Wyszukiwarka
Wyniki wyszukiwania dla: PHOTOVOLTAIC CDTE MODULES
-
Recovery of Valuable Materials and Methods for Their Management When Recycling Thin-Film CdTe Photovoltaic Modules
PublikacjaDue to the development of new photovoltaic technologies, there is a need to research new recycling methods for these new materials. The recovery of metals from photovoltaic (PV) modules would reduce the consumption of raw materials. Therefore, the development of recycling technologies for used and damaged modules of newer generations is important for environmental reasons. The aim of the research is to shed light on the nature...
-
Alternative Energy: Photovoltaic Modules and Systems
PublikacjaUse of solar energy does not contribute to global warming. The light-to-current conversion (photovoltaic conversion) takes place within solar cells, which in most cases are made of silicon. Solar module consists of many solar cells, which are electrically connected and placed between glass or Tedlar® and framed by an aluminium frame. A number of solar modules and other components form photovoltaic systems. In this entry, a brief...
-
Alternative Energy: Photovoltaic Modules and Systems
Publikacja...
-
Influence of the fragment size on the recycling process of thin-film modules based on CdTe
PublikacjaFor several years, the production of second generation cells (the so-called thin film), produced from amorphous silicon, cadmium telluride (CdTe) or copper indium (gallium) diselenide (CI(G)S), has been increasing. The total number of end-of-life panels by 2050 is expected to reach 9.57 million tonnes. They contain heavy metals that can be leached into the environment at the land field. The EU directive on waste electrical and...
-
End-Of-Life Management of Photovoltaic Solar Modules
PublikacjaThe PV industry continues to push its credentials as a technology that addresses one of the fundamental challenges of our times – climate change. There are however two major concerns about this technology: first, the potential negative environmental impacts of energy used in the production stage and second, the possible shortage of the valuable materials in the future. The currently dominant semiconductor used in photovoltaic modules...
-
Pure silicon recovering from photovoltaic modules
PublikacjaOdzyskiwanie krzemu ze zużytych lub uszkodzonych modułów fotowoltaicznych może mieć znaczenie nie tylko ekonomiczne, ale również ekologiczne. Etap obejmujący procesy chemiczne wymaga optymalizacji z punktu widzenia wymaganej czystości odzyskiwanego krzemu. W pracy przedstawiono wyniki przeprowadzonych prób trawienia poszczególnych warstw ogniw PV: warstwy antyodblaskowej, metalizacji (kontaktów), złącza p-n. Skład roztworów trawiących...
-
Application of commercial supercapacitor modules in autonomic photovoltaic installations
PublikacjaDynamiczny rozwój technologii i konstrukcji superkondensatorów, napędzany głównie potrzebami przemysłu motoryzacyjnego pozwala na stwierdzenie, że stają się one coraz bardziej realną alternatywą dla konwencjonalnych akumulatorów stosowanych w autonomicznych instalacjach fotowoltaicznych.Za ich stosowaniem przemawiają takie zalety jak: możliwość szybkiego ładowania i rozładowania, wielokrotnie wyższa trwałość, bezobsługowość eksploatacji...
-
Recycling of photovoltaic modules - legal status, technology, market prospects
PublikacjaThe increase in the number of manufactured and installed photovoltaic modules and the growing concern about the insufficient supply of pure silicon imply the need to take action to develop infrastructure for recycling PV modules. The article presents a multifaceted analysis of the current state of development of the photovoltaic module recycling sector from a global and national perspective. The essence of the issue was introduced...
-
CURRENT TRENDS IN RECYCLING OF PHOTOVOLTAIC SOLAR CELLS AND MODULES WASTE
PublikacjaIn comparison to other energy producing techniques, photovoltaics (PV) is one of the most promising options: no emission of any matter into the environment during operation; extremely long operation period (estimated average: 25 years), minimum maintenance, robust technique, aesthetic aspects. The use of photovoltaics is rapidly increasing, and the respective market is developing accordingly. Although PV manufacturing equipment...
-
Recycling of Photovoltaic Solar Cells and Modules - Te State - Of - Art
PublikacjaIn comparison to other energy producing techniques, photovoltaics (PV) is one of the most promising options: no emission of any matter into the environment during operation; extremely long operation period (estimated average: 25 years), minimum maintenance, robust technique, aesthetic aspects. The use of photovoltaics is rapidly increasing, and the respective market is developing accordingly. Although PV manufacturing equipment...
-
Recycling and Reuse Treatment Technologies for Photovoltaic Cells and Modules - a Review
PublikacjaŚredni czas życia modułów fotowoltaicznych wynosi obecnie ponad 25 lat. Dla Europy oczekuje się rozpoczęcia okresu końca życia modułów montowanych na skalę masową w 2040 r. - szacuje się wzrost odpadów pochodzących z modułów PV do 33 500 ton. Zagospodarowanie wycofanych z użytku elementów systemów PV może stać się problemem w związku z ciągle rosnącą produkcją modułów fotowoltaicznych. Mogą i powinny być one poddane recyklingowi,...
-
The Analysis of Working Parameters Decrease in Photovoltaic Modules as a Result of Dust Deposition
PublikacjaThe aspect of dust accumulation on the surface of photovoltaic (PV) modules should be thoroughly understood in order to minimize possible obstacles affecting energy generation. Several elements affect the amount of pollutant gathered on the surface of a solar device, mainly its localization, which is irreversibly linked to factors such as annual rainfall, occasional snow coverage, or, in a dry climate, increased blow of dust during...
-
Multifaceted Analyses of Four Different Prototype Lightweight Photovoltaic Modules of Novel Structure
PublikacjaDynamic growth of photovoltaic capacity in Poland encourages many entities to invest in photovoltaic systems. However, in the case of buildings with low roof-bearing capacity it can be problematic or even impossible to mount conventional PV modules due to their relatively high weight. Hence, the use of lightweight PV modules is a potential solution. In this paper four different prototype silicon lightweight modules of novel structure...
-
Shading, Dusting and Incorrect Positioning of Photovoltaic Modules as Important Factors in Performance Reduction
PublikacjaThe amount of solar radiation reaching the front cover of a photovoltaic module is crucial for its performance. A number of factors must be taken into account at the design stage of the solar installation, which will ensure maximum utilization of the potential arising from the location. During the operation of a photovoltaic installation, it is necessary to limit the shading of the modules caused by both dust and shadowing by trees...
-
The Possibility of Phase Change Materials (PCM) Usage to Increase Efficiency of the Photovoltaic Modules
PublikacjaSolar energy is widely available, free and inexhaustible. Furthermore this source of energy is the most friendly to the environment. For direct conversion of solar energy into useful forms like of electricity and thermal energy, respectively photovoltaic cells and solar collectors are being used. Forecast indicate that the first one solution will soon have a significant part in meeting the global energy demand. Therefore it is...
-
Chemical, thermal and laser processes in recycling of photovoltaic silicon solar cells and modules
PublikacjaIn recent years, photovoltaic power generation systems have been gaining unprecedented attention as an environmentally beneficial method to solve the energy problem. From the economic point of view the pure silicon, which can be recapture from the used cells, is the most important material due to its cost and shortage. In the paper selected methods of used or damaged module and cells recycling and experimental results are presented....
-
Photovoltaic solar cells and modules as the source of electricity in the world and its future in Poland
PublikacjaJedną z metod ograniczenia emisji CO2 na świecie i w Polsce jest zastępowanie paliw kopalnych odnawialnymi źródłami energii. Systemy fotowoltaiczne, generujące energie elektryczną, są uważane za technologię wpisująca się w politykę zrównoważonego rozwoju dzięki znacznemu postępowi technologicznemu w zakresie ich wytwarzania i znacznej redukcji kosztów tych systemów.W artykule naświetlono postęp, jaki dokonał się w tej dziedzinie...
-
Recycling of raw materials, silicon wafers and complete solar cells from photovoltaic modules
PublikacjaPhotovoltaic modules (PVs) are an attractive way of generating electricity in reliable and maintenance-free systems with the use of solar energy. The average lifetime of photovoltaic modules is 25 to 30 years. To offset the negative impact of photovoltaic modules on the environment, it is necessary to introduce a long-term strategy that includes a complete lifecycle of all system components from the production phase through installation...
-
Prototype design and development of low-load-roof photovoltaic modules for applications in on-grid systems
PublikacjaFour prototypes of lightweight photovoltaic modules for applications in on-grid systems have been designed, developed, manufactured and tested for compliance with relevant IEC standards. Selected, commercially available materials characterized by thermogravimetry, differential scanning calorimetry, dilatometry, scanning electron microscopy and nanoindentation technique were used in frameless, adhesively-bonded sandwich-structures...
-
Chemical treatment of crystalline silicon solar cells as a method of recovering pure silicon from photovoltaic modules
PublikacjaProducenci modułów PV stosują ogniwa krzemowe, wyprodukowane w różnej technologii, w efekcie czego różnią się one między sobą. Różnorodność dotyczy zarówno modułów PV, wykonanych z ogniw polikrystalicznych jak i monokrystalicznych. Różnice widoczne są zwłaszcza dla kontaktów elektrycznych. Producenci ogniw wykonują metalizację z zastosowaniem past Al, Ag lub przy jednoczesnym użyciu Al/Ag. Proces recyklingu krzemowych ogniw PV...
-
The use of recycled semiconductor material in crystalline silicon photovoltaic modules production - A life cycle assessment of environmental impacts
PublikacjaTo offset the negative impact of photovoltaic modules on the environment, it is necessary to introduce a longterm strategy that includes a complete lifecycle assessment of all system components from the production phase through installation and operation to disposal. Recycling of waste products and worn-out systems is an important element of this strategy. As the conclusions from the previous studies have shown, thermal treatment...
-
Ewa Klugmann-Radziemska prof. dr hab.
OsobyEwa Klugmann-Radziemska ukończyła studia wyższe na kierunku fizyka na Uniwersytecie Gdańskim, a od roku 1996 związana jest z Politechniką Gdańską, kiedy to rozpoczęła studia doktoranckie. Obecnie jest profesorem na Wydziale Chemicznym Politechniki Gdańskiej, od roku 2006 kierownikiem Katedry Aparatury i Maszynoznawstwa Chemicznego. W latach 2008–2016 pełniła funkcję Prodziekana ds. współpracy i rozwoju, w latach 2016-2019 była...
-
Kluczowe zagadnienia procesu recyklingu zużytych modułów fotowoltaicznych I i II generacji
PublikacjaW ramach technologii fotowoltaicznych wyróżniamy obecnie trzy generacje ogniw fotowoltaicznych. Pierwsza z nich to ogniwa z mono- i polikrystalicznego krzemu (c-Si), druga obejmuje ogniwa wykonane na bazie technologii cienkowarstwowej, zarówno z krzemu amorficznego (a-Si) jak i diseleneku indowo-miedziowo-galowego (CIGS), tellurku kadmu (CdTe) oraz arsenku galu (GaAs). Trzecia generacja to najnowsze technologie, takie jak: organiczne...
-
The Environmental Benefits of Photovoltaic Systems: The Impact on the Environment in the Production of Photovoltaic Systems: With a Focus on Metal Recovery
PublikacjaGreenhouse gases (GHGs) such as carbon dioxide, nitrous oxide and methane, trap heat and energy, thus preventing solar radiation from escaping back into space. As the quantity of greenhouse gases in the atmosphere increases so does the trapped heat and corresponding global temperature. As a result, storms become more violent, droughts more prevalent, glaciers melt, and sea levels rise, to name but a few effects of a rapidly changing...
-
An interactive system for remote modeling and design validation of hybrid photovoltaic systems
PublikacjaIn the paper a multi-functional demonstrator of the interactive system designed to modeling, monitoring and validation of hybrid photovoltaic systems assisted by fuel cells and thermoelectric generators is presented. The purpose of this paper is to report the system solution expressed in the form of a block diagram. Technical parameters of demonstrator components such as: silicon photovoltaic modules, fuel cells, thermoelectric...
-
Degradation of electrical performance of a crystalline photovoltaic module due to dust deposition in northern Poland
PublikacjaThe reduction in power output caused by the accumulation of dust on the photovoltaic module surface is an important problem and should receive much more attention in the literature. This study was an evaluation of the performance degradation of crystalline photovoltaic modules due to natural and simulated dust deposition. Dust is created from powdered grains of sand and particles of different bodies. Dust originates from different...
-
The Issue of Shading Photovoltaic Installation Caused by Dust Accumulation on the Glass Surface
PublikacjaThe issue of accumulation of dust and other pollutants on the surface of photovoltaic modules was thoroughly analysed over the years. One of the first surveys in this field of knowledge linked pollutant accumulation on the module surface with transmittance loss of its glass covering, which leads to lessened amount of solar radiation reaching solar cells. First stage of this accumulation process is linear transparency loss, and second...
-
Anna Kuczyńska-Łażewska dr inż.
OsobyAnna Kuczyńska-Łażewska ukończyła studia na Wydziale Chemicznym Politechniki Gdańskiej na kierunku Chemia (I st.) i Technologie Ochrony Środowiska, specjalizacja: systemy ochrony środowiska (II st.). W 2014 odbyła 3-miesięczny staż w Leibniz-Institut für Katalyse w Rostocku. Doktorat w tematyce recyklingu modułów I i II generacji obroniła w 2018 roku po opieką prof. dr hab. Ewy Klugmann-Radziemskiej w Katedrze Aparatury i Maszynoznawstwa...
-
POSSIBILITIES OF ELECTRICAL ENERGY GENERATION IN PHOTOVOLTAIC SYSTEMS INSTALLED IN CENTRAL EUROPE
PublikacjaNowadays, fossil fuels are the main sources of energy from which electricity is obtained. But these sources will not last forever, so in due course renewable energies will have to replace them in this role. One of these new sources is solar energy. To generate electricity from sunlight, solar (photovoltaic - PV) cells and modules are used. The increasing interest in PV cells and modules worldwide is due mainly to the fact that...
-
Alternative Energy: Photovoltaic Solar Cells
PublikacjaSolar radiation is a fuel for photovoltaic cells and modules, which are a source of electric energy. Viable solar technologies that have been developed in the past are starting to be adopted on a broader and more meaningful global scale across different sectors with ever-increasing market penetration. In this entry, a brief overview of the material properties relevant to solar cell operation, the structure of the solar cell, and electrical...
-
Decrease in Photovoltaic Module Efficiency Due to Deposition of Pollutants
PublikacjaThe deposition of pollutants on the surface of photovoltaic (PV) modules reduce the efficiency that can be achieved in given climatic conditions. This results in the loss of energy yield obtained from the solar installation. A number of factors determine the scale of this problem. The first of these is the amount of impurities deposited, the associated amount of precipitation, and the speed and direction of the wind. A second aspect...
-
Influence of Fragment Size on the Time and Temperature of Ethylene Vinyl Acetate Lamination Decomposition in the Photovoltaic Module Recycling Process
PublikacjaPhotovoltaics is a commercially available and reliable technology with significant potential for long-term growth in nearly all global regions. Several research institutes and companies are working on recycling concepts for thin film modules and modules with crystalline cells. The establishment of recycling and reuse technologies appropriate and applicable to all photovoltaics (PV) modules is a key issue to be addressed as part...
-
Chemical treatment of crystalline silicon solar cells as a main stage of pv modules recycling = Obróbka chemiczna krzemowych ogniw słonecznych jako najważniejszy etap w recyklingu modułów fotowoltaicznych
PublikacjaIn recent years, photovoltaic systems have gained worldwide recognition and popularity as a environmentally friendly way of solving energetic problems. However, a problem of utilizing worn out photovoltaic systems, amount of which will rapidly increase in the future, is yet to be solved. Establishing a technology of recycling and reusing obsolete photovoltaic panels is a necessity.Photovoltaic modules in crystalline silicon solar...
-
Heat recovery from the hybrid photovoltaic tile – experimental studies with the solar light simulator
PublikacjaConsidering the current development of micro-cogeneration energy sources, supported by the national prosumer policy and the act on the renewable energy sources, there is a great demand for the effective solar technologies. In this area, the photovoltaic cells with a combined conversion of the solar radiation energy into the electrical and thermal energy (PV/T cells) seem to be attractive. They are already widely available and treated...
-
An interactive system for remote modeling and design validation of hybrid photovoltaic systems
PublikacjaAbstract: A multi-functional demonstrator of the interactive system is presented. The demostrator enables modeling, monitoring and design validation of hybrid photovoltaic systems assisted by fuel cells and thermoelectric generators, as well as experimentation and scientific research. A block diagram of the system is presented and the selection of its components is discussed. Availability of the system via Ethernet or GSM...
-
AN INTELLIGENT SYSTEM TO SUPPORT THE DESIGN PROCESS OF HYBRID PHOTOVOLTAIC INSTALLATIONS
PublikacjaThe paper presents the final version of intelligent system to support the design process of hybrid photovoltaic systems supported by fuel cells and / or thermoelectric generators developed and constructed at the Institute of Electron Technology, as well as to conduct experiments and research. A block diagram of the system and the selection of its components is described and discussed. The paper considers the availability of the...
-
NEW SOLUTIONS FOR THE SOLAR CHARGE CONTROLLERS DESIGN FOR OBTAINING TRUE MPP IN PARTLY SHADED PV MODULES
PublikacjaSoft shading sources such as tree limbs, structural elements of buildings and chimneys, scatter and refract sunlight, significantly reducing the amount of radiation reaching the surface of the module. The hard shadings located directly on the surface (i.e. bird droppings, leaves, snow) tend to stop sunlight completely. These phenomena significantly affects the output characteristics of photovoltaic modules and often contribute...
-
Energy Yield Generated by a Small Building Integrated Photovoltaic Installation
PublikacjaIn the recent years photovoltaic (PV) industry has experienced a major growth, caused by the ever present annual decrease in module production prices and the expanding awareness of the general public in terms of renewable energy. There are numerous ways to implement PV modules as an additional energy source for a building, be it mounted on the rooftop, or building integrated (BIPV). An analysis of BIPV consisting of 8 modules with...
-
CLEANING METHODS FOR DUST DEPOSITED ON THE FRONT COVER OF PHOTOVOLTAIC MODULE
PublikacjaPhotovoltaic modules are one of the renewable energy sources with great potential for application in various regions of the world as well as for different terrain. They are, however, sensitive to external factors, affecting the overall amount of energy generated, such as solar irradiance, shading effects and any form of soil build-up on the front glass cover of solar device. The latter issue happens over a course of weeks, months...
-
ENVIRONMENTAL ASSESSMENT OF SOLAR CELL MATERIALS
PublikacjaIn today’s world, fossil fuels, including coal, oil, and gas, are the primary energy sources from which electricity is obtained. As they are exhaustible and their exploitation has a negative impact on the natural environment, they should be, at least partially, replaced by renewable energy sources. One of these sources is solar energy. The use of solar energy releases no CO2, SO2, or NO2 gases, and does not contribute to global...
-
Optimisation of cooperation of hybrid renewable energy sources with hydrogen energy storage toward the lowest net present cost
PublikacjaThe paper presents the results of a technical and economic analysis of the power supply for a model industrial facility based on intermittent renewable energy sources in the form of wind turbines and photovoltaic modules, supplemented with hydrogen energy storage. The adopted power supply strategy assumed the maximisation of self-consumption of self-produced electricity. Six variants were considered, including two with an energy...
-
Photovoltaic module temperature stabilization with the use of phase change materials
PublikacjaThe worldwide growth of photovoltaics (PVs) has formed an exponential curve for more than four decades. During this period of time, PVs have evolved from a pure niche market of small-scale applications towards becoming a mainstream electricity source. The influence of temperature on the electrical parameters of crystalline silicon solar cells and solar modules is well described in the literature. In order to diminish these effects,...
-
Recovery of silver metallization from damaged silicon cells
PublikacjaMetallization is one of the key process steps to fabricate solar cells with high performance in a cost-effective way. Majority of photovoltaic solar cell manufacturing uses thick film screen print metallization with Ag containing paste to produce solar cells. The average lifetime of PV modules can be expected to be more than 25 years. The disposal of PV systems will become a problem in view of the continually increasing production...
-
Koncepcja zdalnego sterowania i monitoringu urządzeń trakcyjnych z wykorzystaniem technologii teleinformatycznych
PublikacjaAdvancement in wireless communication enables engineers to apply sophisticated and relatively inexpensive technologies in new fields of industry, which were previously designated solely to wire-based solutions. One of those fields is railway transportation system. In effect of a high reliability and safety demands, this area was resistive to new technologies. Nowadays, increased security and reliability of wireless sensor networks...
-
AC-DC-DC Converter for Small Power Energy Storage Systems
PublikacjaThe energy transformation driven by the development of renewable energy sources has become a reality for all power grid users. Prosumer energy, primarily utilizing photovoltaic installations, is one of the fastest-growing market segments. The advancement of technology, a decrease in electrochemical energy storage prices, and changes in the legal framework governing energy billing for grid-fed power have led to a growing interest...
-
Cleaner energy for sustainable future using hybrid photovoltaics-thermoelectric generators system under non-static conditions using machine learning based control technique
PublikacjaIn addition to the load demand, the temperature difference between the hot and cold sides of the thermoelectric generator (TEG) module determines the output power for thermoelectric generator systems. Maximum power point tracking (MPPT) control is needed to track the optimal global power point as operating conditions change. The growing use of electricity and the decline in the use of fossil fuels have sparked interest in photovoltaic-TEG...
-
Optional modules
Kursy Online4 semestr specjalności ISI i ZAD
-
Oversizing the photovoltaic generator capacity in a micro photovoltaic plant
PublikacjaA significant part of photovoltaic micro installations in Poland is characterized by photovoltaic generator oversizing in relation to the inverter. The idea of oversizing, however, still raises doubts among some plant owners. In the paper, the energy yield of installation with an oversized and not oversized photovoltaic generator is presented on selected examples, showing the legitimacy of oversizing.
-
The effects of bifunctional linker and reflux time on the surface properties and photocatalytic activity of CdTe quantum dots decorated KTaO3 composite photocatalysts
PublikacjaNovel CdTe-KTaO3composite photocatalysts were successfully synthesized by using thioglycolic acid(TGA) or 3-mercaptopropionic acid (MPA) as linker molecules which facilitated attachment of CdTequantum dots to the surface of KTaO3nanocubes. The as-prepared photocatalysts were characterizedby UV–vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy...
-
Various types of semiconductor photocatalysts modified by CdTe QDs and Pt NPs for toluene photooxidation in the gas phase under visible light
PublikacjaA novel synthesis process was used to prepare TiO2 microspheres, TiO2 P-25, SrTiO3 and KTaO3 decorated by CdTe QDs and/or Pt NPs. The effect of semiconductor matrix, presence of CdTe QDs and/or Pt NPs on the semiconductor surface as well as deposition technique of Pt NPs (photodeposition or radiolysis) on the photocatalytic activity were investigated. The as-prepared samples were characterized by X-ray powder diffractometry (XRD),...