displaying 1000 best results Help
Search results for: VARIABLE-RESOLUTION MODELING
-
Comparative modeling of shear localization in granular bodies with FEM and DEM
PublicationThe intention of the paper is to compare the calculations of shear zones in granular bodies using two different approaches: a continuum and a discrete one. In the first case, the FEM based on a micro-polar hypoplastic constitutive law was used. In the second case, the DEM was taken advantage of, where contact moments were taken into account to model grain roughness. The comparative calculations were performed for a passive case...
-
Modeling of the behavior of granular bodies using DEM with contact moments
PublicationW artykule przedstawiono wyniki symulacji badania trójosiowego dla materiałów granulowanych. Obliczenia wykonano przy zastosowaniu metody DEM. Pokazano wpływ momentów kontaktowych na wytrzymałość próbki. Zbadano wpływ parametrów mikroskopowych.
-
Numerical modeling of shear localizations during granular flow in silos.
PublicationW artykule przedstawiono wyniki numerycznej analizy MES dotyczącej przepływów materiałów sypkich w silosach. Omówiono różne metody opisu lokalizacji odkształceń stycznych wewnątrz materiałów. Wyniki porónano z wynikami doświadczalnymi.
-
Modeling and simulation of blood flow under the influence of radioactive materials having slip with MHD and nonlinear mixed convection
PublicationRadioactive materials are widely in industry, nuclear plants and medical treatments. Scientists and workers in these fields are mostly exposed to such materials, and adverse effects on blood and temperature profiles are observed. In this regard, objective of the current study is to model and simulate blood based nanofluid with three very important radioactive materials, named as Uranium dioxide (UO2), Thorium dioxide (ThO2) and...
-
On Computationally-Efficient Reference Design Acquisition for Reduced-Cost Constrained Modeling and Re-Design of Compact Microwave Passives
PublicationFull-wave electromagnetic (EM) analysis has been playing a major role in the design of microwave components for the last few decades. In particular, EM tools allow for accurate evaluation of electrical performance of miniaturized structures where strong cross-coupling effects cannot be adequately quantified using equivalent network models. However, EM-based design procedures (parametric optimization, statistical analysis) generate...
-
Sławomir Jerzy Ambroziak dr hab. inż.
PeopleSławomir J. Ambroziak was born in Poland, in 1982. He received the M.Sc., Ph.D. and D.Sc. degrees in radio communication from Gdańsk University of Technology (Gdańsk Tech), Poland, in 2008, 2013, and 2020 respectively. Since 2008 he is with the Department of Radiocommunication Systems and Networks of the Gdańsk Tech: 2008-2013 as Research Assistant, 2013-2020 as Assistant Professor, and since 2020 as Associate Professor. He is...
-
Modeling Earth Systems and Environment
Journals -
Discussion of “Design Process of Asphalt Mixture Incorporating Compaction-Effort Variable” by Yining Zhang, Lijun Sun, and Dong Luo
Publication -
Variable-temperature X-ray diffraction study of structural parameters of NH---S hydrogen bonds in triethylammonium and pyridinium silanethiolates
PublicationHydrogen bonds in triethylammonium and pyridinium silanethiolate salts have been characterized by X-ray, FT–IR and NMR spectroscopies. DFT calculations reveal strongly asymmetric double-well minima at the potential energy curves of the studied compounds
-
A New Phenylalanine Derivative Acts as an Antagonist at the AMPA Receptor GluA2 and Introduces Partial Domain Closure: Synthesis, Resolution, Pharmacology, and Crystal Structure
Publication -
Enantiomeric Resolution of N,N'-Dimethyldithiodianthranilide through Diastereomeric silver(I) complex. Chiroptical spectra, racemization barrier and molecular self-assembly
PublicationN,N'-dimetyloditiodiantranilid, związek o chiralności płaszczyznowej, rozdzielono na enancjomery. Optycznie czynne molekuły uzyskano w wyniku tworzenia chiralnego kompleksu N,N'-dimetyloditiodiantranilidu z solą srebrową kwasu (1S)-kamforosulfonowego. W oparciu o badania rentgenostrukturalne monokryształu uzyskanego kompleksu określono absolutną konfigurację przykoordynowanego ligandu jako (R). Enancjomery N,N'-dimetyloditiodiantranilid...
-
The evaluation of COD fractionation and modeling as a key factor for appropriate optimization and monitoring of modern cost-effective activated sludge systems
PublicationA study was conducted to characterize the raw wastewater entering a modern cost effective municipal WWTP in Poland using two approaches; 1) a combination of modeling and carbonaceous oxygen demand (COD) fractionation using respirometric test coupled with model estimation (RTME) and 2) flocculation/filtration COD fractionation method combined with BOD measurements (FF-BOD). It was observed that the particulate fractions of COD obtained...
-
Mathematical modeling and prediction of pit to crack transition under cyclic thermal load using artificial neural network
PublicationThe formation of pitting is a major problem in most metals, which is caused by extremely localized corrosion that creates small holes in metal and subsequently, it changes into cracks under mechanical load, thermo-mechanical stress, and corrosion process factors. This research aims to study pit to crack transition phenomenon of steel boiler heat tubes under cyclic thermal load, and mathematical modeling...
-
Discourse Anaphora and Anaphor Resolution Colloquium
Conferences -
Geometry Modeling and Processing
Conferences -
Estimation of groundwater recharge in a shallow sandy aquifer using unsaturated zone modeling and water table fluctuation method
PublicationQuantification of groundwater recharge is one of the most important issues in hydrogeology, especially in view of the ongoing changes in climate and land use. In this study, we use numerical models of 1D vertical flow in the vadose zone and the water table fluctuation (WTF) analysis to investigate local-scale recharge of a shallow sandy aquifer in the Brda outwash plain in northern Poland. We show that these two methods can be...
-
ACM Transactions on Modeling and Performance Evaluation of Computing Systems
Journals -
Energy Systems-Optimization Modeling Simulation and Economic Aspects
Journals -
Metabolic activity of tree saps of different origin towards cultured human cells in the light of grade correspondence analysis and multiple regression modeling
PublicationTree saps are nourishing biological media commonly used for beverage and syrup production. Although the nutritional aspect of tree saps is widely acknowledged, the exact relationship between the sap composition, origin, and effect on the metabolic rate of human cells is still elusive. Thus, we collected saps from seven different tree species and conducted composition-activity analysis. Saps from trees of Betulaceae, but not from...
-
Modeling the Customer’s Contextual Expectations Based on Latent Semantic Analysis Algorithms
PublicationNowadays, in the age of Internet, access to open data detects the huge possibilities for information retrieval. More and more often we hear about the concept of open data which is unrestricted access, in addition to reuse and analysis by external institutions, organizations and people. It’s such information that can be freely processed, add another data (so-called remix) and then published. More and more data are available in text...
-
Thermal-FSI modeling of flow and heat transfer in a heat exchangerbased on minichanels
PublicationIn this paper selected numerical modelling problems for an advanced thermal-FSI ("Fluid Solid Interaction") mini-channel heat exchanger model are presented. Special attention is given to the heat transfer between the separated mediums for different mass flows. Similar modelling problems have also been discussed in the literature dedicated to numerical and theoretical modelling problems for typical heat exchangers [1, 2, 3]. Basic...
-
Low-Cost Flight Simulator with Possibility of Modeling of Flight Controls Failures
PublicationThe goal of this paper is to present a development of a low cost flight simulator, that allows to simulate flight controls failures. Cessna 172 has been chosen as an example of a general aviation aircraft and the flight model has been implemented in Simulink. The model allows for easy integration of an experimental autopilot, using various strategies. Aerodynamic coefficients have been calculated using software called DATCOM. Such...
-
Wind Turbines Modeling as the Tool for Developing Algorithms of Processing their Video Recordings
PublicationIn the real world, many factors exist disturbing observation of the examined phenomena and causing various noises and distortions in recorded signals. It very often makes it difficult or even impossible to optimize various signal processing algorithms, through finding appropriate parameters. In this paper, we show an application, that retrieves wind turbine rotor speed from recorded video. Next, we describe the process of reduction...
-
Process modeling inside cylinder in an internal combustion engine with heat regeneration
Publication -
Improving peak detection by Gaussian mixture modeling of mass spectral signal
Publication -
Probabilistic approach of the Upper and Middle Odra basin daily rainfall modeling
Publication -
Inverse Modeling and Optimization of CSRR-based Microwave Sensors for Industrial Applications
PublicationDesign optimization of multivariable resonators is a challenging topic in the area of microwave sensors for industrial applications. This paper proposes a novel methodology for rapid re-design and parameter tuning of complementary split-ring resonators (CSRRs). Our approach involves inverse surrogate models established using pre-optimized resonator data as well as analytical correction techniques to enable rapid adjustment of geometry...
-
Modeling of cutter displacements during ball end milling of inclined surfaces
Publication -
Application of Capillary Polypropylene Membranes for Microfiltration of Oily Wastewaters: Experiments and Modeling
Publication -
Selected aspects of customization of cognitive dimensions for evaluation of visual modeling languages.
PublicationFor the successful application of diagrams in software engineering, high quality visual modelling languages (VML) are required. There is a need for new effective methodologies of VML evaluation. This paper discusses selected aspects of applying cognitive dimensions as a basis of the evaluation. Then, it briefly presents CD-VML methodology which integrates the cognitive dimensions with a theory of visual modelling languages. Finally,...
-
Modeling incipient creep damage effects on Barkhausen noise and magnetoacoustic emission.
PublicationZaproponowano model fizyczny opisujący zmiany natężenia efektu Barkhausena i emisji magnetoakustycznej podczas procesu degradacji stali ekploatowanych w przemyśle energetycznym.
-
Modeling of unsaturated water flow in double-porosity soils by the homogenization approach.
PublicationGrunty o podwójnej porowatości zbudowane są z dwóch materiałów o znacznie różniących się parametrach hydraulicznych. Ze względu na tą szczególną strukturę, podczas przepływu nieustalonego w tego typu gruntach wytwarzają się lokalne różnice ciśnienia kapilarnego. W artykule przedstawiono model przepływu w gruntach o podwójnej porowatości w skali makroskopowej z uwzględnieniem efektów lokalnych. Model otrzymano metodą homogenizacji....
-
Modeling of Heat Source Based on Parameters of Electron Beam Welding Process
Publication -
Modeling human thinking about similarities by neuromatrices in the perspective of fuzzy logic
Publication -
Preventing Work-Related Musculoskeletal Disorders in Manufacturing by Digital Human Modeling
Publication -
Monte-Carlo Modeling of Optical Sensors for Postoperative Free Flap Monitoring
PublicationThis work aims to develop a numerical tissue model and implement software to simulate photon propagation using the Monte Carlo method to determine design guidelines for a physical measurement system. C++ was used for the simulation program, and Python as a programming environment to create an interface that allows the user to customize individual simulation elements, allowing for increased accuracy and flexibility when simulating...
-
5G/6G optical fronthaul modeling: cost and energy consumption assessment
PublicationIn fifth generation (5G) and the future beyond 5G (6G) radio access networks (RANs), the cost of fronthaul deployment is a main challenge for mobile network operators. Depending on different constraints, there are various solutions to deploy an efficient fronthaul. Fiber-optic-based fronthaul offers long-term support with regard to a rapid increase in capacity demands. When fiber connections, either point-to-point (P2P) or point-to-multipoint...
-
The effect of elevated temperature on LCF damage growth in 2024AA – Experiment and modeling
PublicationThis paper presents the results of experimental low-cycle fatigue (LCF) tests conducted on EN-AW 2024 alloy in T3511 temper at 100 ◦C, 200 ◦C and 300 ◦C. The material’s basic fatigue characteristics were determined, such as fatigue life curve and cyclic strain curve. Both the hysteresis loop and nature of fracture surfaces obtained in macro- and microscopic observations (scanning electron microscope, SEM) were accounted for. The...
-
Efficient modeling of the time-domain crosstalk phenomena in coupled microstrip lines
PublicationW pracy przedstawiono efektywną technikę analizy zjawiska przesłuchu w sprzężonych liniach mikropaskowych. Analiza uwzględnia hybrydową naturę prowadzonych fal i prowadzi do określenia postaci czasowych sygnałów na zaciskach struktury w zależności od parametrów układu linii sprzężonych oraz własności obciążeń. Wyniki analizy zweryfikowano poprzez porównanie z wynikami badań eksperymentalnych, uzyskując bardzo dobrą zgodność.
-
Accidental wow evaluation based on sinusoidal modeling and neural nets prediction
PublicationReferat przedstawia opis algorytmu do określenia charakterystyki zniekształcenia kołysania dźwięku. Prezentowane podejście wykorzystuje sinusoidalną analizę dźwięku bazującą zarówno na amplitudowym jak i fazowym widmie sygnału fonicznego. Trajektorie poszczególnych składowych tonalnych, obrazujące zniekształcenie kołysania, określane są na podstawie analizy ich chwilowych amplitud, częstotliwości i faz. Dodatkowo referat przedstawia...
-
Stress Relaxation Behaviour Modeling in Rigid Polyurethane (PU) Elastomeric Materials
PublicationPolyurethane (PU) has been used in a variety of industries during the past few years due to its exceptional qualities, including strong mechanical strength, good abrasion resistance, toughness, low-temperature flexibility, etc. More specifically, PU is easily “tailored” to satisfy particular requirements. There is a lot of potential for its use in broader applications due to this structure–property link. Ordinary polyurethane items...
-
Analysis and modeling of variables of the precise shredder’s pneumatic material transport’s system
Publication -
A Modeling Problem of a Continuous-Time Domain Signal and Its Discrete Counterpart
Publication -
Two dimensional modeling of the flood zones in the Vistula river valley in Warsaw
PublicationPrzedstawiono metodę numerycznego wyznaczania stref zagrożenia powodziowego. Transformację fali powodziowej symulowano, używając dwuwymiarowych równań de Saint-Venanta. Zasięg zalewu i strefy zagrożenia powodziowego przedstawiono w systemie GIS. Wykonano analizę zagrożenia powodziowego w dolinie Wisły w Warszawie.
-
Noise modeling of static CMOS gates for low-noise circuit synthesis
PublicationW artykule przedstawiono efektywną metodę modelowania widma szumu napięcia zasilającego generowanego przez statyczne bramki cyfrowe CMOS. Metoda modelowania uwzględnia krótkie impulsy prądowe powstające w czasie przełączania bramek i pozwala oszacować górne limity widma szumu napięcia zasilającego co umożliwia niskoszumową syntezę układów cyfrowych.
-
Ultracapacitor modeling and control with discrete fractional order artificial neural network
Publication -
Modeling of CO Accumulation in the Headspace of the Bioreactor during Organic Waste Composting
Publication -
OmicSelector: automatic feature selection and deep learning modeling for omic experiments
Publication -
Modeling of chromatographic lipophilicity of food synthetic dyes estimated on different columns
PublicationBadano parametry retencyjne wybranych syntetycznych barwników żywności z wykorzystaniem techniki RP-HPLC z wykorzystaniem kolumn z chemicznie modyfikowanym wypełnieniem typu C-8, C-16, C-18 oraz CN.Uzyskane wyniki mogą być podstawą do stwierdzenia, że badane związki charakteryzują się podobnymi parametrami retencyjnymi w stosunku do kolumn z fazą stacjonarną typu C-8, C-16 oraz C-18.
-
Molecular modeling of amphotericin B - ergosterol primary complex in water II
PublicationPrezentowane badania dotyczą oddziaływania antybiotyku polienowego anfoterycyny B (AmB) i ergosterolu (ERG) (typowego sterolu błonowego komórek grzybowych) na poziomie molekularnym. W odróżnieniu od badanego poprzednio kompleksu binarnego analizowany obecnie kompleks AnB/ERG/AmB charakteryzuje się zdecydowanie wiekszą stabilnością i wzglednie sztywną, sandwiczową geometrią. Za trwałość i geometrie kompleksu odpowiedzialne są oddziaływania...