Filters
total: 170
Search results for: ELASTOMER
-
Technology of an adhesive silicone film as drug carrier in transdermal therapy I. Analytical methods used for characterization and design of the universal elastomer layers
PublicationSilicone polymers possess unique properties, which make them suitable for many different applications, for example in the pharmaceutical and medical industry. To create an adhesive silicone film, the appropriate silicone components have to be chosen first. From these components two layers were made: an adhesive elastomer applied on the skin, and a non-adhesive elastomer on the other side of the film. The aim of this study was...
-
Nonlinear Viscoelastic Properties of Polyurethane Nanocomposites
PublicationIn recent years, the nonlinear viscoelastic behaviors of elastomeric nanocomposites have been examined, especially for a wide range of rubbery composite (including natural rubber) materials. This chapter describes the influence of fillers and nanofillers on the nonlinear viscoelastic properties of elastomeric polyurethane systems. These filled elastomers (similar to the classic natural rubber reinforced elastomers), also exhibit...
-
Influence of e-beam irradiation on the chemical and crystal structure of poly(aliphatic/aromatic-ester) multiblock thermoplastic elastomers
Publication -
Influence of e-Beam Irradiation on the Physicochemical Properties of Poly(polyol Succinate-co-Butylene Succinate) Ester Elastomers
Publication -
Effect of bio-based components on the chemical structure, thermal stability and mechanical properties of green thermoplastic polyurethane elastomers
PublicationIt seems to be obvious that conditions changes during polyols synthesis have impact on the polyols properties. Even the chemical formula is the same or similar, physicochemical properties and also molecular weight of polyols might be different and are significant in term of future polyurethanes properties and processing. In this work, fully bio-based poly(propylene succinate)s synthesized at different temperature conditions were...
-
Wpływ keramzytu na budowę i stabilność termiczną elastomerów z kauczuku naturalnego
PublicationOpracowano elastomery o podwyższonej odporności termicznej z mieszanki gumowej zawierającej kauczuk naturalny napełnionej keramzytem przy zastosowaniu wybranych zmiękczaczy, a następnie zbadano ich budowę i odporność termiczną. Mieszanki gumowe wulkanizowano w prasie ciśnieniowej zgodnie z przyjętymi parametrami wulkanizacji. Strukturę elastomerów zbadano metodą FTIR-ATR, a stabilność termiczną określono metodą TG-FTIR.
-
Badania termiczne elastomerów poliuretanowych wytworzonych z prepolimerów zsyntetyzowanych z udziałem glikolizatów
PublicationZaprezentowano sposób otrzymywania elastomerów poliuretanowych metodą dwuetapową z prepolimerów zsyntetyzowanych z handlowego diizocyjanianu (MDI) i glikolizatu wytworzonego z poprodukcyjnych odpadów poliuretanowych. W drugim etapie prepolimer poddawano reakcji z mieszaniną glikolu BDO i oligoestrolu (Poles 55/20).Uzyskano materiały o właściwościach elastoplastycznych. Odporność na temperaturę wyznaczono z termogramów TG/DTG,...
-
Badanie wpływu ilości katalizatora i czasu wygrzewania na właściwości elastomerów uretanowych.
PublicationW artykule opisano syntezę lanych elastomerów uretanowych metodą dwuetapową, w której jako przedłużacz zastosowano roztwór katalizatora DABCO w glikolu butylenowym (0,2%, 0,3% i 0,4%). Przedstawiono wyniki pomiarów wybranych właściwości poliuretanów o różnej budowie, poddanych wygrzewaniu w krótkich czasach w temperaturze 110 st.C. Stwierdzono, że wydłużenie czasu wygrzewania w przyjętym zakresie wartości wpływa korzystnie na...
-
The influence of chemical composition of amide block on the thermal properties and structure of terpoly(ester-b-ether-b-amide) elastomers
PublicationMultiblock terpolymers-(PBT-b-PTMO-b-PA12,10)(n)- constituting the polymer systems, in which one of the three blocks (PBT) does not dissolve in PA12,10 block (hard phase) and, depending on its molecular weight is slightly soluble in PTMO block (soft phase), have been obtained. The DSC method was applied to investigate the thermal properties of these polymers and it was found that PBT block acts as an element that produces stiffness...
-
E-Beam Effects on Poly(Xylitol Dicarboxylate-co-diol Dicarboxylate) Elastomers Tailored by Adjusting Monomer Chain Length
Publication -
Glass transition temperatures of polyurethane-urea elastomers based on N, N′-ethylenethiourea and N, N′-ethyleneurea as chain extenders
Publication -
Badania właściwości elastomeru polimerowego jako materiału do redukcji drgań budowli poddanych obciążeniom sejsmicznym i parasejsmicznym
PublicationCelem niniejszej pracy jest przedstawienie wyników badań eksperymentalnych, przeprowadzonych na próbkach wykonanych z elastomeru polimerowego, wykorzystywanego w metodzie złączy podatnych. W referacie zaprezentowano wyniki badań statycznych dla ściskania oraz rozciągania, a także rezultaty z dynamiczno-mechanicznej analizy termicznej (DMA), której celem było przedstawienie zmian modułu zachowawczego, modułu stratności oraz tangensa...
-
Sustainable Strategy for Algae Biomass Waste Management via Development of Novel Bio-Based Thermoplastic Polyurethane Elastomers Composites
PublicationThis work concerns the waste management method of algae biomass wastes (ABW). For this purpose, we prepared bio-based thermoplastic polyurethane elastomer (bio-TPU) composites. Algae biomass wastes are derived from algal oil extraction of Chlorella vulgaris and from biomass of Enteromorpha and Zostera marina. ABWs were used in the bio-TPUs composites as a filler in the quantity of 1, 5, 10, and 15 wt.%. The bio-based composites...
-
Kompozytowe materiały poliuretanowo-gumowe otrzymywane z lanych elastomerów uretanowych i recyklatów gumowych
PublicationW pracy prezentujemy wyniki badań dotyczących nowej grupy kompozytowych materiałów poliuretanowo-gumowych (KPG), otrzymywanych przy udziale różnej ilości recyklatu gumowego (RG), w których jako osnowę wykorzystano opracowane w Katedrze Technologii Polimerów Politechniki Gdańskiej lane nienasycone poliestrouretany (PEUR), poddawane rodnikowej kopolimeryzacji sieciującej ze styrenem. Zastosowanie PEUR umożliwiło uzyskanie nowej grupy...
-
Mikrostruktura kompozytów poliuretanowo-gumowych, otrzymywanych in situ z elastomerów uretanowych i recyklatów gumowych
PublicationW pracy przedstawiono wyniki badań dotyczące mikrostruktury nowej grupy kompozytów poliuretanowo-gumowych (KPG). Materiały kompozytowe otrzymano in situ z lanych elastomerów ure-tanowych (LEU) i różnej ilości recyklatu gumowego (RG), uzyskiwanego w wyniku kriogenicznego rozdrabniania poużytkowych opon samochodowych. Mikrostrukturę przełomów KPG zbadano przy wykorzystaniu mikroskopii optycznej (OM) oraz transmisyjnej mikroskopii...
-
Badania NMR oligo(alkileno-estro-etero)dioli monomerów do syntezy elastomerów uretanowych.
PublicationPrzedstawiono wyniki badań NMR uzyskane dla oligo(alkileno-estro-etero)dioli otrzymanych w wyniku polikondensacji kwasu adypinowego z mieszaniną glikolu etylenowego i alfa- i gama-dihydroksy-oligooksypropylenu o Mn=450g/ml.
-
Badanie NMR oligo(alkileno-estro-etero)dioli - monomerów do syntezy elastomerów uretanowych
PublicationCelem pracy było ustalenie rozkładu merów w zsyntezowanych oligo(alkileno-estro-etero)diolach. Ich budowę scharakteryzowano na podstawie danych z analizy widm ^1H NMR, których interpretacji dokonano wykorzystując widma COSY. Z wartości integracji odpowiednich sygnałów ustalono średnią długość cząsteczki polimeru i stopień przereagowania substratów reakcji. Bardziej szczegółowe informacje o strukturze, w tym o rozkładzie różnych...
-
Wpływ budowy i krótkich czasów wygrzewania na stabilność termiczną lanych elastomerów uretanowych
PublicationW pracy przedstawiono syntezę lanych elastomerów uretanowych otrzymywanych metodą dwuetapową. Prepolimery o stężeniu grup NCO 6,5 i 7,9% otrzymano z diizocyjanianu difenylometanu (MDI) i Polesu 55/20, które przedłużano glikolem butylenowym, zawierającym katalizator DABCO. Poliuretany zsyntetyzowano przy stosunkach molowych NCO:OH od 0,95 do 1,15. Sieciowanie PUR przeprowadzono w przyjętych czasach w temperaturze 110 st.C. Do...
-
Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment
PublicationIn this paper, low-temperature extrusion of ground tire rubber was performed as a proecological waste tires recycling method. During this process, ground tire rubber was modified with constant content of dicumyl peroxide and a variable amount of elastomer (in the range: 2.5–15 phr). During the studies, three types of elastomers were used: styrene-butadiene rubber, styreneethylene/butylene-styrene grafted with maleic anhydride and...
-
Właściwości elastomerów poliuretanowych przewidzianych do zastosowania jako rdzeń polimerowy w elementach warstwowych typu SPS
PublicationPrzedstawiono wyniki badań właściwości wytrzymałościowych i termomechanicznych (DMTA)lanych elastomerów uretanowych przeznaczonych na rdzeń polimerowy w układach warstwowych stalowo-polimerowych znanych jako konstrukcje SPS (sandwich plate system). Poliuretany syntetyzowano metodą prepolimerową z diizocyjanianu MDI oraz oligoestroli o różnej budowie i ciężarze cząsteczkowym. Prepolimery przedłużano, za pomocą glikoli, amin lub...
-
Oligouretanole otrzymane w wyniku glikolizy pianki poliuretanowej jako półprodukty do wytwarzania lanych elastomerów uretanowych
PublicationCelem pracy było otrzymanie i zbadanie właściwości oligouretanoli, produktów glikolizy odpadowej pianki poliuretanowej w recyklingu surowcowym oraz uzyskanych z nich lanych elastomerów uretanowych. Lane elastomery uretanowe syntezowano metodą prepolimerową. Prepolimer otrzymywano z 4,4'-diizocyjanianu difenylometanu (MDI) oraz mieszaniny oligouretanomerolu z polieterodiolem o nazwie handlowej Rokopol D2002 i następnie przedłużano...
-
Janusz Datta prof. dr hab. inż.
PeopleIn 1988, Janusz Datta finished his studies at the Gdańsk University of Technology (GUT), Faculty of Chemistry. Since then he has been employed at the Faculty of Chemistry in the Department of Polymer Technology. During the first six years of employement he was worked as a scientist. In this period, he travelled extensively to ZACHEM company located in Bydgoszcz to gain practical experience related to chemical processing. In 1994,...
-
Structure versus hydrolytic and thermal stability of bio-based thermoplastic polyurethane elastomers composed of hard and soft building blocks with high content of green carbon
PublicationNowadays, sustainability plays a key role in the design and synthesis of new materials. One of the methods for the preparation of green materials is incorporation into their structure the monomers with a high content of green carbon. Therefore, the aim of this work was to investigate the influence of the type and molecular mass of two bio-based polyester polyols and bio-glycol on the properties of aliphatic partially bio-based...
-
Eco-friendly Route for Thermoplastic Polyurethane Elastomers with Bio-based Hard Segments Composed of Bio-glycol and Mixtures of Aromatic–Aliphatic and Aliphatic–Aliphatic Diisocyanate
PublicationApplication of bio-based diisocyanates with low volatility instead petrochemical diisocyanates has positive impact on environment by reduction of hazardous effects on living organisms and lead to bio-based polyurethanes (bio-PUs) with good usage properties. This work was focused on the synthesis and chosen properties examination of partially bio-based thermoplastic polyurethane elastomers (bio-PUs) obtained using diisocyanate mixtures,...
-
To what extent can hyperelastic models make sense the effect of clay surface treatment on the mechanical properties of elastomeric nanocomposites?
PublicationThe poor knowledge about nonlinear mechanical behavior of elastomer nanocomposites arises from the incomplete information on the interface. Application of hyperelastic models provides more insights into the nature and the situation of interaction between the elastomeric matrix and nanofillers. The current work seeks to address the effect of interphase strength on tensile properties of the elastomer nanocomposites under large deformations....
-
Assessment of dynamic characteristics of thin cylindrical sandwich panels with magnetorheological core
PublicationBased on the equivalent single-layer linear theory for laminated shells, free and forced vibrations of thin cylindrical sandwich panels with magnetorheological core are studied. Five variants of available magnetorheological elastomers differing in their composition and physical properties are considered for smart viscoelastic core. Coupled differential equations in terms of displacements based on the generalized kinematic hypotheses...
-
Effect of Variation of Hard Segment Content and Graphene-Based Nanofiller Concentration on Morphological, Thermal, and Mechanical Properties of Polyurethane Nanocomposites
PublicationThis study describes the development of a new class of high-performance polyurethane elastomer nanocomposites containing reduced graphene oxide (RGO) or graphene nanoplatelets (GNP). Two types of polyurethane elastomers with different contents of hard segments (HS) were used as a polymer matrix. The developed nanocomposites were characterized by thermal analysis (DSC, TG), dynamic mechanical testing (DMA), hardness testing, mechanical...
-
Marcin Włoch dr inż.
People -
Nonlinear viscoelasticity in Three Dimensional filler reinforced rubber composites and nanocomposites
PublicationThis chapter describes the influence of three-dimensional nanofillers used in elastomers on the nonlinear viscoelastic properties. In particular, this part focuses and investigates the most important three-dimensional nanoparticles, which are used to produce rubber nanocomposites. The rheological and the dynamic mechanical properties of elastomeric polymers, reinforced with spherical nanoparticles, like POSS, titanium dioxide and...
-
Characterization and properties of LDPE/(ground tire rubber)/crosslinked butyl rubber blends
PublicationIn recent years, interest in used rubber recycling, mainly focusing on the utilization of end-of-life tires, has heightened. This interest, is owing to the activities related to environmental protection and economic factors, which both stimulate companies to reuse the high-quality rubber present in ground rubber scrap. In this study, the application of crosslinked butyl rubber in thermoplastic compositions of low-density polyethylene...
-
Synteza i właściwości poliuretanów otrzymanych z surowców odpadowych
PublicationPrzedstawiono sposób otrzymywania glikolizatów z odpadowych wyrobów wykonanych z lanych elastomerów uretanowych oraz wyniki prób wykorzystania tych glikolizatów jako monomerów w syntezie poliuretanów. Glikolizaty uzyskiwano w reakcji glikolu etylenowego z rozdrobnionym materiałem pochodzącym z wycofanych z eksploatacji listew poliuretanowych. Stosunek masowy odpadowego elastomeru uretanowego do glikolu zmieniano od 1:2 do 10:1....
-
Adolf Balas prof. dr hab. inż.
People -
Contact with coupled adhesion and friction: Computational framework, applications, and new insights
PublicationContact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al., (2019). We here develop a corresponding finite element framework that captures 3D finite-strain contact of two deformable bodies. This framework is suitable to investigate sliding friction even...
-
Crystallization kinetics study of dynamically vulcanized PA6/NBR/HNTs nanocomposites by nonisothermal differential scanning calorimetry
PublicationInvestigation of crystallization behavior and kinetics of thermoplastic elastomer nanocomposites was the subject of limited works because of complexities associated with semiexperimental modeling of such phenomenon in a system containing components having completely different behavior in the molten state. Nonisothermal crystallization kinetics of dynamically vulcanized PA6/NBR/HNTs thermoplastic elastomer nanocomposites was mathematically...
-
Shape Memory Materials from Rubbers
PublicationSmart materials are much discussed in the current research scenario. The shape memory effect is one of the most fascinating occurrences in smart materials, both in terms of the phenomenon and its applications. Many metal alloys and polymers exhibit the shape memory effect (SME). Shape memory properties of elastomers, such as rubbers, polyurethanes, and other elastomers, are discussed in depth in this paper. The theory, factors...
-
Influence of microwave treatment conditions of GTR on physico-mechanical and structural properties of NBR/NR/GTR composites
PublicationThe increasing amount of tires used in the industry induces the researchers to find alternatives to the recycling of the end-of-life tires. Several alternatives in order to application of ground tire rubber GTR include their incorporation as a filler in composites. The main issue in this approach is the lack of compatibility between GTR and polymer matrix. In order to solve this problem the devulcanization by microwaves has been...
-
FTIR spectroscopic and thermogravimetric characterization of ground tyre rubber devulcanized by microwave treatment
PublicationIn this work, the phenomena involved in the microwave devulcanization of ground tyre rubber (GTR) were investigated. Three types of GTR with different content of organic compounds (elastomers, plasticizers, etc.), carbon black and ash have been studied. The chemical structure of GTR before and after a microwave devulcanization process was analyzed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA)...
-
Morphology and the physical and thermal properties of thermoplastic polyurethane reinforced with thermally reduced graphene oxide
PublicationIn this study, thermally reduced graphene oxide (TRG)-containing polyurethane nanocomposites were obtained by the extrusion method. The content of TRG incorporated into polyurethane elastomer systems equaled 0.5, 1.0, 2.0 and 3.0 wt%. The morphology, static and dynamic mechanical properties, and thermal stability of the modified materials were investigated. The application of TRG resulted in a visible increase in material stiffness...
-
Nowe rozwiązania materiałowe w konstrukcji barek na wody płytkie
PublicationScharakteryzowano takie rozwiązania, jak konstrukcje sandwiczowe SPS, elastomery na części podwodne, stale niskostopowe na barki o płytkim zanurzeniu.
-
Wykorzystanie surowców odnawialnych i odpadowych w syntezie poliuretanów
PublicationNa podstawie literatury i badañ w³asnych przedstawiono stan wiedzy na temat mo¿liwooeci stosowania w syntezie poliuretanów surowców odnawialnych i odpadowych, g³ównie polioli pochodzenia rooelinnego, gliceryny odpadowej z produkcji biodiesla i oleju talowego.
-
Modyfikacja właściwości trybologicznych poliuretanów
PublicationPrzedstawiono metody modyfikacji właściwości trybologicznych poliuretanów i kompozytów poliuretanowych oraz metody badań tych właściwości. Porównano materiały pod względem odporności na zużycie i ścieranie.
-
Charakterystyka sieciowania, statyczne i dynamiczne właściwości mechaniczne mieszanin kauczuk butadieno-styrenowy/regenerat gumowy
PublicationPrzedstawiono wyniki badań wpływu zawartości regeneratu gumowego na charakterystykę procesu wulkanizacji, prowadzonego z użyciem różnych ilości przyspieszaczy, oraz na statyczne i dynamiczne właoeciwooeci mechaniczne zwulkanizowanych mieszanin kauczuku butadienowo-styrenowego i regeneratu gumowego. Regenerację miału gumowego prowadzono w wytłaczarce dwuślimakowej współbieżnej. Wzrost zawartości regeneratu gumowego (10-50 phr) w...
-
Zagospodarowanie zużytych opon w świetle prawodawstwa obowiązującego w Polsce
PublicationIlość odpadów gumowych, w szczególności zużytych opon, z roku na rok systematycznie wzrasta. W związku z tym pojawia się problem utylizacji i zagospodarowania opon wycofanych z eksploatacji. W artykule omówiono podstawowe sposoby recyklingu zużytych opon samochodowych, przedstawiono również zalety i wady poszczególnych metod. Jednym z istotnych problemów, dotyczących wdrażania procesów recyklingu jest nieznajomość bądź niestosowanie...
-
Metody modyfikacji chemicznej powierzchni ziaren recyklatu gumowego oraz wyrobów gumowych prowadzące do poprawy ich adhezji do poliuretanu
PublicationW kompozytach poliuretanowo-gumowych słabe oddziaływania fizyczne i chemiczne polarnych osnów poliuretanowych z niepolarnymi cząstkami recyklatów gumowych powodują obniżanie ich wytrzymałości mechanicznej, w miarę zwiększania ilości recyklatu gumowego, który został użyty do ich otrzymania. Problem ten można rozwiązać poprzez modyfikację powierzchni ziaren recyklatu gumowego, na drodze różnego rodzaju procesów chemicznych i fizycznych....
-
Przegląd metod produkcji regeneratu gumowego oraz możliwości jego zastosowania
PublicationRecykling materiałowy odpadów gumowych nabiera obecnie coraz większego znaczenia, stanowiąc alternatywę dla powszechnie stosowanego w Polsce odzysku energetycznego. W artykule zaprezentowano przegląd historyczny oraz obecny stan wiedzy w dziedzinie regeneracji odpadów gumowych. Publikacja zawiera charakterystykę najczęściej stosowanych metod dewulkanizacji odpadów gumowych oraz prezentuje możliwości wykorzystania regenerowanej...
-
Zastosowanie kopolimerów blokowych i recyklatów gumowych do modyfikacji asfaltów
PublicationW artykule przedstawiono przegląd literatury polskiej i zagranicznej, dotyczący modyfikacji asfaltów za pomocą kopolimerów blokowych, kopolimerów blokowych i siarki oraz kopolimerów blokowych z dodatkiem nanocząstek.
-
Właściwości mieszanin typu recyklat polietylenu-miał gumowy modyfikowanych poliizobutylenem w obecności nadtlenków
PublicationMiał gumowy poddawano modyfikacji poliizobutylenem metodą mieszania w warunkach ścinania w obecności nadtlenków lub bez nich. Miał gumowy modyfikowany poliizobutylenem przerabiano w mieszalniku firmy Brabender wraz z poprodukcyjnym recyklatem polietylenu wysokiej gęstości w stosunku wagowym 50:50. Określono statyczne i dynamiczne właściwości mechaniczne otrzymanych kompozycji termoplastycznych.
-
Przeciwutleniacze stosowane w produkcji wyrobów gumowych. Część I. Procesy starzenia gumy i obecnie stosowane przeciwutleniacze - przegląd, korzyści i zagrożenia
PublicationMateriały gumowe ulegają procesom zużycia i starzenia, które początkowo obniżają ich jakość, a w efekcie uniemożliwiają dalsze użytkowanie wyrobów ze względu na pogorszenie właściwości mechanicznych. Zapobieganie procesom degradacji materiałów gumowych obejmuje stosowanie środków przeciwstarzeniowych, takich jak przeciwutleniacze lub antyozonanty. Przedstawiona praca przeglądowa stanowi pierwszą część artykułu dotyczącego przeciwutleniaczy...
-
Mechanical and thermo-mechanical properties of natural rubber composites filled with submicron- and nano-sized silica particles and prepared using glycolysate as a plasticizer
PublicationThe main aim of this work was to examine the selected mechanical and thermo-mechanical properties of natural rubber/silica composites prepared using glycolysate as a plasticizer. Prepared composites contained different amounts of submicron- (10, 15, 20 or 25 pphr) or nano-particles (0.5, 0.75, 1.0 or 1.25 pphr). The tensile properties, tear resistance, hardness, abrasion resistance and resilience of prepared materials were determined....
-
Biodegradowalne poliuretany dla medycyny
PublicationPrzedstawiono przegląd literatury dotyczącej wytwarzania biodegradowalnych poliuretanów (PUR) i zastosowania ich w medycynie jako czasowych implantów. Omówiono wytwarzanie i właściwości mieszanin PUR z poli(L-laktydem) oraz liniowych i usieciowanych poliuretanów z wbudowanymi, biodegradowalnymi segmentami z poliestrów lub kopoliestrów. Opisano metody syntezy diizocyjanianowej pochodnej L-lizyny jako substratu do syntezy PUR degradujących...