Search
displaying 1000 best results Help
Search results for: SIMULATION MODEL
-
SIMULATION MODEL OF ASON/GMPLS ARCHITECTURE
PublicationGrowing demands of information society concerned with sophisticated applications could be satisfied by ASON/GMPLS architecture comprehended as Automatically Switched Optical Network (ASON) with Generalized Multi-Protocol Label Switching (GMPLS). The ASON/GMPLS proposition represents the future direction of Next Generation Network (NGN) architecture. Therefore considerable work has to be done to examine this solution. In this aspect...
-
Simulation model for resource-constrained construction project
Publication -
Simulation model for evaluation of QOS dynamic routing
PublicationCurrent informational networks use a large variety of technologies to support data exchange. Most of them are focused on IP protocol and include mechanisms which by definition should supply demanded QoS. One of those mechanisms is efficient path calculation - routing. Traffic offered to the network can change very rapidly in short term. Routing should support such traffic changes and all the time calculate valid paths in terms...
-
Simulation model of IPMSM drive with rotor position estimator
PublicationThe paper presents a simulation model of electric drive consisting of: IPMSM motor, inverter and digital controller. The model was designed in Mathlab/Simulink. By modelling of the controller its discrete operation was taken into account in order to simulate precisely a specific sensorless control algorithm. A method for estimation of angular rotor position was proposed. Its mathematical algorithm was explained and errors were...
-
Simulation model of IMS/NGN call processing performance
PublicationIn current telecommunications it is assumed that demands of the information society for quickly delivered services will be satisfied by the Next Generation Network (NGN) architecture, which includes IP Multimedia Subsystem (IMS) elements. To guarantee Quality of Service (QoS), proper design and dimensioning of NGN is absolutely necessary, for which appropriate models have to be proposed. As the NGN architecture is very complicated,...
-
A Simulation Model for Risk and Pricing Competition in the Retail Lending Market
PublicationWe propose a simulation model of the retail lending market with two types of agents: borrowers searching for low interest rates and lenders competing through risk-based pricing. We show that individual banks observe adverse selection, even if every lender applies the same pricing strategy and a credit scoring model of comparable discrimination power. Additionally, the model justifies the reverse-S shape of the response rate curve....
-
Simulation Model of IMS/NGN with Transport Stratum Based on MPLS Technology
PublicationIn the paper we continue our research on traffic modelling in the Next Generation Network (NGN) architecture, which includes the IP Multimedia Subsystem (IMS) elements. A simulation model of a single NGN domain with transport stratum based on the Multiprotocol Label Switching (MPLS) technology is proposed, which allows evaluation of mean response time of this stratum. The simulation model is applied to verify the results obtained...
-
Simulation model for assessment of IMS-based NGN call processing performance
PublicationIn current telecommunications it is assumed that demands of information society for quickly delivered services will be satisfied by Next Generation Network (NGN) architecture, which includes IP Multimedia Subsystem (IMS) elements. To guarantee Quality of Service (QoS), proper design and dimensioning of NGN is absolutely necessary, for which appropriate models have to be proposed. As NGN architecture is very complicated, the most...
-
Simulation model for evaluation of QoS routing algorithm in large packet networks
PublicationThe variety of traffic transferred via current telecommunication networks includes also voice, which should meet quality requirements. One of mechanisms, which can support QoS in current packet networks, is routing. There exist many routing proposals which should introduce the QoS into the network but practically they don't. Following paper presents the realization of simulation model for evaluation of a new routing algorithm DUMBRA...
-
An application of simulation model of fuel consumption in diagnostic system of wheeled tractors
PublicationAn application of computer controlled fuel injection systems in vehicle engines and growing demands concerning toxic substances emission and fuel consumption was a main reason for OBD (On Board Diagnosis) development. In spite of a great technological development, only some tractors are equipped in diagnostic systems. On board diagnostic is strongly connected with emission demands and does not concern other important vehicle functions. In...
-
Multi-objective optimization of expensive electromagnetic simulation models
PublicationVast majority of practical engineering design problems require simultaneous handling of several criteria. For the sake of simplicity and through a priori preference articulation one can turn many design tasks into single-objective problems that can be handled using conventional numerical optimization routines. However, in some situations, acquiring comprehensive knowledge about the system at hand, in particular, about possible...
-
Verification of the Analytical Traffic Model of a Multidomain IMS/NGN Using the Simulation Model
PublicationIn this paper we verify the previously proposed analytical traffic model of a multidomain Next Generation Network (NGN), which is standardized for delivering multimedia services based on the IP Multimedia Subsystem (IMS). For this reason a proper simulation model used, in which not theoretical queuing system models but the operation of real network elements and standardized call scenarios are accurately implemented. Consequently,...
-
Simulation model for evaluation of packet sequence changed order of stream in DiffServ network
PublicationCurrent packet networks use a large variety of mechanisms which should support QoS (Quality of Service). One of those mechanisms is routing (calculating connection paths for incoming service requests). The most effective mechanism in QoS context is dynamic routing, which is based on the current network state described by the offered traffic matrix and link states. After switching between calculated available paths, connection...
-
A Simulation Model of Construction Projects Executed in Random Conditions with the Overlapping Construction Works
Publication -
The use of a simulation model to analyze the impact of heavy transport generated by the port to the city traffic.
Publication -
Simulation modelling for managing complex systems: case study for maintenance services.
PublicationModelowanie symulacyjne zyskuje sobie pozycje najważniejszego narzędzia w obszarze zarządzania wiedzą i informacją. W pracy przedstawiono zastosowanie modelowania symulacyjnego w zarządzaniu przepływem informacji w systemach złożonych. Posłużono się przykładem serwisu eksploatacji i przeglądów remontowych dla pięciu geograficznie rozproszonych przedsiębiorstw.
-
Development of a simulation model of the activities of a transport and forwarding enterprise in the organization of international road cargo transportation
PublicationThe object of this study is the process of planning the work of a transport and forwarding company when serving different categories of customers who need organizational support for the delivery of goods by road transport in international traffic. The solved problem is due to the need to devise recommendations for organizing the work of forwarders when interacting with customers of transport and forwarding services that export...
-
Early stage of critical clusters growth in phenomenological and Molecular Dynamic simulation models.
PublicationOpisano proces kondensacji pary wodnej w ujĘciu fenomenologicznymi dynamiczno-molekularnym. Wczesne fazy wzrostu klastra opisano w ramach klasycznej teorii Hertza-Knudsena. Obszernie przedstawiono wyniki symulacji dynamiczno-molekularnych zjawiska kondensacji pary wodnej z jednorodnej fazy gazowej (przebieg powstawania małych klastrów H2O i szybkość wzrostu klastrów ponadkrytycznych).
-
Implementation of didactic simulation models in Open Source and SCORM compliant LMS systems.
PublicationModele symulacyjne są cenną pomocą w procesie dydaktycznym. Ich zastosowanie w systemach komputerowego wspomagania nauczania znacząco podnosi ich efektywność oraz pozwala na przeprowadzanie wirtualnych ćwiczeń laboratoryjnych (na przykład podczas nauczania na odległość). Niestety stosowane obecnie systemy LMS (Lerning Management System) nie są zadowalająco przystosowane do obsługi symulacyjnej zawartości dydaktycznej. W artykule...
-
Early stage of critical clusters growth in phenomenological and Molecular Dynamic simulation models
PublicationW artykule opisano wzrost klastrów krytycznych w ramach klasycznego podejścia fenomenologicznego oraz dynamiczno-molekularnego (MD). Została wyprowadzona nowa formuła opisujaca liczbę klastrów krytycznych. Sformułowano równania opisujace wczesne etapy wzrostu kropli o rozmiarach krytycznych. Opisano wyniki symulacji dynamiczno-molekularnych powstawania klastrów w jednorodnej parze przesyconej oraz podano czasowe zmiany rozkładu...
-
Microscopic traffic simulation models for connected and automated vehicles (CAVs) – state-of-the-art
PublicationResearch on connected and automated vehicles (CAVs) has been gaining substantial momentum in recent years. However, thevast amount of literature sources results in a wide range of applied tools and datasets, assumed methodology to investigate thepotential impacts of future CAVs traffic, and, consequently, differences in the obtained findings. This limits the scope of theircomparability and applicability and calls for a proper standardization...
-
Quality increase for single-welded joints of thin-walled structures by means of simulation modelling
PublicationThe Simulation calculation module and the SolidWorks software package have helped to define the optimal shape and dimensions of single-welded joints which may serve the basis for calculating the process parameters of welding. Having compared the models with different weld cross-sections the authors have defined that the weld height and width do not significantly affect the stress concentration, and the stress concentration and...
-
Cost-Efficient EM-Driven Size Reduction of Antenna Structures by Multi-Fidelity Simulation Models
PublicationDesign of antenna systems for emerging application areas such as the Internet of Things (IoT), fifth generation wireless communications (5G), or remote sensing, is a challenging endeavor. In addition to meeting stringent performance specifications concerning electrical and field properties, the structure has to maintain small physical dimensions. The latter normally requires searching for trade-off solutions because miniaturization...
-
Construction and Validation of Simulation Models of Samples Made from 316L Steel by Applying Additive Technique
Publication -
Construction of a simulation model of goods delivery in international road transportation taking into account the functioning efficiency of logistics supply chain
PublicationThe object of this study is the process of goods delivery in international road transport using various types of logistics chains. The problem being solved is due to the need to develop recommendations for exporters of goods to reformat or design new supply chains during wartime. The expediency of organizing foreign trade operations by the cargo owners' own forces or with the involvement of enterprises providing logistics consulting...
-
Low-Cost Quasi-Global Optimization of Expensive Electromagnetic Simulation Models by Inverse Surrogates and Response Features
PublicationConceptual design of contemporary high-frequency structures is typically followed by a careful tuning of their parameters, predominantly the geometry ones. The process aims at improving the relevant performance figures, and may be quite expensive. The reason is that conventional design methods, e.g., based on analytical or equivalent network models, often only yield rough initial designs. This is especially the case for miniaturized...
-
Scalability of surrogate-assisted multi-objective optimization of antenna structures exploiting variable-fidelity electromagnetic simulation models
PublicationMulti-objective optimization of antenna structures is a challenging task due to high-computational cost of evaluating the design objectives as well as large number of adjustable parameters. Design speedup can be achieved by means of surrogate-based optimization techniques. In particular, a combination of variable-fidelity electromagnetic (EM) simulations, design space reduction techniques, response surface approximation (RSA) models,...
-
Rapid multi-objective optimization of antennas using nested kriging surrogates and single-fidelity EM simulation models
PublicationEver increasing performance requirements make the design of contemporary antenna systems a complex and multi-stage process. One of the challenges, pertinent to the emerging application areas but also some of the recent trends (miniaturization, demands for multi-functionality, etc.), is the necessity of handling several performance figures such as impedance matching, gain, or axial ratio, often over multiple frequency bands. The...
-
Recent advances in rapid multiobjective optimization of expensive simulation models in microwave and antenna engineering by Pareto front exploration
PublicationPractical engineering design problems are inherently multiobjective, that is, require simultaneous control of several (and often conflicting) criteria. In many situations, genuine multiobjective optimization is required to acquire comprehensive information about the system of interest. The most popular solution techniques are populationbased metaheuristics, however, they are not practical for handling expensive electromagnetic...
-
Variable-Fidelity Simulation Models and Sparse Gradient Updates for Cost-Efficient Optimization of Compact Antenna Input Characteristics
PublicationDesign of antennas for the Internet of Things (IoT) applications requires taking into account several performance figures, both electrical (e.g., impedance matching) and field (gain, radiation pattern), but also physical constraints, primarily concerning size limitation. Fulfillment of stringent specifications necessitates the development of topologically complex structures described by a large number of geometry parameters that...
-
Efficient Surrogate Modeling and Design Optimization of Compact Integrated On-Chip Inductors Based on Multi-Fidelity EM Simulation Models
PublicationHigh-performance and small-size on-chip inductors play a critical role in contemporary radio-frequency integrated circuits. This work presents a reliable surrogate modeling technique combining low-fidelity EM simulation models, response surface approximations based on kriging interpolation, and space mapping technology. The reported method is useful for the development of broadband and highly accurate data-driven models of integrated...
-
SIMULATION MODELLING PRACTICE AND THEORY
Journals -
International Journal of Simulation Modelling
Journals -
Three-dimensional conceptual model for service-oriented simulation
Publicationn this letter, we propose a novel three-dimensional conceptual model for an emerging service-oriented simulation paradigm. The model can be used as a guideline or an analytic means to find the potential and possible future directions of the current simulation frameworks. In particular, the model inspects the crossover between the disciplines of modeling and simulation, service-orientation, and software/systems engineering. Finally,...
-
Model and laboratory simulation of a induction motor for diagnostic purposes
PublicationStatistics say that bearings are this part of induction motors which is most susceptible to damage. The equipment employed for bearing diagnostics usually makes use of vibrations as the criterion for technical condition of the bearings. A faulty bearing results in additional motor vibrations. They are reflected in the harmonic content of stator currents. In certain operating conditions the current signal is the sole source of information...
-
Mechanical model of fascia-implant structure. Finite element simulation.
PublicationPraca dotyczy modelowania i symulacji syntetycznych implantów chirurgicznych stosowanych w leczeniu przepulin brzusznych metodą laparoskowpową. Prponowane są modele matematyczne a ich prawidłowość weryfikowana jest na podstawie badań doświadczalnych zachowania się modeli fizycznych wszczepionych implantów pod wpływem obciążeń wynikających z fizjologii człowieka. Nakreślona jest metodologia oceny trwałości połączenia siatki chirurgicznej...
-
Model-based testing for execution algorithms in the simulation of cyber-physical systems
PublicationThe understanding of simulation semantics of a hybrid system is a challenge for computational engineers as it requires expertise in computer science, engineering, numerical methods, and mathematics at once. The testing methods for the execution of a simulation are being researched but not yet applied on the industrial level. Consequently, the semantics of the simulation becomes a critical artifact in the system development process....
-
Low-fidelity model considerations for simulation-based optimisation of miniaturised wideband antennas
PublicationHere, variable-fidelity electromagnetic (EM)-based design optimisation of miniaturised antennas is discussed. The authors focus on an appropriate selection of discretisation density of the low-fidelity EM model, which results in good performance of the optimisation algorithm in terms of its computational complexity and reliability. Trust-region gradient search with low-fidelity model corrected by means of non-linear frequency scaling...
-
Model and simulation tests of a squirrel-cage induction motor with oscillation of air gap
PublicationPrzedstawiono model matematyczny silnika, który pozwala na wprowadzanie ekscentryczności wirnika. Zaprezentowano obliczone widma prądu z wprowadzoną oscylacją wirnika, co z pewnym przybliżeniem odpowiada uszkodzeniu łożyska. Rezultaty symulacji pozwalają na określenie zależności pomiędzy oscylacją szczeliny powietrznej i składowych w widmie prądu.
-
Energetic model of hydraulic system of refuse collection vehicle based on simulation and experimental data
PublicationThis paper presents an energetic model of hydraulic system of a refuse collection vehicle. First, benefits resulting from implementation of an energetic model in the industry and operation of a Refuse Collection Vehicle are briefly explained. Then, components of the energy consumption in hydraulic circuits of compactor and lifting device are described and combined into a comprehensive model that can be evaluated using basic measurement...
-
A biochemical multi-species quality model of a drinking water distribution system for simulation and design
PublicationDrinking Water Distribution Systems (DWDSs) play a key role in sustainable development of modern society. They are classified as critical infrastructure systems. This imposes a large set of highly demanding requirements on the DWDS operation and requires dedicated algorithms for on-line monitoring and control to tackle related problems. Requirements on DWDS availability restrict the usability of the real plant in the design phase....
-
Simulation of fracture process in concrete elements with steel fibres using discrete lattice model
PublicationArtykuł omawia wyniki modelowania procesu zarysowania w elementach betonowych zawierające stalowe włókna przy zastosowaniu dyskretnego modelu kratownicowego. Beton był modelowany na poziomie mezoskali z uwzględnieniem 5 faz: kruszywa, zaczynu cementowego, włókien i obu stref kontaktu. Obliczenia wykonano dla jednoosiowego ściskania, jednoosiowego rozciągania i zginania prostego.
-
Simulation of the Remanence Influence on the Transient States of the Single-Phase Transformer Including Feedback Preisach Model
PublicationThis paper presents the results of the experimental and simulation investigation concerning the influence of remanence in the core of a single-phase transformer at the no-load transient state. Experimental studies consisted of the discharge of the capacitor through the primary winding at several different values of the residual magnetic flux. The paper presents a model of the transformer test system, taking into account the magnetic...
-
Computational model for simulation of lifeboat motions during its launching from ship in rough seas
PublicationW artykule przedstawiono model obliczeniowy 3 D, opisujący ruch obiektu w 6 stopniach swobody (6DoF), do symulacji ruchu jedno- lub dwuzawiesiowej łodzi ratunkowej lub ratowniczej podczas opuszczania ze statku na wzburzonej wodzie. Jest to złożony model uwzględniający warunki morskie oraz elastyczność i własności tłumiące elementów i mechanizmów żurawika, liny oraz kadłuba łodzi. Ponadto przedstawiono przykładowe wyniki obliczeń...
-
Two-dimensional diffusion wave model for numerical simulation of inundation - Upper Narew case study
PublicationPrzedstawiono zastosowanie uproszczonego modelu matematycznego przepływu wody ze swobodną powierzchnią, zwanego falą dyfuzyjną, do numerycznej symulacji zalewu powodziowego doliny rzeki. Równania modelu rozwiązano metodą objętości skończonych. Model w dwuwymiarowej wersji wykorzystano do odtworzenia przejścia fali powodziowej przez fragment doliny Górnej Narwi między miejscowościami Suraż i Łapy.
-
Component Based Flight Simulation in DIS Systems.Komponentowy model symulacji obiektów latających w systemach DIS.
PublicationInteraktywna symulacja rozproszona stanowi interesującą klasę systemów informacyjnych łączących kilka dziedzin informatyki pozwalających każdemu obiektowi na indywidualne symulowanie dla wizualizacji dynamicznego stanu wszystkich uczestniczących w symulacji obiektów rozproszonych. Obiekty są nieprzewidywalne, z tego powodu istnieje konieczność ciągłej wymiany informacji o ich stanie na potrzeby poprawnej wizualizacji 3D sceny z...
-
Verification of geotechnical numerical simulations by model tests using PIV technique. Part II Numerical Simulation
PublicationPrzedstawiono zakres i wyniki symulacji numerycznych stateczności fundamentów bezpośrednich posadowionych w sąsiedztwie kątowych ścian oporowych. Wyniki symulacji numerycznych zweryfikowano na podstawie wyników badań modelowych z uwzględnieniem techniki PIV przedstawionych w części I niniejszego artykułu. W obliczeniach numerycznych wykorzystano trzy kryteria wytrzymałości gruntu na ścinanie: Coulomba - Mohra, Matsuoki - Nokaiego...
-
Model Management for Low-Computational-Budget Simulation-Based Optimization of Antenna Structures Using Nature-Inspired Algorithms
PublicationThe primary objective of this study is investigation of the possibilities of accelerating nature-inspired optimization of antenna structures using multi-fidelity EM simulation models. The primary methodology developed to achieve acceleration is a model management scheme which the level of EM simulation fidelity using two criteria: the convergence status of the optimization algorithm, and relative quality of the individual designs...
-
Comparison of two model concepts for simulation of nitrogen removal at a full-scale biological nutrient removal pilot plant
PublicationCelem badań było porównanie zdolności predykcyjnych dwóch mechanistycznych modeli procesu osadu czynnego (ASM1 i ASM3). W tym celu wykorzystano bazę danych empirycznych z pilotowej oczyszczalni ścieków Gummerwald w Hanowerze (Niemcy). Oba badane modele prognozowały szczytowe stężenia azotu amonowego na poziomie >8 gN/m3 w ciągu, którego obciążenie hydrauliczne wzrastało czterokrotnie w porównaniu do okresu bezdeszczowego. Prognozowany...
-
An Attempt to Develop a Model Selection Algorithm of Computer Simulation during the Design Process of Mechanical Response of Any Mechanical Body
PublicationIn the literature, there are algorithms associated with the design of simulations of technological processes, in which the material model has always been defined previously. However, in none of the studies of computer simulation modelling of technological processes known to the authors of this article, is there a detailed description of how the algorithm, or the selection of plastic model used, is subject to this process. This...