Filtry
wszystkich: 257
Wyniki wyszukiwania dla: ORIFICE
-
Cylindrical orifice testing in laminar flow with the orifice diameter ratio β = 0.5
PublikacjaThe paper presents the results of an experimental study of a cylindrical orifice with the orifice diameter ratio β = 0.5 and the flow opening length‑to‑diameter ratio L/d = 1, with hydraulic oil flowing in the DN50 measuring channel. The measurements of the values characterising the oil flow were made in the laminar flow regime, for the Reynolds numbers ranging between Re = 100 to 950. Based on the experimental tests, standard...
-
The assessment of metrological properties of segmental orifice based on simulations and experiments
PublikacjaSegmental orifices are often used to measure flows of heterogeneous mixtures, especially in flow meters in the power industry, for example. The orifice (with module m= 0.25) was installed in a stainless-steel pipe with internal diameter of 50 mm, placed in a hydraulic water system. The research was performed for Reynolds numbers ranging from 9,000 to 17,000. The flow characteristics of this orifice obtained based on simulation...
-
Estimating the uncertainty of the liquid mass flow using the orifice plate
PublikacjaThe article presents estimation of measurement uncertainty of a liquid mass flow using the orifice plate. This subject is essential because of the widespread use of this type of flow meters, which renders not only the quantitative estimation but also qualitative results of this type so those measurements are important. To achieve this goal, the authors of the paper propose to use the theory of uncertainty. The article shows the...
-
Uncertainty of the liquid mass flow measurement using the orifice plate
PublikacjaThe article presents an estimation of measurement uncertainty of a liquid mass flow using the orifice plate. This subject is essential because of the widespread use of this type of flow meters. Not only the quantitative estimation but also the qualitative results of those measurements are important. To achieve these results the authors of the paper propose to use the theory of uncertainty. The article shows the analysis of the...
-
A numerical and experimental analysis of multi-hole orifice in turbulent flow
PublikacjaIn this research study, the comprehensive metrological analysis is investigated for a 4-hole orifice with module m = 0.25 installed in the pipeline with an internal diameter of 50 mm. A detailed numerical simulation was performed for the turbulence models: k-ε-realizable and k-ω-BSL. The novelties of the research include model validation by comparing the results of numerical studies with the experiment conducted in the area of...
-
Determination of the uncertainty of mass flow measurement using the orifice for different values of the Reynolds number
PublikacjaStandard orifice flowmeters are widely used in the chemical and energy industry. Therefore, it is essential to know how accurate the measurements made with these instruments are. The paper presents an estimation of measurement uncertainty of a liquid mass flow using the orifice plate. The authors will present the influence of ranges of the Reynolds number on the estimated uncertainty, obtained on the basis of simulation and laboratory...
-
A FEM membrane model of human fascia-synthetic implant system in a case of a stiff ventral hernia orifice
PublikacjaPraca prezdstawia model matematyczny układu tkanka ludzka - implant syntetyczny w postaci tzw. siatki w leczeniu przepuklin brzusznych. Implant jest tu moelowany jako struktura membranowa. Ocena wpływu danych materiałowych oraz wstępnego napięcia na zachowanie pracującej membrany po implantacji została przedstawiona na podstawie analizy wrażliwości. Pracę podsumowują pewne wskazówki dla chirurgów implantujących siatki.
-
Uncertainty of mass flow measurement using centric and eccentric orifice for Reynolds number in the range 10,000 ≤ Re ≤ 20,000
PublikacjaThe article analyses the impact of the Reynolds number on the estimated uncertainty of the mass flow rate measurement using an orifice plate. The objects of the research were two types of orifices: centric (ISA) and eccentric, with the diameter ratio β = 0.5. Studies were performed by Monte Carlo simulation and experiments for Reynolds numbers in the range 10,000 ≤ Re ≤ 20,000. The obtained results have shown that for both orifice...
-
Cienie i cieniowanie w grafice komputerowej
PublikacjaW artykule poruszono kwestie dotyczące tworzenia cieni i światłocieni w gra-fice komputerowej. Przywołano popularne algorytmy do generowania cieni orazich relacje z metodami wykreślnymi. Ponadto omówiono specyfikę i niektóremożliwości przykładowego programu (3DStudio Viz 3) w tym zakresie.
-
Zastosowania trójkątnych płytek w grafice komputerowej
PublikacjaPraca opisuje metody pokrywania trójkątnymi płytkami dowolnych powierzchni trójwymiarowych reprezentowanych przez siatki trójkątne. Omówione są znane metody konstruowania i układania trójkątnych płytek oraz ich optymalizacja algorytmami kolorowania grafów. Zaproponowana jest ulepszona hybrydowa metoda, umożliwiająca pokrycie dowolnej powierzchni wzorem, który wymaga kierunkowego uporządkowania.
-
An Empirical Propagation Model for Corridors in Office Buildings
PublikacjaThis paper presents an empirical propagation path loss model for corridors in office buildings. The proposed model estimates changeable character of radio signal attenuation, based on a special approach as a combination of the simple free-space model with the author’s model. The measurement stand and measurement scenario are described. The propagation path loss research have been made in corridor for different frequencies in range...
-
A Happy Dean’s Office: But Is There One? The Case of Polish HEIs*
Publikacja -
Wykorzystanie nowych metod wnioskowania w grafice i animacji komputerowej
PublikacjaReferat opisuje realizowane zadania badawcze, dotyczące wykorzystana nowych metod wnioskowania (tzw. soft-computingu) w przetwarzaniu grafiki i animacji komputerowej. W pierwszym z zadań, opracowaniu metody poprawy jakości fotografii tekstu przeznaczonych do rozpoznawania znaków, wykorzystano algorytmy przetwarzania obrazów i ich modyfikacje do usuwania ze zdjęcia tła oraz gradientu jasności, następnie nowa metoda filtracji nieliniowej...
-
As- built inventory of the office building with the use of terrestrial laser scanning
PublikacjaTerrestrial Laser Scanning (TLS) is an efficient tool for building inventories. Based on the red- laser beam technology it is possible to provide the high accuracy data with complete spatial information about a scanned object. In this article, authors present the solution of use a TLS in as-built inventory of the office building. Based on the provided data, it is possible to evaluate the correctness of built details of a building...
-
Association of Office and Ambulatory Blood Pressure With Mortality and Cardiovascular Outcomes
Publikacja -
Chapter 18 Innovation in a Dean’s Office: The Case of Polish HEIs
Publikacja -
Lighting conditions in Home Office and occupant’s perception: an international study
PublikacjaThe global pandemic and physical distancing restrictions are forcing us to rethink how residential buildings are used regarding the visual environment. This paper describes home office lighting conditions within different countries and continents. The aim is to define the current limitations of home offices in providing a resilient visual environment. The work was developed by a team of international experts working together on...
-
Measurement of mass flow of viscous liquid through a Cylindrical Orifice under laminar flow (CylOr)
Dane BadawczeThe data was obtained as part of the project "Measurement of mass flow of viscous liquid through a Cylindrical Orifice under laminar flow (CylOr)", in which flow tests of hydraulic oil through a cylindrical orifice with a thickness of l = 25 mm and a throat b = 0.5 (diameter pipes D = 50 mm, orifice diameter d = 25 mm) on the test stand at the Department...
-
Channel Impulse Response Measurements at mmWave Band in Office and Conference Rooms
PublikacjaIn this paper, the measurements of the channel impulse response at mmWave band in office and conference rooms are described. The central frequency is 27 GHz with a bandwidth of 400 MHz. The description of the used measurement stand and considered environments are presented. The initial analysis of the power delay profile, mean delay, and RMS delay spread allows preliminary conclusions to be drawn that there is a significant impact...
-
Working in harmony with nature. Green office buildings in a present-day city
PublikacjaMetropolis - as main point of people's migration, mostly because of work, have to face sustainable development as a strategy for the near future. This article describes possible ways leading to the best office building concepts in the design process. Searching for a workspace in harmony with nature is one of the aspects of a balanced development. The challenge is to create functional, compact, environmentally friendly and healthy...
-
Lighting conditions in home office and occupant’s perception: Exploring drivers of satisfaction
PublikacjaThis paper depicts lighting home office conditions within different countries and continents, emphasizing the user’s satisfaction with the visual environment. The scope of this article is to investigate the drivers of participants’ satisfaction with the lighting conditions at the home office. The study was developed by a team of international experts working together on Subtask A: User perspective and requirements, Task 61 IEA...
-
The methodology of technical due diligence report preparation for an office, residential and industrial buildings
Publikacja -
Renal denervation reduces office and ambulatory heart rate in patients with uncontrolled hypertension
Publikacja -
Soil-structure interaction effects on modal parameters of office buildings with different number of stories
PublikacjaThe paper summarizes the results of a numerical investigation designed to study the soil-structure interaction effects on modal parameters of three office buildings. The reinforced-concrete 4-storey, 8-storey, and 12-storey office buildings, each with additional two levels of embedded basements, represent low, medium, and high-rise structures, respectively. In order to conduct this research, detailed finite-element structure models...
-
Budynek biurowy K5 w Gdańsku = Ka5 Office Building in Gdańsk : założenia autorskie
Publikacja"Założenia autorskie" jako uzupełnienie do prezentacji zrealizowanego w Gdańsku w roku 2008 budynku biurowego K5.
-
Pejzaż archeologiczny w grafice XVI wieku. Uwagi o narodzinach i karierze "veduta romana".
Publikacja -
Study on 19th-century cast iron columns from the former financial office building in Kwidzyn
PublikacjaThe article presents the results for cast iron columns used as floor supports in the former financial office building in Kwidzyn (Poland).The stocktaking drawings provided the general and detailed data about the 19th century designer’s decisions. During the research, architectural and structural analysis was carried out. The graphics were used as a starting material for preparing 3D calculation models. The FEM-based numerical simulations...
-
Daytime, home and office blood pressures in treated hypertensive patients according to accretion of cardiovascular risk
Publikacja -
Flood risk assessment for office and services building Alchemia II at Al. Grunwaldzka 409 in Gdansk.
PublikacjaThe aim of the study is to assess the risk of flood from natural meteorological and hy-drological phenomena, for office and services building Alchemia II in Gdansk at Al. Grun-waldzka 409. The project includes the analysis of potential sources of floods in Gdansk re-garding the Baltic Sea and the Gulf of Gdansk, the Vistula River basin and excessive rainfall and snowmelt waters being a significant element of hydrological processes...
-
Urgent need to address quality control issues of out‐of‐office blood pressure measurement and patient risk assessment
Publikacja -
REVUE SCIENTIFIQUE ET TECHNIQUE-OFFICE INTERNATIONAL DES EPIZOOTIES
Czasopisma -
Magnetic instrumentation and other applications of magnets in NOTES
PublikacjaModern surgery is developing towards a minimally invasive approach. To minimize the trauma the number of ports is either limited as in single incision laparoscopic procedures or ports are introduced through natural orifices as in nat- ural orifice translumenal endoscopic surgery (NOTES). To provide surgeons with appropriate instrumentation novel technologies are employed involving magnets. This article summarizes the theoretical...
-
Patient in the otolaryngology office in the time of the COVID-19 pandemic in the light of current recommendations, legal regulations and authors’ own experience
Publikacja -
Opposing Age-Related Trends in Absolute and Relative Risk of Adverse Health Outcomes Associated With Out-of-Office Blood Pressure
Publikacja -
Masked hypertension in type 2 diabetes: never take normotension for granted and always assess out-of-office blood pressure
Publikacja -
RESPONSE TO ORTHOSTATIC STRESS PREDICTS OFFICE‐DAYTIME BLOOD PRESSURE DIFFERENCE, BUT NOT NOCTURNAL BLOOD PRESSURE FALL IN MILD ESSENTIAL HYPERTENSIVES: RESULTS OF THE HARVEST TRIAL
Publikacja -
Conference on Office Information Systems
Konferencje -
Is mesh fixation necessary in laparoendoscopic techniques for M3 inguinal defects? An experimental study.
Publikacjarepairs, in case of large direct hernias (M3) mesh fixation is recommended to reduce recurrence risk. Despite lack of highquality evidence, the recommendation was upgraded to strong by expert panel. The authors conducted a research experiment to verify the hypothesis that it is possible to preserve the mesh in the operating field in large direct hernias (M3) without the need to use fixing materials. Method The authors conducted...
-
Analysis of the structure of the atomized fuel spray with marine diesel engine injector in the early stage of injection
PublikacjaThis paper presents the results of the experimental research of the atomized fuel spray with the marine diesel engine injector in the constant volume chamber. The specificity of the phenomena occurring in the marine engine cylinder was the reason to use the optical visualisation method in the studies – the Mie scattering technique. This work presents an analysis of the influence of different geometry of outlet orifice and opening...
-
Cavitation based cleaner technologies for biodiesel production and processing of hydrocarbon streams: A perspective on key fundamentals, missing process data and economic feasibility – A review
PublikacjaThe present review emphasizes the role of hydrodynamic cavitation (HC) and acoustic cavitation in clean and green technologies for selected fuels (of hydrocarbon origins such as gasoline, naphtha, diesel, heavy oil, and crude oil) processing applications including biodiesel production. Herein, the role of cavitation reactors, their geometrical parameters, physicochemical properties of liquid media, liquid oxidants, catalyst loading,...
-
Assessment of usefulness of different tacks in laparoscopic ventral hernia repair
PublikacjaLaparoscopic ventral hernia repair is becoming a popular technique with good results and fast postoperative recovery. The mesh is placed directly under the peritoneum and anchored with transabdominal sutures and tacks. However, the ideal size of the mesh covering the hernia orifice is know, nor the ideal type or amount of tacks has to be described.
-
Other specified noninflammatory disorders of cervix uteri - Female, 63 - Tissue image [6020730010708801]
Dane BadawczeThis is the histopathological image of CERVIX UTERI tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Other specified noninflammatory disorders of cervix uteri - Female, 63 - Tissue image [6020730010709451]
Dane BadawczeThis is the histopathological image of CERVIX UTERI tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Other specified noninflammatory disorders of cervix uteri - Female, 63 - Tissue image [6020730010702441]
Dane BadawczeThis is the histopathological image of CERVIX UTERI tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Other specified noninflammatory disorders of cervix uteri - Female, 63 - Tissue image [6020730010708491]
Dane BadawczeThis is the histopathological image of CERVIX UTERI tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Investigation of abdomen surface deformation due to life excitation: implications for implant selection and orientation in laparoscopic ventral hernia repair
PublikacjaVentral hernia is a common medical problem. Statistically there are around 10% recurrences of the sickness. The authors' former investigation proved edges of the hernia orifice displacements to be one of the factors causing recurrence. Thus, experimental investigation of the abdomen surface deformation due to some normal activities of people is studied.The extreme strains, their localization and directions are identified. The acquired...
-
Uterus, unspecified - Female, 44 - Tissue image [413073001884811]
Dane BadawczeThis is the histopathological image of CERVIX UTERI tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Key success factors for small design offices in the bidding process
PublikacjaCompetition in the design office market is high, therefore it is important to be aware of the conditions determining the competitive advantage, thus increasing the bidding effectiveness. For this reason, the aim of the article is to identify key success factors (KSF) increasing successful bidding of a small design office. The factors were identified and then analysed based on a literature review, expert interviews and using Group...
-
Magdalena Apollo dr inż.
Osoby2017 - PhD in Civil Engineering, thesis: Risk management in construction investments related to urban regeneration projects, Gdansk University of Technology IX 2012–VI 2013 - Postgraduate Studies at Gdynia Maritime University: Research Project Management (IPMA D Certificate) 2010 – MSc in Management and Marketing, Gdansk University of Technology 2007 – MSc in Civil Engineering, Gdansk University of Technology 2007-2010 - structural...
-
Jacek Stefański prof. dr hab. inż.
OsobyJacek Stefański ukończył studia na Wydziale Elektroniki Politechniki Gdańskiej (PG) w 1993 r. W 2000 r. uzyskał stopień doktora nauk technicznych w dyscyplinie telekomunikacja, w 2012 r. stopień doktora habilitowanego, natomiast w 2020 r. tytuł profesora nauk inżynieryjno-technicznych. Obecnie pracuje na stanowisku profesora w Katedrze Systemów i Sieci Radiokomunikacyjnych (KSiSR) PG. W latach 2005-2009 był zatrudniony w Instytucie...