displaying 1000 best results Help
Search results for: clumps of discs
-
Investigating the Impact of Curing System on Structure-Property Relationship of Natural Rubber Modified with Brewery By-Product and Ground Tire Rubber
PublicationThe application of wastes as a filler/reinforcement phase in polymers is a new strategy to modify the performance properties and reduce the price of biocomposites. The use of these fillers, coming from agricultural waste (cellulose/lignocellulose-based fillers) and waste rubbers, constitutes a method for the management of post-consumer waste. In this paper, highly-filled biocomposites based on natural rubber (NR) and ground tire...
-
Investigating the combined impact of plasticizer and shear force on the efficiency of low temperature reclaiming of ground tire rubber (GTR)
PublicationIn the present work, ground tire rubber (GTR) was mechano-chemically reclaimed at ambient temperature using two-roll mills. Road bitumen and styrene-butadiene-styrene (SBS)-modified bitumen at variable content (in range: 2.5–20 phr) were applied as reactive plasticizers to enhance reclaiming of GTR. For better understanding the plasticizing effect of bitumen on the quality of obtained reclaimed rubber, mechano-chemically reclaimed...
-
Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites
PublicationHybrid aluminium metal matrix composites have the potential to replace single reinforced aluminium metal matrix composites due to improved properties. Moreover, tribological performance is critical for these composites, as they have extensive application areas, such as the automotive, aerospace, marine and defence industries. The present work aims to establish the tribological characteristics of Al7068/Si3N4/BN hybrid metal matrix...
-
Wear of electroplated diamond tools in lap-grinding of Al2O3 ceramic materials
PublicationCurrent development of modern products, together with ever-increasing demands for their operation and usage, necessitate the search for new processing methods. Abrasive machining is widely used in many industrial areas, especially for processing difficult-to-machine materials such as advanced ceramics. Grinding with lapping kinematics, also called lap-grinding, is still one of the innovative methods of abrasive processing being...
-
Chemosensitization of multidrug resistant Candida albicans by the oxathiolone fused chalcone derivatives
PublicationThree structurally related oxathiolone fused chalcone derivatives appeared effective chemosensitizers, able to restore in part sensitivity to fluconazole of multidrug-resistant C.albicans strains. Compound 21 effectively chemosensitized cells resistant due to the overexpression of the MDR1 gene, compound 6 reduced resistance of cells overexpressing the ABC-type drug transporters CDR1/CDR2 and derivative 18 partially reversed fluconazole...
-
Wpływ właściwości czynników chłodniczych na straty egzergii w pompie ciepła (Influence of Refrigerants Properties for Exergy Losses in Heat Pump)
PublicationArtykuł poświęcony jest wpływowi występujących w pompie ciepła strat egzergii na jej efektywność energetyczną, a co za tym idzie koszty funkcjonowania instalacji. Autorzy prezentują tu metodologię obliczeniową, która może być zastosowana w procesach projektowania układów cieplno-przepływowych. Obliczenia zostały wykonane na podstawie typowego układu powietrznej pompy ciepła pracującej w klimacie środkowo-europejskim. Ponadto w...
-
International Journal Of Medical Research &Amp; Health Sciences (Ijmrhs)
People -
Pumps, Turbines and Small Hydropower, LEC/LAB, ET, sem.7 winter 2022/23 (PG_00042108)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
Pumps, Turbines and Small Hydropower, LEC/LAB, ET, sem.7 winter 2023/24 (PG_00042108)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
The Rayleigh model of the multipath fading channel
Open Research DataThe dataset contains the results of simulations that are part of the research on modelling the multipath fading in the communication channel. The Rayleigh fading envelope is generated using the Monte-Carlo simulation (MCS) in the LabVIEW programming environment.
-
The α-µ model of the multipath fading channel
Open Research DataThe dataset contains the results of simulations that are part of the research on modelling the multipath fading in the communication channel. The envelope of the α-µ fading process is generated using the Monte-Carlo simulation (MCS) in the LabVIEW programming environment.
-
Frequency Response Functions for Sandvik CoroBore 825 XL boring tool, 733 mm
Open Research DataFrequency Response Functions (FRF) obtained for Sandvik CoroBore® 825 XL mounted at WHN 13-15 TOS VARNSDORF CNC machine at the minimum extension of the spindle adaptor. Tool set to bore a hole with a diameter 733mm
-
Gulf of Gdańsk monitoring conducted by the Institute of Oceanography, University of Gdańsk, in 1981-1994
Open Research DataResults of the monitoring of the Gulf of Gdańsk environment are included in this archival data set. The measurements were conducted by the Institute of the Oceanography of the University of Gdańsk (IO UG) from 1981 till 1994 at the fixed sampling stations covering the area located between Hel Peninsula and the coast of the Gulf of Gdańsk, which extended...
-
Multimedia services applied to noise and hearing monitoring and measuring
PublicationThe goal of this chapter is to show a research study related to processing of data acquired by the multimedia services engineered at the multimedia systems department (MSD) of the Gdansk University of Technology. This concerns a survey on noise threat employing the multimedia noise monitoring system (MNMS) and hearing tests performed by the "I can hear. . . " system. The obtained results of the noise measurements revealed that...
-
Selected concentration techniques for gas chromatographic analysis of environmental samples
PublicationThe paper describes the role and tasks of environmental analysis and monitoring. It emphasises the leading role played by gas chromatography, especially when coupled with suitable sample preparation. This is demonstrated by some literature evidence and mainly by the author's original work on the design of sample preparation apparatus and development of GC-based methods of determination of a wide variety of organic pollutants in...
-
Application of electronic nose based on fast GC for comparison of aroma profiles of homemade cherry "Nalewka" made with addition of different amount of sugar
PublicationNalewka is a traditional Polish homemade spirit beverage and there are many different recepies for the production of nalewkas. However, it is not knownwhat amount of sugar can have influence of their aroma profiles. There is little information on the comparison of aroma profiles of Polish cherry nalewkas made with addition of different amount of sugar. For this purpose electronic nose based on fast GC has been used. Electronic...
-
Application of electronic nose based on fast GC for comparison of aroma profiles of homemade cherry "Nalewka" made with addition of different amount of sugar
PublicationNalewka is a traditional Polish homemade spirit beverage and there are many different recepies for the production of nalewkas. However, it is not knownwhat amount of sugar can have influence of their aroma profiles. There is little information on the comparison of aroma profiles of Polish cherry nalewkas made with addition of different amount of sugar. For this purpose electronic nose based on fast GC has been used. Electronic...
-
Non-linear strain rate analysis of earthquake-induced pounding between steel buildings
PublicationPast and recent earthquakes have shown that ground motions may cause severe structural damage to civil engineering structures. Earthquake-induced pounding between adjacent buildings has been identified as one of the reasons which intensifies damages. The aim of this paper is to show the results of the detailed nonlinear FEM analysis of earthquake-induced pounding between two steel buildings. The elastic – perfectly plastic material...
-
Determination of SCFAs in water using GC-FID. Selection of the separation system
PublicationIn the present study, an analytical procedure was developed for the determination of short-chain fatty acids (SCFAs) in landfill leachate and municipal wastewater employing injection of aqueous samples to gas chromatograph with flame ionization detector (GC-FID). Chromatographic conditions such as a separation system, injection volume, oven temperature program were investigated and selected. With two columns, one with a polar (polyethylene...
-
Novel stationary phases based on asphaltenes for gas chromatography
PublicationWe present the results of investigations on the possibility of the application of the asphaltene fraction isolated from the oxidized residue from vacuum distillation of crude oil as a stationary phase for gas chromatography. The results of the investigation revealed that the asphaltene stationary phases can find use for the separation of a wide range of volatile organic compounds. The experimental values of Rohrschneider/McReynolds...
-
2022-2023 - Assessment of performance of unmanned maritime vehicles (USV, UUV, AUV) by CFD and MES investigation, PG_00053662
e-Learning CoursesThe course entitled "APofUMV Assessment of Performance of Unmanned Maritime Vehicles (W-lecture) is mainly conducted for the DAPE Course Students. The lectures (W) are closely connected with the project exercises (P) where some examples for the data designs are conducted. All the AP of UMV lectures are connected with presentation following problems: - major areas of application of UMV unmanned maritime vehicles, - sea environment...
-
B-cell chronic lymphocytic leukemia/small lymphocytic lymphoma - Female, 71 - Tissue image [3310730006495781]
Open Research DataThis is the histopathological image of LYMPH NODES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Wind speed, wind direction and solar radiation datasets; wind and solar energy resources analysis
Open Research DataDataset contain the results of wind speed, wind direction and solar radiation for wind and solar energy resources analysis performed in years 2008 and 2009. Application for efficiency and profitability of solar and wind power plants anaylsis and for energy generation forecasting algorithms design and anaysis. Datasets used in doctoral dissertations,...
-
Application of Mathematics in Technology 2 [2022/23]
e-Learning Courses{mlang en}Numerical methods in electrical engineering.{mlang} {mlang pl}Metody numeryczne w elektrotechnice{mlang}
-
[IMa] Electrical methods of materials and structures characterization
e-Learning Courses{mlang pl} Dyscyplina: inżynieria materiałowa Zajęcia fakultatywne dla doktorantów I i II roku Prowadzący: prof. dr hab. inż. Piotr Jasiński Liczba godzin: 15 Forma zajęć: wykład/seminarium {mlang} {mlang en} Discipline: materials engineering Facultative course for 1st and 2nd year PhD students Academic teachers: prof. dr hab. inż. Piotr Jasiński Total hours of training: 15 teaching hours Course type: lecture/seminar {mlang}
-
METHODS OF QUANTITATIVE ANALYSIS (TEAM PROJECT) (2022/2023)
e-Learning CoursesMETHODS OF QUANTITATIVE ANALYSIS (TEAM PROJECT) - Economic Analytics, Lecture and Lab, Winter Semester 2022/2022. Teacher: dr Piotr Paradowski
-
Fundamentals of Electrotechnics and Electronics 1 [2022/23]
e-Learning CoursesBasic concepts in electrical engineering, analysis of electric circuits, phenomena occurring in electrical systems.
-
Computer modeling and design of materials 2022/2023
e-Learning CoursesComputer modeling and design of materials, kierunek: Nanotechnologia, specjalność: Mathematics for new materials design, II stopień, semestr 3
-
Theory of Organisation and Management and System's Theory
e-Learning CoursesWe will have our lectures and classes in Theory of Organisation and Management and System's Theory on Wednesday Since 9:15 till 12:00. We will meet on MsTeams and here is the link: https://teams.microsoft.com/dl/launcher/launcher.html?url=%2F_%23%2Fl%2Fmeetup-join%2F19%3Ameeting_MTBjMTg4ZWYtY2Q2NS00YjlkLWFmZTItMWUzYTcwM2ZmNzU0%40thread.v2%2F0%3Fcontext%3D%257b%2522Tid%2522%253a%2522b2b950ec-1ee3-4d9d-ac5e-4dd9db5e0b73%2522%252c%2522Oid%2522%253a%252233f97504-8676-4b87-96ad-a9394d16b3b2%2522%257d%26anon%3Dtrue&type=meetup-join&deeplinkId=ce188d79-726a-418e-ab34-eb9f59172f62&directDl=true&msLaunch=true&enableMobilePage=true&suppressPrompt=true
-
Catalysis, process design and industrial production of polymers
e-Learning Courses -
2022-2023 - Strenght of materials towards applications, PG_00053661
e-Learning CoursesThe course is mainly dedicated to the DAPE Students. From the theoretical point of view the course consists of the following problems to be discussed during the lectures and exercises: -fundamentals of strength of materials -basic structures and environment -loads on structures -strength of materials: tension, stress, analysis of stress and strain, bending moments and shearing forces, longitudinal and shearing stress in beams,...
-
Advanced Mechanics of Marine Structures II W2021/22
e-Learning CoursesLecture and Laboratory classes Advanced Mechanics of Marine Structures II W2021/22
-
Composite materials - fabrication, properties and prospects of application
e-Learning Courses -
INFRO@D Safety management of unprotected road users
e-Learning Courses -
Conservation and Protection of Architectural Heritage 2020/21
e-Learning Courses -
[ITiT] Technologies of Spatial Data Analysis and Processing
e-Learning Courses{mlang pl} Dyscyplina: Informatyka Techniczna i Telekomunikacja Zajęcia obowiązkowe dla doktorantów II roku Prowadzący: dr hab. inż. Marcin Kulawiak Liczba godzin: 30 h Forma zajęć: wykład/seminarium {mlang} {mlang en} Discipline: Technical Informatics and Telecommunications Obligatory course for 2nd year PhD students Academic teacher: dr hab. inż. Marcin Kulawiak Total hours of training: 30 teaching hours Course...
-
Application of Mathematics in Technology 2 [2020/21]
e-Learning CoursesKurs dla studentów sem. 4 na kierunku Energy Technologies studiów stacjonarnych I stopnia w języku angielskim. Metody numeryczne. Zastosowania w elektrotechnice. Wykład+ćwiczenia.
-
Physical and chemical basis of energy generation - 2023
e-Learning Courses -
Heat and mass transfer in lack of gravity
e-Learning Courses -
Application of Mathematics in Technology 2 [2021/22]
e-Learning Courses{mlang en}Numerical methods in electrical engineering.{mlang} {mlang pl}Metody numeryczne w elektrotechnice{mlang}
-
WASTEWATER TREATMENT AND DISPOSAL OF SEWAGE SLUDGE 2021
e-Learning CoursesThe aim of the course is to learn the characteristics of different types of wastewater depending on their origin (industrial sector) as well as introduce the commonly used technologies for removing pollutants from wastewater and get to know an alternative methods. Another goal is to understand the problems of management of sewage sludge generated in municipal wastewater treatment plants and industrial plants.
-
Heat and mass transfer in lack of gravity
e-Learning Courses -
Reliability of Structures - 3rd semester, Civil Engineering - Nowy
e-Learning CoursesReliability of Structures, 2nd grade studies, Civil Engineering
-
Fundamentals of Power Electronics [Energy Technologies][2020/21]
e-Learning Courses -
Fundamentals of Optical Fibers and Photonics - 2021/2022
e-Learning CoursesTechnika światłowodowa i fotonika: 2 st. 2 sem., kierunek elektronika i telekomunikacja
-
[ZiJ, EiF] Philosophy, research methodology, elements of logic
e-Learning Courses{mlang pl} Dyscyplina: nauki o zarządzaniu i jakości; ekonomia i finanse Zajęcia obowiązkowe dla doktorantów I roku Prowadzący: dr Mateusz Bonecki Liczba godzin: 30 Forma zajęć: wykład {mlang} {mlang en} Discipline: management and quality; economics and finance Obligatory course for 1st-year PhD students Academic teacher: dr Mateusz Bonecki Total hours of training: 30 teaching hours Course type: lecture {mlang}
-
2022 Wastewater Treatment and Disposal of Sewage Sludge
e-Learning CoursesThe aim of the course is to learn the characteristics of different types of wastewater depending on their origin (e.g. industrial sector) as well as to introduce the commonly used technologies for removing pollutants from wastewater and get familiar with alternative methods. Another goal is to understand the problems of management of sewage sludge generated in municipal wastewater treatment plants and industrial plants.
-
Essentials of micro and macroeconomics - Summer 2021/22
e-Learning Courses -
Essentials of micro and macroeconomics - Summer 2022/23
e-Learning Courses -
[IMe] Selected problems of heat and mass transfer
e-Learning Courses{mlang pl} Dyscyplina: Inżynieria mechaniczna (PG + IMP PAN) Zajęcia obowiązkowe Prowadzący: prof. dr. hab. inż. Dariusz Mikielewicz Liczba godzin: 20 h Forma zajęć: wykład {mlang} {mlang en} Discipline: mechanical engineering (GUT + IFFM PAS) Obligatory course Academic teacher: prof. dr. hab. inż. Dariusz Mikielewicz Total hours of training: 20 teaching hours Course type: lecture {mlang}