Filters
total: 1116
filtered: 554
Search results for: MATERIALS ENGINEERING
-
Modelling of Edge Insulation Depending on Boundary Conditions for the Ground Level
Publication -
Porosimetric, Thermal and Strength Tests of Aerated and Nonaerated Concretes
Publication -
New method of processing heat treatment experiments with numerical simulation support
Publication -
Meta-Design and the Triple Learning Organization in Architectural Design Process
Publication -
Influence of the Organizational Schemes of the Construction Process on the Quality of the Structures Erected Based on Selected Legal Aspects from Russia, Slovakia, and Poland
Publication -
Comparison of ANN Classifier to the Neuro-Fuzzy System for Collusion Detection in the Tender Procedures of Road Construction Sector
Publication -
Modelling Negotiations of Construction Subcontract based on a Game Theory – Results of an Experiment
Publication -
Long Short-Term Memory (LSTM) neural networks in predicting fair price level in the road construction industry
Publication -
Managing Delays in Construction Projects Aiming at Cost Overrun Minimization
Publication -
Loads from Compressive Strain Caused by Mining Activity Illustrated with the Example of Two Buildings in Silesia
Publication -
Application of decision–making parametric structures in the analysis of a compound planetary gear
Publication -
Shot peening intensity effect on bending fatigue strength of S235, S355 and P460 structural steels
Publication -
CARBOCHAIN POLYMER-GLUCOSE HYBRIDS: SYNTHESIS, THERMAL/MECHANICAL PROPERTIES AND BIODEGRADABILITY
Publication -
Adhesion of AlCrN coating deposited on TiB2/Ti composites sintered by SPS dedicated for high temperature tribological applications
Publication -
The method of tribotesting of PVD coated elements in oscillation motion at high temperature
Publication -
Assesment of (Mn,Co)3O4powders for possible coating material for SOFC/SOEC interconnects
PublicationIn this work (Mn,Co)3O4 spinel powders with different Mn:Co ratio (1:1 and 1:2) and from different commercial suppliers are evaluated for possible powder for production of interconnect coatings. Sinterability of the powders is evaluated on pressed pellets sintered in oxidizing and in reducing/oxidizing atmospheres. For selected powder, coatings are then prepared by the electrophoretic deposition method on Crofer 22 APU stainless...
-
DESIGN AND CALIBRATION OF ROLLING RESISTANCE TEST TRAILER R2mk.2
PublicationThe paper describes construction nad calibration procedures of the rolling resistance test trailer R2 Mk2. The trailer is design to measure rolling resistance of passenger car tyres in various road conditions on trafficked road. The trailer utilizes so called angle method also known as vertical arm method. The paper presents also calibration procedures that are necessary to ascertain good precision of the measurements.
-
Small Hydropower Plants in Pomerania: The Example of Evolution of Modern Industrial Brick Architecture
PublicationModernism is usually recognized and associated with the aesthetics of the International Style, represented by white-plastered, horizontally articulated architecture with skimpy decoration, where function was the main imperative of the architects’ ambitions. The brick face of Modernism in Northern Europe reflected, in fact, the complexity of the modern change, breaking ties with the historic styles of the 19th century and being...
-
Teaching Architecture – contemporary challenges and threats in the complexity of built environment
PublicationThe complexity of the modern built environment is a problem n ot only of architectural and urban issues. This issue extends to many othe r disciplines as well as covering a wide range of social engagements. The idea of writing this pa per is generally initiated by the debate which took place in Gdańs k on 22.01.2016, and was prepar ed in order to meet representatives of the four circles of interest...
-
Effect of the Road Environment on Road Safety in Poland
PublicationRun-off-road accidents tend to be very severe because when a vehicle leaves the road, it will often crash into a solid obstacle (tree, pole, supports, front wall of a culvert, barrier). A statistical analysis of the data shows that Poland's main roadside hazard is trees and the severity of vehicles striking a tree in a run-off-road crash. The risks are particularly high in north-west Poland with many of the roads lined up with...
-
The application of non-destructive methods in the diagnostics of the approach pavement at the bridges
PublicationThe article presents the possibility of using non-destructive methods of road pavement diagnostics as an alternative to traditional means to assess the reasons for premature cracks adjacent to bridge objects. Two scanning methods were used: laser scanning to measure geometric surface deformation and ground penetrating radar (GPR) inspection to assess the road pavement condition. With the use of a laser scanner, an effective tool...
-
Analytical tools for functional assessment of architectural layouts
PublicationFunctional layout of the building, understood as a layout or set of the facility rooms (or groups of rooms) with a system of internal communication, creates an environment and a place of mutual relations between the occupants of the object. Achieving optimal (from the occupants’ point of view) spatial arrangement is possible through activities that often go beyond the stage of architectural design. Adopted in the architectural...
-
Contemporary Spaces of Memory - Towards Transdisciplinarity in Architecture
PublicationThe paper explores new phenomena in the contemporary practice of commemoration implemented through architecture. Architectural objects related to memory can be a place where new trends and phenomena appear earlier than in other architectural objects. The text is an attempt to prove that these new spaces of memory are a kind of laboratory where new ideas taking place in architecture and related disciplines are being tested. Research...
-
Pedestrian Safety in Road Traffic in Poland
PublicationEvery third road accident in Poland involves a pedestrian as a participant or, most of the time, a casualty. Pedestrian accidents are usually the result of complex situations and the outcome of a number of factors related to driver and pedestrian behaviour and road infrastructure. Safety depends largely on how well the traffic condition is perceived and on visibility in traffic. The paper presents the results of analyses of methodologies...
-
Cast iron in the 19th-century building equipment
PublicationCast iron is a material, characteristics of which enable to receive extremely artistic elements. It maintains good strength properties at the same time. That combination of these seemingly contrary traits makes it a commodity that was widely used in the 19th century industry and architecture. These usages were not only as decorative elements, technical and structural ones. The production of new household utilities started, which...
-
Buenos Aires – Toward Comprehensive Development and Sustainable Mobility
PublicationThis paper is introducing Buenos Aires’ achievements and challenges in implementing comprehensive development and integrating efficient and sustainable transport system within its urban structure. There are several important steps in this process starting from urban regeneration of Puerto Madero, the introduction and then implementation of a strategic plan Modelo territorial (2010) and of Buenos Aires' Plan de Movilidad Sustentable...
-
Influence of bitumen type on cracking resistance of asphalt mixtures used in pavement overlays
PublicationCracking is one of the predominant distresses occurring in flexible pavements, especially in old pavements that were rehabilitated with an asphalt overlay. In such cases asphalt mixtures should be designed to ensure high resistance to reflective cracking because new asphalt layers are exposed to existing cracks of the old pavement. The nature of these cracks can be various (transverse, longitudinal as well as crazy cracking). One...
-
Architectural Symbols of a City – Case Study
PublicationThe identity of a city is understood as a collection of individual features, which give the city its individual character and distinguish it from other places; it undoubtedly constitutes a cultural value, which should be cherished. In the case of Sopot – a spa located on the Bay of Gdansk, the mosaic of its geographical location, landscape values, urban layout and historic architecture has created a unique image of a seaside resort....
-
Settlement Networks in Polish Spatial Development Regional Plans
PublicationIn 1999, ten years after the great political changes in Poland, 16 self-governed regions (in Polish: voivodeship) were created. According to Polish law, voivodeship spatial development plans, or regional plans in short, determine basic elements of the settlement network. No detailed regulations indicate the specific elements of the settlement network or what features of these elements should be determined. For this reason, centres...
-
Providing Public Space Continuities in Post-Industrial Areas through Remodelling Land/Water Connections
PublicationThis article examines the problem of urban transformation strategies applied in recent years which are based on the creation of new water areas and modification of existing ones. The research is an attempt to prove that modifications of plans of water areas and forms of their borders may play an important role in achieving the best quality public spaces in post-industrial territories. The basis for demonstrating the importance...
-
Field investigation of low-temperature cracking and stiffness moduli on selected roads with conventional and high modulus asphalt concrete
PublicationHigh Modulus Asphalt Concrete (HMAC) was introduced in Poland as a one of the solutions to the problem of rutting, type of deterioration common in the 1990s. After first encouraging trials in 2002 HMAC was widely used for heavily loaded national roads and motorways. However some concerns were raised about low-temperature cracking of HMAC. This was the main reason of the studies presented in this article were started. The article...
-
Effect of interlayer bonding quality of asphalt layers on pavement performance
PublicationThe quality of interlayer bonding at the interfaces between the asphalt layers in flexible pavements affects the overall pavement performance. Lack or partial lack of interlayer bonding between asphalt layers can cause pavement's premature failures such as rutting, slippage of the wearing course, cracking or simply a reduction in the calculated fatigue life of the pavement structure. This paper shows the case studies of investigation...
-
Gas sampling system for matrix of semiconductor gas sensors
PublicationSemiconductor gas sensors are popular commercial sensors applied in numerous gas detection systems. They are reliable, small, rugged and inexpensive. However, there are a few problem limiting the wider use of such sensors. Semiconductor gas sensor usually exhibits a low selectivity, low repeatability, drift of response, strong temperature and moisture influence on sensor properties. Sample flow rate is one of the parameters that...
-
Low cost electrochemical sensor module for measurement of gas concentration
PublicationThis paper describes a low cost electrochemical sensor module for gas concentration measurement. A module is universal and can be used for many types of electrochemical gas sensors. Device is based on AVR ATmega8 microcontroller. As signal processing circuit a specialized integrated circuit LMP9l000 is used. The proposed equipment will be used as a component of electronic nose system employed for classifying and distinguishing...
-
Investigation of solid polymer electrolyte gas sensor with different electrochemical techniques
PublicationIn this work solid polymer electrolyte (SPE) amperometric sulphur dioxide sensor is investigated. Nafion was used as a membrane electrode and 1M sulphuric acid as an internal electrolyte. Sensor response to sulphur dioxide was measured. Besides traditional constant voltage amperometry also different electrochemical techniques were used. Results obtained by these methods are compared.
-
Analysis of pavement structure sensitivity to passage of oversized heavy duty vehicle in terms of bearing capacity
PublicationOversized heavy duty vehicles occur in traffic very rarely but they reach extremely high weights, even up to 800 tonne. The detrimental impact of these vehicles on pavement structure is much higher than in case of commercial vehicles that comprise typical traffic, thus it is necessary to assess the sensitivity of pavement structure to passage of oversized vehicles. The paper presents results of sample calculations of load equivalency factor...
-
Reshaping of Coastlines as the Beginning of Urban Structures Changes in North Poland
PublicationThis article discusses the problem of strategies concerning the processes of re-shaping the Baltic Sea southern coastline applied recently in North Poland. The undertaken research is an attempt to identify the relationship between the modifications of coastline forms and the positive changes of urban structures. It can be seen that these modifications are needed because of the problems of existing shoreline erosion. It can be also...
-
Increasing efficiency of technological process by limiting impact of corrosive environment on operation of spiral classifiers
PublicationMost of the technological operations related to the preparation of the output to be enriched and to the production of the final copper concentrate take place with the use of water environment. Water management, besides using innovative technical and technological solutions, is a significant factor in the whole copper ore enrichment process. Mine water resources and surface water of the tailing pond named "Żelazny Most" are the...
-
TIRE/ROAD NOISE AND TIRE ROLLING RESISTANCE ON PROTOTYPE PERS SURFACE
PublicationPoroelastic road surfaces are characterized by low noise of tires running on them.Road pavements of this type are promising solution to problems related to traffic noise in cities and on rural roads. Some technical problems still have to be solved, in particular regarding durability and skid resistance on wet surface. Ongoing and planned works are to contribute to create a quiet, durable and safe road surface, which will become...
-
A modelling approach to the transport support for the harvesting and transportation complex under uncertain conditions
PublicationThe article proposes a modelling approach based on structural and parametric identification of the transport support of the harvesting and transportation complex. The efficiency and effectiveness of the proposed methods of structural and parametric identification for the development of a system for harvesting and transportation complex operation has been proved. A mathematical model based on fuzzy logic has been developed. It reflects...
-
Influence of Wood Moisture on Strength and Elastic Modulus for Pine and Fir Wood Subjected to 4-point Bending Tests
PublicationThe main purpose of this research paper was to determine the influence of the wood moisture on the strength and elastic modulus of pine and fir wood specimens subjected to the 4-point bending tests. Six bending tests for each wood species and for two different moisture level have been performed. Then, the advanced statistical analysis of the results has been carried out. On the basis of the obtained results, it has been noted that...
-
Modelling Signalised Intersections Reliability of Functioning
PublicationThe article addresses a fundamental aspect of traffic, i.e. the operation of traffic signals at intersections, in reference to the reliability theory. In many cases, when intersections carry substantial amounts of traffic, selecting control parameters to produce satisfactory traffic conditions is quite difficult. Design methods do not cover all possible situations which are the result of intersection geometry and location...
-
Criteria for evaluation and selection of the best offer for the Contract Engineer service
PublicationThe purpose of the legal regulations regarding public procurement in EU countries is to ensure effective funds' spending. When assessing and selecting the best offer, the contracting entities have at their disposal many different criteria, including non-price criteria. Their proper selection and application is necessary to ensure the high quality of the ordered product, delivery or service. Making an order for intellectual services,...
-
Real-time monitoring of volatiles and particles emitted from thermoplastic filaments during 3D printing
PublicationThe proliferation of consumer-grade three-dimensional (3D) printers using fused deposition, also known as fused filament fabrication, has given rise to concerns over the exposure of users to potentially harmful substances. Thermoplastic filaments made of different polymers are extruded through a heated printer nozzle and deposited layer by layer on a build platform to form the printed object. This process leads to the emission...
-
Non-destructive Testing of Wooden Elements
PublicationExamining the condition of wooden elements is crucial from the perspective of proper structure performance. If the deterioration in the internal wood condition, which displays no symptoms visible from the outside, is detected, the further spread of the deterioration can be prevented. Test results often point to the necessity of conducting repairs and, renovations, replacing the structure of wooden beams, or even substituting a...
-
Risks to Older People in Road Traffic
Publicationhe article looks at road traffic risks and main trends from the perspective of older road users (drivers, cyclists, pedestrians). With a longer time to react, poor eyesight and hearing, impaired mobility, ill health and medication, older road users are put at risk. A comprehensive and pro-active strategy is needed to deal with these risk factors and meet the safety and mobility needs...
-
Road Restraint Systems as a Basis for Roadside Safety Improvement
PublicationRoadside-related crashes occur when vehicles run off the road. The majority of the crashes have severe outcomes, especially when an object is hit (tree, pole, supports, front wall of a culvert, barrier). These accidents represent app. 19% of all of Poland's road deaths. Roadside crashes involve: hitting a tree, hitting a barrier, hitting a sign or utility pole, vehicle roll-over on the roadside, vehicle roll-over on a slope and...
-
Effects of Road Infrastructure on Pedestrian Safety
PublicationThe objective of the work was to identify risks for pedestrians that involve road infrastructure and roadside and to define how selected elements of geometry and traffic layout affect driver behaviour (speed on approaching pedestrian crossings). The results have helped to formulate recommendations on pedestrian crossing design. The research included an analysis of 2013-2017 statistics to identify the...
-
Application of multi-criteria method to assess the usefulness of a hydrotechnical object for floating housing
PublicationThis publication presents the analysis of three hydrotechnical objects located in the Municipality of Gdańsk with a view of mooring Floating Houses. The assessment of the adaptation of a hydrotechnical object has been carried out by a multi- criteria method AHP and using the main criteria such as: mooring system, communication with the mainland, availability of the utility networks, waste disposal and location of the parking spaces....
-
Museum Institutions in Monuments - Positive and Negative Aspects of Adaptation: The New Amber Museum and Museum of Science in Gdansk, Poland
PublicationThe issue of the creation and location of new museums is a current topic. The decision of where and how to create new museum facilities will impact successful function in the future. Museums are either located in newly designed buildings or in existing buildings. In general, existing buildings adapted for museum use are either formally under conservational protection or not. With regard to museum location in preserved monuments,...