Search
Search results for: design method
-
Analytical design method of reverse curves
PublicationThe paper deals with a new approach relating to the design of the region of railway track direction alteration adapted to Mobile Satellite Measurements technique. The method may be particularly useful in situations when both the straights of the route directions cannot be connected in an elementary way using a circular arc with transition curves; this also refers to the application of a compound curve. Thus the only solution becomes...
-
Extending transition curve in analytical design method
PublicationThe paper presents the problem of extending the transitional curves, using for this purpose an analytical design method. The basis for the analysis of numerical calculations were carried out for a wide set of parameters characterizing the standard geometric system. We considered an importance of the size of radius of the circular arc and return angle of route on the obtained results after the formulation of appropriate theoretical...
-
Analytical design method for widening the intertrack space
PublicationThe paper involved the issue of arching of the railway turnouts. This is an issue which is given relatively less attention to scientific and research activities. Reference has been made to the book by Wladyslaw Rzepka, under the title „Curved turnouts in plan and profile”, which has been used in Poland for more than 50 years as the main source of information relating to the turnouts on the curve. The book is a compilation of elaborations...
-
Arching of railway turnouts by analytical design method
PublicationThe paper involved the issue of arching of the railway turnouts. This is an issue which is given relatively less attention to scientific and research activities. Reference has been made to the book by Wladyslaw Rzepka, under the title „Curved turnouts in plan and profile”, which has been used in Poland for more than 50 years as the main source of information relating to the turnouts on the curve. The book is a compilation of elaborations...
-
A diplexer design method using an augmented channel filter approach
PublicationContinuous development in RFID andmicrocontrollers technologies gives new possibilities to createsystems that are able to integrate a lot of sensors based ondifferent technologies. This integration brings us closer to realizethe Ubiquitous Network Society vision. However, many problemsmust be addressed before we will benefit from such systems. Inthis paper we describe concept of integrating RFID technologywith other sensors technologies...
-
The analytical design method of railway route’s main directions intersection area
PublicationThe paper presents a design method related to railway track sections situated in a bend. In the method advantage is taken of an analytical form of description by using appropriate mathematical formulae. This may becomeparticularly usefulwhen the investigations are based on the data obtained from mobile satellite measurements. In the paper attention is concentrated on an universal approach creating an opportunity to diversify the...
-
Smart Cities System Design Method Based on Case Based Reasoning
PublicationThe objective of this paper is to present the results of research carried out to develop a design method for Smart Cities systems. The method is based on the analysis of design cases of Smart Cities systems in cities, the selection of the city appropriate to the requirements for implementation and application. The Case Based Reasoning method was used to develop the proposed design methodology, along with mechanisms of the conversion...
-
Study the impact of design method preference on the usefulness of concrete and on CO2 emissions
PublicationPurpose – The research investigates the impact of concrete design methods on performance, emphasizing environmental sustainability. The study compares the modified Bolomey method and Abrams’ law in designing concretes. Significant differences in cement consumption and subsequent CO2 emissions are revealed. The research advocates for a comprehensive life cycle assessment, considering factors like compressive strength, carbonation...
-
Blade Section Prpfile Array Lifting Surface Design Method for Marine Screw Propeller Blade
PublicationThe lifting surface model is widely used in screw propeller design and analysis applications. It serves as a reliable tool for determination of the propeller blade mean line and pitch distribution. The main idea of this application was to determine the blade shape that would satisfy the kinematic boundary condition on its surface with the prescribed bound circulation distribution over it. In this paper a simplified lifting surface...
-
Hydraulic valve design methodology for hydro turbine control system
PublicationThe control of the turbine and its equipment in a hydroelectric power plant requires the HPU (hydraulic power unit) to deliver large volumes of working fluid in a short time at specific optimum control parameters. The use of typical proportional flow control valves created by manufacturers of hydraulic components in low-pressure control systems is disadvantageous due to high pressure losses in the control chambers. This paper presents...
-
Cost-Efficient Design Methodology for Compact Rat-Race Couplers
PublicationIn this article, a reliable and low-cost design methodology for simulation-driven optimization of miniaturized rat-race couplers (RRCs) is presented. We exploit a two-stage design approach, where a composite structure (a basic building block of the RRC structure) is first optimized using a pattern search algorithm, and, subsequently, the entire coupler is tuned by means of surrogate-based optimization (SBO) procedure. SBO is executed...
-
COMBINING FUNCTIONAL AND AESTHETIC ASPECTS OF DAYLIGHTING IN SUSTAINABLE ARCHITECTURE WITH THE USE OF DIGITAL DESIGN METHODS
PublicationThe aesthetics of modern architecture should relate to its origins and goals - the environment, function, sustainability and its users. One of the conditions that meet the criteria is the presence of daylight and the use of its potential. The contemporary digital tools that support the design process allow to controlling the use of difficult and capricious materials, such as daylight. They also combine daylighting aspects with...
-
Application of Taguchi L16 design method for comparative study of ability of 3A zeolite in removal of Rhodamine B and Malachite green from environmental water samples
Publication -
Design Methodology for Small Passenger Ships On the Example of the Ferryboat Motława 2 Driven by Hybrid Propulsion System
PublicationDynamic development in practically all elds of science and engineering has not passed over shipbuilding . In last years , engineers got to their use computer soware which makes it possible to perform strength and hydrodynamic calculations as well as to visualize design projects in 3 D space [1-4]. At their disposal they have full spectrum of modern solutions associated with the use of advanced materials and technologies [5-7]....
-
Sequential Analysis-Design Methods and Applications
Journals -
IPSJ Transactions on System LSI Design Methodology
Journals -
Simultaneous elimination of Malachite Green, Rhodamine B and Cresol Red from aqueous sample with Sistan sand, optimized by Taguchi L16 and Plackett–Burman experiment design methods
Publication -
Multicriteria optymization method for yacht design
PublicationArtykuł dotyczy optymalizacji wielokryterialnej projektowania innowacyjnego systemu jachtowego w taki sposób by osiągnąć polepszone zachowanie dynamiczne w dowolnych warunkach nawigacji morskiej. W artykule skoncentrowano się na komputerowej symulacji, modelowaniu i optymalizacji matematycznego modelu jachtu w różnych warunkach żeglowania w celu poprawy zdolności manewrowania i zwiększenia szybkości. Przeprowadza się symulację...
-
Research project: CAD. Integrated archictural design + Methodology of scientific work 2022/2023
e-Learning CoursesKurs e-learningowy stanowi uzupełnienie zajęć stacjonarnych Projekt Naukowy (Techniki Komputerowe i Metodyka Pracy Naukowej) dla studentów II stopnia (2 semestr) Zajęcia dotyczą zastosowania środowiska GIS i oprogramowania BIM oraz odpowiednich metod naukowych w procesie projektowania i przekształcania obszarów waterfrontów.
-
2D inverse method of turbomachinery stage design
Publication1. How 2D model for turbomachinery stages has developed historically. 2. Recent understanding of physical background of 2D model. 3. Curvilinear system of non-orthogonal coordinates in the application to 2D model. 4. Set of basic equations. 5. Closing conditions for the inverse problem. 6. Examples of solutions a)
-
Simplified method of water cooled exhaust system design.
PublicationThe water cooled exhaust systems are not often used onboard ships. Prime goal is to lower temperature of exhaust gas from main propulsion and auxiliary engines to the defined limit. The design of such systems require detailed analysis of propulsion system operational parameters to meet designer expectations. The paper outlines the cooled exhaust system design problems in specific application. The simplified method of evaluation...
-
Use of the AHP Method for Preference Determination in Yacht Design
PublicationA sailing yacht is a human-centred product, the design of which revolves primarily around the wants and desires of the future owner. In most cases, these preferences are not measurable, such as a personal aesthetic feeling, or a need for comfort, speed, safety etc. The aims of this paper are to demonstrate that these preferences can be classified and represented numerically, and to show that they are correlated with the type...
-
Use of the AHP Method for Preference Determination in Yacht Design
PublicationA sailing yacht is a human-centred product, the design of which revolves primarily around the wants and desires of the future owner. In most cases, these preferences are not measurable, such as a personal aesthetic feeling, or a need for comfort, speed, safety etc. The aims of this paper are to demonstrate that these preferences can be classified and represented numerically, and to show that they are correlated with the type of...
-
Two dimensional inverse method of turbomachinery stage design
PublicationW artykule przedstawion rys historyczny dotyczący modelu osiowo-symetrycznego w zastosowaniu do maszyn wirnikowych. Została sformułowana metoda rozwiązywania zadania odwrotnego polegaająca na znajdywaniu powierzchni będfącej obrazem łopatki w osiowo symetrycznym modelu maszyny wirnikowej. Zaprezentowano przykłady zastosowania tej metody w odniesieniu do łopatki kierowniczej turbiny, spreżarki promieniowej oraz pompo-turbiny.
-
A novel degree-hour method for rational design loading
PublicationCooling degree-hours (CDH) received the broadest application in evaluation of the ambient air cooling efficiency in power engineering (engine intake air cooling systems) and air conditioning. The current CDH numbers are defined as a drop in air temperature multiplied by associated time duration of performance and their summarized annual number is used to estimate the annual effect achieved due to sucked air cooling in power plants...
-
FIR Filter Design Using Distributed Maximal Flatness Method
PublicationIn the paper a novel method for filter design based on the distributed maximal flatness method is presented. The proposed approach is based on the method used to design the most common FIR fractional delay filter - the maximally flat filter. The MF filter demonstrates excellent performance but only in a relatively narrow frequency range around zero frequency but its magnitude response is no greater than one. This ,,passiveness”...
-
A method of the UMTS-FDD network design based on universal load characteristics
PublicationIn the paper an original method of the UMTS radio network design was presented. The method is based on simple way of capacity-coverage trade-off estimation for WCDMA/FDD radio interface. This trade-off is estimated by using universal load characteristics and normalized coverage characteristics. The characteristics are useful for any propagation environment as well as for any service performance requirements. The practical applications...
-
Design of dimensionally stable composites using efficient global optimization method
PublicationDimensionally stable material design is an important issue for space structures such as space laser communication systems, telescopes, and satellites. Suitably designed composite materials for this purpose can meet the functional and structural requirements. In this paper, it is aimed to design the dimensionally stable laminated composites by using efficient global optimization method. For this purpose, the composite plate optimization...
-
Gain deficit effect in the fractional delay filter design by the window method
PublicationMetoda okien jest sposobem szybkiego i skutecznego projektowania filtrów ułamkowoopóźniających. Jednakże wzmocnienie tak zaprojektowanego filtru różni się od zakładanej wartości idealnej. To zjawisko, nazywane deficytem wzmocnienia, negatywnie wpływa na jakoś projektowanego filtru. Artykuł poświęcono wynikom badań oraz metodom korekcji tego problemu. Omówiono wpływ współczynnika korekcji deficytu wzmocnienia na charakterystykę...
-
Design of dimensionally stable composites using efficient global optimization method
Publication -
A New Adaptive Method for the Extraction of Steel Design Structures from an Integrated Point Cloud
Open Research DataA new automatic and adaptive algorithm for edge extraction from a random point cloud was developed and presented herein. The proposed algorithm was tested using real measurement data. The developed algorithm is able to realistically reduce the amount of redundant data and correctly extract stable edges representing the geometric structures of a studied...
-
A method for the three-dimensional and synchronous resolution of functional and spatial matters in architectural design
PublicationThe article discusses the issue of applied methods of teaching architectural design at Polish universities. The authors review the common methods based on conceptual drawings solving design problems in only two dimensions. After completing the floor plans' sketching process carried out in 2D way the 3D virtual models are made - seldom cardboard mock-ups - to illustrate the final spatial form of the designed object. At the Faculty...
-
A Generalized SDP Multi-Objective Optimization Method for EM-Based Microwave Device Design
PublicationIn this article, a generalized sequential domain patching (GSDP) method for efficient multi-objective optimization based on electromagnetics (EM) simulation is proposed. The GSDP method allowing fast searching for Pareto fronts for two and three objectives is elaborated in detail in this paper. The GSDP method is compared with the NSGA-II method using multi-objective problems in the DTLZ series, and the results show the GSDP method...
-
A New Adaptive Method for the Extraction of Steel Design Structures from an Integrated Point Cloud
PublicationThe continuous and intensive development of measurement technologies for reality modelling with appropriate data processing algorithms is currently being observed. The most popular methods include remote sensing techniques based on reflected-light digital cameras, and on active methods in which the device emits a beam. This research paper presents the process of data integration from terrestrial laser scanning (TLS) and image data...
-
A method for predicting propeller-hull interaction, applicable to preliminary design of inland waterways ships
PublicationW pracy przedstawiono propozycje metody parametrycznej służącej do prognozowania charakterystyk strumienia nadążającego i ssania kadłuba okrętu o zanurzeniu bliskim głębokości akwenu. Metoda umożliwia uwzględnienie wpływu małej głębokości akwenu przy wstępnym doborze parametrów układu napędowego statków przeznaczonych do eksploatacji na wodach płytkich, np. statków śródlądowych. Model matematyczny zagadnienia wyznaczono uwzględniając...
-
On a risk-based method for safety assessment of a ship in critical conditions at the preliminary design stage.
PublicationW pracy przedstawiono wybrane rezultaty badań na temat metody oceny bezpieczeństwa statków w warunkach krytycznych, na etapie projektu wstępnego. Podano główne założenia nowoczesnego podejścia do oceny bezpieczeństwa statków. Przedstawiono opis metody do projektowania statków dla bezpieczeństwa, w warunkach krytycznych. Opisano główne elementy modelu obliczeniowego. Podano wybrane wyniki obliczeń. Opisano propozycje dalszych badań.
-
Passive Variable Fractional Delay Filter Design using Distributed Maximal Flatness Method
PublicationW pracy przedstawiono nową metodę projektowania pasywnych filtrów ułakowoopóźniających opartą na metodzie rozproszonej maksymalnej płaskości. W zaproponowane podejście jest uogólnieniem najbardziej popularnej metody projektowania filtrów maksymalnie płaskich - metody projektowania filtrów maksymalnie płaskich. Filtr maksymalnie płaski cechuje bardzo dobra jakość jedynie w wąskim paśmie wokół częstotliwości zerowej, ale jego istotną...
-
Regression points in non-intrusive polynomial chaos expansion method and D-optimal design
PublicationThe paper addresses selected issues of uncertainty quantification in the modelling of a system containing surgical mesh used in ventral hernia repair. Uncertainties in the models occur e.g. due to variability of abdominal wall properties among others. In order to include them, a non-intrusive regression-based polynomial chaos expansion method is employed. Its accuracy depends on the choice of regression points. In the study a relation...
-
Non-places in the centre of the historic Main Town in Gdansk? – Design Thinking as a method of solving problems in cities
PublicationThe interiors of reconstructed extensive blocks of the historic Main Town in Gdansk are nowadays degraded areas, full of cars, with “holes” after never-finished archaeological excavations. It is not surprising that inhabitants avoid them. These are NON-PLACES. This situation prompts social movements to act. The first step towards the change was the interdisciplinary and transdisciplinary project of revitalization of one of the...
-
HPLC–MS/MS method for dexmedetomidine quantification with Design of Experiments approach: application to pediatric pharmacokinetic study
Publication -
Finite element method (FEM) implementation in some chosen areas in dental tytanium-ceramic crown design
PublicationAnaliza rozkładu naprężeń wykazała, że szczególnie duże spiętrzenia naprężeń powstają w częściach przyszyjkowych tytanowo-ceramicznej korony stomatologicznej. W przyszyjkowej części modelu występują największe naprężenia rozciągające, szczególnie niebezpieczne dla ceramiki nieodpornej na tego typu obciążenia. Mogą one stanowić przyczynę spękania i odprysków w części przyszyjkowej korony. Wyniki symulacji komputerowej metodą MES...
-
Simple method for two-dimensional deadbeat controller design from N ˙ M impulse response values
Publication -
A multi-level risk-based method for safety assessment of ships in critical conditions. Option for preliminary design
PublicationW pracy przedstawiono wybrane informacje na temat metody oceny bezpieczeństwa statków w warunkach krytycznych. Metoda umożliwia wielokryterialne i wieloparametryczne badanie bezpieczeństwa statków, w celu otrzymania wymaganego i optymalnego poziomu bezpieczeństwa. W metodzie wykorzystano podejście do projektowania oparte o ocenę osiągów statku i ocenę ryzyka. Istnieje możliwość dostosowania metody do oceny bezpieczeństwa statku...
-
Design and Synthesis of NTU-9/C3N4 Photocatalysts: Effects of NTU-9 Content and Composite Preparation Method
PublicationHybrid materials based on graphitic carbon nitride (g-C3N4) and NTU-9 metal–organic frameworks (MOF) were designed and prepared via solvothermal synthesis and calcination in air. The as-prepared photocatalysts were subsequently characterized using Brunauer–Emmett–Teller (BET) analysis, UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL) emission spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy...
-
Inverse method for 2D viscous flow design problem using stream-function coordinates for axisymmetric model
PublicationOpracowano metodę odwrotną dla przepływów lepkich nieściśliwych w osiowosymetrycznej konfiguracji. Użyto współrzędnych funkcji prądu mających tą właściwość, iż możliwe jest zastapienie jednej współrzędnej geometrycznej zmienną zależną od prędkości przepływu. W związku z czym możliwe jest rozwiązanie zadania projektowego. Metodę rozwiązano numerycznie dla przypadku testowego jak i pokazano możliwości metody dla bardziej skomplikowanego...
-
A method for optimizing potential-energy functions by a hierarchical design of the potential-energy landscape: Application to the UNRES force field
Publication -
An Efficient Framework For Fast Computer Aided Design of Microwave Circuits Based on the Higher-Order 3D Finite-Element Method
PublicationIn this paper, an efficient computational framework for the full-wave design by optimization of complex microwave passive devices, such as antennas, filters, and multiplexers, is described. The framework consists of a computational engine, a 3D object modeler, and a graphical user interface. The computational engine, which is based on a finite element method with curvilinear higher-order tetrahedral elements, is coupled with built-in...
-
PRELIMINARY FIELD TESTS AND LONG-TERM MONITORING AS A METHOD OF DESIGN RISK MITIGATION: A CASE STUDY OF GDAŃSK DEEPWATER CONTAINER TERMINAL
PublicationAppropriate risk assessment plays a fundamental role in the design. . The authors propose a possible method of design risk mitigation, which follows recommendations included in Eurocode 7. The so-called “Observational Method” (OM) can produce savings in costs and programmes on engineering projects without compromising safety. The case study presented is a complex design solution that deals with the heavy foundations of a gantry...
-
Optimization of the UNRES Force Field by Hierarchical Design of the Potential-Energy Landscape. 2. Off-Lattice Tests of the Method with Single Proteins
Publication -
Application of computer assisted modified coupled mode method for the design of polarimetric sensors. Optical Fibres and Their Applications VIII. Białowieża 23-26 stycznia 2002. Ed. J. Dorosz, R.S. Romaniuk. Wykorzystanie zmodyfikowanej metody modów sprzężonych wspomaganej komputerem do projektowania sensorów polarymetrycznych.
PublicationW pracy przedstawiono rozszerzenie zmodyfikowanej metody modów sprzężonych,dzięki, któremu możliwe jest modelowanie szerokiej klasy światłowodów poddanych jednoczesnemu działaniu wielu zaburzeń. W metodzie tej dokonuje się numerycznego rozwiązania równania modów sprzężonych, w wyniku czego możliwa jest analiza przypadków, w których współczynniki sprzężenia modów nie są stałe wzdłuż światłowodu. W wyniku umiejętnej modyfikacji...