Wyszukiwarka
Filtry
wszystkich: 212
Wyniki wyszukiwania dla: THEORETICAL CONSIDERATIONS
-
Inlet air fogging of marine gas turbine in power output loss compensation
PublikacjaThe use of inlet air fogging installation to boost the power for gas turbine engines is widely applied in the power generation sector. The application of fogging to mechanical drive is rarely considered in the literature [1]. This paper will cover some considerations relating to its application to gas turbines in ship drive. There is an important evaporative cooling potential throughout the world when the dynamic data is evaluated,...
-
Ionosphere variability II: Advances in theory and modeling
PublikacjaThis paper aims to provide an overview on recent advances in ionospheric modeling capabilities, with the emphasis in the efforts relevant to electron density variability. The discussion spans a wide range of model formulations (e.g., from purely empirical to physics-based ones and data-driven approaches) seeking for advances or gaps with regard to present challenges. This discussion is further supported by consideration of the...
-
Non-adiabatic Effects in Pressure Drop Calculations in Flow Boiling and Flow Condensation in Minichannels
PublikacjaConsiderations presented in the paper relate both to the case of flow boiling and flow condensation in conventional channels as well as small diameter ones. Authors devoted all the possible attention that the modeling presented is applicable to the whole range of quality variation in both cases of condensation and boiling. The form of two-phase flow multiplier, which is a major factor in modeling presented here, should be capable...
-
Digitalization and digital skills development patterns. Evidence for European countries
PublikacjaThis chapter contextualizes the digitalization process and the digital skills concept. It discusses the very process of technology diffusion, emphasizing several unique features of digital technologies that make them globally available. Next, it turns to the digital skills concept, clarifying how and why they reshape the societal and economic landscape. It also briefly addresses the digital divide and skill-biased technological...
-
Landscape, EIA and decision-making. A case study of the Vistula Spit Canal, Poland
PublikacjaAlthough landscapes are often considered public goods, they frequently receive inadequate attention in Environmental Impact Assessments (EIAs), particularly in Poland. This neglect often leads to visible degradation during investment processes. This article examines the case of the Vistula Spit Canal, currently the largest engineering project under construction in Poland. We analysed whether the conclusions drawn in the EIA report,...
-
Ionosphere variability I: Advances in observational, monitoring and detection capabilities
PublikacjaThe paper aims to review recent advances regarding the observational and monitoring capabilities of the ionization conditions in the Earth's upper atmosphere. The analysis spans both ground and space-based experiments, seeking for new installations and/or missions, new or upgraded instrumentation and/or observational network establishments as means for advancing current understanding and prediction ability of the ionosphere variability....
-
Optimizing CO2 Purification in a Negative CO2 Emission Power Plant
PublikacjaIn the pursuit of mitigating CO2 emissions, this study investigates the optimisation of CO2 purification within a Negative CO2 Emission Power Plant using a spray ejector condenser (SEC) coupled with a separator. The approach involves direct-contact condensation of vapour, primarily composed of an inert gas (CO2), facilitated by a subcooled liquid spray. A comprehensive analysis is presented, employing a numerical model to simulate...
-
Challenges and future prospectives of MXenes
PublikacjaIn the context of nanotechnology, MXenes gained considerable attention as two-dimensional (2D) materials derived from layered transition metal carbides, nitrides, and carbonitrides. These materials display distinct characteristics with promising implications for a variety of practical applications. This book chapter provides an extensive exploration into MXenes’ fundamental concepts, such as how they are classified based on various...
-
HOW TO ASSESS THE MATURITY OF SMALL AND MEDIUM-SIZED ENTERPRISES TO LEAN SIX SIGMA PROJECTS
PublikacjaThis article describes the considerations for the implementation of the Lean Six Sigma (LSS) methodology in small and medium-sized enterprises. Pilot research was conducted in Polish and French SMEs (nine Polish and nine French enterprises from the service and production sectors) referring to the context of the implementation and application of the Lean Six Sigma concept. The studies led to the identification of the motives, needs,...
-
THE ARCHİTECTURE AND FASHİON DESİGN – An Examination of the Relationship between Fashion and Architecture Design in light of Technological Advancements
PublikacjaThe article focuses on the mutual relationship between two seemingly distant fields of art - architecture and fashion design. It describes a common basis for the process of creating art in the approach to both fashion and architecture. The following considerations, which are based on principles of composition, attempt to reach beyond just the form and analyze also context or perception. The article quotes famous creators and depicts...
-
Linear Pantographic Sheets: Existence and Uniqueness of Weak Solutions
Publikacjawe address the well-posedness of the planar linearized equilibrium problem for homogenized pantographic lattices. To do so: (i) we introduce a class of subsets of anisotropic Sobolev’s space as the most suitable energy space E relative to assigned boundary conditions; (ii) we prove that the considered strain energy density is coercive and positive definite in E ; (iii) we prove that the set of placements for which the strain...
-
Optimization of the spindle speed during milling of large-sized structures with the use of technique of Experiment-Aided Virtual Prototyping
PublikacjaIn the paper are presented considerations concerning vibration suppression problems during milling of large-sized workpieces with the use of innovative method of matching the spindle speed of cutting tool. It depends on repeatable change of the spindle speed value as soon as the optimal vibration state of the workpiece approaches. The values of dominant “peaks” in the frequency spectra and the Root Mean Square (RMS) values of time...
-
Bridging the gap between architectural and environmental engineering education in the context of climate change
PublikacjaIndicated in this article is the urgent need to adjust architectural education to the challenges triggered by climate change. Although reports on the future scenarios for cities are alarming, documents that set criteria for architectural education do not indicate competencies related to climate change adaptation and mitigation, mainly by avoiding environmental engineering considerations. An immediate answer to this problem could...
-
The usage of the openBIM idea in architectural design on the example of Blender and BlenderBIM add-on
PublikacjaThe aim of the article is the research about the method and advancement of the openBIM idea implementation, clearly defined by the buildingSMART organization. The conducted analysis are limited to the Blender program and the BlenderBIM add-on and has been embedded in the context of the work of an architect and other IT solutions. The article presents four aspects of the openBIM concept implementation. The first approach relates...
-
Toolchain Modeling: Comprehensive Engineering Plans for Industry 4.0
PublikacjaThe fourth industrial revolution (Industry 4.0) elevates the complexity and autonomy of industrial systems and engineering environments to levels not seen before. The novel challenges involve not only the software running on the partaking autonomous devices, but also architectural considerations and the technological infrastructure around the entire engineering process. In this paper, complementing the trends in industrial systems...
-
Low cost real time UAV stereo photogrammetry modelling technique – accuracy considerations
PublikacjaThe paper presents accuracy considerations regarding three 3D modelling techniques. The tested new consumer type stereo camera (ZED 3D Stereolabs) has been implemented info an aerial mapping system, on board micro air vehicle MAV) and tested object has been mapped using a real-time photogrammetry with original real-time software application. The evaluated results has been compared with model gained with a state of art unmanned...
-
The influence of historical conditions on time and cost of construction project
PublikacjaConducting construction works in a building or in an area entered in the historic register is associated with the contracting authority's risk of incurring higher than planned costs of works, as well as delays in their implementation. In many cases, these deviations are completely independent of contracting authority and contractor. The aim of this article is to indicate the reasons for cost and time changes in the construction...
-
An optimal form of the finite element mass matrix in the analysis of longitudinal vibrations of rods
PublikacjaIn this paper, an attempt is made to find the optimal form of the mass matrix of a rod finite element, which allows one to obtain the smallest errors in the longitudinal frequency determination of natural vibrations of any boundary conditions within the whole range of determined frequencies. It is assumed that the mass matrix can be treated as a linear combination of the consistent and diagonal matrices. Based on analytical considerations,...
-
Application Isssues of the Semi-Markov Reliability Model
PublikacjaPredicting the reliability of marine internal combustion engines, for instance, is of particular importance, as it makes it possible to predict their future reliability states based on the information on the past states. Correct reliability prediction is a complex process which consists in processing empirical results obtained from operating practice, complemented by analytical considerations. The process of technical state changes...
-
APPLICABILITY OF INLET AIR FOGGING TO MARINE GAS TURBINE
PublikacjaThe dependency of marine gas turbine on the ambient temperature leads to a decrease of the gas turbine power output in arid areas. Very often gas turbine power output demand is high and the power margins originally designed into the driver , has been exhausted. In such circumstances the inlet air fogging is an effective compensation of gas turbine power. In this paper an analysis of inlet air fogging applicability to marine gas...
-
SHORT REVIEW AND 3-D FEM ANALYSIS OF BASIC TYPES OF FOUNDATION FOR OFFSHORE WIND TURBINES
PublikacjaSome problems of the foundations of offshore wind turbines are considered in this paper. A short review is presented on the two basic types of foundations, i.e. monopiles and gravity foundations, including their basic features and applications as well as general design considerations. Also, some issues regarding analysis are discussed, including geotechnical problems and modelling techniques. A numerical model of offshores turbine...
-
Factors Affecting the Effectiveness of Military Training in Virtual Reality Environment
PublikacjaIn this paper, we explored the factors influencing the effectiveness of military trainings performed in a virtual reality environment. The rationale for taking up the topic is the fact that such trainings are often conducted under specific operational procedures. These procedures may create rigorous frameworks for all elements of the learning environment, including the teacher’s performance. Therefore, to ensure the most conducive...
-
Optimization of Wireless Networks for Resilience to Adverse Weather Conditions
PublikacjaIn this chapter, we consider how adverse weather conditions such as rain or fog affect the performance of wireless networks, and how to optimize these networks so as to make them robust to these conditions. We first show how to analyze the weather conditions in order to make them useful for network optimization modelling. Using an example realistic network, we show how to optimize two types of wireless networks: free-space optical...
-
Comprehensive dimension scaling of multi-band antennas for operating frequencies and substrate parameters
PublikacjaIn this paper, low-cost and comprehensive redesign of multi-band antennas with respect to the operating frequencies and material parameters of the substrate is presented. Our approach exploits an inverse surrogate model identified based on a set of reference designs optimized at the level of coarse-discretization EM simulations of the antenna at hand. An iterative correction procedure is also implemented to account for the initial...
-
Organic Rankine as bottoming cycle to a combined Brayton and Clausius-Rankine cycle
PublikacjaThis paper presents an enhanced approach, as it will be considered here that the ORC installation could be extra-heated with the bleed steam, a concept presented by the authors. In such way the efficiency of the bottoming cycle can be increased and an amount of electricity generated increases. A thermodynamic analysis and a comparative study of the cycle efficiency for a simplified steam cycle cooperating with ORC cycle will be...
-
Architectural Heritage Virtual Models in Conservation Practice
PublikacjaThe article presents the issues concerning architectural heritage digital models’ applications in conservation practice. These considerations are discussed in the context of the commencement of creating virtual models regarding no-longer existing historical buildings in the first half of the 1980s. Such models’ applications and possible uses are analyzed within the adopted criteria that distinguish the following model types....
-
Specificity of Infant Digestive Conditions: Some Clues for Developing Relevant In Vitro Models
PublikacjaDigestion of nutrients is an essential function of the newborn infant gut to allow growth and development and understanding infant digestive function is essential to optimize nutrition and oral drug delivery. Ethical considerations prohibit invasive in vivo trials and as a consequence in vitro assays are often conducted. However, the choice of in vitro model parameters are not supported by an exhaustive analysis of the literature...
-
Application of Rapid Prototyping technology in the manufacturing of turbine blade with small diameter holes
PublikacjaThe article presents the possibilities of using Rapid Prototyping (RP) technology in the manufacturing of turbine blades with small diameter holes. The object under investigation was gas turbine blade with small diameter cooling holes and holes for generating longitudinal vortices. A turbine blade model was produced by means of Direct Metal Laser Sintering (DMLS) technology and subsequently validated in terms of detection and accuracy...
-
A simplified energy dissipation based model of heat transfer for post-dryout flow boiling
Publikacjamodel for post dryout mist flow heat transfer is presented based on considerations of energy dissipation in the flow. The model is an extension of authors own model developed earlier for saturated and subcooled flow boiling. In the former version of the model the heat transfer coefficient for the liquid singlephase convection as a reference was used, due to the lack of the appropriate model for heat transfer coefficient for the...
-
Rapid dimension scaling of compact microwave couplers with power split correction
PublikacjaIn this paper, a technique for rapid re-design ofcompact microwave couplers with respect to operating frequency is discussed. Our methodology involves an inverse surrogate model setup using several reference designs optimized (at the level of equivalent circuit representation of the coupler) for a set of operating frequencies within a range of interest. The surrogate establishes the relationship between the operating frequency...
-
The computational complexity of the backbone coloring problem for planar graphs with connected backbones
PublikacjaIn the paper we study the computational complexity of the backbone coloring problem for planar graphs with connected backbones. For every possible value of integer parameters λ≥2 and k≥1 we show that the following problem: Instance: A simple planar graph GG, its connected spanning subgraph (backbone) HH. Question: Is there a λ-backbone coloring c of G with backbone H such that maxc(V(G))≤k? is either NP-complete or polynomially...
-
DETERMINATION OF VERTICAL DISPLACEMENTS IN RELATIVE MONITORING NETWORKS
PublikacjaThe problem of determining displacements of objects is an important and current issue, in particular in terms of operational safety. This is a requirement that covers geodetic, periodic control measurements in order to determine horizontal and vertical displacements. The paper is focused on the analysis of vertical displacements. Geodetic measurements and their interpretation allow to reduce the risk of possible structural catastrophes....
-
Ferrofluids based analytical extractions and evaluation of their greenness
PublikacjaFerrofluids are stable dispersions of magnetic nanoparticles in a carrier liquid. They have attracted considerable attention in analytical extractions as they combine fluid-like properties with magnetic character, providing magnetic control over the extraction process. The synthesis of ferrofluids is very straightforward, and it generally involves the preparation of magnetic nanoparticles, their coating, and then mixing in a suitable...
-
Green analytical chemistry as an integral part of sustainable education development
PublikacjaGreen chemistry is an important way of thinking in the field of chemistry and aims to conduct processes in accordance with the principles of sustainable development. It is the application of a wide range of principles that minimize the impact of both chemical processes and products on the environment. And what about analytical chemistry? Without a doubt, analytical chemistry plays an important role in the sustainable development...
-
The role of sport in the Smart City concept
PublikacjaSport brings to cities innovative solutions that influence urban life, yet considerations about sport still rarely contribute to the development of the very popular smart city concept. This raises the question: what is the perception of sport in the city from the perspective of the smart city concept? One of the challenges of future urban policy is to provide initiatives that ensure the wellbeing and promote the model of a healthy...
-
A new relevant membrane application: CO2 direct air capture (DAC)
PublikacjaSince carbon dioxide (CO2) is the primary greenhouse gas emitted into the atmosphere due to human activities, strong research efforts have been developed towards capturing and decreasing its production. Unfortunately, specific processes and activities make it impossible to avoid CO2 emissions. Among the different strategies scientists propose for CO2 reduction, direct CO2 capture from the atmosphere, also known as direct air capture...
-
Analyzing Preconditions to Introduce Internet Voting in Portugal: Insights from the Estonian Model
PublikacjaInternet voting has been trialed or introduced for several countries, including Norway, Portugal, United States, United Kingdom and Switzerland as an additional voting channel to increase voter turnout and, also to modernize the electoral process. However, only Estonia has successful introduced internet voting, deploying e-enabled elections in general governmental levels. This paper aims to provide an exploratory study on the Estonian...
-
Engineering Challenges in the Design of Cochlear Implants
PublikacjaHearing aids such as cochlear implants have been used by both adults and children for a long time. In addition, cochlear implants are used by patients who have severe hearing loss either by birth or after an accident. This paper aims to investigate the engineering challenges bounding the design of cochlear implants and present its possible solution...
-
THE APPLICATION OF KALMAN FILTERING TO PREDICT VERTICAL RAIL AXIS DISPLACEMENTS OF THE OVERHEAD CRANE BEING A COMPONENT OF SEAPORT TRANSPORT STRUCTURE
PublikacjaAs the devices designed to transport materials, the overhead cranes should meet certain geometric requirements for their operation to be safe. The presently available geodetic equipment, in particular total stations, provides opportunities for precise 3D measurements of coordinates of the controlled points. These coordinates make a basis for correcting the height of crane runway axes. The paper presents a method to calculate position...
-
Half-Order Modeling of Saturated Synchronous Machine
PublikacjaNoninteger order systems are used to model diffusion in conductive parts of electrical machines as they lead to more compact and knowledge models but also to improve their precision. In this paper a linear half-order impedance model of a ferromagnetic sheet deduced from the diffusion of magnetic field is briefly introduced. Then, from physical considerations and finite elements simulation, the nonlinear half-order impedance model...
-
Analytical method for calculation of heat source temperature drop for the Organic Rankine Cycle application
PublikacjaIn the paper presented are considerations on the cooperation of the limited capacity heat source with the Organic Rankine Cycle unit. Usually the heat source providing thermal energy to the Organic Rankine Cycle (ORC) may have twofold characteristics. It can be in the form of a single phase fluid, i.e. as hot exhaust gas or hot liquid, or in some cases it may be available as a phase changing fluid, as for example, technological...
-
Direct modulation for conventional matrix converters using analytical signals and barycentric coordinates
PublikacjaThis paper proposes the generalized direct modulation for Conventional Matrix Converters (CMC) using the concept of analytical signals and barycentric coordinates. The paper proposes a novel approach to the Pulse Width Modulation (PWM) duty cycle computing, which allows faster prototyping of direct control algorithms. The explanation of the new idea using analytical considerations demonstrating the principles of direct voltage...
-
Framework for Structural Health Monitoring of Steel Bridges by Computer Vision
PublikacjaThe monitoring of a structural condition of steel bridges is an important issue. Good condition of infrastructure facilities ensures the safety and economic well-being of society. At the same time, due to the continuous development, rising wealth of the society and socio-economic integration of countries, the number of infrastructural objects is growing. Therefore, there is a need to introduce an easy-to-use and relatively low-cost...
-
Towards an Understanding of the Stability Assessment of Floating Buildings
PublikacjaOne of the most important aspects of the design of floating facilities such as ships, floating offshore structures or floating houses is stability. Its impact on both general safety and operational aspects renders it a fundamental consideration already in preliminary design stages. Usually, the concept of sufficient stability of floating buildings is associated with the ability to keep an allowed heel angle and residual freeboard,...
-
Design-Oriented Constrained Modeling of Antenna Structures
PublikacjaFast surrogate models are crucially important to reduce the cost of design process of antenna structures. Due to curse of dimensionality, standard (data-driven) modeling methods exhibit serious limitations concerning the number of independent geometry parameters that can be handled but also (and even more importantly) their parameter ranges. In this work, a design-oriented modeling framework is proposed in which the surrogate is...
-
Sport as a Tool for the Development of Healthy and Sustainable Cities: A Strategic Documentation Review
PublikacjaThe rapidly changing cities and their environment are causing new challenges for which actions and solutions must be sought. Most of all, a major challenges facing cities are adverse environmental changes and issues related to public health and citizens well-being. Sport is present in the lives of most of us and is an essential component of urban infrastructure, while in relation to this, to what extent is it being used to support...
-
A simplified energy dissipation based model of heat transfer for subcooled flow boiling
PublikacjaIn the paper a model is presented based on energetic considerations for subcooled flow boiling heat transfer. The model is the extension of authors own model developed earlier for saturated flow boiling and condensation. In the former version of the model we used the heat transfer coefficient for the liquid single-phase as a reference level, due to the lack of the appropriate model for heat transfer coefficient for the subcooled...
-
Proposal of a mobile medical waste incinerator with automatic waste feeder and heat recovery system
PublikacjaThe paper presents and discusses the issue of medical waste (including hazardous ones) and their proper management. Inappropriate handling of infectious medical waste directly endangers the human being health and the environment. Infectious waste must therefore be properly disposed of – one of the most commonly used methods is the thermal treatment in the incinerators tailored for this purpose. During designing an incinerator unit,...
-
Proposal of a Mobile Medical Waste Incinerator with Application of Automatic Waste Feeder and Heat Recovery System as a Novelty in Poland
PublikacjaThe paper presents and discusses the issues of medical waste (including hazardous ones) and the problems regarding their proper management in Poland. Inappropriate handling of infectious medical waste directly endangers human health and the environment. Infectious waste must be properly disposed of—in practice, the only method of their disposal available in Poland is a thermal treatment in the incinerators tailored for this purpose....
-
EM‐driven constrained miniaturization of antennas using adaptive in‐band reflection acceptance threshold
PublikacjaNumerical optimization of geometry parameters is a critical stage of the design process of compact antennas. It is also challenging because size reduction is constrained by the necessity of fulfilling imposed electrical performance requirements. Furthermore, full‐wave electromagnetic (EM) analysis needs to be used for reliable performance evaluation of the antenna structure, which is computationally expensive. In this paper, an...