Wyszukiwarka
Filtry
wszystkich: 1233
wybranych: 947
Wyniki wyszukiwania dla: conchoidal path of contact
-
High load capacity spur gears with conchoidal path of contact
PublikacjaThe present study is devoted to investigation of spur gears with a conchoidal path of contact and a convex-convex contact between teeth. The load capacity and energy efficiency were evaluated using both theoretical and experimental approaches. The theoretical analysis showed that the conchoidal gear pairs are 5–21% stronger in terms of contact stress and have similar energy efficiency as compared to the involute gear pairs of the...
-
FURTHER REMARKS ON THE SURFACE VIS IMPRESSA CAUSED BY A FLUID-SOLID CONTACT
PublikacjaIt is well-known that, nano-mechanics should take into account not only physical phenomena occuring within the bulk but, first of all, the physical phenomena appropriate for a surface of two materials contact. The huge volume density of internal surfaces as well countours lines located within the nanomaterial results in our interest in, apart from classical form of mass, momentum and entropy transport, those modes of transportation...
-
Microstructure and residual stresses in surface coatings with PTFE reservoirs
PublikacjaThe paper presents the results of experimental study into the microstructure and changes in residual stresses resulting from sliding and rolling/sliding loaded interaction between metallic surface coatings with embedded PTFE reservoirs and various counter faces. It was found that before testing surface coatings had compressive residual stresses. Molybdenum coating with all types of PTFE reservoirs displayed, as a result of testing,...
-
Application of the Fractional Fourier Transform for dispersion compensation in signals from a fiber-based Fabry-Perot interferometer
PublikacjaOptical methods of measurement do not require contact of a probe and the object under study, and thus have found use in a broad range of applications such as nondestructive testing (NDT), where noninvasive measurement is crucial. Measuring the refractive index of a material can give a valuable insight into its composition. Low‑coherence radiation sources enable measurement of the sample’s properties across a wide spectrum, while...
-
Selected local stability problems of channel section flanges made of aluminium alloys
PublikacjaThe paper addresses the issue of local buckling of compressed flanges of cold-formed thin-walled channel columns and beams with nonstandard flanges composed of aluminium alloys. The material behaviour follows the Ramberg–Osgood law. It should be noted that the proposed solution may be also applied for other materials, for example: stainless steel, carbon steel. The paper is motivated by an increasing interest in nonstandard cold-formed...
-
Termination functions for evolutionary path planning algorithm
PublikacjaIn this paper a study of termination functions (stop criterion) for evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Five...
-
The new version of contact-less method for localisation of catenary contact wire – theoretical assumption
PublikacjaThis article presents the theoretical basic of a new version of contact-less method for localising the catenary contact wires, using the advanced video techniques and image analysis. So far, contact line diagnostic systems exploited nowadays uses the contact measuring methods with special design current collector. This solutions make it impossible to measure the contact line geometry in a static way. The proposed measurement method...
-
Non-standard contact conditions in generalized continua: microblock contact model for a Cosserat body
PublikacjaGeneralized continuum theories involve non-standard boundary conditions that are associated with the additional kinematic variables introduced in those theories, e.g., higher gradients of the displacement field or additional kinematic degrees of freedom. Accordingly, formulation of a contact problem for such a continuum necessarily requires that adequate contact conditions are formulated for the additional kinematic variables and/or...
-
The Niching Mechanism in the Evolutionary Method of Path Planning
PublikacjaThis paper presents the concept of the niching mechanism in the evolutionary method of path planning. The problem is considered based on the example of a ship path planning. In this method the diversity of individuals is tested in respect to their physical distance, not the fitness function value. The researches show that such an approach increases effectiveness of solution space exploration, what results in a final solution with...
-
The complexity of minimum-length path decompositions
PublikacjaWe consider a bi-criteria generalization of the pathwidth problem, where, for given integers k, l and a graph G, we ask whether there exists a path decomposition P of G such that the width of P is at most k and the number of bags in P, i.e., the length of P, is at most l. We provide a complete complexity classification of the problem in terms of k and l for general graphs. Contrary to the original pathwidth problem, which is fixed-parameter...
-
Impact of Initial Population on Evolutionary Path Planning Algorithm
PublikacjaIn this paper an impact of initial population on evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal shippaths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Four tests are performed....
-
Measurement of Latency in the Android Audio Path
PublikacjaThis paper provides a description of experimental investigations concerning comparison between the audio path characteristics of various Android versions. First, information about the changes in each system version in the context of latency caused by them is presented. Then, a measurement procedure employing available applications to measure latency is described comparing to results contained in the Internet. Finally, a comparison...
-
Impact of Initial Population on Evolutionary Path Planning Algorithm
PublikacjaIn this paper an impact of initial population on evolutionary path planning algorithm is presented. Tested algorithm is used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. For the simulation purposes a close to real tested environment is created. Four tests are performed....
-
Path dependence, modularity and the offshoring of (some) physician services
PublikacjaThis paper integrates ideas from modularity and path dependency to explain the potential for and limitations of the offshoring of high value added physician services. While not all medical services are amenable to offshoring, a growing number of physician activities can be viewed as modular components which, at least technically, could be performed remotely. As a result, the presumption that concerns for efficiency dictate how...
-
Propagation Path Loss Modeling in Container Terminal Environment
PublikacjaThis paper describes novel method of path loss modeling for radio communication channels in container port area. Multi-variate empirical model is presented, based on multidimensional regression analysis of real path loss measurements from container terminal environment. The measurement instruments used in propagation studies in port area are also described.
-
Evaluation of Path Based Methods for Conceptual Representation of the Text
PublikacjaTypical text clustering methods use the bag of words (BoW) representation to describe content of documents. However, this method is known to have several limitations. Employing Wikipedia as the lexical knowledge base has shown an improvement of the text representation for data-mining purposes. Promising extensions of that trend employ hierarchical organization of Wikipedia category system. In this paper we propose three path-based...
-
Path Loss Analysis in Off-Body Channels in Indoor Environment
PublikacjaThis temporary document describes an analysis of path loss in off-body channels in an indoor environment. The influence of body orientation and on-body antenna placement on path loss in off-body communications as well as of different bodies has been investigated. Five static scenarios, six distances between body and antenna and eight body orientations were analysed; moreover, two dynamic scenarios were investigated. The smallest...
-
Path Loss Modelling in the Untypical Outdoor Propagation Environments
PublikacjaIn the paper three ways of path loss modelling in the untypical outdoor environments are presented. The exemplary untypical outdoor environment is analyzed. The investigated environment is characterized, and the measurement campaign are shortly described. The following models have been analyzed: the COST231 Walfisch-Ikegami model, the modified COST231Walfisch-Ikegami model tuned on the basis of empirical data, and the empirical...
-
Measurements of Path Loss in Off-Body Channels in Indoor Environments
PublikacjaThis paper presents a measurements of the path loss for validation of a statistical model for off-body radio channels in an indoor multipath environment, which considers the distance dependent mean path loss, and describes body shadowing and fast fading components in a statistical way. The measurement equipment and propagation indoor environment have been presented. Two different bodies and five static and two walking scenarios...
-
New First - Path Detector for LTE Positioning Reference Signals
PublikacjaIn today's world, where positioning applications reached a huge popularity and became virtually ubiquitous, there is a strong need for determining a device location as accurately as possible. A particularly important role in positioning play cellular networks, such as Long Term Evolution (LTE). In the LTE Observed Time Difference of Arrival (OTDOA) positioning method, precision of device location estimation depends on accuracy...
-
Comparison of Selection Schemes in Evolutionary Method of Path Planning
PublikacjaThis article compares an impact of using various selection schemes on the quality of the solution for the problem of planning the path for a moving object using the evolutionary method. In study case problem of avoiding collisions at sea is analyzed. The modelled environment includes static constraints (lands, canals, etc.) and dynamic objects (moving ships). Article analyses behaviour of selection schemes in two similar environments...
-
Finding small-width connected path decompositions in polynomial time
PublikacjaA connected path decomposition of a simple graph $G$ is a path decomposition $(X_1,\ldots,X_l)$ such that the subgraph of $G$ induced by $X_1\cup\cdots\cup X_i$ is connected for each $i\in\{1,\ldots,l\}$. The connected pathwidth of $G$ is then the minimum width over all connected path decompositions of $G$. We prove that for each fixed $k$, the connected pathwidth of any input graph can be computed in polynomial-time. This answers...
-
Path Loss Modelling for Location Service Applications
PublikacjaThe aim of this paper is the path loss modeling for the radiolocation services in radiocommunication networks, particularly in cellular networks. The main results of the measurements obtained in the physical layer of the UMTS are introduced. A new method for the utilization of the multipath propagation phenomenon to improve the estimation of the distance between the mobile station (MS) and the base station (BS) is outlined. This...
-
Path Loss Measurements in Wideband Radio Link Designed for Maritime Environment
PublikacjaIn the article, the research and analysis of path loss in designed and evaluated digital radio link for high-speed data transmission in maritime environment is presented. Collected samples of received signal were used to determine the mean path loss and its standard deviation. Measuring campaign was carried out in a real maritime conditions. The mean value of path loss reached 126 dB on a distance of 11.16 km.
-
Estimation of electrode contact in capacitive ECG measurement
PublikacjaIn the paper a method of electrode’s contact estimation in capacitive electrocardiogram (CECG) is presented. Proposed solution allows estimation of contact quality for each individual electrode. This enables construction of multi-electrode CECG systems, where electrode pairs can be selected on the basis of the individual electrode contact quality.
-
Measurements of Path Loss in Off-Body Channels in Indoor Environments
PublikacjaThe main goal of the paper is to investigate the influence of body orientation and on-body antenna placement on the path loss in off-body communications. In addition, the influence of different bodies is analysed.
-
Selection Pressure in the Evolutionary Path Planning Problem
PublikacjaThis article compares an impact of using various post-selection methods on the selection pressure and the quality of the solution for the problem of planning the path for a moving object using the evolutionary method. The concept of selection pressure and different methods of post-selection are presented. Article analyses behaviour of post-selection for four options of evolutionary algorithms. Based on the results achieved, waveform...
-
Distributed Evolutionary Algorithm for Path Planning in Navigation Situation
PublikacjaThis article presents the use of a multi-population distributed evolutionary algorithm for path planning in navigation situation. The algorithm used is with partially exchanged population and migration between independently evolving populations. In this paper a comparison between a multi-population and a classic single-population algorithm takes place. The impact on the ultimate solution has been researched. It was shown that using...
-
An Approach to Mean Path Loss Model Estimation for Off-Body Channels
PublikacjaThis paper presents an approach to estimation of the mean path loss model parameters in off-body Body Area Networks channels. In this approach, the path loss exponent is constrained to a value obtained for the line-of-sight (LoS) propagation in the co-polarised channel, considering a generalised static scenario. The comparison of the goodness of fit between the proposed approach and other approaches, for a set of measurements obtained...
-
Path-based methods on categorical structures for conceptual representation of wikipedia articles
PublikacjaMachine learning algorithms applied to text categorization mostly employ the Bag of Words (BoW) representation to describe the content of the documents. This method has been successfully used in many applications, but it is known to have several limitations. One way of improving text representation is usage of Wikipedia as the lexical knowledge base – an approach that has already shown promising results in many research studies....
-
Performance of lubricated sliding contact in magnetic field
PublikacjaResults of experimental studies concerning theinfluence of permanent magnetic field on wear of lubricatedsliding contact operating at short stroke and highfrequency are presented. It was found that horizontalmagnetic is affecting performance of the contact. Thejagged delamination regions produced in the presence of amagnetic field can be regarded as easily undergoing oxidisationbecause oxygen is readily adsorbed there. Magneticfield...
-
3D scanning system for railway current collector contact strips
PublikacjaUndisturbed collection of current from a contact wire of the catenary constitutes one of the basic elements in reliable operation of electrified rail transport, particularly when vehicles move at high speed. Quality of current collection is influenced by the construction of catenary and current collectors, as well as by the technical condition and regulation of these two elements. Total contact force of a current collector head...
-
Path planning algorithm for ship collisions avoidance in environment with changing strategy of dynamic obstacles
PublikacjaIn this paper a path planning algorithm for the ship collision avoidance is presented. Tested algorithm is used to determine close to optimal ship paths taking into account changing strategy of dynamic obstacles. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. Principle of operation of evolutionary algorithm and based on it dedicated application...
-
On the Usefulness of the Generalised Additive Model for Mean Path Loss Estimation in Body Area Networks
PublikacjaIn this article, the usefulness of the Generalised Additive Model for mean path loss estimation in Body Area Networks is investigated. The research concerns a narrow-band indoor off-body network operating at 2.45 GHz, being based on measurements performed with four different users. The mean path loss is modelled as a sum of four components that depend on path length, antenna orientation angle, absolute difference between transmitting...
-
Comparison of Single and Multi-Population Evolutionary Algorithm for Path Planning in Navigation Situation
PublikacjaIn this paper a comparison of single and multi-population evolutionary algorithm is presented. Tested algorithms are used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. Principle of operation of single-population and multi-population evolutionary algorithm is described....
-
Visual method for detecting critical damage in railway contact strips
PublikacjaEnsuring an uninterrupted supply of power in the electric traction is vital for the safety of this important transport system. For this purpose, monitoring and diagnostics of the technical condition of the vehicle's power supply elements are becoming increasingly common. This paper presents a new visual method for detecting contact strip damage, based on measurement and analysis of the movement of the overhead contact line (OCL)...
-
Non-Contact Temperature Measurements Dataset
PublikacjaThe dataset titled The influence of the distance of the pyrometer from the surface of the radiating object on the accuracy of measurements contains temperature measurements using a selection of four commercially available pyrometers (CHY 314P, TM-F03B, TFA 31.1125 and AB-8855) as a function of the measuring distance. The dataset allows a comparison of the accuracy and measuring precision of the devices, which are very important...
-
Determination of binder-aggregate adhesion by contact angle measurement
PublikacjaThe key factor in asphalt pavement durability, especially in the presence of water, is adhesion of the bituminous binder to mineral aggregates. There are currently no standard laboratory test procedures that can quickly and accurately measure the strength of the interaction (bond) between the binder and aggregate. In this regard, to evaluate the adhesion force measurements based on the contact angle between the binder and the aggregate...
-
Optimization of The Shortest-Path Routing with Equal-Cost Multi-Path Load Balancing
Publikacja -
Robustness of contact-less optical method, used for measuring contact wire position in changeable lighting conditions
PublikacjaThe article presents verification of robustness of contactless method based on 2D image camera, which is used to measure catenary contact wire position in changeable ambient lighting conditions. Robustness in changeable lighting conditions is ensured through the combination of advanced image processing for background information removal and the algorithm of error correction. This algorithm detects incorrect images and substitutes...
-
Path Loss Analysis for the IoT Applications in the Urban and Indoor Environments
PublikacjaThe Internet of Things (IoT) networks concept implies their presence in a various and untypical locations, usually with a disturbed radio signals propagation. In the presented paper an investigation of an additional path loss observed in an underground environment was described. The proposed measurement locations correspond to the operation areas of rapidly growing narrowband IoT (NBIoT) networks, the ones using the Long Term Evolution...
-
Autonomous port management based AGV path planning and optimization via an ensemble reinforcement learning framework
PublikacjaThe rapid development of shipping trade pushes automated container terminals toward the direction of intelligence, safety and efficiency. In particular, the formulation of AGV scheduling tasks and the safety and stability of transportation path is an important part of port operation and management, and it is one of the basic tasks to build an intelligent port. Existing research mainly focuses on collaborative operation between...
-
A Centralized Reputation System for MANETs Based on Observed Path Performance
PublikacjaA reputation system for MANETs is described that attempts to deduce nodal trustworthiness (forwarding behaviour) from observed end-to-end path performance. The trustworthiness deduction algorithm produces interval estimates and works well if node misbehaviour is not selec-tive with respect to traversing paths. Nodal reputation levels are next calculated in the spirit of generous tit-for-tat so as to best reflect momentary nodal...
-
Path Coloring and Routing in Graphs.
PublikacjaW rozdziale omówione zostały problemy kolorowania ścieżek i routingu w grafach. Podano podstawowe definicje związane z tymi problemami, znane wyniki wraz z dyskusją złożoności obliczeniowej dla grafów ogólnych i dla kilku podstawowych klas grafów oraz zastosowania.
-
Experimental verification of visual method for measuring displacements of contact line elements
PublikacjaThe increase of rail vehicles speed, as well as the increase of their power, puts high demands on the power delivery system for traction vehicles The most critical point in the vehicle's power supply circuit is the contact between the current collector and contact wires. Ensuring a reliable co-operation of the current collector and contact line, requires technical development...
-
Specialization and inequality along the development path: an interindustry analysis.
PublikacjaCelem niniejszej rozprawy doktorskiej jest przeprowadzenie empirycznej analizy procesów zwišzanych ze zmianami w strukturze specjalizacyjnej państw w procesie rozwoju ekonpmicznego oraz zwišzanych z nimi efektami dystrybucyjnymi dotyczšcymi rozkładu płac i dochodu. Rozprawa składa się z czterech częci: I. Employment and export specialization patterns versus GDP per capita performance - unifying approach; II.Determinants of export...
-
Experimental research on evolutionary path planning algorithm with fitness function scaling for collision scenarios
PublikacjaThis article presents typical ship collision scenarios, simulated using the evolutionary path planning system and analyses the impact of the fitness function scaling on the quality of the solution. The function scaling decreases the selective pressure, which facilitates leaving the local optimum in the calculation process and further exploration of the solution space. The performed investigations have proved that the use of scaling...
-
Study of the Operation of Synchronous Generator Voltage Regulator During the Creation of Post Blackout Start-up Path
PublikacjaThis paper presents the influence of automatic voltage regulator (AVR) of synchronous generator on the process of creation of post black-out start-up path. Two elements of AVR have a significant impact on this process: underexcitation limiter (UEL) and load compensation (LC). The authors present a theoretical investigation and simulation results that illustrate how the mentioned elements of AVR affect voltage levels in a power...
-
Tribological performance of PTFE-metal binary coatings in rolling/sliding contact
PublikacjaTribological performance of surface coatings with embedded PTFE reservoirs in rolling/sliding contact is reported. Using two different coating materials and two shapes and patterns of PTFE reservoirs test samples in the form of discs were prepared and tested in a four-ball contact configuration under loads corresponding to nominal contact pressure of 0.5 and 1.0 GPa. It was found that one coating, namely aluminium-bronze with embedded...
-
Contact with coupled adhesion and friction: Computational framework, applications, and new insights
PublikacjaContact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al., (2019). We here develop a corresponding finite element framework that captures 3D finite-strain contact of two deformable bodies. This framework is suitable to investigate sliding friction even...