Filters
total: 810
Search results for: ELECTROCHEMICAL PERFORMANCE
-
High performance LaNi1-xCoxO3-δ (x = 0.4 to 0.7) infiltrated oxygen electrodes for reversible solid oxide cells
PublicationOxygen electrodes prepared by infiltration of yttria stabilized zirconia backbone with Ce0.8Gd0.2O1.95 barrier layer and LaNi1-xCoxO3-δ (x=0.4 to 0.7) catalyst for application in reversible solid oxide cells have been studied. The effect of temperature and Ni:Co ratio on their phase composition, microstructure and electrochemical properties are discussed. It was shown that oxygen electrodes infiltrated with LaNi0.5Co0.5O3-δ had...
-
Improved performance of LaNi0.6Fe0.4O3 solid oxide fuel cell cathode by application of a thin interface cathode functional layer
PublicationIn this work, novel functional layers were prepared by a low temperature spray pyrolysis method on the oxygen side of the solid oxide cells. Thin layers of Ce0.8Gd0.2O2 and LaNi0.6Fe0.4O3 are prepared between the electrolyte and the porous oxygen electrode. Additionally the influence of the sprayed ceria barrier layer on the zirconia based electrolyte with the new layers is evaluated. Impedance spectroscopy results show improvement...
-
Fault Diagnostics in PEMFC Stacks by Evaluation of Local Performance and Cell Impedance Analysis
PublicationStarvation, flooding, and dry‐out phenomena occur in polymer electrolyte membrane fuel cells (PEMFCs), due to heterogeneous local conditions, material inhomogeneity, and uneven flow distribution across the single cell active area and in between the individual cells. The impact of the load level and air feed conditions on the performance was identified for individual single cells within a 10‐cell stack. Analysis of the current density...
-
Fe local structure in Pt-free nitrogen-modified carbon based electrocatalysts: XAFS study
PublicationThe paper presents a new results on the bonding environment (coordination number and geometry) and on oxidation states of Fe in nitrogen-modified Fe/C composites used as Pt-free catalysts for oxygen reduction in Direct Hydrogen Fuel Cells. Starting from glucose or fructose, two catalysts displaying different electrochemical performance were prepared and studied in the form of pristine powder and thin catalytic layer of electrode...
-
Methods of trend removal in electrochemical noise data – overview
PublicationIn this paper we shall review popular methods of trend removal from electrochemical noise time records. The basic principles of operation of the six most popular methods are explained. The proposed methods are: high - pass filtering, Moving Average Removal, polynomial detrending, wavelet detrending, Empirical Mode Decomposition and Variational Mode Decomposition. Estimation of trend removal quality...
-
The influence of thermal treatment on electrocatalytic properties of Mn-Co nanofilms on nickel foam toward oxygen evolution reaction activity
PublicationThis work evaluates electrodeposited and differently treated Mn-Co catalysts for their oxygen evolution reaction activity. Catalysts are evaluated in the as-deposited and heat treated state: after 350 C and 600 C. Results show that the highest electrochemical activity is obtained for the as-deposited Mn-Co oxyhydroxide, which possibly possess a layered double hydroxide structure. After the heat treatment process, especially after...
-
N-doped graphene quantum dot-decorated MOF-derived yolk-shell ZnO/NiO hybrids to boost lithium and sodium ion battery performance
PublicationSurface engineering at the nanoscale to obtain robust interface between metal oxides and quantum dots is essential for improving the performance and stability of battery materials. Herein, we designed and prepared novel N-doped graphene quantum dot-modified ZnO/NiO anode materials with a well-defined yolk-shell structure for lithium and sodium-ion batteries. NG QDs were assembled on the ZnO/NiO microspheres using three different...
-
Analysis of electrochemical noise by means bispectral techniques
PublicationProcesy o charakterze nieliniowym są często spotykane w praktyce pomiarów elektrochemicznych oraz korozyjnych. Przykładem mogą być procesy elektrodowe kontrolowane aktywacyjnie, dla których często stosowanym podejściem jest linearyzacja. W niniejszym, wprowadzającym doniesieniu przedstawione zostały możliwości analizy nieliniowości szumu elektrochemicznego z wykorzystaniem widm wyższych rzędów. W pracy przedstawiono wyniki analizy...
-
Analysis of electrochemical noise by means of bispectral technique
Publication -
Pitting corrosion in steel and electrochemical noise intensity
Publication -
Joint time–frequency analysis of electrochemical noise
Publication -
Harmonic Analysis Of Electrochemical and Corrosion Systems - A Review
Publication -
Instantaneous electrochemical impedance spectroscopy of electrode reactions
Publication -
Application of electrochemical noise technique in corrosion monitoring
PublicationTechnika szumu elektrochemicznego od ponad 20 lat stanowi przedmiot intensywnych badań mających na celu jej praktyczne zastosowanie w monitorowaniu korozji. U podstaw omawianej metody leży odpowiednia analiza rejestrowanych symultanicznie przebiegów prądowych i potencjałowych. W zależności od użytej techniki obróbki danych uzyskane mogą być informacje dotyczące ilościowych (szybkość) i jakościowych (rodzaj zaatakowania) cech procesu...
-
Instantaneous electrochemical impedance spectroscopy of electrode reactions.
PublicationUstalona została ciągła transformata STFT sinusoidalnego sygnału pobudzeniai odpowiedzi prądowej dla pierwszorzędowej reakcji elektrodowej. Impedancja elektrodowa wyznaczona została w łącznej dziedzinie czasowo-częstotliwościowej. Wykonano pomiary reakcji redukcji Cd(II) na kapiącej elektrodzie rtęciowej w funkcji czasu. Zaprezentowano możliwość wyznaczania chwilowych widm impedancyjnych. Opisano czasowe charakterystyki rezystancji...
-
Pitting corrosion in steel and electrochemical noise intensity
PublicationPrzedstawiono analizę szumu elektrochemicznego, rejestrowanego w obecności korozji wżerowej. Stwierdzono korelację pomiędzy intensywnością szumu a ubytkiem mas elektrod stalowych. Rejestry szumowe rozłożone zostały na składowe częstotliwościowe za pomocą przekształcenia falkowego. Dla pewnych składowych stwierdzono silniejszą korelację z ubytkiem mas korodujących elektrod. Pasmo częstotliwościowe powyższych składowych odpowiada...
-
Nonlinearity of electrochemical noise caused by pitting corrosion
PublicationPomiary wielkości statystycznych, innych niż rozkład widmowy czy amplitudowy mogą być źródłem dodatkowych informacji na temat mechanizmu powstawania szumu elektrochemicznego. Bispektrum stosowane jest do wykrycia istnienia składowych nieliniowych w badanym rejestrze szumowym. Analizowano elektrochemiczny szum prądowy rejestrowany w warunkach korozji wżerowej. Zaobserwowano zależność prąd-czas charakterystyczną dla stanu tworzenia...
-
Application of the electrochemical quartz crystal microbalance in corrosionstudies
PublicationPrzegląd niniejszy opisuje zastosowania elektrochemicznej wagi kwarcowej (EQCM) w badaniach korozyjnych. Przedstawione zostały dwa główne obszary badań. Jeśli chodzi o badania mechanizmów korozji, mikrowaga elektrochemiczna była wykorzystywana jako narzędzie do testowania korozji miedzi, niklu, cynku, aluminium i stopów. Była użyteczna w określaniu mechanizmów roztwarzania albo pasywacji w różnych warunkach. Drugim kierunkiem wykorzystania...
-
Synthesis and electrochemical characteristics of novel dithiocarbamate polymers
PublicationNovel dithiocarbamate compounds have been obtained by reacting a linear poly(ethylenimine)polymer, MW 50,000, with CS2. The resulting anionic polymers contain, depending on the reaction conditions, up to two sulfur atoms per one nitrogen atom (approx. 40% w/w). The polymers are soluble in dimethylsulfoxide and insoluble in acetonitrile solutions. In both solvents they are electrochemically active, in the latter case as a cast film...
-
An electronic nose based on the semiconducting and electrochemical gas sensors
PublicationThe practical application of human nose for fragrance recognition is severely limited by the fact that our sense of smell is subjective and gets tired easily. Consequently, there is a significant need for an instrument that can be a substitution of the human sense of smell. Development of an electronic nose devices is an active area of research starting from pioneering research of Dodd and Persuad in the mid-1980s. Such systems...
-
Exfoliated graphite with spinel oxide as an effective hybrid electrocatalyst for water splitting
PublicationThe aim of the conducted research was to develop hybrid nanostructures formed from MnCo2O4 and exfoliated graphite. Carbon added during the synthesis allowed for obtaining a well-distributed MnCo2O4 particle size with exposed active sites contributing to the increased electric conductivity. The influence of the weight ratios of carbon to a catalyst for hydrogen and oxygen evolution reactions was investigated. The new bifunctional...
-
Electrodes criticality: the impact of CRMs in the leachate electrochemical oxidation
Publication. Landfill leachate possesses high concentrations of ammonia, micropollutants, and heavy metals, and are characterised for low biodegradability. For this reason, conventional treatment technologies may result ineffective for complete pollutant removal. Electrochemical oxidation allows most of the of recalcitrant pollutants to be oxidised effectively within an easy operational and acceptable retention time, without the need to provide...
-
High catalytic performance of laccase wired to naphthylated multiwall carbon nanotubes
PublicationThe direct electrical connection of laccase on the electrode surface is a key feature in the design of efficient and stable biocathodes. However, laccases can perform a direct electron transfer only when they are in the preferable orientation toward the electrode. Here we report the investigation of the orientation of Laccase from Amano on multi-walled carbon nanotube surface modified with naphthalene group. Naphthylated multi...
-
Low cost electrochemical sensor module for measurement of gas concentration
PublicationThis paper describes a low cost electrochemical sensor module for gas concentration measurement. A module is universal and can be used for many types of electrochemical gas sensors. Device is based on AVR ATmega8 microcontroller. As signal processing circuit a specialized integrated circuit LMP9l000 is used. The proposed equipment will be used as a component of electronic nose system employed for classifying and distinguishing...
-
Electrochemical capacitor temperature fluctuations during charging/discharging processes
PublicationThepaperpresentsaproposalofusingadditionalstatisticalparameterssuchas:standarddeviation,variance, maximum and minimum increases of the observed value that were determined during measurements of temperature fields created on the surface of the tested electrochemical capacitor. The measurements were carriedoutusingthermographicmethodsinordertosupportassessmentoftheconditionofelectrochemical capacitorunderclassicdurabilitytestsbasedonmethodsofdeterminationofcapacityandequivalentseries...
-
Electrochemical investigations on corosivity of de-icing liquids for railway infrastructure
PublicationThe paper presents the results of electrochemical tests of the de-icing fluid for railway infrastructure. DC and AC electrochemical tests were performed to determine the corrosion rates of structural steel, cast iron and aluminium in the newly produced fluid. The results were compared with the corrosion rates of the same materials in the fluid without corrosion inhibitors. The obtained test results indicate a low corrosion risk...
-
Validation of dynamic electrochemical impedance spectrograms using autocorrelation function
PublicationValidation of impedance data is essential for checking the reliability of experimental data. Kramers – Kronig transformation is used to verify data obtained from classical Electrochemical Impedance Spectroscopy (EIS) measurements. Data obtained from Dynamic Electrochemical Impedance Spectroscopy (DEIS) could be validated in the same way, but in this case, there is no information about internal consistency between every single spectrum...
-
Effect of interconnect coating procedure on solid oxide fuel cell performance
PublicationChromium (Cr) species vaporizing from chromia-forming alloy interconnects is known as a source of degradation in solid oxide fuel cell (SOFC) stacks called “cathode poisoning”. (Mn,Co)3O4 spinel coatings offer good protection against Cr evaporation during operation. In this study, Crofer 22 APU steel interconnects were electrophoretically deposited in different mediums to obtain high packing of green coating layer. The optimized...
-
A dual-control strategy based on electrode material and electrolyte optimization to construct an asymmetric supercapacitor with high energy density
PublicationMetal-organic frames (MOFs) are regarded as excellent candidates for supercapacitors that have attracted much attention because of their diversity, adjustability and porosity. However, both poor structural stability in aqueous alkaline electrolytes and the low electrical conductivity of MOF materials constrain their practical implementation in supercapacitors. In this study, bimetallic CoNi-MOF were synthesized to enhance the electrical...
-
Application of electrochemical sensors and sensor matrixes for measurement of odorous chemical compounds
PublicationIn this paper describes the principle of operation of the electrochemical sensors and the sensor matrixes comprised of electrochemical sensors intended for measurement of odorous compounds. Critical comparison of these sensors’ advantages and disadvantages has been made. The fields of economy contributing to release of odours and the potential sources of their emission have been identified. Commercially available electrochemical...
-
Electrochemical Activity and Electrical Properties of Optimized Polypyrrole Coatings on Iron
PublicationIn this work, electrochemical activity and electrical properties of polypyrrole (PPy) coated iron electrodes have been investigated. PPy film was electrochemically polymerized from sodium salicylate aqueous solution under conditions, which provided an increase of iron corrosion resistance. It was noticed that the pH of the solution and the applied electrode potential range during the study of the polymer properties had an influence...
-
Local electrochemical impedance spectroscopy in dynamic mode of galvanic coupling
PublicationA novel method that combines local electrochemical impedance spectroscopy and mapping in dynamicmode is proposed. Method was validated over two galvanic couplings, namely zinc/copper and cad-mium/copper. Impedance spectrum response for all measuring points was obtained by means ofsimultaneous implementation of selected range of frequencies. Proposed method allows the measure-ment in a more time-efficient manner, at the same time...
-
Evidence for solid state electrochemical degradation within a small molecule OLED
PublicationAcridone derivative have been synthesised and used as OLED (Organic Light Emitting Diode) emitters which were found to be electroactive. Electrochemical investigations showed a side reaction takes place inside an active layer which diminished the overall device efficiency. By using a dopant and host active layer architecture, the formation of the by product was removed. The by-product was identified as a σ-dimer formed inside an...
-
Chapter 8. New composite materials for electrochemical capacitors
PublicationW pracy zaprezentowano materiały hybrydowe składające się z polimeru przewodzącego elektronowo połączonego z nieorganiczną siecią typu redoks. Te materiały to poli(3,4-etylenodioksytiofen) modyfikowany heksacyjanożelazianem (II/III) żelaza (pEDOT/Fehcf), kobaltu (pEDOT/Cohcf) i niklu (pEDOT/Nihcf).Materiały elektrodowe scharakteryzowano metodami elektrochemicznymi w elektrolitach niewodnych. Otrzymane materiały hybrydowe cechują...
-
Electrochemical and acoustic emission studies of aluminium pitting corrosion
PublicationBadania metodą potencjokinetyczną i emisjii akustycznej przeprowadzono w typowej trójelektrodowej celce elektrochemicznej. Elektrodę badaną przygotowano z stopu aluminium 1050A. Badania metodą cyklicznej polaryzacji i emisjii akustycznej wykonywano jednocześnie. Na podstawie wyników akustycznych i polaryzacyjnych wyznaczono potencjał korozji wzerowej.
-
APPLICATION OF NON-STATIONARY TECHNIQUES IN THE ANALYSIS OF ELECTROCHEMICAL NOISE
Publication -
Electrochemical and acoustic emission studies of aluminum pitting corrosion
Publication -
Electrodes criticality: the impact of CRMs in the leachate electrochemical oxidation
Publication -
Application of higher order spectra in the electrochemical noise analysis
Publication -
Graphene-based electrochemical biosensing system for medical diagnostics
Publication -
On electrochemical noise analysis for monitoring of uniform corrosion rate
PublicationSzybkość korozji jest określona przez rezystancję polaryzacyjną warstwy metal-elektrolit. Jej wartość może być wyznaczona za pomocą pomiarów szumów elektrochemicznych. Przedstawiono szczegółowo algorytm wyznaczania wartości rezystancji polaryzacyjnej na podstawie rejestrowanych sygnałów losowych dla przykładowych wyników badań eksperymentalnych. Oszacowano dokładność wyznaczanej wartości.
-
TASTE QUALITIES ESTIMATION BY TASTE SENSE AND ELECTROCHEMICAL SENSORS
PublicationThe principles of taste sense and kinds of tastes (sweet, salty, sour, bitter, umami and fat) have been described. Food quality estimation by taste sense: organoleptic testing and sensory analysis has been presented. The principle of operation of potentiom etric sensor composed of several Ion Selective Electrodes or All Solid State Electrodes with polymeric membranes and macromolecular chemical compounds sensitive to substances...
-
Electrochemical approach to evaluate the interlayer adhesion of organic coatings
PublicationZastosowano elektrochemiczną spektroskopię impedancyjną do wyznaczania międzywarstwowej adhezji w powłokach organicznych. Zbadano różne zestawy powłok do ochrony samochodów. Zastosowano dwie elektrody wykonane z prądoprzewodzącego tuszu umieszczone pomiędzy warstwami powłokowymi. Stwierdzono, że utrata adhezji międzywarstwowej następuje podobnie jak zmiany energii aktywacji przewodnictwa jonowego w obszarze międzywarstwowym. Uzyskane...
-
Application of higher order statistics in the analysis of electrochemical processes
PublicationZjawiska nieliniowe są często spotykane w elektrochemicznych pomiarach korozyjnych. Z drugiej strony linearyzacja zagadnień elektrochemicznych jest uznaną i powszechną praktyką. W niniejszej pracy przedstawiono możliwość poszerzenia interpretacji badanych procesów elektrodowych o techniki oparte na analizie widmowej rzędu wyższego od 2. Autorzy skupili się na analizie szumu elektrochemicznego generowanego podczas polaryzacji katodowej,...
-
Electrochemical noise analysis methods for the investigation of corrpsion processes
PublicationProcesy korozji mogą być badane przez obserwacje przepływu ładunków między elektrolitem a korodującą elektrodą metalową. Przepływy te są obserwowane jako fluktuacje prądu i napięcia nazywane szumem elektrochemicznym. Różne rodzaje procesów korozji mogą być identyfikowane za pomocą szumów elektrochemicznych. Szybkość korozji jednorodnej jest określana przez estymację rezystancji polaryzacji występującej między elektrolitem a metalem....
-
On accurracy of polarization resistance estimation by electrochemical noise measurements
PublicationPrzedstawiono sposób estymacji rezystancji polaryzacji, wykorzystywanej do oceny szybkości procesów korozji. Zaproponowano formułę określającą błąd losowy estymacji rezystancji polaryzacji. Przytoczono i przedyskutowano eksperymentalne wyniki estymacji rezystancji polaryzacji na podstawie pomiarów szumów elektrochemicznych w układzie trzech elektrod pomiarowych.
-
Analysis of spontaneous electrochemical oscillations by the wavelet transformation method.
PublicationW pracy została przedstawiona nowa metoda analizy oscylacji prądu, które związane są z anodowym roztwarzaniem metali. Transformacja falkowa jest używana do rozdzielenia i analizy spektralnej pojedynczych przebiegów elementarnych komponentów oscylacji elektronicznych. Zastosowana została metoda rozkładu energii oscylacji analogiczna do funkcji spektralnej gęstości mocy.Wykazano, że chaotyczne składniki (chaos Shilnikova)...
-
Application of non-stationary techniques in the analysis of electrochemical noise.
PublicationKlasyczne podejście do analizy szumu elektrochemicznego oparte jest na wstępnym założeniu jego stacjonarności. Pomimo użyteczności, tego typu analiza często prowadzi do mylących wniosków, wynikających z niestacjonarności rejestrów szumowych. W pracy przedstawione zostały możliwości krótkoczasowej transformacji Fouriera, umożliwiającej uzyskanie zależnych od czasu widm mocy sygnału. Osiągane jest to dzięki wykorzystywaniu ruchomego,...
-
Analysis of spontaneous electrochemical oscillations by energy distribution technique
PublicationAnaliza niestacjonarnych oscylacji elektrochemicznych wskazuje na konieczność stosowania technik umożliwiających śledzenie zmian w czasie takich parametrów oscylacji jak częstotliwość, amplituda, pasmo częstotliwościowe. Algorytm prowadzący do uzyskania tych parametrów może być oparty o jeden z liniowych lub kwadratowych sposobów przedstawienia rejestru oscylacji w dziedzinie czasu i częstotliwości. W pracy autorzy przedstawiają...
-
Methods of electrochemical noise analysis for investigation of corrosion processes
PublicationKorozja elektrochemiczna może być oceniana za pomocą przpływu ładunków między korodującym metalem a elektrolitem. Zwykle, przpływ ładunku obserwuje się w układzie trzech elektrod jako fluktuacje prądu i napięcia (szumy elektrochemiczne). Na podstawie analizy szumów elektrochemicznych można wykrywać różne rodzaje korozji. Korozja jednorodna jest oceniana za pomocą wartości rezystancji polaryzacyjnej występującej między metalem a...