Search
Search results for: CRUSHABLE FOAM PLASTICITY
-
Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test
PublicationIn the paper behaviour of laminated sandwich beams (FRP face sheet – PET foam core – FRP face sheet) subjected to three point bending is studied. The paper aim is to find practical descriptions enabling effective and accurate estimation of the elastic response, damage and failure of the beams, basing on experiments and static calculations. Therefore a number of tests are described, that were done on laminated coupons and foam specimens...
-
Application of foam made of post-consumer pet materials for the construction of footbridges
PublicationThe article presents the possibility of application in civil engineering of highly ecological PET foam, manufactured from 100% recycled plastic packaging. It may find uses in construction of numerous engineering structures, such as pedestrian and cycle footbridges. Properly processed waste from post-consumer PET packaging may constitute a quality structural core for use in multilayered composite materials, commonly referred to...
-
Jumping Wave Characteristic during Low Plasticity Burnishing Process
PublicationDuring the low plasticity burnishing process of soft materials such as carbon steel with a hardness of up to 40 HRC (Rockwell grade) a raised structure of the material known as the Jumping Wave forms in front of the tool roll. This phenomenon significantly disturbs the burnishing process, but is very poorly described in the literature. This article presents studies of this phenomenon on the example of burnished 1.0562 steel. The...
-
Size effects in wedge indentation predicted by a gradient-enhanced crystal-plasticity model
Publication -
Increasing the Seismic Resistance of Wood-frame Buildings by Applying PU Foam as Thermal Insulation
PublicationWood-frame buildings are very common in regions that are exposed to earthquakes. Most of residential buildings are constructed using this technology; therefore, the seismic resistance of them is really essential in order to prevent human losses and structural damage. The aim of the present article is to show the results of the detailed numerical FEM analysis focused on the seismic behaviour of the wood-frame house with different...
-
Microstructure, mechanical properties, and flame retardancy of nanoclay-incorporated polyurethane flexible foam composites
PublicationThe present work seeks to investigate microstructure, mechanical properties, and flame retardancy of polyurethane/nanoclay flexible foam composites. In this regard, we prepared various nanocomposites with and without nanoclay and observed the resulting morphologies to correlate them with the other corresponding characteristics. The results provided support for the fact that tensile strength and compression set will increase with...
-
Plasticity of Bead-On-Plate Welds Made with the Use of Stored Flux-Cored Wires for Offshore Applications
PublicationExtreme atmospheric conditions in the marine and offshore industry are harmful to engineering materials, especially to welded joints, and may cause degradation of their properties. This article presents the results of research on the plasticity of bead-on-plate welds made using two types of seamless, copper plated flux-cored wires. Before welding, spools with wire were stored for 1 month in two distinct locations with different...
-
Theory of Elasticity and Plasticity
e-Learning CoursesThis course discusses the general theory of elastic and plastic material behavior of solids.
-
Timber-frame house resistant to dynamic loads - analysis of wall panel filled with polyurethane foam
PublicationThe present study shows the experimentally and numerically determined response of a single timber-frame house wall panel filled with polyurethane (PU) foam under dynamic loads. The harmonic tests were conducted for the following frequencies: 0.5 Hz, 1.0 Hz, 2.0 Hz and 5.0 Hz for various values of the specified displacement. Based on the results of the comparison between the experimental tests and the numerical analyses, the numerical...
-
XRD-Ni foam as received and oxidised at 500_C
Open Research DataThese data contain XRD patterns of porous nickel foam commercial and oxidised in air at 500 C degrees for 8 hours.
-
Theory of Elasticity and Plasticity 2023
e-Learning CoursesThis course discusses the general theory of elastic and plastic material behavior of solids.
-
Theory of Elasticity and Plasticity 2024
e-Learning CoursesThis course discusses the general theory of elastic and plastic material behavior of solids.
-
Ground Tire Rubber Filled Flexible Polyurethane Foam—Effect of Waste Rubber Treatment on Composite Performance
PublicationThe application range of flexible polyurethane (PU) foams is comprehensive because of their versatility and flexibility in adjusting structure and performance. In addition to the investigations associated with further broadening of their potential properties, researchers are looking for new raw materials, beneficially originated from renewable resources or recycling. A great example of such a material is ground tire rubber (GTR)—the...
-
Problems of Strength and Plasticity
Journals -
Analysis of Validation and Simplification of Timber-Frame Structure Design Stage with PU-Foam Insulation
PublicationThe transition from experimental studies to the realm of numerical simulations is often necessary for further studies, but very difficult at the same time. This is especially the case for extended seismic analysis and earthquake-resistant design. This paper describes an approach to moving from the experimental testing of an elementary part of a wood-frame building structure to a numerical model, with the use of a commercial engineering...
-
Damaged plasticity model - seismic analysis of structure of the Petronas Twin Towers (Kuala Lumpur) in Malaysia
PublicationThe article presents numerical simulations for the modelling of seismic impact on the structure of Petronas Twin Towers (Kuala Lumpur) in Malaysia with application of two methods. The Response Spectrum method, in which a spectrum of the structure's responses to an earthquake's impact is generated and the Acceletogram (BETA) method, in which we generate dynamic load in the form of a diagram of the connection between acceleration...
-
An experimental investigation of the influence of plasticity on creep degradation rate
Publication -
An experimental investigation of the influence of plasticity on creep degradation rate
Publication -
XPS-Ni foam as received, after photocatalysis and after oxidation at 500_C.
Open Research DataThis dataset contains XPS spectra recorded for nickel foam as received from supplier, after photocatalytic process and after oxidation at 500C. Each set contains: survery spectrum, O1, C1s, Ni2p. The detailed equipment and measurement data was described in "readme XPS.txt" file
-
Hierarchical MnO2 nanoflowers blooming on 3D nickel foam: A novel micro-macro catalyst for peroxymonosulfate activation
PublicationIn this work, birnessite-type δ-MnO2 nanoflowers were uniformly deposited on 3D nickel foam (NF) by one-step hydrothermal route for high-efficient activation of peroxymonosulfate (PMS) towards degradation of acid orange 7 (AO7). High specific surface area, large pore volume and 3D hierarchical structure promotes the mass and electron transfer for great catalytic activity. Low reaction energy barrier (Ea=27.5 kJ/mol) and outstanding...
-
Application of Peracetic Acid for Biological Foam Elimination in the SBR Bioreactor
PublicationPrzedstawiono wyniki wstępnych badań nad zastosowaniem kwasu nadoctowego (PAA) do likwidacji piany biologicznej, spowodowanej przez bakterię nitkowatą Microthrix parvicella. Wykazano, że okresowe zraszanie powierzchni piany małymi dawkami kwasu nadoctowego (rzędu kilkudziesięciu ml 1% roztworu PAA/na 1 m2 piany o grubości 1 cm) powoduje niemal natychmiastwy zanik piany, wytworzonej na powierzchni osadu czynnego w bioreaktorze...
-
Thermodynamically consistent gradient theory of damage coupled with gradient plasticity
PublicationPrzedstawiono termodynamicznie zgodną teorię plastycznego zniszczenia w zakresie mechaniki Newtona-Eshelbego. Poza klasycznymi równaniami ruchu w przestrzeni fizycznej sformułowano dynamiczne równania równowagi sił powiązanych z defektami w przestrzeni materialnej oraz pierwsze i drugie prawo termodynamiki w przestrzeni fizycznej i materialnej. Ogólne równania konstytutywne przyjęto jako funkcję gradientu deformacji, jego składników...
-
One More Step Towards a Circular Economy for Thermal Insulation Materials—Development of Composites Highly Filled with Waste Polyurethane (PU) Foam for Potential Use in the Building Industry
PublicationThe rapid development of the building sector has created increased demand for novel materials and technologies, while on the other hand resulting in the generation of a severe amount of waste materials. Among these are polyurethane (PU) foams, which are commonly applied as thermal insulation materials. Their management is a serious industrial problem, due to, for example, their complex chemical composition. Although some chemical...
-
Photocatalytic decomposition of acetaldehyde over TiO2 (titanium dioxide) supported on nickel foam and Ni-doped (nickel-doped) TiO2
Open Research DataThis dataset contains chromatograms recorded during the decomposition of acetaldehyde in a high-temperature reaction chamber under UV irradiation using as photocatalytic systems TiO2 (titanium dioxide) supported on nickel foam, TiO2 supported on oxidized nickel foam and TiO2 doped by metallic nickel (Ni) powder. The detailed equipment and measurement...
-
Thermal properties of polyurethanes synthesized using waste polyurethane foam glycolysates
PublicationW pracy przedstawiono wyniki analizy termicznej (DMTA i TG-FTIR) glikolizatów i otrzymanych z nich poliuretanów. Glikolizaty uzyskiwano w reakcji odpadowej pianki poliuretanowej z 1,6 heksametylenodiolem (HDO) przy różnym stosunku masowym pianki do HDO (1:1 - 10:1). Poliuretany syntezowano metodą dwuetapową z prepolimeru (diizocyjanian MDI + glikolizat), który przedłużano handlowym małocząsteczkowym glikolem.
-
Al(III) and Cu(II) simultaneous foam separation: Physicochemical problems
PublicationSimultaneous removal of Al(III) and Cu(II) from dilute aqueous solutions by ion and precipitate flotation methods is investigated. Influence of the pH of the initial solution, the surface active collector concentration and the gas flow rate on the final removal ratio and the course of ion and precipitate flotations is presented. Results show that simultaneous flotations of Al(OH)3 and Cu(OH)2 insoluble species occur allowing to...
-
Lightweight Cement Mortars with Granulated Foam Glass and Waste Perlite Addition
Publication -
FE-modelling of strain localization in concrete with coupled elasto-plasticity and damage
PublicationW artykule przedstawiono wyniki numerycznej dla zginania belki betonowej przy zastosowaniu modelu sprężysto-plastycznego, modelu z degradacja sztywności i modelu połączonego sprężysto-plastycznego z degradacją sztywności. Wszystkie modele rozszerzono o długość charakterystyczną mikrostruktury za pomocą teorii nielokalnej.
-
Morphological and electrochemical characterization of ceramic carbon foam electrodes water treatment applications
Open Research DataThis dataset contains morphological and electrochemical characterization of ceramic carbon foam employed as an electrode (CFFE) for the oxidation of a target pollutant. The dataset includes:
-
Theory of Elasticity and Plasticity - Civil Engineering, sem. I
e-Learning CoursesPreliminaries in Solid Body Mechanics focused on 2D and 3D engineering structures, in analytical approach
-
Operational Properties Investigation of The Flat-Plate Solar Collector with Poliuretane Foam Insulation
Publication -
Enhanced Degradation of Ethylene in Thermo-Photocatalytic Process Using TiO2/Nickel Foam
Publication -
Static and dynamic properties of light PU foam for building the shallow river barges
PublicationPrzedstawiono wyniki badań wytrzymałości statycznej na rozciąganie, ściskanie i ścinanie oraz zmęczeniowej przy obciążeniach ściskających jednostronnie tętniących pian poliuretanowych o gęstości 53 i 62 kg/m3, mierzonych w kierunku podłużnym i prostopadłym do kierunku wzrostu piany w procesie jej otrzymywania. Stwierdzono wyraźną anizotropię własności mechanicznych piany. Obserwowano znacznie silniejsze zniszczenie zmęczeniowe...
-
Enhancement of PUR/PIR foam thermal stability after addition of Zostera marina biomass component investigated via thermal analysis and isoconversional kinetics
PublicationIn the present work, a thorough thermogravimetric (TG) analysis of bio-based polyurethane–polyisocyanurate (PUR–PIR) foams in both nitrogen and oxygen atmosphere is performed. A sustainable element of the foam is a biopolyol obtained via acid-catalyzed liquefaction of Zostera marina and Enteromorpha Algae biomass. Based on isoconversional analysis and apparent activation energies, several conclusions are obtained. In contradiction...
-
BDNF and Cortisol integrative system – Plasticity vs. degeneration: Implications of the Val66Met polymorphism
Publication -
Journal of the Japan Society for Technology of Plasticity
Journals -
Enhanced Degradation of Ethylene in ThermoPhotocatalytic Process Using TiO2/Nickel Foam: Reaction Mechanism
Publication -
A magnetic stir bar sorbent of metal organic frameworks, carbon foam decorated zinc oxide and cryogel to enrich and extract parabens and bisphenols from food samples
PublicationA porous composite magnetic stir bar adsorbent was fabricated for the extraction and enrichment of parabens and bisphenols from selected beverage samples. The adsorbent comprised a metal organic framework, carbon foam decorated zinc oxide and magnetic nanoparticles embedded in polyvinyl alcohol cryogel. The porous composite stir bar adsorbent could adsorb parabens and bisphenols via hydrogen bonding, π-π and hydrophobic interactions....
-
Weakly non-local theories of damage and plasticity based on balance of dissipative material forces
PublicationWykazano, że założenie o siłach materialnych oraz odpowiadających im równaniach równowagi w połączeniu z klasycznymi prawami dynamiki w przestrzeni fizycznej, pozwoliło na sformułowanie teoretycznych podstaw w zakresie słabo-nielokalnych gradientowych modeli zniszczenia i plastyczności. Odpowiednie równania równowagi w przestrzeni fizycznej i materialnej oraz pierwsze i drugie prawo termodynamiki zapisano w postaci całkowej. Następnie...
-
Numerical simulations of localization of deformation in quasibrittle materials within non-local softening plasticity.
PublicationW artykule przedstawiono model sprężysto-plastyczny z nielokalnym osłabieniem do obliczeń lokalizacji odkształceń w materiałach kruchych. Analizę przeprowadzono dla jednoosiowego ściskania i rozciągania. Obliczenia wykonano dla różnych długości charakterystycznych.
-
3D mesoporous α-Co(OH)2 nanosheets electrodeposited on nickel foam: A new generation of macroscopic cobalt-based hybrid for peroxymonosulfate activation
PublicationCobalt-based catalysts with high stability and facile recovery for heterogeneous peroxymonosulfate (PMS) activation are still rather sparse and therefore highly desirable. Herein, 3D mesoporous α-Co(OH)2 nanosheets was created on robust nickel foam (NF) via facile electrodeposition approach at 6 mA/cm2 for only 400 s. Almost complete removal of phenol can be achieved within 7 min with a degradation rate of 0.39 min−1, 2 times higher...
-
The Superiority of TiO2 Supported on Nickel Foam over Ni-Doped TiO2 in the Photothermal Decomposition of Acetaldehyde
Publication -
FE analysis of strain localization in concrete in elasto-plasticity and damage mechanics with non-local softening
PublicationW artykule przedstawiono wyniki symulacji numerycznych zjawiska lokalizacji odkształceń w betonie wykonanaych przy zastosowaniu metody elementów skończonych (MES). Do opisu betonu wykorzystano dwa prawa materiałowe zdefiniowane w ramach teorii plastyczności (kryterium Druckera-Pragera w ściskaniu i warunek Rankine'a w rozciąganiu) oraz mechaniki uszkodzeń w sformułowaniu odkształceniowym. Dla poprawnego opisu lokalizacji (regularyzacji...
-
Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
Journals -
Nowe konstrukcje przekładkowe metal-pianka poliuretanowa = New sandwich plate systems metal - PU foam
PublicationWyznaczono statyczne własności mechaniczne przy ściskaniu, rozciąganiu oraz ścinaniu w óżnych kierunkach względem wzrostu piany oraz przy cyklicznych naprężeniach ściskających i ścinających. Stwierdzono różnice własności mechanicznych w zależności od kierunku i formy naprężeń.
-
Laboratory Examination of Frost-heaving Properties of Road Unbound Mixtures Based on Fines Content and Plasticity Index
Publication -
Effects of manufacturing and face /core bonding on impact damage in glass/polyester - PVC foam core sandwich panels
PublicationZbadano podatność na inicjację uszkodzeń pod wpływem spadającego obciążenia w konstrukcjach przekładkowych poliestrowo szklanych z rdzeniem z pianki PVC przy dwóch sposobach łączenia okładek z rdzeniem: przy pomocy 2 klejów proponowanych do tego celu przez ich producentów oraz czystej żywicy. Zastosowano oprzyrządowany młot spadowy , określając rozmiar zniszczeń na powierzchni próbki metodą wizualna i ultradźwiękową. Inicjacja...
-
Concrete beams under bending - calculations of size effects within stochastic elasto-plasticity with non-local softening
PublicationW artykule przedstawiono wyniki numerycznej analizy efektów skali (efektu deterministycznego i stochastycznego) w belkach betonowych nacięciem poddanych zginaniu z uwzględnieniem lokalizacji odkształceń. Obliczenia wykonano przy zastosowaniu metody elementów skończonych i sprężysto-plastycznego modelu z nielokalnym osłabieniem. Pokazano wpływ wielkości belek betonowych na nośność.
-
NEURAL PLASTICITY
Journals -
The river water influence on cationic and anionic dyes collection by nickel foam with carbonized metal-organic frameworks and carbon nanotubes
Publication