveyor belt. The videos were prepared for training neural network for recognition of LEGO bricks. The bricks were separated as much as possible and in most cases they should not overlap. The images were taken from different sides by stationary camera located over the...
-
Sawing of frozen wood with narrow-kerf saws.
PublicationPrzedstawiono wyniki badań eksperymantalnych skrawania drewna sosnowego mrożonego na pilarce ramowej PRW15M za pomocą cienkich pił. Badano opory skrawania, chropowatość powierzchni po przecinaniu, dokładność przecinania oraz przeprowadzono analize granulometryczna wiórów. Zaobserwowano wzrost oporów skrawania w raz ze spadkiem temperatury,któremu towarzyszyła również niższa dokładność przeciania w odniesieniu do drewna obrabianego...
-
Estimation of time-frequency complex phase-based speech attributes using narrow band filter banks
PublicationIn this paper, we present nonlinear estimators of nonstationary and multicomponent signal attributes (parameters, properties) which are instantaneous frequency, spectral (or group) delay, and chirp-rate (also known as instantaneous frequency slope). We estimate all of these distributions in the time-frequency domain using both finite and infinite impulse response (FIR and IIR) narrow band filers for speech analysis. Then, we present...
-
Methodology of testing positive attitudes to electrostatic discharges — measuring position
Publication -
Fast Multi-Objective Optimization of Narrow-Band Antennas Using RSA Models and Design Space Reduction
PublicationComputationally efficient technique for multi-objective design optimization of narrow-band antennas is presented. In our approach, the corrected low-fidelity antenna model (obtained through coarse-discretization EM simulations) is enhanced using frequency scaling and response correction, sampled, and utilized to obtain a fast response surface approximation (RSA) antenna surrogate. The RSA model is constructed in the reduced design space....
-
Electrostatic interactions in finite systems treated with periodic boundary conditions: Application to linear-scaling density functional theory
PublicationWe present a comparison of methods for treating the electrostatic interactions of finite, isolated systems within periodic boundary conditions (PBCs), within density functional theory (DFT), with particular emphasis on linear-scaling (LS) DFT. Often, PBCs are not physically realistic but are an unavoidable consequence of the choice of basis set and the efficacy of using Fourier transforms to compute the Hartree potential. In such...
-
Why narrow-kerf technologies are justifiable in modern sawmills?
PublicationAnaliza struktury kosztów w tartaku wykazuje, że największy wpływ na ich wartość mają koszty surowca. Przy występującej tendencji kurczenia się zasobów surowca należy dążyć do stosowania w tartakach materiałooszczędnych technologii, w których stosuje się cienkie piły. Przy prawidłowo prowadzonym procesie cięcia zapewniają one redukcję strat materiałowych i korzyści finansowe. Szczególnie wysokie zyski mogą być przy pozyskiwaniu...
-
π-Stacking attraction vs. electrostatic repulsion: competing supramolecular interactions in a tpphz-bridged Ru(ii)/Au(iii) complex
PublicationThe synthesis and characterization of a mixed metal ruthenium(II)/gold(III) complex bridged by tetrapyridophenazine (tpphz) are described. It is isostructural and isoelectronic to the well-known photocatalysts with palladium(II) or platinum(II). Concentration dependent 1H-NMR spectroscopy and XRD studies show that the electrostatic repulsion between the gold(III) moieties exceeds the attractive π-stacking interaction. Theoretical...
-
Precise Point Positioning Method Based on Wide-lane and Narrow-lane Phase Observations and Between Satellites Single Differencing
PublicationThe issue of using PPP method in position determination was formed in 1997. In most developed methods, ionospheric-free linear combination is used in order to eliminate the impact of the ionospheric delay. However, this approach does not provide the directly determination of the total value of the ambiguities, and the ambiguities for the individual signals. Therefore, in many publications methods of avoiding these deficiencies...
-
Thermodynamic and electrostatic properties of ternary Oxytricha nova TEBP-DNA complex
PublicationZa pomocą metod chemi obliczeniowej badano właściwości molekularne kompleksu telomerowego białka TEBP z Oxytricha nova w kompleksie trójskkładnikowym z DNA o sekwencji telomerowej. Wyliczone wartości energii kompleksowania wskazują specyficznie na jedną z dróg tworzenia kompleksu, gdzie wpierw podjednostka alfa łaczy się z DNA a następnie podjednostka beta dołącza się do takiego dwuskładnikowego kompleksu. Policzone rozkłady molekularnego...
-
A novel approach to bottom scattering using a narrow acoustic beam.
PublicationPrzedstawiono model opisujący w prosty sposób rozpraszanie sygnału akustycznego na dnie morskim jako filtr liniowy z odpowiedzią impulsową o zmieniającej się w czasie chwilowej dominującej częstotliwości. Przedyskutowano pasujący do tego modelu przypadek zbioru punktowych rozpraszaczy równomiernie rozmieszczonych na powierzchni dna, w tym wpływ takich parametrów jak głębokość oraz odległość pomiędzy rozpraszaczami.
-
Wood structure constraints on sawing accuracy with narrow-kerf saws
PublicationW pracy przedstawiono analizę przyczyn i przykłady niedokładności przecinania wynikających z lokalnych zmian struktury drewna.
-
Laser Investigations of Flow Patterns in Electrostatic Precipitators and Non Thermal Plasma Reactors
Publication -
Sawing frozen wood with narrow kerf saws: Energy and quality effects.
PublicationOpór skrawania zależy podczas przecinania nie tylko od wilgotności drewna lecz również od jego temperatury. W pracy przedstawiono wyniki badań eksperymentalnych przecinania drewna sosnowego zmrożonego na pilarce ramowej wielopiłowej. Dla porównania wykonano również testy dla drewna o temperaturze pokojowej. Czynnikami badanymi były: moc skrawania, dokładność przecinania w postaci grubości elementów, a także chropowatość powierzchni....
-
The fundamentals of narrow-kerf sawing; the mechanics and quality of cutting / K. A. Orłowski.
PublicationW pracy przedstawiono ekonomiczne i ekologiczne uwarunkowania dokładnego przecinania drewna za pomocą pił cienkich (o niewielkiej wartości rzazu). Opisano współczesne technologie wykorzystujące cienkie piły: pilarki tarczowe wielopiłowe, pilarki taśmowe i ramowe. W rozdziale drugim omówiono siły skrawania w ujęciu klasycznym, w którym do ich szacowania przyjmuje się przede wszystkim wartości właściwego powierzchniowego oporu skrawania,...
-
Lateral forces determine dimensional accuracy of the narrow‑kerf sawing of wood
PublicationThe shrinking global forest area limits the supply of industrially usable raw resources. This, in combination with the ever‑increasing consumption of timber due to population growth can lead to the lack of a positive balance between the annual volumetric growth and consumption of wood. An important innovation toward increasing environmental and economic sustainability of timber production is to reduce the volume of wood residues...
-
Large breasts and narrow waists indicate high reproductive potential in women
Publication -
Experimental studies on specific cutting resistance while cuttingwith narrow-kerf saws
PublicationBadania eksperymentalne właściwego oporu skrawania zostały wymuszone poprzez pojawienie się nowych technologii przecinania za pomocą cienkich pił. W przeprowadzonym eksperymencie wartościami wejściowymi były: rozwarcie całkowite ostrzy (rzaz), posuw na ostrze oraz grubość brzeszczotu piły. W ten sposób, oprócz zmian całkowitego przekroju warstwy skrawanej uwzględniano również wpływ warunków tarcia pomiędzy brzeszczotem piły, ścianami...
-
1 kapitola: Status report on frame sawing machines for narrow-kerf sawing
PublicationW opracowaniu przedstawiono genezę pilarek ramowych oraz przecinania drewna cienkimi piłami. Omówiono ekonomiczne i ekologiczne zalety tego typu obróbki. Zaprezentowano kinematykę współczesnych pilarek dostępnych na rynkach światowych: Orbit, Mamuth oraz DSG Sonic. Szczegółowo opisano układ napędowy pilarek DTPX-30 i PRW15 z hybrydowym napędem głównym i całkowitym wyrównoważeniem dynamicznym układu.
-
Bulk synthesis of carbon-filled silicon carbide nanotubes with a narrow diameter distribution
Publication -
Temperature effect on the emission spectra of narrow band Mn4+phosphors for application in LEDs
Publication -
Hydrogen-Containing Na3HTi1–xMnxF8 Narrow-Band Phosphor for Light-Emitting Diodes
Publication -
Bulk quantity and physical properties of boron nitride nanocapsules with a narrow size distribution
Publication -
Positive electrostatic therapy of metastatic tumors: selective induction of apoptosis in cancer cells by pure charges
Publication