Filters
total: 472
-
Catalog
Search results for: CONTROL,TECHNOLOGICAL PROCESSES,SHIP AUTOMATION
-
Negative impact of constant RPM control strategy on ship NOx emission in waves
PublicationIn severe wave conditions, the ship propulsion system is loaded with high fluctuations due to external disturbances. The highly fluctuating loads enforce radical changes in the main engine torque, which in turn demands variation of the fuel rate injected into the cylinders if a constant rotational speed strategy is applied. Therefore, the temperature of gases varies to a large extent during the combustion process in the cylinders....
-
New Procedures for Control of Industrial Effluents Treatment Processes
PublicationThis work presents the procedures for monitoring volatile organic compounds during treatment of industrial effluents. The investigation was carried out for a specific effluent—caustic effluent from bitumen production. The developed procedures enable more detailed control of the effectiveness of wastewater treatment than standard procedures. Caustic effluents from bitumen production have a complex physicochemical form and consist...
-
The Matter of Decision-Making Control Over Operation Processes of Marine Power Plant Systems with the Use of their Models in the form of Semi-Markov Decision-Making Processes
PublicationThe article presents the possibility to control the real operation process of an arbitrary device installed in the marine power plant based on the four-state semi-Markov process, being the model of the process, which describes the transition process of operational states of the device and the transition process of its technical states. All these states are precisely defined for the ship main engine (SG). A hypothesis is proposed...
-
A decision-making module for aiding ship system automation design; A knowledge-based approach
PublicationZastosowanie elementów sztucznej inteligencji, w tym systemów z bazą wiedzy staje się coraz bardziej powszechne przy komputerowo wspomaganym projektowaniu. Proces projektowy związany jest z wieloma problemami decyzyjnymi, jak: wybór struktury podsystemu, podzespołów czy też elementów składowych. Z tego względu zdecydowano się opracować system z bazą wiedzy z modułem wspirającym proces podejmowania decyzji.W artykule przedstawiono...
-
Assesment of operation of ship main diesel engine using the theory of semi-markovian and markov processes.
PublicationTo precisely determine the task it is necessary to specify also its duration time, apart from conditions in which it will be realized. When considering propulsion engine, i.e. the main element of ship propulsion system, especially important becomes not only the problem which amount of energy could be at one's disposal but also within which time interval it could be delivered. Therefore apart from applying the commonly used reliability...
-
The Impact of Technological Processes on Odorant Emissions at Municipal Waste Biogas Plants
Publication -
International Journal of Automation and Control
Journals -
International Journal of Control and Automation
Journals -
Fuzzy control of a ship propulsion system
PublicationReferat przedstawia analizę i syntezę układu sterowania napędu statku przy zastosowaniu teorii sterowania rozmytego. Układ napędowy jest układem bezpośrednim, wyposażonym w silnik spalinowy wolnoobrotowy oraz śrubę okrętową ze zmiennym skokiem. Przedstawiono także wyniki badań symulacyjnych a następnie porównano wyniki badań symulacyjnych przy zainstalowaniu regulatora rozmytego z analogicznymi wynikami, gdy zastosowano regulator...
-
The application of an expert system for simulation investigations in yhe aided design of ship power systems automation.
PublicationPrzedstawiono strukturę i funkcje systemu wspomagającego projektowanie automatyki systemów enegretycznych statków. Dane opisujące projektowany podsystem energetyczny są wprowadzane w trybie interaktywnym do systemu ekspertowego. Reguły określaja poprawność formalną i merytoryczną wprowadzonych danych. W przypadku braku błędów system automatycznie tworzy model symulacyjny projektowanego podsystemu enegretycznego i wywołuje program...
-
Robert Piotrowski dr hab. inż.
PeopleRobert Piotrowski jest absolwentem Wydziału Elektrotechniki i Automatyki (2001r., kierunek: Automatyka i Robotyka) oraz Wydziału Zarządzania i Ekonomii (2002r., kierunek: Organizacja Systemów Produkcyjnych) Politechniki Gdańskiej. Od 2005 roku jest zatrudniony na Wydziale Elektrotechniki i Automatyki, aktualnie w Katedrze Inteligentnych Systemów Sterowania i Wspomagania Decyzji. W 2005 roku obronił rozprawę doktorską (Automatyka...
-
The effectiveness of organic matter removal in unit processes of the technological groundwater treatment system
Publication -
Two-Level Multivariable Control System of Dissolved Oxygen Tracking and Aeration System for Activated Sludge Processes
PublicationThe problem of tracking dissolved oxygen is one of the most complex and fundamental issues related to biological processes. The dissolved oxygen level in aerobic tanks has significant influence on behaviour and activity of microorganism inhabiting the plant. Aerated tanks are supplied with air from an aeration system (blowers, pipes, throttling valves, diffusers). It is a complex dynamic system governed by nonlinear hybrid dynamics....
-
Optimal control of multivariable ship propulsion system.
PublicationCelem pracy jest analiza i synteza algorytmu oraz struktury optymalnego regulatora wielowymiarowego układu napędowego statku na podstawie teorii sterowania optymalnego. W tym celu sformułowano oryginalny nieliniowy zero-wymiarowy ciągły w czasie i oparty na chwilowej wartości zmiennej stanu (w odróżnieniu od wartości średnich modelu matematycznego całego układu napędowego statku). Ten model zweryfikowano na podstawie wyników doświadczalnych...
-
Expert systems in quality control of manufacturing processes
PublicationThe paper deals with quality control in conditions of computer integrated manufacturing (CIM). It shows that quality of material stream items have to be analyzed on every stage of manufacturing process. Collecting and analyzing quantity of data with usage of expert systems make it possible to create a system for coordination of cell's work. The system contains error recovery algorithm and adaptive control subsystem based on fuzzy...
-
Dissolved oxygen control for activated sludge processes
PublicationRegulatory do nadążania za trajektorią referencyjną stężenia tlenu w komorze reaktora biologicznego są proponowane i badane. W artykule badany jest nieliniowy regulator predykcyjny oraz regulator adaptacyjny z modelem referencyjnym. Uwzględniono zarówno usuwanie ze ścieków pożywki oraz fosforu za pomocą technologii osadu czynnego. Podejście do projektowania regulatora wykorzystuje strukturę dynamiki rozpuszczonego tlenu i jej dwie...
-
Journal of Control Automation and Electrical Systems
Journals -
Advances in Differential Equations and Control Processes
Journals -
Game theory, as a way for integrating of ship control systems
PublicationReferat przedstawia koncepcję wykorzystania algorytmów zastosowanych w teorii gier do zintegrowania układów sterowania statków, takich jak układ sterowania kursu i trajektorii statku, układ sterowania napędu statku, układ sterowania stabilizacji kołysań bocznych statku, itp. Jest to koncepcja oryginalna.
-
Magdalena Apollo dr inż.
People2017 - PhD in Civil Engineering, thesis: Risk management in construction investments related to urban regeneration projects, Gdansk University of Technology IX 2012–VI 2013 - Postgraduate Studies at Gdynia Maritime University: Research Project Management (IPMA D Certificate) 2010 – MSc in Management and Marketing, Gdansk University of Technology 2007 – MSc in Civil Engineering, Gdansk University of Technology 2007-2010 - structural...
-
Selected problems of technological preparation of production of a two-segment passenger inland waterways ship of a combined structure
PublicationPrzystępując do opracowania założeń do ''Ramowej technologii budowy statku rzecznego'', którego projekt powstaje w ramach zadania INCOWATRANS natknięto się na szereg problemów wynikających z odmienności i prototypowości analizowanego statku. Statek rzeczny to składajacy się z dwóch autonomicznych jednostek zespół pływający. Konstrukcja każdej z wymienionych jednostek jest konstrukcją mieszaną tj. składa się z części o konstrukcji...
-
Towards a Method Evaluating Control Actions in STPA-Based Model of Ship-Ship Collision Avoidance Process
Publication -
Toward a Method Evaluating Control Actions in STPA-Based Model of Ship-Ship Collision Avoidance Process
Publication -
Procedure based functional safety and information security management of industrial automation and control systems on example of the oil port installations
PublicationThe approach addresses selected technical and organization aspects of risk mitigation in the oil port installations with regard to functional safety and security requirements specified in standards IEC 61508, IEC 61511 and IEC 62443. The procedure for functional safety management includes the hazard identification, risk analysis and assessment, specification of overall safety requirements and definition of...
-
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS
Journals -
Semi-Markow Processes as Models of Devices´ Operating Process of Ship Pro-pulsion System
PublicationReferat zawiera formalny opis procesu eksploatacji urządzeń.
-
High performance super-twisting sliding mode control for a maritime autonomous surface ship (MASS) using ADP-Based adaptive gains and time delay estimation
PublicationThis research addresses two kinds of problems related to optimal trajectory tracking of a Maritime Autonomous Surface Ship (MASS): those caused by the time-varying external disturbances including winds, waves and ocean currents as well as those resulting from inherent dynamical uncertainties. As the paper shows, an accurate and robust optimal controller can successfully deal with both issues. An improved Optimal Adaptive Super-Twisting...
-
High performance super-twisting sliding mode control for a maritime autonomous surface ship (MASS) using ADP-Based adaptive gains and time delay estimation
PublicationThis research addresses two kinds of problems related to optimal trajectory tracking of a Maritime Autonomous Surface Ship (MASS): those caused by the time-varying external disturbances including winds, waves and ocean currents as well as those resulting from inherent dynamical uncertainties. As the paper shows, an accurate and robust optimal controller can successfully deal with both issues. An improved Optimal Adaptive Super-Twisting...
-
Impact of sea wave stochastic characteristics on ship propulsion control system design.
PublicationWybrano do rozważań (symulacji komputerowej) 8 rejonów morskich w 4 porach roku. Określono w nich gęstość widmową amplitudy fali morskiej. Założono, upraszczająco, regulator typu PID. Dla wybranego typu statku wykonane badania symulacyjne odnoszą się do wybranych rejonów mórz i pór roku. Okazuje się, że dobierając zarówno współczynnik wzmocnienia regulatora jak i stałą całkowania, można minimalizować wartości wariancji, na przykład,...
-
On the Possibility of Increasing Ship Energy Efficiency Through Improved Propulsion Control System
PublicationThis paper summarizes the analyses conducted to assess the impact of the ship's propulsion control system on energy efficiency in calm, manoeuvre, and sea wave conditions, where the goal of the investigation is to develop new strategies for controlling the ship's motion while considering the interactions between the hull, engine, and propeller.
-
Ship course control system taking into account the steering gear dynamic properties
PublicationW artykule zostały przedstawione różne konfiguracje regulatorów nieliniowych do sterowania kursem statku. Zaprojektowane regulatory oparto na metodzie backstepping, regulatorze PD oraz sterowaniu ślizgowym. Algorytmy uwzględniają na etapie projektowania liniowe własności dynamiczne urządzenia wykonawczo - sterującego maszyny sterowej. Dokonano analizy porównawczej jakości pracy rozpatrywanych struktur sterowania podczas badań symulacyjnych...
-
Michał Grochowski dr hab. inż.
PeopleProfessor and a Head of the Department of Intelligent Control and Decision Support Systems at Gdansk University of Technology (GUT). He is also a Member of the Board of the Digital Technologies Center of GUT. He received his M.Sc. degree in Control Engineering in 2000 from the Electrical and Control Engineering Faculty at the GUT. In 2004 he received a Ph.D. degree in Automatic Control and Robotics from this...
-
CAUSALITY IN MODELS OF THERMAL PROCESSES IN SHIP ENGINE ROOMS WITH THE USE OF BOND GRAPH (BG) METHOD
PublicationWith a single approach to modeling elements of different physical nature, the method of Bond Graph (BG) is particularly well suited for modeling energy systems consisting of mechanical, thermal, electrical and hydraulic elements that operate in the power system engine room. The paper refers to the earlier presented new concept of thermal process modeling using the BG method. The authors own suggestions for determining causality...
-
Suitableness of SLM Manufactured Turbine Blade for Aerodynamical Tests
PublicationsettingsOrder Article Reprints Open AccessArticle Suitableness of SLM Manufactured Turbine Blade for Aerodynamical Tests by Janusz Telega 1,*ORCID,Piotr Kaczynski 1ORCID,Małgorzata A. Śmiałek 2ORCID,Piotr Pawlowski 3ORCID andRyszard Szwaba 1ORCID 1 Institute of Fluid Flow Machinery Polish Academy of Sciences (IMP PAN), Fiszera 14, 80-231 Gdansk, Poland 2 Faculty of Mechanical Engineering and Ship Technology, Institute of Naval...
-
Anna Witkowska dr hab.
PeopleAnnaWitkowska holds an M.Sc. in mathematics and computer science from the University of Gdańsk, Poland in 2001. She received her Ph.D. degree from the Technical University of Warsaw in 2011, and the D.Sc. (habilitation) degree in automation, electronic and electrical engineering from the Technical University of Gdańsk, in 2020. Currently she is a professor of the Gdańsk University of Technology, Faculty of Electrical and Control...
-
Mariusz Deja dr hab. inż.
PeopleAssistant Professor in the Department of Manufacturing Engineering and Automation. He graduated in 1993, obtaining Master degree at the Faculty of Mechanical Engineering, Gdańsk University of Technology in the field of study: Mechanical Engineering, specialization: Technological Process Design. After graduation he worked for the Department of Manufacturing Engineering and Automation and his main research area was associated with...
-
On some aspects of Concurrent Control Processes Modelling and Implementation in LAD Diagram Language With Use of New Generation Engineering Software
Publication -
Joanna Szłapczyńska dr hab. inż.
People -
Jerzy Kowalski dr hab. inż.
People -
Marek Dzida dr hab. inż.
PeopleHe was born on 6 August 1953 in Bielsko-Biała. He is a graduate of the Institute of Shipbuilding at Gdańsk University of Technology. Since 1978 he has been working at Faculty of Ocean Engineering and Ship Technology at GUT. In 1983 he received the title of Doctor of Technical Sciences, and in 2001 – the title of Doctor with habilitation. He is currently employed as Associate Professor at GUT. He worked as vice-dean for Education...
-
Paweł Możejko dr hab.
People -
Natalia Stawicka-Morawska dr inż.
PeopleMgr inż. Natalia Stawicka-Morawska pracuje na Politechnice Gdańskiej od października 2017 r. na stanowisku Asystenta, na Wydziale Inżynierii Mechanicznej i Okrętownictwa (poprzednio: Wydziale Mechanicznym), w Instytucie Mechaniki i Konstrukcji Maszyn (poprzednio: Katedrze Mechaniki i Mechatroniki).Prowadzona przez nią działalność naukowa dotyczy dziedziny nauk technicznych w dyscyplinie naukowej budowa i eksploatacja maszyn. Główną...
-
Technological effect comparison of abrasive and plastic working. Production Processes and Systems**2002 vol. 1 s. 89-98, 9 rys. 2 tabl. bibliogr. 6 poz Publication of the University of Miskolc. Porównanie technologicznych efektów obróbki ściernej i plastycznej.
PublicationPrzedstawiono wyniki badań porównawczych próbek obrobionych wykańczająco przez szlifowanie i docieranie oraz przez powierzchniową obróbkę plastyczną przez nagniatanie ślizgowe. Podano także konstrukcje narzędzi i przykłady stosowania badanych metod obróbki.
-
International Conference on Control, Automation, Robotics and Vision
Conferences -
IEEE Symposium on Computational Intelligence in Control and Automation
Conferences -
International Conference on Informatics in Control, Automation and Robotics
Conferences -
Aneta Łuczkiewicz prof. dr hab. inż.
PeopleI conduct research on the adaptive abilities of microorganisms and their potential use in supporting technological processes. I combine environmental engineering with elements of biomedical and materials engineering. I am interested in innovative methods for detecting clinically significant microorganisms in aquatic environments (so-called wastewater-based epidemiology) and advanced and practical solutions in the water management...
-
Piotr Chrzan prof. dr hab. inż.
PeopleUrodził się w 1954 r. w Sopocie. Jest absolwentem Wydziału Elektroniki Politechniki Gdańskiej (1978). W 1980 r. podjął pracę na Wydziale Elektrycznym w zespole prof. Jerzego Jaczewskiego. W 1988 r. uzyskał stopień naukowy doktora nauk technicznych, habilitację w 1999 r., w zakresie elektrotechniki: energoelektroniki i automatyki napędu, a tytuł profesora w 2017 r. Był promotorem 6 obronionych prac doktorskich (w tym 3 z wyróżnieniem)....
-
Mohammad Hossein Ghaemi dr inż.
PeopleMohammad Hossein Ghaemi Mohammad Hossein Ghaemi (1967), is an Assistant Professor at the Faculty of Mechanical Engineering and Ship Technology - WIMiO (till 2020: Faculty of Ocean Engineering and Ship Technology), Department of Automatics and Marine Energy Engineering. He studied first at Tehran University, where was graduated in the field of Mechanical Engineering (Solid Mechanics). Then he received his MSc degree in the area...
-
International Conference on Computational Intelligence for Modelling, Control and Automation
Conferences