Wyszukiwarka
Wyniki wyszukiwania dla: SYSTEMATIC REVIEW
-
TESTING CONTRACTION AND THERMAL EXPANSION COEFFICIENT OF CONSTRUCTION AND MOULDING POLYMER COMPOSITES
PublikacjaThe paper presents results of systematic tests of contraction and thermal expansion coefficients of materials based on polymer composites. The information on the above material properties is essential both at the design stage and during the use of finished products. Components for the samples were selected in such a way as to represent typical materials used for production of construction and moulding elements. The performed tests...
-
Overview of Approaches for Compensating Inherent Metamaterials Losses
PublikacjaMetamaterials are synthetic composite structures with extraordinary electromagnetic properties not readily accessible in ordinary materials. These media attracted massive attention due to their exotic characteristics. However, several issues have been encountered, such as the narrow bandwidth and inherent losses that restrict the spectrum and the variety of their applications. The losses have become the principal limiting factor...
-
STUDY OF SEASONAL ACOUSTIC PROPERTIES OF SEA WATER IN SELECTED WATERS OF THE SOUTHERN BALTIC
PublikacjaClimate Research of the globe is a current task, in particular to confirm the general hypothesis of global warming associated with an increase in average temperature. The sea acoustic climate is derived from the concept of climate and refers to the conditions of propagation of acoustic waves in a particular basin. In this paper, the results of systematic measurements of temperature, salinity and velocity distributions of sound...
-
Comment on permeability conditions in finite element simulation of bone fracture healing
PublikacjaThe most popular model of the bone healing considers the fracture callus as poroelastic medium. As such it requires an assumption of the callus’ external permeability. In this work a systematic study of the influence of the permeability of the callus boundary on the simulated bone healing progress is performed. The results show, that these conditions starts to play significant role with the decrease of the callus size. Typically...
-
Properties and interpretation of Instantaneous Complex Frequency
PublikacjaThe concept of Instantaneous Complex Frequency (ICF) was first defined by Lindon and developed mainly in works of two authors S. Hahn and M. Rojewski. Although it is not widely used in signal analysis, ICF was already used as a complex signal representation in the verification of handwritten signatures, pitch estimation, symbol timing recovery in PSK receiver and in detection of anomalies in data transmission. It should be noted,...
-
Community Road Safety Strategies in the Context of Sustainable Mobility
PublikacjaThe paper presents an overview on the road safety strategies and action plans implemented in the framework of the “SOL - Save our lives: Comprehensive road safety strategy for Central Europe” project. It contains summarization of learned knowledge regarding the efficiency of measures applied and highlights examples of good practices. The purpose of the paper is to provide recommendations for effective and successful planning, formulation...
-
Toward Smart Innovation Engineering: Decisional DNA-Based Conceptual Approach
PublikacjaABSTRACT Knowledge and experience are essential requirements for product innovation. The presented paper proposes a systematic approach for product innovation support using a Smart Knowledge Management System comprising a Set of Experience Knowledge Structure (SOEKS) and Decisional DNA (DDNA). This proposed system is dynamic in nature because it updates itself every time a new decision related to innovation is made. Through this...
-
The Concept of Geodetic Analyses of the Measurement Results Obtained by Hydrostatic Leveling
PublikacjaThe article discusses the issue of hydrostatic leveling. Its application is presented in structural health monitoring systems in order to determine vertical displacements of controlled points. Moreover, the article includes a complete computation scheme that utilizes the estimation from observation differences, allowing the elimination of the influence of individual sensors’ systematic errors. The authors suggest two concepts of...
-
From Janus nanoparticles to multi-headed structure - photocatalytic H2 evolution
PublikacjaThe generation of stable, high-performance photocatalysts with appropriate charge distribution for solar energy conversion is currently one of the urgent missions of photocatalytic science. Recent studies have shown that the Janus NPs with characteristic varied, asymmetric structure may boost overall efficiency of photocatalys. However, there is still a lack of systematic studies in which Janus-type particles are used in the hydrogen...
-
Data-driven models for fault detection using kernel pca:a water distribution system case study
PublikacjaKernel Principal Component Analysis (KPCA), an example of machine learning, can be considered a non-linear extension of the PCA method. While various applications of KPCA are known, this paper explores the possibility to use it for building a data-driven model of a non-linear system-the water distribution system of the Chojnice town (Poland). This model is utilised for fault detection with the emphasis on water leakage detection....
-
Multi-objective optimization for assessment of topological modification in UWB antennas
PublikacjaThis paper addresses an issue of systematic and rigorous assessment of effects of topological modifications on the performance of compact UWB antennas. Application of fast surrogate-assisted multi-objective optimization procedures allows us for obtaining, in a practically acceptable timeframe, a set of designs representing the best possible trade-offs between conflicting objectives (here, antenna size minimization and reduction...
-
Approaching Secure Industrial Control Systems
PublikacjaThis study presents a systematic approach to secure industrial control systems based on establishing a business case followed by the development of a security programme. To support these two fundamental activities the authors propose a new method for security cost estimation and a security assessment scheme. In this study they explain the cost evaluation technique and illustrate with a case study concerning the assessment of the...
-
Modular Experience-Based Smart Innovation Engineering System
PublikacjaThe current paper presents the systematic approach for supporting the product innovation process of manufactured products. The proposed system uses a collective, team-like knowledge developed by innovation related experiences of the formal decisional events. The proposed system for smart innovation engineering carries the promise to support the innovation processes in a quick and efficient way. It stores the past decisional events...
-
Standards on Cyber Security Assessment of Smart Grid
PublikacjaSecurity evaluation of communication systems in smart grid poses a great challenge to the developers and operators. In recent years many new smart grid standards were proposed, which paradoxically results in the difficulty in finding a relevant publication in this plethora of literature. This paper presents the results of a systematic analysis which aimed at addressing this issue by identifying standards that present sound security...
-
REWIZJA PRZYBLIŻONYCH METOD OBLICZANIA OPORU CAŁKOWITEGO KADŁUBA W OPARCIU O BADANIA MODELOWE WYBRANEGO JACHTU ŻAGLOWEGO
PublikacjaRewizja opiera się na weryfikacji wybranych przybliżonych metod prognozowania oporu całkowitego gołego kadłuba opracowanych w wyniki badań systematycznej serii kadłubów jachtów żaglowych w latach od 1973 do 2010 znanych, jako The Delft Systematic Yacht Hull Series (DSYHS). Zademonstrowano wyniki otrzymane w oparciu o wzory przybliżone (Metoda Delft), obliczenia numeryczne (CFD) i badania modelowe dla wybranego jachtu żaglowego...
-
Electron energy-loss spectroscopy of excited states of the diazine molecules: Pyridazine
PublikacjaExcitation of the valence electronic states of the pyridazine molecules in the gas phase have been studied using the technique of electron energy-loss spectroscopy. Varying the electron scattering conditions, the residual electron energy and scattering angle, enabled the optically-allowed and -forbidden excitations to be differentiated. The measured energy-loss spectra enabled the vertical excitation energies of the observed states...
-
Software tool for modelling of mechatronic systems with elastic continua
PublikacjaThe paper presents a systematic computational package for modelling and analysis of complex systems composed of multiple lumped and distributed parameter subsystems. The constructed computer program enables the frequency domain analysis of a class of linear systems and to obtain reduced order model in the form of bond graph. Obtained modal bond graph can be directly exported into 20-Sim package to further processing including nonlinear...
-
Interaction of low energy electrons with formic acid monomer, dimer and trimer
PublikacjaConfigurations of the formic acid monomer, dimer and trimer are presented. We have calculated the total energies for these structures. We have considered also the negatively charged clusters and discussed the possible pathways of interaction of low energy electrons with monomers and clusters. Calculations have been executed using 6-311G** and 6-311++G** basis sets. The electron affinities of monomer and clusters are presented....
-
Smart Innovation Engineering System - A Tool for Facilitating Product Innovation Process
PublikacjaFor the survival and prosperity of the manufacturing unit, entrepreneurs need to find out new ideas that can be implemented in the products leading to innovation. The current study employs a systematic approach for product innovation. In this approach past experiences based on innovation decisions are stored and recalled during the innovation problem solving process. Implementing this system in the process of product innovation...
-
Ernst Cassirer's Idea of the Critique of Knowledge
PublikacjaArticle is a systematic and historical presentation of a specific understanding of the idea of transcendentalism, developed in so called Marburg School of neo-Kantianism. Their unique line of interpretation of Kant’s critical philosophy which consisted in contrasting critical (relational) and dogmatic (substantial) understanding of basic philosophical concepts is characteristic, from one hand, of Marburg School of idealism and,...
-
Towards defragmented Lighting Design: concatenating research theories for effective use in design practices.
PublikacjaThis paper aims to provide guidelines for transferring design research to practice in the realm of lighting. It is based on the premise that design research in lighting should function as a development of practice, instead of being a distraction to it. Design research refers to the scholarly inquiry that seeks to advance design by studying and improving it in systematic and scientific ways by expanding, testing and operationalizing...
-
Cybersecurity and Privacy in Standards for Smart Grids – a Comprehensive Survey
PublikacjaResilient information and communications technologies are a prerequisite for reliable operation of smart grid. In recent years, many standards for the new form of electricity network have been proposed, which results in operators and other smart grid stakeholders having difficulties in finding the documents which can be related to their particular problems. The purpose of this paper is to bring in all smart grid standards that...
-
Community of Practice for Product Innovation Towards the Establishment of Industry 4.0
PublikacjaThe aim of this paper is to present the necessity of formulating the Community of Practice for Product Innovation process based on Cyber-Physical Production Systems towards the establishment of Industry 4.0. At this developing phase of Industry 4.0, there is a need to define a clear and more realistic approach for implementation process of Cyber-Physical Production Systems in manufacturing industries. Today Knowledge Management...
-
Investigations of the optical activity of nonlinear crystals by means of dual-wavelength polarimeter
PublikacjaA dual-wavelength method in high accuracy polarimetry has been successfully tested and applied to measure optical activity (OA) of nonlinear crystals. In proposed polarimetric scheme two neighboring semiconductor laser wavelengths (635 and 650 nm) are used, which increases number of parameters measured simultaneously and improves the data processing. By neglecting dispersion of eigen wave ellipticity in crystals, more efficient...
-
Bridging the gap between business process models and use-case models
PublikacjaToday's software development methodologies are equipped with a plethora of methods and techniques for business process engineering and Requirements Engineering. However, heavy investments in IT have not brought forth expected results. What seems to be lacking is a systematic approach that consolidates both disciplines to gain a synergistic effect. To address this challenge we extend Use-Case Driven Approach (UCDA) by binding use...
-
Application in circular sawing machines of the experimental results of investigations of the chip removing system operation
PublikacjaThe experimental results of the chip removing system operation are presented. The main aim of them was to optimize suction system of the panel saw Fx3 and its follower Fx550. The attention was focused on the upper casing, which was the part of removing system. Within the framework of the work a systematic experimental study of pressure distribution in the casing during operation of the selected rotational speed of saw blade with...
-
Connectivity Improvement in Wireless Sensor Networks Using ESPAR Antennas with Dielectric Overlays
PublikacjaThis article presents an electrically steerable parasitic array radiator (ESPAR) switched beam antenna with a dielectric overlay to miniaturize the antenna and modify the radiation pattern in the vertical plane. The antenna is intended for a gateway in a wireless sensor network (WSN) and is located on the ceiling of a room. Because the ESPAR antenna consists of an array of vertical monopoles, there is a deep minimum in the radiation...
-
Influence of Heat Treatment Temperature on Fatigue Toughness in Medium-Carbon High-Strength Steels
PublikacjaCurrent research has demonstrated that the tempering temperature affects the martensitic transformation of medium-carbon high-strength steels. This temperature plays an important role in the final microstructure, percentage ratios of martensite to ferrite phases and, consequently, in the mechanical properties and the fatigue response. So far, the relationship between the martensitic tempering temperature and the cyclic deformation...
-
Landscape protection - the challenge for sustainable planning
PublikacjaGrowing spatial chaos reminds us of the need for systematic, complex approaches related to environmental and landscape issues within different planning, organizational, operational, legal and political activities. It has been proved, that LVIA within EIA plays an important role in the enhancement of the spatial planning system, and that there is a need to use the potential of EIA/LVIA in spatial development and management. But...
-
Effect of tube bundle arrangement on performance of shell-and-tube latent heat storage system
PublikacjaThis work presents the results of experimental investigation on charging and discharging of latent heat storage systems (LHSS) in the form of shell-and-tube heat exchangers with a variable arrays of the tube bundles. The tests included two tube arrangements – in-line and triangular (staggered), a variable number of tubes in a bundle, two pitch ratios, and different tube positions in a bundle. Three commercial products (LTP56, RT54HC,...
-
Using argument structures to create a measurement plan
PublikacjaWhile planning an experiment the same question always arises: What are the goals of the experiment and which measurements are needed to demonstrate that the goals have been achieved? Deciding about the extent of raw data to be collected, the metrics to be constructed on those data and the interpretation of the metrics with respect to the assumed goals is by no means a trivial task. In this paper we show how a well known Gal-Question-Metrics...
-
Expert assessment of arguments: a method and its experimental evaluation
PublikacjaArgument structures are commonly used to develop and present cases for safety, security and other properties. Such argument structures tend to grow excessively. To deal with this problem, appropriate methods of their assessment are required. Two objectives are of particular interest: (1) systematic and explicit assessment of the compelling power of an argument, and (2) communication of the result of such an assessment to relevant...
-
Ab initio study of formic acid monomer, dimer and trimer
PublikacjaConfigurations of the formic acid monomer, dimer and trimer are presented. The total energies for these structures have been calculated while the negatively charged clusters were considered and the possible pathways of interaction of low energy electrons with monomers and clusters were discussed. Calculations have been executed using 6-311 G** and 6-311 ++G** basis sets. The electron affinities of monomer and clusters are presented....
-
High Performance Tubular Heat Exchanger with Minijet Heat Transfer Enhancement
PublikacjaIn the paper, the original cylindrical heat exchanger with minijets (MJHE) was introduced. The systematic experimental analysis of the prototype heat exchanger was described with special attention paid to such parameters as the heat transfer effectiveness, heat transfer rates, overall heat transfer coefficients, and pressure drop. The heat transfer coefficients were determined based on Wilson plot method, the most suitable approach...
-
Mid-infrared spectroscopy for characterization of Baltic amber (succinite)
PublikacjaNatural Baltic amber (succinite) is the most appreciated fossil resin of the rich cultural traditions dating back to prehistoric times. Its unequivocal identification is extremely important in many branches of science and trades including archeology, paleontology, chemistry and finally mineralogical and gemological societies. Current methods of modification of natural succinite are more and more sophisticated making the identification...
-
New thiourea organocatalysts and their application for the synthesis of 5-(1H-indol-3-yl)methyl-2,2-dimethyl-1,3-dioxane-4,6-diones a source of chiral 3-indoylmethyl ketenes
PublikacjaThe stereoselective properties of modified thiourea organocatalysts were tested in the Friedel–Crafts alkylation of indole with 5-arylidene-2,2-dimethyl-1,3-dioxane-4,6-diones, which produces chiral 5-((1H-indol-3-yl)(aryl)methyl)-2,2-dimethyl-1,3-dioxane-4,6-diones. Based on a tentative reaction mechanism for ((S)-N-benzyl-2-(3-(3,5-bis (trifluoromethyl)phenyl)thioureido)-N,3,3-trimethylbutanamide organocatalysts, modifications...
-
Knowledge-based functional safety management using ProSIL software
PublikacjaIn the article the ProSIL software for computer aided functional safety management is presented. The software consists of three modules for the determination of the required SIL level (ProSILen) and verification of the SIL level (ProSILver). In the ProSIL the calibrated knowledge-based risk graph method for determining the required safety integrity level (SIL) of the safety functions identified in hazard analysis is implemented....
-
Interoperability Description of Web Services Based Application Servers
PublikacjaWeb services standards were designed to enable interoperability of heterogeneous application servers in the Service Oriented Architecture. Although the standards proved to be highly successful, there are still difficulties in effective services integration. The paper presents a methodology that enables description of application servers interoperability in order to improve the service integration process. The methodology proposes...
-
A Novel Synthesis Technique for Microwave Bandpass Filters with Frequency-Dependent Couplings
PublikacjaThis paper presents a novel synthesis technique for microwave bandpass filters with frequency-dependent couplings. The proposed method is based on the systematic extraction of a dispersive coupling coefficient using an optimization technique based on the zeros and poles of scattering parameters representing two coupled resonators.The application of this method of synthesis is illustrated using two examples involving four and five-pole...
-
Performance analysis of data transmission in MC-CDMA radio interface with turbo codes
PublikacjaMulti-carrier code division multiple access (MC-CDMA) technique is a combination of two radio access techniques: CDMA and orthogonal frequency division multiplexing and has the advantages of both techniques. The paper presents the design of transmitter and receiver for MC-CDMA radio interface. It also presents encoders and decoders of turbo codes which were used in simulation of the MC-CDMA technique. Two turbo codes with 8-state...
-
Pedestrian safety in road traffic – studies, recommendations and proposed improvements
PublikacjaPedestrians are involved and most frequently the victims of every third road accident in Poland. Pedestrian accidents most frequently occur in complex circumstances, as a result of many factors related to the behaviour of drivers and pedestrians. The basic parameters that determine road safety include the perception of traffic and visibility on the road. The paper will present the results of research conducted within the project...
-
Measurement method for capacitive sensors for microcontrollers based on a phase shifter
PublikacjaA complete measurement method dedicated to capacitive sensors has been developed. It includes the development of hardware (an analogue interface circuit for microcontrollers with built-in times/counters and analogue comparators) and software (a measurement procedure and a systematic error calibration (correction) algorithm which is based on a calibration dictionary). The interface circuit consists of a low-pass filter and a phase...
-
Establishing intelligent enterprise through community of practice for product innovation
PublikacjaThis paper presents the idea of implementing the virtual Community of Practice for Product Innovation processes towards the establishment of intelligent enterprise. Since the fourth industrial revolution is passing through the developing phase, implementation of Cyber-Physical Production Systems require more realistic approach. Knowledge Management and Engineering plays an important role in manufacturing industries facing global...
-
Experimental analysis of chip removing system in circular sawing machine
PublikacjaPaper presents analysis of the process of removing the wood chips generated during the cutting of the material on the circular sawing machine. The attention is focused on the upper cover of the chip removing system. Within the framework of the work a systematic experimental study of pressure distribution in the cover during operation of the selected rotational speed of saw blade with a diameter of 300 mm and 450 mm was carried...
-
Extraction of information from born-digital PDF documents for reproducible research
PublikacjaBorn-digital PDF electronic documents might reasonably be expected to preserve useful data units of their source originals that suffice to produce executable papers for reproducible research. Unfortunately, developers of authoring tools may adopt arbitrary PDF generation strategies, producing a plethora of internal data representations. Such common information units as text paragraphs, tables, function graphs and flow diagrams,...
-
Framework for Product Innovation Using SOEKS and Decisional DNA
PublikacjaProduct innovation always requires a foundation based on both knowledge and experience. The production and innovation process of products is very similar to the evolution process of humans. The genetic information of humans is stored in genes, chromosomes and DNA. Similarly, the information about the products can be stored in a system having virtual genes, chromosomes and decisional DNA. The present paper proposes a framework for...
-
Resistant to correlated noise and outliers discrete identification of continuous non-linear non-stationary dynamic objects
PublikacjaIn this article, specific methods of parameter estimation were used to identify the coefficients of continuous models represented by linear and nonlinear differential equations. The necessary discrete-time approximation of the base model is achieved by appropriately tuned FIR linear integral filters. The resulting discrete descriptions, which retain the original continuous parameterization, can then be identified using the classical...
-
Resistant to correlated noise and outliers discrete identification of continuous non-linear non-stationary dynamic objects
PublikacjaIn this study, dedicated methods of parameter estimation were used to identify the coefficients of continuous models represented by linear and nonlinear differential equations. The necessary discrete-time approximation of the base model is achieved by appropriately tuned FIR linear integral filters. The resulting discrete descriptions, which retain the original continuous parameterization, can then be identified using the classical...
-
Selecting an Applicable Cybersecurity Assessment Framework: Qualitative Metrics-Based Multiple-Factor Analysis
PublikacjaRecently, a survey of cybersecurity assessment methods focused on general characteristics was conducted. Among its major findings, it revealed the methods’ adoption issues. This paper presents a follow-up to the study. It provides an in-depth analysis of the methods’ adoption-related properties based on qualitative metrics. As a result, the proposals which demonstrate a higher adoption potential were identified. The methods are...
-
Role of public space in designing complex urban structures
PublikacjaThe aim of this article is to present the main assumptions about design studios as held in the Faculty of Architecture at Gdańsk University of Technology (FA-GUT), Gdańsk, Poland, adapted to the development of key competencies in the urban planning of complex urban structures. One of these competencies is the design of public spaces. The main goal of the studios was to deliver knowledge of the role of public spaces in the design...