Search
displaying 1000 best results Help
Search results for: PROPAGATION LOSSES
-
Reservoir Influence on Pressure Wave Propagation in Steel Pipes
PublicationThe relation between the length of steel pipe and the pressure wave period in the system, reservoir-pipe-valve, is discussed. Experiments carried out for the short steel pipes showed that in such a system, the pressure wave celerity estimated using the measured wave cycles systematically increases with the increase of the pipe length. The observed differences can exceed even 90 m=s. As the pressure wave traveling in the pipe with...
-
Features of Nonlinear Sound Propagation in Vibrationally Excited Gases
PublicationWeakly nonlinear sound propagation in a gas where molecular vibrational relaxation takes place is studied. New equations which govern the sound in media where the irreversible relaxation may take place are derived and discussed. Their form depends on the regime of excitation of oscillatory degrees of freedom, equilibrium (reversible) or non-equilibrium (irreversible), and on the comparative frequency of the sound in relation to...
-
Numerical analysis of elastic wave propagation in unbounded structures
PublicationThe main objective of this paper is to show the effectiveness and usefulness of the concept of an absorbing layer with increasing damping (ALID) in numerical investigations of elastic wave propagation in unbounded engineering structures. This has been achieved by the authors by a careful investigation of three different types of structures characterised by gradually increasing geometrical and mathematical description complexities....
-
Numerical FDM modelling of wave propagation in concrete structure
PublicationThe article presents application of finite difference method to damage detection and its size evaluation in concrete structure by elastic wave propagation method. The simulations of wave propagation in concrete structure were performed for six different damage scenarios. Damages were modelled as areas with changed material properties. Investigation focused on the influence of damage size on the energy of wave reflection. Presented...
-
Selected Propagation Models Modification for Application in Container Terminal
PublicationIt is particularly important to look for any propagation model that could be useful for designing mobile radio systems in container terminal environment. The selected propagation models have been investigated. The applied research methodology has been described too. Results of the statistical adjustment in terms of signal loss determination in such environment have been analysed. The analysis have proved effectiveness of adjustment...
-
Numerical modeling of the nonlinear wave propagation in a bubble layer
PublicationRozważano zagadnienie propagacji fali wewnątrz warstwy z pęcherzykami. Omówiono model matematyczny, przedstawiono przykładowe wyniki badań teoretycznych. Analizowano zmiany ciśnienia wewnątrz warstwy, falę odbitą i bieżącą w ośrodku otaczającym, badano gęstość widmową mocy. Badania teoretyczne przeprowadzono dla różnych grubości warstwy, koncentracji pęcherzyków i wartości parametrów fali padającej.
-
Propagation of acoustic pulses in some fluids with yield stress
PublicationThis study is devoted to the derivation of approximate equations governing acoustic pulses in flows with yieldstress, including some time-dependent flows with a slow dependence on time of yield stress and apparent viscosity. Themodeling of yield stress and apparent viscosity in the vicinity of a zero deformation rate allows us to consider a thixotropicfluid as a Bingham plastic with coefficients that are dependent on time. The...
-
Lamb wave propagation in a single lap adhesive joint
Publication -
Bolted Joint Monitoring Using the Elastic Wave Propagation
Publication -
Numerical analysis of elastic wave propagation in unbounded structures
Publication -
Wave propagation in a sensor/actuator diffusion bond model
Publication -
Propagation of elestic waves in beams including damping effects.
PublicationW pracy przedstawiono wyniki analizy propagacji fali sprężystej w belce z tłumieniem wiskotycznym.
-
Flexural shera wave propagation in cracked composite beam.
PublicationW pracy przedstawiono model i wyniki analizy wpływu peknięcia na propagacje fali gietno-scinajacej w belce kompozytowej.
-
Propagation in Rectangular Waveguides Periodically Loaded with Cylindrical Posts.
PublicationAnaliza rozchodzenie się fali elektromagnetycznej w falowodach prostokątnych z okresowo rozmieszczonymi cylindrycznymi obiektami. Wynikiem analizy są stałych rozprzestrzeniania rodzajów Floquet, które uzyskuje się z rozwiązania równania własnego. W artykule przeprowadzone zostało badanie teoretyczne i eksperymentalne struktur prawie-okresowych i ich macierzy rozproszenia. Pokazano również istnienie pasm przewodzących i zaporowych,...
-
Lamb wave propagation in a single lap adhesive joint
PublicationThe aim of the paper is the analysis of Lamb wave propagation in adhesive joints. The research was performed on a single lap adhesive joint of two steel plates. Two types of joints, namely an intact and with defect were considered. In experimental investigations the condition assessment of the joint was performed with the use of antisymmetric Lamb waves excited by a plate piezo actuators and measured by a laser vibrometer. Numeri-cal...
-
Theoretical Model of Acoustic Wave Propagation in Shallow Water
PublicationThe work is devoted to the propagation of low frequency waves in a shallow sea. As a source of acoustic waves, underwater disturbances generated by ships were adopted. A specific feature of the propagation of acoustic waves in shallow water is the proximity of boundaries of the limiting media characterised by different impedance properties, which affects the acoustic field coming from a source situated in the water layer “ deformed”...
-
Induction machine behavioral modeling for prediction of EMI propagation.
PublicationThis paper presents the results of wideband behavioral modeling of an induction machine (IM). The proposed solution enables modeling the IM differential- and common-mode impedance for a frequency range from 1 kHz to 10 MHz. Methods of parameter extraction are derived from the measured IM impedances. The developed models of 1.5 kW and 7.5 kW induction machines are designed using the Saber Sketch scheme editor and simulated in the...
-
Numerical assessment of the fatigue crack propagation in ship structuraldetails.
PublicationPrzedstawiono podejście teoretyczne pozwalające na modelowanie rozwoju pęknięcia w konstrukcji kadłuba okrętu. Omówiono założenia i procedurę realizacyjną. Pokazano wyniki badań rzeczywistych modeli konstrukcji kadłuba-skrzyżowanie wiązań ramowych o jednakowej wysokości. Dokonano porównania i krytycznej analizy wyników uzyskanych na drodze teoretycznej z wynikami badań rzeczywistych.
-
A Finite Element Approach for Wave Propagation in Elastic Solids
PublicationThis book focuses on wave propagation phenomena in elastic solids modelled by the use of the finite element method. Although the latter is a well-established and popular numerical tool used by engineers and researchers all around the word the process of modelling of wave propagation can still be a challenge. The book introduces a reader to the problem by presenting a historical background and offering a broad perspective on the...
-
Hydraulic servomechanism system. Examples of reduction of power losses in the variable pressure power supply
PublicationUkład serwomechanizmu hydraulicznego najczęściej stosowany, w którym rozdzielacz dławiący jest zasilany pompą wyporową o stałej wydajności, współpracującą z zaworem przelewowym, pracujący przy stałym ciśnieniu zasilania, osiąga wysoką wartość sprawności energetycznej jedynie w punkcie maksymalnej wartości obciążenia i prędkości sterowanego silnika. Oszczędności energii przy zasilaniu układu pompą o stałej wydajności mogą być osiągnięte...
-
Losses and power balance in hydraulic satellite motor supplied with oil and HFA-E emulsion
PublicationMineral oil and HFA-E emulsion are liquids which differ in viscosity, density and lubricant properties. Therefore, supplying hydraulic satellite motor with these liquids, differences between quantity of hydraulic, volumetric and mechanical losses are observed. These losses influence efficiency of conversion of hydraulic energy into mechanical energy and thereby power balance of motor. The research of satellite motor has been conducted...
-
Theoretical and mathematical models of the torque of mechanical losses in a hydraulic rotational motor for hydrostatic drive
PublicationW pracy przedstawiono modele teoretyczne i matematyczne momentu strat mechanicznych występujących w silniku hydraulicznym obrotowym o stałej teoretycznej chłonności qMt silnika na obrót wału (o stałej teoretycznej objętości roboczej VMt silnika) i o zmiennej chłonności qMgv = bM qMt na obrót wału (o zmiennej geometrycznej objętości roboczej VMgv silnika). Modele mają służyć badaniom laboratoryjnym i symulacyjnym strat energetycznych...
-
Review of hydrogen production technologies for automotive sector – thermodynamic analysis of energy and exergy losses
PublicationFew recent years has shown that hydrogen technology has a good chance to replace petroleum technology in automotive sector. However, hydrogen in pure form practically does not occur on Earth. That is why H2 form is used only as an energy carrier and it must be produced using another source of energy form water or hydrocarbon fuels. In this paper short overview of hydrogen production technology has been presented, with energy and...
-
Productivity losses and public finance burden attributable to breast cancer in Poland, 2010–2014
Publication -
The Influence of Water and Mineral Oil on Mechanical Losses in a Hydraulic Motor for Offshore and Marine Applications
PublicationIn this paper, mechanical losses in a hydraulic motor supplied with water and mineral oil (two liquids having significantly different viscosity and lubricating properties) are described and compared. The experimental tests were onducted using a special design (prototype) of a hydraulic satellite motor. The design of the satellite motor is presented. This motor was developed to supply both with water and mineral oil and features...
-
THE INFLUENCE OF WATER AND MINERAL OIL ON MECHANICAL LOSSES IN THE DISPLACEMENT PUMP FOR OFFSHORE AND MARINE APPLICATIONS
PublicationIn this paper mechanical losses in a positive displacement pump supplied with water and mineral oil (two liquids having significantly different viscosity and lubricating properties) are described and compared. The experimental tests were conducted using a special design (prototype) of a satellite pump. The design of the satellite pump is presented in the article. The pump features a non-circular tooth working mechanism. This pump...
-
The influence of water and mineral oil on volumetric losses in the displacement pump for offshore and marine applications
PublicationIn this paper volumetric losses in a positive displacement pump supplied with water and mineral oil are described and compared. The experimental tests were conducted using a prototype of a satellite pump (with a non-circular tooth working mechanism). In this paper the sources of volumetric losses in this pump are characterised. On this basis, a mathematical model of these losses has been presented. The results of the calculation...
-
Radio wave propagation conditions for terrestrial radiocommunications in the EHF band
Publication -
Urban noise propagation modeling in the Multimedia Noise Monitoring System
Publication.
-
Propagation analysis of the point-to-point radio links operating in the band
PublicationThe theoretical possibilities of utilizing the EHF-band frequencies for point-to-point short range communications have been discussed. The most important factors that affect propagation attenuation in this band have been briefly described, as well as relevant mathematical formulas that allow for numerical analysis of these phenomena. After that, a research have been carried out in which the authors have analyzed propagation losses...
-
Nonlinear Properties of Seawater as a Factor Determining Nonlinear Wave Propagation
PublicationTaking practical advantage of nonlinear acoustical interactions occurring in seawater [1, 2] requires knowledge of the parameter of nonlinearity B=A of this medium. The literature does not offer much reports on B=A parameter value for seawater. In the few papers concerning that address the issue, results concerning ocean waters with high salinity and at large depths are given [3], while studies concerning seawater with low salinity...
-
Damage detection strategies based on propagation of guided elastic waves
PublicationW pracy przedstawiono wyniki symulacji numerycznych oraz badań eksperymentalnych nad wykorzystaniemprowadzonych falsprężystych do wykrywania ilokalizacji uszkodzeń w dwu i trójwymiarowych elementach konstrukcyjnych wykonanych z materiałów izotropowych i kompozytowych.
-
Application of guided wave propagation in diagnostics of steel bridge components
PublicationEarly detection of potential defects and identification of their location are necessary to ensure safe, reliable and long-term use of engineering structures. Non-destructive diagnostic tests based on guided wave propagation are becoming more popular because of the possibility to inspect large areas during a single measurement with a small number of sensors. The aim of this study is the application of guided wave propagation in...
-
Diagnostics of bolted lap joint using guided wave propagation
PublicationThe paper presents numerical and experimental analyses of elastic waves propagation in a bolted lap joint. In experimental investigations condition assessment of the joint was performed with the use of symmetric waves excited by a piezoactuator. Numerical calculations were conducted in commercial finite element method software Abaqus. The influence of number of bolts and the value of the initial stress on recorded signals was examined....
-
Shipping Low Frequency Noise and Its Propagation in Shallow Water
PublicationOne of the most significant factor influencing acoustical climate of the sea is underwater noise generated by moving ships. If the considered sea area has features of the shallow water, namely the wave frequency fulfils relation f < 10c/h, where c denotes phase speed of sound, and h is depths of the sea, then in certain distance from the wave source specific image of sound pressure distribution in the mean of wave modes appears....
-
Statistical adjustment of selected propagation models for applications in container terminal
Publication -
Longitudinal wave propagation. Part I—Comparison of rod theories
Publication -
Longitudinal wave propagation. Part II—Analysis of crack influence
Publication -
Numerical analysis of the finite amplitude plane wave propagation problem
PublicationRozważano zagadnienie propagacji fali płaskiej o skończonej amplitudzie w środowisku wodnym. Przedstawiono model matematyczny i przykładowe wyniki obliczeń numerycznych. Model matematyczny zbudowano w oparciu o równanie akustyki nieliniowej. Do rozwiązania zagadnienia zastosowano metodę różnic skończonych. Badano wpływ wartości parametrów numerycznych na dokładność obliczeń oraz analizowano wpływ wartości parametrów fizycznych...
-
Longitudinal wave propagation. Part II, Analysis of crack influence
PublicationW pracy analizowano wpływ pęknięć zmęczeniowych na propagacje fali wzdłużnej w prętach. Opracowano nowe typy element ów spektralnych oparte na teorii elementarnej, Love'a, Mindlina i trójpostaciowej.
-
Longitudinal wave propagation. Part I - Comparison of rod theories
PublicationW pracy przedstawiono modele spektralnych elementów skończonych do analizy propagacji fali wzdłuznej w pretach. Opracowano modele wykorzystujace teorię elementarną, teorie Love'a, teorie Mindlina oraz teorię trójpostaciową.
-
Damage detection in elements of strutures by the elastic wave propagation method.
PublicationW pracy przedstawiono wyniki badań dotyczace wykorzystania fal sprężystych do detekcji uszkodzeń i jedno i dwu wymiarowych elementach konstrukcyjnych.
-
Spectral plate element for crach detection with use of propagation wares.
PublicationW pracy przedstawiono model płyty oparty na metodzie elementów spectralnych. Przedstawiono wyniki analizy interakcji pęknięcia zmęczeniowego i propagującej się fali.
-
Analysis of guided wave propagation in adhesive joints of steel rods
PublicationThe aim of the study is the elastic wave propagation in adhesive joints of metal rods that are one of the simplest kind of glue connections. They are consisted of two metal members and an adhesive layer joining two parts together. The analysis is directed to technical diagnostics of such type of connections. Longitudinal and transversal guided waves were excited in prepared joints. Signals of propagating waves were registered in...
-
Efficient Complex Root Tracing Algorithm for Propagation and Radiation Problems
PublicationAn efficient complex root tracing algorithm for propagation and radiation problems is presented. The proposed approach is based on a discretization of Cauchy’s Argument Principle and its generalization to the C × R space. Moreover, an engagement of the tracing process with a global root finding algorithm recently presented in the literature is performed. In order to confirm a validity and efficiency of the proposed technique, a...
-
Simulation of Signal Propagation Along Fractional-Order Transmission Lines
PublicationIn this paper, the simulation method of signal propagation along fractional-order (FO) transmission lines is presented. Initially, fractional calculus and the model of FO transmission line are introduced. Then, the algorithm allowing for simulation of the nonmonochromatic wave propagation along FO transmission lines is presented. It employs computations in the frequency domain, i.e., an analytical excitation is transformed to the...
-
Simulation of Wave Propagation in Media Described by Fractional-Order Models
PublicationIn this paper, algorithms for simulation of the wave propagation in electromagnetic media described by fractional-order (FO) models (FOMs) are presented. Initially, fractional calculus and FO Maxwell's equations are introduced. The problem of the wave propagation is formulated for media described by FOMs. Then, algorithms for simulation of the non-monochromatic wave propagation are presented which employ computations in the time...
-
Detection of debonding in adhesive joints using Lamb wave propagation
PublicationAdhesively bonded joints are widely used in many branches of industry. Mechanical degradation of this type of connections does not have significant symptoms that can be noticed during visual assessment, so non-destructive testing becomes a very important issue. The paper deals with experimental investigations of adhesively bonded steel plates with different defects. Five samples (an intact one and four with damages in the form...
-
Hazardous material-related propagation of the effects of train accidents in the subgrade
PublicationA large part of the transport of hazardous materials is carried out by rail. Therefore, the security of these transports is becoming increasingly important. Every catastrophe involving dangerous materials has a negative impact on the participants of the incident and the surrounding environment, because its range is generally not local. It follows that in the event of a catastrophe, its effects should be minimized and remediation...
-
Numerical Study of Concrete Mesostructure Effect on Lamb Wave Propagation
PublicationThe article presents the results of the numerical investigation of Lamb wave propagation in concrete plates while taking into account the complex concrete mesostructure. Several concrete models with randomly distributed aggregates were generated with the use of the Monte Carlo method. The influence of aggregate ratio and particle size on dispersion curves representing Lamb wave modes was analyzed. The results obtained for heterogeneous...