Search
Filters
total: 778
filtered: 546
Search results for: COPD
-
Perforated alumina templates as a tool for engineering of CoPd film magnetic properties
Publication -
BINDER COURSES USING COLD RECYCLED MIXTURES – A NOVEL CONCEPT IN COLD RECYCLING
PublicationCold recycling with cement and bituminous emulsion is one of the most environmentally friendly techniques to maximize the reuse of reclaimed asphalt (RA) collected during demolition of roads. Cold recycled mixtures are commonly used for base courses in construction or rehabilitation of flexible and semi-rigid pavements. Current experiences demonstrated that cold recycling with appropriate requirements and technical recommendations...
-
Application of the Electronic Nose Technique to Differentiation between Model Mixtures with COPD Markers
PublicationABSTRACT The paper presents the potential of an electronic nose technique in the field of fast diagnostics of patients suspected of Chronic Obstructive Pulmonary Disease (COPD). The investigations were performed using a simple electronic nose prototype equipped with a set of six semiconductor sensors manufactured by FIGARO Co. They were aimed at verification of a possibility of differentiation between model reference mixtures with...
-
Nanofiber mat spinal cord dressing-released glutamate impairs blood-spinal cord barrier
Publication -
CEACAM6 as a Novel Therapeutic Target to Boost HO-1—mediated Antioxidant Defense in COPD
Publication -
The Complexity of Zero-Visibility Cops and Robber
PublicationIn this work we deal with the computational complexity aspects of the zero-visibility Cops and Robber game. We provide an algorithm that computes the zero-visibility copnumber of a tree in linear time and show that the corresponding decision problem is NP-complete even for the class of starlike graphs.
-
The complexity of zero-visibility cops and robber
PublicationWe consider the zero-visibility cops & robber game restricted to trees. We produce a characterisation of trees of copnumber k and We consider the computational complexity of the zero-visibility Cops and Robber game. We present a heavily modified version of an already-existing algorithm that computes the zero-visibility copnumber of a tree in linear time and we show that the corresponding decision problem is NP-complete on a nontrivial...
-
Polish experience with cold in-place recycling
PublicationDeep cold in-place recycling using cement and asphalt emulsion has been used for reconstruction of existing roads since the beginning of the 1990s. This paper describes the first Polish requirements for mineral-cement-emulsion mixtures. As requirements stated for the strength of the mineral-cement-emulsion mixtures were quite high, most of the mixtures were designed using high amount of cement and aggregate added for the improvement...
-
Workplace Survey of Cold Protective Glove Aging
Publication -
Fidelity thresholds in single copy entanglement distillation
PublicationRozważono różne aspekty destylacji zaszumionego splątania oraz pewne stowarzyszone efekty w kwantowej korekcji błędów. W szczególności pokazano, że w przypadku gdy dozwolona jest komunikacja klasyczna w jedną stronę oraz współdzielony stan kwantowy dxd nie jest czysty, to istnieje próg dla optymalnego ułamka F stanu, który może być otrzymany w procesie destylacji na jednej kopii. Wynika z tego, że aby otrzymać (probabilistycznie)...
-
Zero-visibility cops and robber and the pathwidth of a graph
PublicationWe examine the zero-visibility cops and robber graph searching model, which differs from the classical cops and robber game in one way: the robber is invisible. We show that this model is not monotonic. We show that the zero-visibility copnumber of a graph is bounded above by its pathwidth and cannot be bounded below by any nontrivial function of the pathwidth. As well, we define a monotonic version of this game and show that the...
-
DEFORMATIONS OF INNOVATIVE COLD-FORMED GEB SECTIONS
PublicationPermanent urban growth of the world of today world implies demanding challenges for the steel construction industry. Nowadays, one of the most important issues is the cost optimization of steel structures. Since the weight of building materials is a major component of the total cost, engineers and designers try to reduce structural weight, without compromising durability and sustainability of a steel structure. Therefore, light...
-
Stability of an Innovative Cold-Formed GEB Section
PublicationThis paper is focused on the numerical analysis and experimental test of stability of the cold-formed profile with an innovative GEB cross-section. For the shell model of the axially compressed member, the linear buckling analysis and the nonlinear static analysis were carried out. In the numerical research, the buckling load and the limit load for variable section heights were obtained. Some of the results were compared with the...
-
Buckling Analysis of Cold Formed Silo Column
PublicationThe paper is devoted to stability analysis of different models of steel cold formed silo column. The steel cylindrical silos are often composed of corrugated walls and vertical open-sectional columns uniformly placed along the silo circumference. Both the whole 3D silo, a simplified model consisting of one column with a part of the silo walls, and a single column resting on elastic foundation provided by the silo walls were analyzed....
-
Buckling analysis of cold formed steel column
PublicationW pracy przedstawiono analizę słupa zimnogiętego o przekroju otwartym. Przeprowadzono analizy statyczne liniowe i nieliniowe. Analizowano wpływ podłoża sprężystego oraz sztywność połączenia dwóch sąsiednich słupów.
-
On local buckling of cold-formed channel members
PublicationThe paper deals with local buckling of the compressed flanges of cold-formed thin-walled channel beams subjected to pure bending or axially compressed columns. Arbitrarily shaped flanges of open cross-sections and the web-flange interactions are taken into account. Buckling deformation of a beam flange is described by displacement related to torsion of the flange about the line of its connection with the web. Total potential energy...
-
Zero-Visibility Cops and Robber Game on a Graph
PublicationWe examine the zero-visibility cops and robber graph searching model, which differs from the classical cops & robber game in one way: the robber is invisible. We show that this model is not monotonic. We also provide bounds on both the zero-visibility copnumber and monotonic zero-visibility copnumber in terms of the pathwidth.
-
Cold-adapted bacterial lipolytic enzymes and their applications
PublicationLipolytic enzymes, esterases and lipases catalyze the hydrolysis and transesterification of fatty acid esters. This class of enzymes is the most important group of biocatalysts for biotechnological applications. From this perspective, coldactive lipolytic enzymes from cold adapted bacteria display attractive properties for some industrial purposes, including high catalytic activity at low temperatures and low thermostability. To...
-
Gene copy numbers of HER family in breast cancer
Publication -
The analysis of selected microelements in neonatal umbilical cord blood
Publication -
The effect of exposure to cold on dexterity and temperature of the skin and hands
Publication -
The Effect of Cold Plasma on Selected Parameters of Bovine Colostrum
Publication -
Environmentally-Safe Cold Recycling of Asphalt Pavements in Poland
PublicationArtykuł przedstawia metodę recyklingu na zimno z zastosowaniem jednoczesnego dodatku cementu portlandzkiego i emulsji asfaltowej. Metoda przydatna do rehabilitacji zniszczonych nawierzchni drogowych. Warstwy po recyklingu charakteryzują się sztywnością i podatnością. Przedstawiono wyniki badań laboratoryjnych i terenowych.
-
Innovative Cold-formed GEB Section under Bending
PublicationThis paper is concerned with the numerical bending capacity study of the innovative cold-formed GEB sections. Both linear buckling analysis and non-linear static analysis incorporating geometric and material nonlinearity were carried out employing a shell structural model. The magnitudes of buckling load and limit load with respect to GEB section depth and thickness were obtained. The opened cold-formed section was tested assuming...
-
Cops, a fast robber and defensive domination on interval graphs
PublicationThe game of Cops and ∞-fast Robber is played by two players, one controlling c cops, the other one robber. The players alternate in turns: all the cops move at once to distance at most one each, the robber moves along any cop-free path. Cops win by sharing a vertex with the robber, the robber by avoiding capture indefinitely. The game was proposed with bounded robber speed by Fomin et al. in “Pursuing a fast robber on a graph”,...
-
COLD CRACKING OF S460N STEEL WELDED IN WATER ENVIRONMENT
PublicationThis paper shows results of weldability testing of fine-grained high -strength low- alloy S460N steel welded in water environment by covered electrodes. The tests were carried out by using the CTS test specimens with fillet welds. Four specimens were welded under water and one specimen in air. Welded joints were subjected to non-destructive visual and penetration tests. The accepted joints were then subjected to macroscopic and...
-
Innovative cold-formed GEB section under compression
PublicationCold-formed steel sections extensively affect the modern steel construction industry. Not only are they used as secondary elements like purlins or sheeting, but also they can serve as primary load-bearing members in fabricated steel panels and trusses. A new cross-section called shortly a GEB may serve as that member. However, its existence of the metal building structures industry depends on the exact, optimal dimensional parameters...
-
Resistance to cold cracking of steel joints of P460NL1 steel
PublicationPrzedstawiono wyniki badań odporności na zimne pękanie złączy spawanych ze stali przeznaczonej do pracy pod ciśnieniem. Badano równoczesny wpływ zawartości wodoru dyfundującego i energii liniowej na naprężenie krytyczne w próbie implant dla złączy spawanych elektrodami otulonymi i drutem proszkowym w osłonie gazów ochronnych. Stwierdzono wpływ energii liniowej jak i zawartości wodoru dyfundującego na odporność na zimne pękanie...
-
CLASSIFICATION OF RESTRAINTS IN THE OPTIMIZATION PROBLEM OF A COLD-FORMED PROFILE
PublicationThis work describes the restraints in the optimization problem. This is an important and complicated issue because it requires taking into account a vast range of information related to the design and production. In order to describe the relations of a specific optimization problem, it is essential to adopt appropriate criteria and to collect information on all kinds of restraints, i.e. boundary conditions. The following paper...
-
Occurrence of anisakid nematodes in Atlantic cod (Gadus morhua) and Greenland cod (Gadus ogac), West Greenland
Publication -
Cold Start Emissions Investigation at Different Ambient Temperature Conditions
Publication -
Biological Effects of Cold Atmospheric Pressure Plasma on Skin Cancer
Publication -
Shotgun Lipidomic Analysis for Differentiation of Niche Cold Pressed Oils
Publication -
Internal friction in pure Co and CoPt alloy during ordering
PublicationZbadano tarcie wewnętrzne, wskaźnik modułu sprężystości postaciowej i podatność magnetyczną stopu CoPt (50% at. Pt) w stanie nieuporządkowanym, uzyskanym w wyniku oziębienia, podczas wyżarzania do 850 K przy wzrostach temperatury 6K/min. i 2K/min., stosując odwróconą skręcarkę wahadłową. Zaobserwowano maksimum tarcia wewnętrznego w CoPt przy 700 K oraz w monokrysztale kobaltu w 720 K w pobliżu martenzytycznej przemiany fazowej,...
-
Modeling of truss with cold-formed section and positive eccentricity in the node
PublicationThis work is dedicated to establishing the load carrying capacity of tensed and compressed truss’ nodes made of cold-formed open cross sections. The occurrence of bending in the truss’ nodes is the result of a specific production technology for system lattice girders assumed by the designer and the producer. The aim of this research is to present the methodology of conduct for creation of computational models that best depict the...
-
Numerical simulation of cold flow and combustion in a swirl stabilized combustor
PublicationA numerical simulation model was developed to investigate the cold flow and combustion using Ansys FLUENT 2021R1. The governing equations were solved using the pressure-based method, and pressure–velocity coupling was performed using the SIMPLE method. To model the turbulent process, the RSM model was used. Non-premixed model is chosen to solve the chemical kinetics between fuel and oxigen. Radiation heat transfer was calculated...
-
Effect of strain level on the stiffness of cold recycled bituminous mixtures
PublicationCold recycling is a sustainable technology for the rehabilitation of bitumi-nous pavements. This study investigates the stiffness response of cement-bitumen treated materials (CBTM)manufactured with 80% reclaimed asphalt and treated with 2.0% Portland cement and 4.0% bitumen emulsion. Indirect tensile stiffness modulus tests were carried out to assess the strain dependence of stiffness at target horizontal deformation levels between...
-
Fatigue Bending of V-Notched Cold-Sprayed FeCoCrNiMn Coatings
PublicationCold-spray coatings were produced by FeCoCrNiMn high-entropy alloy powders deposited on carbon steel substrate. The coatings were realized at intermediate temperature and high pressure (at 1100 °C and 7 MPa). The coating microstructure was characterized by scanning electron microscopy and X-ray diffraction, revealing a very dense deposition and high flattening ratio of the splatted particles. This had a large influence on the...
-
RDE Testing of Passenger Cars: The Effect of the Cold Start on the Emissions Results
Publication -
Weather-Dependent Variation in the Cold-Season Diet of Urban KestrelsFalco tinnunculus
Publication -
Effect of welding conditions on susceptibility to cold cracking of underwater welded joints
PublicationPrzedstawiono wybrane aspekty spawalności stali przy spawaniu pod wodą metodą lokalnej komory suchej. Zwrócono szczególną uwagę na skłonność do tworzenia peknięć zimnych w SWC. Przy pomocy planowania doświadczeń określono ilościowy wpływ parametrów spawania na naprężenia krytyczne z próby implant.
-
A cold-adapted esterase from psychrotrophic Pseudoalteromonas sp. strain 643A
PublicationDzięki zastosowaniu lipaz możliwa jest biotechnologiczna produkcja m.in. biodegradowalnych biopolimerów, biopaliw (tzw. biodiesel), wielu terapeutyków, herbicydów, pestycydów, kosmetyków, substancji smakowych, serów i in. Szczególnie interesującą grupę stanowią enzymy lipolityczne, pochodzące z organizmów psychrofilnych i psychrotrofowych, ze względu na zdolność do wydajnego katalizowania reakcji w temperaturach rzędu 10-20 ºC....
-
Seed-Roasting Process Affects Oxidative Stability of Cold-Pressed Oils
Publication -
Effects of local anesthetics on the respiratory burst of cord blood neutrophils in vitro
Publication -
The Impact of Protective Gloves on Manual Dexterity in Cold Environments—A Pilot Study
Publication -
Artificial Superhydrophobic and Antifungal Surface on Goose Down by Cold Plasma Treatment
Publication -
The influence of cold season warming on the mercury pool in coastal benthic organisms
Publication -
Note on the Harmonic Approximation in the Treatment of Entanglement: N Cold Trapped Ions
Publication -
Cold sintering of colloidal silica particles using different alkali solutions
Publication -
Stability and limit load analysis of a cold-formed channel section column
PublicationThe paper presents stability and limit load analysis of a steel column 1440 mm high of a cold-formed channel section, subjected to a combination of compression and bending. Experimental results were compared to the resistance of a code procedure and to the outcome of numerical non-linear analysis. Comparison was made of numerical solutions by means of static (Riks) and dynamic (Explicit and Implicit) methods. Perfectly elastic...