Katalog Publikacji
Filtry
wszystkich: 63963
wyświetlamy 1000 najlepszych wyników Pomoc
Katalog Publikacji
Rok 2023
-
The elasto-plastic numerical study of crack initiation in notched PMMA specimens under uniaxial loading conditions – Tension and torsion
PublikacjaThis paper presents the results of FEM numerical calculations aimed at describing the plastic strain and stress fields under critical loading conditions: tensile force or torsional moment. The calculations were carried out with reference to the results of experimental tensile and torsional tests of flat PMMA specimens weakened with V-notches of different root radii: 0.5, 2 and 10 mm. The procedure for conducting nonlinear numerical...
-
The efficiency of scientific activities and technology transfer in higher education in Poland
PublikacjaThe objective of the article is to measure and evaluate the efficiency of scientific activity and technology transfer to the economy by public higher education institutions (HEIs) in Poland and to formulate recommendations for state policy to increase the effectiveness of the technology transfer process by them. The study measured scientific activity and technology transfer separately in two groups of higher education institutions...
-
The Effects of Two Kinds of Dietary Interventions on Serum Metabolic Profiles in Haemodialysis Patients
Publikacja -
The Effects of the “Sling Shot” Device on Bench Press Performance, Mechanical Properties of Muscle, and Movement Kinematics
Publikacja -
The effects of the IM1-12Br ionic liquid and the oxytetracycline mixture on selected marine and brackish microorganisms
PublikacjaThe number of applications and commercialized processes utilizing ionic liquids has been increasing, and it is anticipated that this trend will persist and even intensify in the future. Ionic liquids possess desirable characteristics, such as low vapor pressure, good water solubility, amphiphilicity, and stability. Nevertheless, these properties can influence their environmental behavior, resulting in resistance to biotic and abiotic...
-
The effects of ischemia during rest intervals on strength endurance performance
Publikacja -
The effects of gas exposure on the graphene/AlGaN/GaN heterostructure under UV irradiation
PublikacjaThis work demonstrates a graphene/AlGaN/GaN sensing device with two-dimensional electron gas (2DEG) toward nitrogen dioxide (NO2), tetrahydrofuran, and acetone detection under UV light irradiation. We propose combining measurements of the DC characteristics with a fluctuation-enhanced sensing method to provide insight into the gas detection mechanisms in the synergistic structure of highly stable GaN and gas-sensitive graphene....
-
The effect of waste-expanded perlite on alkali activation of ground granulated blast furnace slag
Publikacja -
The Effect of Titanium Oxyfluoride Morphology on Photocatalytic Activity of Fluorine-Doped Titanium(IV) Oxide
PublikacjaTitanium oxyfluoride (TiOF2) is a metastable product that can be obtained in a fluorine-rich environment. This material can also be a valuable precursor in the synthesis of titanium(IV) oxide (TiO2). However, the effect of TiOF2 morphology on the physicochemical properties of TiO2 has not been studied so far. In this work, single-phase TiOF2 was prepared by a solvothermal method. The as-synthesized samples exhibited a variety of...
-
The effect of thermal modification on the quality of the milled surface of beech and pine wood
PublikacjaThe article deals with the effect of thermal modification on the quality of the created surface during milling on CNC milling cutters. The quality of the created surface is evaluated based on surface roughness, specifically its roughness parameter Ra. The observed surface is created by a shank cutter with a diameter of 20 mm and three cutting edges in a spiral at a standard speed of 18,000. min-1. The article compares thermally...
-
The effect of sunscreen 4‐methylbenzylidene camphor in different and reproductive models, its bioaccumulation and molecular effects on ligand‐receptor interaction, and protein expression
Publikacja4-Methylbenzylidene camphor (4-MBC) is a photo-absorbing UV filter prevalently used in cosmetics, which can be absorbed into circulation and cause systemic effects. 4-MBC is continued to be released in the environment despite the growing knowledge about its bioaccumulation and endocrine disrupting effects. Previous reviews have mentioned UV-filter together but this review considers 4-MBC alone, due to its prevalence and concerning...
-
The Effect of Sodium Tetrafluoroborate on the Properties of Conversion Coatings Formed on the AZ91D Magnesium Alloy by Plasma Electrolytic Oxidation
PublikacjaMagnesium and its alloys are widely used in many areas because of their light weight, excellent dimensional stability, and high strength-to-weight ratio. However, the material exhibits poor wear and corrosion resistance, which limits its use. Plasma electrolytic oxidation (PEO) is an effective surface modification method for producing ceramic oxide layers on Mg and their alloys. The influence of the additions of sodium tetrafluoroborate...
-
The Effect of Pt-type Catalysts on Self-adhesive Properties of Silicone Pressure-sensitive Adhesives
Publikacja -
The Effect of Powder and Emulsion Binders on the Tribological Properties of Particulate Filled Glass Fiber Reinforced Polymer Composites
Publikacja -
The effect of PEDOT morphology on hexavalent chromium reduction over 2D TiO2/PEDOT photocatalyst under UV–vis light
PublikacjaThe present study represents an approach to apply organic-inorganic hybrid materials for photocatalytic removal of heavy metals from the aqueous environment. The photocatalytic activity of the semiconductor modified with the conjugated polymer may depends on the conjugated polymer type, its amount and morphology. Therefore, in the present study the effect of poly (3, 4-ethylenedioxythiophene) (PEDOT) morphology on adsorption and photoreduction...
-
The effect of multiaxial geocomposite reinforcement on fatigue performance and crack propagation delay in double-layered asphalt beams
PublikacjaThe presented study investigates the effect of a recently developed multiaxial geocomposite made of polypropylene geogrid and non-woven fabric on the delay of crack propagation, based on four-point bending tests of large asphalt concrete beams – both for reinforced and non-reinforced specimens. Several approaches are described in this study, including analysis of stiffness modulus decrease and analysis of crack propagation using...
-
The effect of local anaesthetics on apoptosis and NETosis of human neutrophils in vitro: comparison between lidocaine and ropivacaine
Publikacja -
The effect of impacted third molars on second molar external root resorption, a cross-sectional cone beam computed tomography study
PublikacjaBackground: Third molars have the highest prevalence of impaction in teeth and can cause pathological damage on the adjacent second molars. This study aims to evaluate the effects of factors related to impacted third molars on external root resorption (ERR) in adjacent second molars using cone-beam computed tomography (CBCT). Material and Methods: In CBCTs, the effect of impacted third molars on the root surface of adjacent second...
-
The effect of hybridization of fire retarded epoxy/flax-cotton fiber laminates by expanded vermiculite: Structure-property relationship study
PublikacjaThe study describes the hybridization of epoxy/flax-cotton (EP/FF) composites containing ammonium polyphosphate (APP) with micrometric expanded vermiculite (VMT) (1–10 wt%). The efficiency of hybridization of flame retarded epoxy/flax-cotton composites was assessed by performing static tensile and flexural strength evaluation, supplemented by impact strength measurements of the composites. Moreover, thermal and thermomechanical...
-
The effect of fixed adsorption bed height on adsorption of gaseous mixture of volatile organic compounds
Publikacja -
The Effect of Fertilization on the Structure of the Aboveground Biomass of Several Cultivars of Jerusalem Artichoke (Helianthus tuberosus L.)
Publikacja -
The Effect of Cold Plasma on Selected Parameters of Bovine Colostrum
Publikacja -
The Effect of C45 Carbon Black-Phosphomolybdic Acid Nanocomposite on Hydrogenation and Corrosion Resistance of La2Ni9Co Hydrogen Storage Alloy
PublikacjaIn this paper, we analysed the influence of corrosion processes and the addition of a carbon black-heteropoly phosphomolybdic acid (C45-MPA) nanocomposite on the operating parameters of a hydride electrode obtained on the basis of the intermetallic compound La2Ni9Co. The electrochemical properties of negative electrodes for NiMH batteries were studied using galvanostatic charge/discharge curves, the potentiostatic method, and electrochemical...
-
The Double Cognitive Bias of Mistakes: A Measurement Method
PublikacjaThere is no learning without mistakes. However, making mistakes among knowledge workers is s�ll seeing shameful. There is a clash between posi�ve a�tudes and beliefs regarding the power of gaining new (tacit) knowledge by ac�ng in new contexts and nega�ve a�tudes and beliefs toward accompanying mistakes that are sources of learning. These contradictory a�tudes create a bias that is doubled by the other shared solid belief...
-
The Design of Cavity Resonators and Microwave Filters Applying Shape Deformation Techniques
PublikacjaThis article introduces shape deformation as a new approach to the computer-aided design (CAD) of high-frequency components. We show that geometry deformation opens up new design possibilities and offers additional degrees of freedom in the 3-D modeling of microwave structures. Such design flexibility is highly desirable if the full potential of additive manufacturing (AM) is to be exploited in the fabrication of RF and microwave...
-
The dependence of linear viscoelasticity limits of cold-recycled mixtures on time of curing and compaction method
PublikacjaCold-recycled mixtures are currently among the most widely used and investigated methods that enable recycling of old pavement structures in an environmentally friendly manner. Upon milling, the old pavement structure – whose gradation can be improved with addition of virgin aggregate – is mixed and compacted at ambient temperature. The main binding agents are bituminous emulsion and cement. Due to their dual binding behaviour,...
-
The Cultures of Knowledge Organizations: Knowledge, Learning, Collaboration (KLC)
PublikacjaThis book focuses on seeing, understanding, and learning to shape an organization’s essential cultures. The book is grounded on a fundamental assumption that every organization has a de facto culture. These “de facto cultures” appear at first glance to be serendipitous, vague, invisible, and unmanaged. An invisible and unrecognized de facto culture can undermine business goals and strategies and lead to business failures. The authors...
-
The correlation of fractal dimension to fracture surface slope for fatigue crack initiation analysis under bending-torsion loading in high-strength steels
PublikacjaIn this study, the fractal dimension of fatigue fracture surfaces is investigated in order to find an alternative failure loading indicator. Some of many metrological factors are generalized by reducing the fracture surface structure to one factor and develop an entire fracture surface procedure by analyzing the impact of surface slope and calculation resolution. Three notched geometries are studied under cyclic bending-torsion:...
-
The correlation between nutritional and health potential and antioxidant properties of raw edible oils from cultivated and wild plants
PublikacjaThe nutritional properties and health potential of oils from 15 various cultivated and wild plants were investigated on the basis of the fatty acids profiles, total carotenoids and tocopherols content, antioxidant properties and health potential indexes such as atherogenicity index (AI). The oil contents of the plants varied between 0.9 g/100 g for lychee seeds and 29.7 g/100 g for borage seeds. The tocopherol content in oils ranged...
-
The congruence of mental models in entrepreneurial teams – implications for performance and satisfaction in teams operating in an emerging economy
PublikacjaPurpose – The paper aims to explore the relationship between the congruence of mental models held by the members of entrepreneurial teams operating in an emerging economy (Poland) and entrepreneurial outcomes (performance and satisfaction). Design/methodology/approach – The data obtained from 18 nascent and 20 established entrepreneurial teams was analysed to answer hypotheses. The research was quantitative and was conducted using...
-
The complexity of bicriteria tree-depth
PublikacjaThe tree-depth problem can be seen as finding an elimination tree of minimum height for a given input graph G. We introduce a bicriteria generalization in which additionally the width of the elimination tree needs to be bounded by some input integer b. We are interested in the case when G is the line graph of a tree, proving that the problem is NP-hard and obtaining a polynomial-time additive 2b-approximation algorithm. This particular...
-
The comparison of antioxidant properties and nutrigenomic redox-related activities of vitamin C, C-vitamers, and other common ascorbic acid derivatives
PublikacjaThe term ‘vitamin C’ describes a group of compounds with antiscorbutic activity of L-ascorbic acid (AA). Despite AA’s omnipresence in plant-derived foods, its derivatives have also been successfully implemented in the food industry as antioxidants, including the D-isomers, which lack vitamin C activity. This study aimed to determine the relationship between redox-related activities for five derivatives of AA using electrochemical,...
-
The Combination of Beta-Blockers and ACE Inhibitors Across the Spectrum of Cardiovascular Diseases
Publikacja -
The coexistence and competition of canonical and comammox nitrite oxidizing bacteria in a nitrifying activated sludge system – Experimental observations and simulation studies
PublikacjaThe second step of nitrification can be mediated by nitrite oxidizing bacteria (NOB), i.e. Nitrospira and Nitrobacter, with different characteristics in terms of the r/K theory. In this study, an activated sludge model was developed to account for competition between two groups of canonical NOB and comammox bacteria. Heterotrophic denitrification on soluble microbial products was also incorporated into the model. Four 5-week washout...
-
The characterization of collagen‑based scaffolds modified with phenolic acids for tissue engineering application
PublikacjaThe aim of the experiment was to study the morphology of collagen-based scaffolds modified by caffeic acid, ferulic acid, and gallic acid, their swelling, and degradation rate, as well as the biological properties of scaffolds, such as antioxidant activity, hemo- and cytocompatibility, histological observation, and antibacterial properties. Scaffolds based on collagen with phenolic acid showed higher swelling rate and enzymatic...
-
The Challenges Of The Next Generation Leader 5.0
Publikacjahttp://ak.aos.sk/images/repozitar/zborniky/NTPP_clanky23/10_Balcerzyk.pdf
-
The Challenge of Quantification: An Interdisciplinary Reading
PublikacjaThe present work looks at what we call “the multiverse of quantification”, where visible and invisible numbers permeate all aspects and venues of life. We review the contributions of different authors who focus on the roles of quantification in society, with the aim of capturing different and sometimes separate voices. Several scholars, including economists, jurists, philosophers, sociologists, communication and data scientists,...
-
The biological role of prolyl oligopeptidase and the procognitive potential of its peptidic inhibitors from food proteins
PublikacjaProlyl oligopeptidase (POP) is a conserved serine protease belonging to proline-specific peptidases. It has both enzymatic and non-enzymatic activity and is involved in numerous biological processes in the human body, playing a role in e.g., cellular growth and differentiation, inflammation, as well as the development of some neurodegenerative and neuropsychiatric disorders. This article describes the physiological and pathological...
-
The Biocompatibility and Self-Healing Effect of a Biopolymer’s Coating on Zn Alloy for Biomedical Applications
Publikacja -
The beneficial use of nitric oxide during cardiopulmonary bypass on postoperative outcomes in children and adult patients: a systematic review and meta-analysis of 2897 patients
Publikacja -
The Association Between Religion and Healthcare Professionals’ Attitudes Towards the Conscience Clause. A Preliminary Study From Poland
Publikacja -
The Association Between Religion and Healthcare Professionals’ Attitudes Towards the Conscience Clause. A Preliminary Study From Poland
PublikacjaObjectives: This study was designed to determine the relationship between religion and healthcare practitioners’ attitudes towards conscience clauses in Poland.Methods: We developed a survey assessing impact of religion on attitudes healthcare professionals towards the conscience clause. These questions were explored using a sample of 300 Polish healthcare professionals.Results: The results indicate that religiosity...
-
The Association between Hyponatremia and Psychotropic: An Observational Study in Chronic Forensic Rehabilitation Ward at Mental Health Hospital, Taif, Saudi Arabia
Publikacja -
The assessment of solar photovoltaic in Poland: the photovoltaics potential, perspectives and development
PublikacjaThe following article explains the current condition of the photovoltaics sector both in Poland and worldwide. Recently, a rapid development of solar energy has been observed in Poland and is estimated that the country now has about 700,000 photovoltaics prosumers. In October 2021, the total photovoltaics power in Poland amounted to nearly 5.7 GW. The calculated technical potential of photovoltaics in Poland is 153.484 PJ (42.634...
-
The Arnold conjecture in $ \mathbb C\mathbb P^n $ and the Conley index
Publikacjan this paper we give an alternative, purely Conley index based proof of the Arnold conjecture in CP^n asserting that a Hamiltonian diffeomorphism of CP^n endowed with the Fubini-Study metric has at least (n+1) fixed points.
-
The Application of Polymer Inclusion Membranes for the Removal of Emerging Contaminants and Synthetic Dyes from Aqueous Solutions—A Mini Review
Publikacja -
The Application of Polyethersulfone Ultrafiltration Membranes for Separation of Car Wash Wastewaters: Experiments and Modelling
Publikacja -
The Application of Phenolic Acids in The Obtainment of Packaging Materials Based on Polymers—A Review
Publikacja -
The Application of Dynamic Electrochemical Impedance Spectroscopy (DEIS) Technique in Corrosion and Corrosion Inhibition Studies
Publikacjaorrosion studies have attracted considerable interest in the areas of materials chemistry and industrial chemistry, as it affects the direct and indirect costs of industry, leading to huge economic setbacks due to the need for repair, maintenance, and even shutdowns due corrosion damage. This new volume is a comprehensive resource that presents new and up-to-date, theoretical, and experimental corrosion inhibition studies.
-
The Application of Cluster Analysis in the Assessment of the Weldability of Unalloyed Steels
PublikacjaNon-alloy steels constitute a large group of steels characterised by diversified chemical composition, structural morphology and a wide range of mechanical properties (determining weldability). The paper presents results of multidimensional analyses (based on cluster analysis) of 110 selected unalloyed steel grades. Properties adopted as diagnostic features included the chemical composition, mechanical properties (yield point)...
-
The Antioxidant Properties of Selected Varieties of Pumpkin Fortified with Iodine in the Form of Potassium Iodide and Potassium Iodate
Publikacja -
The analysis of factors increasing the odds for type 2 diabetes mellitus remission following re-do bariatric surgery after laparoscopic sleeve gastrectomy- cohort study
Publikacja -
The Advancement of Biodegradable Polyesters as Delivery Systems for Camptothecin and Its Analogues—A Status Report
Publikacja -
The Action Mechanisms, Anti-Cancer and Antibiotic-Modulation Potential of Vaccinium myrtillus L. Extract
PublikacjaHerbal medicinal products containing Vaccinium myrtillus L. (bilberry) fruits and fruit extracts are widely available in the market. Although bilberry leaves and stems are considered as bio-waste, they contain much higher levels of phenolic compounds than fruits. The study aimed to investigate the antimicrobial and anticancer potential of aerial part extracts from Vaccinium myrtillus L. (V. myrtillus, VM) plants harvested at high...
-
The accessibility, necessity, and significance of certified reference materials for total selenium content and its species to improve food laboratories' performance
PublikacjaMicronutrients are one of the most important groups of nutrients that our body needs daily in trace amounts to tackle deficiencies. Selenium (Se) is a mineral that occurs naturally in foods and is an essential component of selenoproteins that support the healthy functioning of the human body. Therefore, monitoring dietary Se concentrations must be a higher priority to meet daily intakes. Fulfillment can be addressed through applying...
-
Texture or Linker? Competitive Patterning of Receptor Assembly toward Ultra-Sensitive Impedimetric Detection of Viral Species at Gold-Nanotextured Titanium Surfaces
PublikacjaIn this work, we study the electrodes with a periodic matrix of gold particles pattered by titanium dimples and modified by 3-mercaptopropionic acid (MPA) followed by CD147 receptor grafting for specific impedimetric detection of SARS-CoV-2 viral spike proteins. The synergistic DFT and MM/MD modeling revealed that MPA adsorption geometries on the Au–Ti surface have preferential and stronger binding patterns through the carboxyl...
-
Textile reinforced concrete members subjected to tension, bending, and in-plane loads: Experimental study and numerical analyses
PublikacjaTextile reinforced concrete has raised increasing research interest during the last years, mainly due to its potential to be used for freeform shell structures involving complex load situations. Yet, most experimental work has focused on test setups with primarily uniaxial loading. In the current work, such setups are complemented with a novel test setup of deep beams, including in-plane bending and shear. Further, nonlinear finite...
-
Testing the Effect of Bathymetric Data Reduction on the Shape of the Digital Bottom Model
PublikacjaDepth data and the digital bottom model created from it are very important in the inland and coastal water zones studies and research. The paper undertakes the subject of bathymetric data processing using reduction methods and examines the impact of data reduction according to the resulting representations of the bottom surface in the form of numerical bottom models. Data reduction is an approach that is meant to reduce the size...
-
Testing of Technical Fabrics under Fast Camera Control
PublikacjaThe dynamic development of measurement and recording techniques has been changing the way one conceives material strength. In this study, two different methods of evaluating the strength of fabrics are compared. The first is the typical and commonly used technique based on the use of a testing machine. The second method uses the so-called “fast camera” to monitor the entire process of the destruction of a fabric sample and analyse...
-
Terminal charging scheduling of battery electric buses based on vehicle routing problem
PublikacjaElectric buses are considered to be a viable solution for reducing emission in dense urban areas. However, the greater charging time is a huge challenge for operators. In this paper, charging scheduling method was elaborated based on vehicle routing problem using mixed-integer linear programming model. The main novelty of the paper is the combination of modelling aspect, namely flexible turn sequence and heterogeneous shared charging...
-
Teologia Johna Henry’ego Newmana i jej ekumeniczne skutki
Publikacja -
Temperature Evolution, Material Flow, and Resulting Mechanical Properties as a Function of Tool Geometry during Friction Stir Welding of AA6082
PublikacjaThe friction stir welding process was simulated for joining AA6082 aluminum alloy with the use of the computational fluid dynamics method. Two different tool geometries were used—a tapered cylindrical pin (simple pin) and a hexagonal pin with grooves (complex pin). The analysis of the simulations performed was discussed in terms of temperature evolution during the process, total heat input, residual stresses and material flow....
-
Telomerase inhibition - unfulfilled hopes in the perfect molecular target
PublikacjaTelomerase plays a pivotal role in cell proliferation, homeostasis, and neoplastic transformation, making it a promising molecular target for cancer chemotherapy. Of note, although hTERT has been explored thoroughly as a target, none of the promising molecules has been approved as a drug until now. The subject of research conducted as part of my doctoral dissertation is explaining the cellular and molecular mechanism of action...
-
Technology-Enhanced Environmental Learning: Co-design of Educational Mobile Application Case
PublikacjaThe research material consisted of quantitative data collected on the application during the first testing phase by early adopters. The results suggest that the most frequently used features of the app were related to transport and educational activities. While women tended to split their time between transport and learning, men focused mainly on transport. This study contributes to the growing field of the use of educational...
-
Technology-Enhanced Environmental Learning: Co-design of Educational Mobile Application Case
PublikacjaThe process of co-creating an educational mobile application to support environmentally friendly behavior is presented in this paper. The research material consisted of quantitative data collected on the application during the first testing phase by early adopters. The results suggest that the most frequently used features of the app were related to transport and educational activities. While women tended to split their time between...
-
Technology brands in the digitally-based and network economy. Setting the background
PublikacjaThis chapter defines and draws a general picture on Digital Technologies and Technology Brands’ meaning in the current economy. It contextualises the role and channels of digital technology’s impact on their shaping technology brands in network economy. It briefly explains why digital, innovative technologies constitute a perfect background and environment for technology brands of global scope. It discusses the place of technology...
-
Technology adoption review for ageing well: analysis of technical solutions
PublikacjaWhile several technological solutions are available for older adults to improve their wellbeing and quality of life, little is known about the gaps between the needs, provided solutions, and their adoption from a more pragmatic perspective. This paper reports on reviewing existing technological solutions for older adults, which span the work life, life in the community, and wellbeing at home. We analyzed 50 different solutions...
-
Technologies for Joining and Forming Thin-Walled Structures in the Construction of Transportation Vehicles
PublikacjaEditorial
-
Technological vs. Non-Technological Mindsets: Learning From Mistakes, and Organizational Change Adaptability to Remote Work
PublikacjaThe permanent implementation of the change in working methods, e.g., working in the virtual space, is problematic for some employees and, as a result, for management leaders. To explore this issue deeper, this study assumes that mindset type: technological vs. non-technological, may influence the organizational adaptability to change. Moreover, the key interest of this research is how non-technological mindsets...
-
Technological solutions for boosting hydrogen role in decarbonization strategies and net-zero goals of world shipping: Challenges and perspectives
PublikacjaFacing the problems concerning greenhouse gas (GHG) emissions from international ocean shipping has meant that the latest regulations of the International Maritime Organization, issued on 1st January 2023, have come into force, with the aim of reducing GHG emissions from maritime activities. Hydrogen has been suggested as an alternative fuel to achieve decarbonization ambitions in the near future. Although hydrogen has been investigated...
-
Techno-economic evaluation of combined cycle gas turbine and a diabatic compressed air energy storage integration concept
PublikacjaMore and more operational flexibility is required from conventional power plants due to the increasing share of weather-dependent renewable energy sources (RES) generation in the power system. One way to increase power plant’s flexibility is integrating it with energy storage. The energy storage facility can be used to minimize ramping or shutdowns and therefore should lower overall generating costs and CO2 emissions. In this article,...
-
Techno-economic assessment of cooperation of hybrid renewable energy sources with hydrogen storage
PublikacjaThe paper presents a technical and economic analysis of the power supply for a model industrial facility with the use of the most promising renewable energy sources (RES), supported by a hydrogen energy storage. This scenario was compared with the variants of supplying the facility directly from the grid and from RES without energy storage. A strategy was proposed for powering the plant aimed at maximising self-consumption of self-generated...
-
Technique for reducing erosion in large-scale circulating fluidized bed units
PublikacjaThis paper presents a methodology, implemented for a real industrial-scale circulating fluidized bed boiler, to mitigate the risk of heating surfaces exposed to an intensive particle erosion process. For this purpose, a machine learning algorithm was developed to support the boiler reliability management process. Having a tool that can help mitigate the risk of uncontrolled power unit failure without expensive and technically complex...
-
Techniki zwiększania efektywności metody elementów skończonych poprzez redukcję dziedziny obliczeniowej z wykorzystaniem własności geometrii struktur
PublikacjaWspółczesna elektronika ze względu na swój szybki rozwój wymaga od nas efektywnego modelowania zjawisk polowych. Celem rozprawy jest zwiększanie efektywności metody elementów skończonych poprzez redukcję dziedziny obliczeniowej z wykorzystaniem własności geometrii struktur oraz jej hybrydyzację z użyciem technik analitycznych. Rozprawa zawiera przegląd stanu wiedzy na temat dostępnych obecnie technik modelowania jak również opis...
-
Technical and economic analysis of energy storage in the compressed air technology with low capacity for the production plant
PublikacjaCompressed air energy storage (CAES) system is a promising technology due to its numerous advantages, including relatively low maintenance cost, a long lifespan and high operational flexibility. This article explores the possibility of designing a CAES power plant as a source of electricity and heat for an existing industrial plant. The study involves the technical analysis of the power plant parameters and the economic analysis...
-
Targeting Spike‐ACE2 Interface of SARS‐CoV‐2 and its Omicron Variant: A Comparative Screening of Potential Inhibitors for Existing and Anticipating Variants Using Molecular Modelling Approach
PublikacjaThe recent COVID pandemic has shown major impact on public health and economic crisis. Despite the development of many vaccines and drugs against the severe acute respiratory syndrome (SARS) coronavirus 2, the pandemic still persists. The continued spread of the virus is largely driven by the emergence of viral variants such as α, β, γ, delta, epsilon spike, omicron and its subvariants (BA.1,2,3) which can evade the current vaccines...
-
Tam gdzie fikcja spotyka się z rzeczywistością
PublikacjaNa tyłach budynku A Wydziału Elektroniki, Telekomunikacji i Informatyki (tego z zerami i jedynkami na elewacji) mieści się laboratorium odmienne wyglądem od innych laboratoriów politechnicznych. Zajmuje ono sięgającą czwartego piętra czarną sześcienną kostkę dobudowaną 10 lat temu w bezpośrednim sąsiedztwie audytorium, któremu od dwóch lat patronuje doc. Marianna Sankiewicz, przysiadłszy na ławeczce przed jego wejściem. Wydaje...
-
Tailoring optical constants of few-layer black phosphorus coatings: Spectroscopic ellipsometry approach supported by ab-initio simulation
Publikacja2D black phosphorus (BP) has attracted extensive attention as an anisotropic platform for novel optoelectronic and polarizing optics applications. Insight into the factors that tune the optical and polarizing properties of 2D BP reveals their essential influence on BP-based photonic and optoelectronic devices. In this work, studies of the optical constants of few-layer black phosphorus coatings are studied and discussed, with particular...
-
Tailoring diamondised nanocarbon-loaded poly(lactic acid) composites for highly electroactive surfaces: extrusion and characterisation of filaments for improved 3D-printed surfaces
PublikacjaA new 3D-printable composite has been developed dedicated to electroanalytical applications. Two types of diamondised nanocarbons - detonation nanodiamonds (DNDs) and boron-doped carbon nanowalls (BCNWs) - were added as fillers in poly(lactic acid) (PLA)-based composites to extrude 3D filaments. Carbon black served as a primary filler to reach high composite conductivity at low diamondised nanocarbon concentrations (0.01 to 0.2...
-
Tailoring a low-energy ball milled MnCo2O4 spinel catalyst to boost oxygen evolution reaction performance
PublikacjaThe development of cost-efficient oxygen evolution reaction (OER) catalysts is one of the most important tasks facing modern techniques for hydrogen production. In this work, for the first time, a low-energy ball milling process of MnCo2O4 (MCO) spinel powders, with a mechanical modification time exceeding 1 day was used. After 6 days of ball-milling, the obtained overpotential of the electrocatalyst reached the value of 375 mV...
-
Tackling microplastics pollution in global environment through integration of applied technology, policy instruments, and legislation
PublikacjaMicroplastic pollution is a serious environmental problem that affects both aquatic and terrestrial ecosystems. Small particles with size of less than 5 mm, known as microplastics (MPs), persist in the environment and pose serious threats to various species from micro-organisms to humans. However, terrestrial environment has received less attention than the aquatic environment, despite being a major source of MPs that eventually...
-
Tacit knowledge acquisition & sharing, and its influence on innovations: A Polish/US cross-country study
PublikacjaThis study measures the relationship between tacit knowledge sharing and innovation in the Polish (n=350) and US (n=379) IT industries. Conceptually, the study identifies the potential sources of tacit knowledge development by individuals. That is, the study examines how “learning by doing” and “learning by interaction” lead to a willingness to share knowledge and, as a consequence, to support process and product/service innovation....
-
Szlifowanie na docierarkach tarczowych
PublikacjaPrzedstawiono technologie szlifowania powierzchni płaskich na docierarkach tarczowych. Omówiono stosowane narzędzia segmentowe, obrabiarki dwutarczowe i zalety mikroszlifowania. Porównano proces docierania konwencjonalnego luźnym ścierniwem z mikroszlifowaniem z kinematyką docierania.
-
Systemic analysis of a manufacturing process based on a small scale bakery
PublikacjaThe main aim of the article is to present two new innovative concepts of reliability of a functioning manufacturing system in the process of making bread in small-scale bakeries. Reliability is understood as one of the representations of an operator acting on specifc streams in time to - t. One of these represents the global reliability of a system as a function of parallel action of all the streams of the system in time to to...
-
Systematic Literature Review on Click Through Rate Prediction
PublikacjaThe ability to anticipate whether a user will click on an item is one of the most crucial aspects of operating an e-commerce business, and clickthrough rate prediction is an attempt to provide an answer to this question. Beginning with the simplest multilayer perceptrons and progressing to the most sophisticated attention networks, researchers employ a variety of methods to solve this issue. In this paper, we present the findings...
-
System waluty lokalnej dla wspierania zrównoważonych zachowań wśród mieszkańców Gdańska
PublikacjaNiniejszy artykuł ma na celu wprowadzenie do systemu alternatywnej waluty lokalnej, wspierającej zrównoważone działania, która jest rozwijana na terenie Gdańska pod marką PULA. System waluty alternatywnej jest wielostronną umową na używanie czegoś innego niż legalny środek płatniczy (np. pieniądz krajowy) jako medium wymiany. Jego stworzenie ma na celu łączenie niezaspokojonych potrzeb z nieużywanymi zasobami (Telalbasic, 2017)....
-
SYSTEM RADIOLOKALIZACYJNY OPARTY NA FARMIE TURBIN WIATROWYCH
PublikacjaW referacie zaproponowano wykorzystanie farmy turbin wiatrowych do budowy systemu radiolokalizacyjnego dla obiektów latających (samolotów). Zaproponowane rozwiązanie umożliwia oszacowanie położenia obiektu w przestrzeni, zwłaszcza w ruchu, za pomocą sygnałów lokalizacyjnych nadawanych asynchronicznie z wież turbin wiatrowych. Przedstawiono matematyczną analizę metody oraz wyniki badań symulacyjnych efektywności pracy rozwiązania...
-
System monitorowania korozji w instalacjach wodnych platformy wydobywczej Baltic Beta
PublikacjaRealizacja doktoratu rozwiązała problemy korozyjne w jednym ze strategicznych obszarów procesu eksploatacji ropy. Polegała na uruchomieniu monitoringu korozji w instalacji zatłaczającej wodę morską do złoża ropy, na platformie wydobywczej firmy LOTOS Petrobaltic. Wdrożono automatyczny system monitorowania korozji metodą polaryzacji liniowej, oszacowano korozyjność uzdatnionej wody, zidentyfikowano rodzaje korozji występujące w...
-
System Loss Model for Body-to-Body Networks in Indoor and Outdoor Environments
PublikacjaA system loss model for body-to-body networks in indoor and outdoor environments is proposed in this paper, based on measurements taken at 2.45 GHz. The influence of the type of environment, antenna visibility and user mobility on model parameters has been investigated. A significant impact of mutual antennas’ placement and their visibility is shown. The proposed model fits well to empirical data, with the average root mean square...
-
System Loss Model for Body Area Networks in Room Scenarios
PublikacjaThis paper presents an analysis of system loss in Body Area Networks for room scenarios, based on a wideband measurement campaign at 5.8 GHz. The measurements were performed with a fixed antenna transmitting vertically and horizontally polarised signals, while the user wears dualpolarised antennas. The average system losses in co- and crosspolarised channels are 41.4 and 42.6 dB for vertically polarised transmitted signals and...
-
SYNTHESIZING MEDICAL TERMS – QUALITY AND NATURALNESS OF THE DEEP TEXT-TO-SPEECH ALGORITHM
PublikacjaThe main purpose of this study is to develop a deep text-to-speech (TTS) algorithm designated for an embedded system device. First, a critical literature review of state-of-the-art speech synthesis deep models is provided. The algorithm implementation covers both hardware and algorithmic solutions. The algorithm is designed for use with the Raspberry Pi 4 board. 80 synthesized sentences were prepared based on medical and everyday...
-
Synthesis of π-extended and bowl-shaped sumanene–ferrocene conjugates and their application in highly selective and sensitive cesium cations electrochemical sensors
Publikacja -
Synthesis of Novel Arginine Building Blocks with Increased Lipophilicity Compatible with Solid-Phase Peptide Synthesis
Publikacja -
Synthesis of N-doped TiO2 nanoparticles with enhanced photocatalytic activity for 2,4-dichlorophenol degradation and H2 production
PublikacjaNitrogen-doped titanium dioxide (N-TiO2) nanoparticles were prepared using a modified sol-gel method. The as-prepared nanoparticles were characterized by state-of-the-art techniques for their optical, structural and morphological properties. The crystallite size, surface area and bandgap energy of reference TiO2 and N-TiO2 nanoparticles were found to be 16.1 and 10.9 nm, 83.6 and 131.8 m2 g−1 and 3.23 and 2.89 eV, respectively....
-
Synthesis of Cyano-Benzylidene Xanthene Synthons Using a Diprotic Brønsted Acid Catalyst, and Their Application as Efficient Inhibitors of Aluminum Corrosion in Alkaline Solutions
PublikacjaNovel cyano-benzylidene xanthene derivatives were synthesized using one-pot and condensation reactions. A diprotic Brønsted acid (i.e., oxalic acid) was used as an effective catalyst for the promotion of the synthesis process of the new starting xanthene–aldehyde compound. Different xanthene concentrations (ca. 0.1–2.0 mM) were applied as corrosion inhibitors to control the alkaline uniform corrosion of aluminum. Measurements were...
-
Synthesis of 3-(2-Alkylthio-4-chloro-5-methylbenzenesulfonyl)-2-(1-phenyl-3-arylprop-2-enylideneamino)guanidine Derivatives with Pro-Apoptotic Activity against Cancer Cells
PublikacjaThe untypical course of reaction between chalcones and benzenesulfonylaminoguanidines led to the new 3-(2-alkylthio-4-chloro-5-methylbenzenesulfonyl)-2-(1-phenyl-3-arylprop-2- enylideneamino)guanidine derivatives 8–33. The new compounds were tested in vitro for their impact on the growth of breast cancer cells MCF-7, cervical cancer cells HeLa and colon cancer cells HCT-116 by MTT assay. The results revealed that the activity of...
-
Synthesis, Characterization and Biological Investigations of Half-Sandwich Ruthenium(II) Complexes Containing Benzimidazole Moiety
PublikacjaHalf-sandwich Ru(II) complexes belong to group of biologically active metallo-compounds with promising antimicrobial and anticancer activity. Herein, we report the synthesis and characteri- zation of arene ruthenium complexes containing benzimidazole moiety, namely, [(η6-p-cymene)RuC l(bimCOO)] (1) and [(η6-p-cymene)RuCl2(bim)] (2) (where bimCOO = benzimidazole-2-carboxylate and bim = 1-H-benzimidazole). The compounds were characterized...
-
Synthesis, characterization, and application of 2D/2D TiO2-GO-ZnFe2O4 obtained by the fluorine-free lyophilization method for solar light-driven photocatalytic degradation of ibuprofen
PublikacjaIn this study, we report the potential of 2D/2D TiO2- GO-ZnFe2O4 photocatalyst obtained using the fluorine-free lyophilization technique for the degradation of ibuprofen belonging to the group of active pharmaceutical ingredients (API). The improved ibuprofen degradation under simulated solar light was achieved in the presence of a composite of 2D TiO2 combined with GO and embedded ZnFe2O4, which additionally provides superparamagnetic...
-
Synthesis, Antimicrobial and Mutagenic Activity of a New Class of d-Xylopyranosides
PublikacjaEight N-[2-(2′,3′,4′-tri-O-acetyl-α/β-d-xylopyranosyloxy)ethyl]ammonium bromides, a new class of d-xylopyranosides containing a quaternary ammonium aglycone, were obtained. Their complete structure was confirmed using NMR spectroscopy (1H, 13C, COSY and HSQC) and high-resolution mass spectrometry (HRMS). An antimicrobial activity against fungi (Candida albicans, Candida glabrata) and bacteria (Staphylococcus aureus, Escherichia...
-
Synthesis and application of biomass-derived magnetic biochar catalyst for simultaneous esterification and trans-esterification of waste cooking oil into biodiesel: modeling and optimization
PublikacjaThis work created, characterized, and used a magnetic biochar catalyst that is both eco-friendly and very effective. Sugarcane bagasse was selected as primary raw material for catalyst preparation, because it is renewable and ecofriendly biomass. Cata- lyst created by doping sugarcane bagasse biochar with magnetic material in the form of (FeSO 4 ·7H 2 O). Thermogravimetric Analysis (TGA) and Fourier Transform Infrared spectroscopy...