Search results for: ENERGY GENERATION
-
Recycling of photovoltaic modules - legal status, technology, market prospects
PublicationThe increase in the number of manufactured and installed photovoltaic modules and the growing concern about the insufficient supply of pure silicon imply the need to take action to develop infrastructure for recycling PV modules. The article presents a multifaceted analysis of the current state of development of the photovoltaic module recycling sector from a global and national perspective. The essence of the issue was introduced...
-
Recuperator with microjet technology as a proposal for heat recovery from low-temperature sources
PublicationA tendency to increase the importance of so called dispersed generation, based on the local energy sources and the working systems uti- lizing both the fossil fuels and the renewable energy resources is observed nowadays. Generation of electricity on industrial or domestic scale together with production of heat can be obtained for example through employment of the ORC systems. It is mentioned in the EU directive 2012/27/EU for...
-
Pretreatment of Lignocellulosic Materials as Substrates for Fermentation Processes
PublicationLignocellulosic biomass is an abundant and renewable resource that potentially contains large amounts of energy. It is an interesting alternative for fossil fuels, allowing the production of biofuels and other organic compounds. In this paper, a review devoted to the processing of lignocellulosic materials as substrates for fermentation processes is presented. The review focuses on physical, chemical, physicochemical, enzymatic,...
-
5G/6G optical fronthaul modeling: cost and energy consumption assessment
PublicationIn fifth generation (5G) and the future beyond 5G (6G) radio access networks (RANs), the cost of fronthaul deployment is a main challenge for mobile network operators. Depending on different constraints, there are various solutions to deploy an efficient fronthaul. Fiber-optic-based fronthaul offers long-term support with regard to a rapid increase in capacity demands. When fiber connections, either point-to-point (P2P) or point-to-multipoint...
-
Delivery of Ancillary Services in Distribution Power Systems
PublicationOne of the technical and organizational challenges the power system faces in deregulated market conditions is to organize an ancillary services market. The growing share of distributed generation of variable (intermittent) energy sources and a change in the market position of consumers, causes the demand for distributed delivery of ancillary services. For this purpose, it is sought to use the ability of the regulatory measures:...
-
Synthesis and characterization of modified silica gel as an intermediate in the generation of gaseous standard mixtures
Publication -
A New Approach to Generation of Standard Gas Mixtures used in the Calibration of Gas Analysers
Publication -
Shape-controllable synthesis of GdVO4 photocatalysts and their tunable properties in photocatalytic hydrogen generation
Publication -
Chaos in vibroimpact systems with one degree of freedom in a neighborhood of chatter generation: II
Publication -
Chaos in vibroimpact systems with one degree of freedom in a neighborhood of chatter generation: I
Publication -
Generation and stability of N-phenacyl-4-R-pyridinium ylides in silicon polypodands
Publication -
Generation of chirality in 4,4'-azopyridine by co-crystallization with optically active dicarboxylic acids
PublicationOtrzymano kokryształy anti-4,4'-azopirydyny z optycznie czynnymi kwasai: 9,10-dihydro-9,10-etanoantraceno-11,12-dikarboksylowym i trans-1,2-cykloheksnodikarboksylowym. Następnie pomierzono dichroizm kołowy otrzymanych kryształów. Dodatni znak efektu Cottona, odpowiadający niskoenergetycznemu wzbudzeniu elektronowemu n-pi*, został skorelowany z M helikalnością skręconego chromoforu Ar-N=N. Absolutna konfiguracja skręconej cząsteczki...
-
Effective rheological parameters of emulsion during their generation in the agitated draft - tube reactor
PublicationBadano właściwości reologiczne emulsji O/W i W/O w warunkach ich wytwarzania w pętlicowym reaktorze dwukolumnowym z mieszaniem w strefie wznoszenia. Obliczano lepkość pozorną emulsji, wykorzystując model potęgowy Ostwalda - de Waele, w którym szybkość ścinania obliczano jako stosunek prędkości pozornej dyspersji ciecz - ciecz w strefie opadania reaktora i szerokości strefy opadania. W celu identyfikacji typu emulsji mierzono przewodnictwo...
-
Effect of phosphorylation of the maize starch on thermal generation of stable and short-living radicals
Publication -
Surface texture generation during cylindrical milling in the aspect of cutting force variations
Publication -
Graphene oxide functionalized with methylene blue and its performance in singlet oxygen generation
Publication -
Enhancement of second harmonic generation in nanocrystalline SiC films based natural microcavities
Publication -
DETERMINANTS OF THE PROVISION OF MARITIME TRAVEL IN THE CONTEXT OF A SENSE OF SECURITY OF GENERATION Y REPRESENTATIVES
Publication -
Relationsship between magnetoriction and the magnetostrictive coupling coefficient for magnetostrctive generation of elastic waves
PublicationPrzedstawiono wyniki doświadczenia z wpływem natężenia stałego pola magnety-cznego na wielkość impulsów magnetostrykcyjnych w rurze stali niskowęglowej.fala akustyczna rejestrowana była także za pomocą układu do emisji akusty-cznej. Wykazano, iż występuje minimum amplitudy impulsów magnetostrykcyjnychoraz emisji akustycznej dla natężenia pola, przy którym magnetostrykcjaosiąga wartość ekstremalną. Wyniki zapisano za pomocą...
-
Optimal design and control tuning of the power generation interfaces using genetic algorithms
PublicationReferat przedstawia zastosowania algorytmów genetycznych do rozwiązywania klasycznych problemów w elektrotechnice. Zostały one zastosowane do optymalizacji parametrów regulatora VSC w celu zmniejszenia strat mocy i dostrajania tych parametrów w stanach przejściowych. Wyniki rozważań zostały potwierdzone za pomocą badań symulacyjnych.
-
Voltage and Current Unbalance Reduction in Power Networks with Distributed Generation and Electric Vehicles
PublicationThe current development of prosumer microsources and the expected spread of electric vehicles may cause the appearance of significant current and voltage unbalance in low-voltage (LV) networks. This unbalance, which is an unfavorable phenomenon, may occur when using single-phase photovoltaic (PV) microsources and single-phase home chargers for electric vehicles. This paper presents a proposal for the symmetrization of the LV network...
-
Electricity generation from rapeseed straw hydrolysates using microbial fuel cells
PublicationRapeseed straw is an attractive fuel material for microbial fuel cells (MFCs) due to its high content of carbohydrates (more than 60% carbohydrates). This study has demonstrated that reducing sugars can be efficiently extracted from raw rapeseed straw by combination of hydrothermal pretreatment and enzymatic hydrolysis followed by utilization as a fuel in two-chamber MFCs for electrical power generation. The most efficient method...
-
A simple approach to heat exchanger sizing optimisation by means of entrophy generation minimisation
PublicationIn the paper an attempt is presented to find the method of optimization of microtube diameter with respect to optimal thermal-hydraulic conditions in the single-phase shell-and-tube heat exchangers. The approach is based on consideration of pumping power at the condition of maximum heat transfer by the heat exchanger tube system. In the optimization method the tube diameter is first specified and then appropriate calculations are...
-
Advantageous conditions of saccharification of lignocellulosic biomass for biofuels generation via fermentation processes
PublicationProcessing of lignocellulosic biomass includes four major unit operations: pre-treatment, hydrolysis, fermentation and product purifcation prior to biofuel generation via anaerobic digestion. The microorganisms involved in the fermentation metabolize only simple molecules, i.e., monosugars which can be obtained by carrying out the degradation of complex polymers, the main component of lignocellulosic biomass. The object of this...
-
Influence of datasets decreased by applying reduction and generation methods on Digital Terrain Models
PublicationThe number of point clouds provided by LiDAR technology can be sometimes seen as a problem in development and further processing for given purposes (e.g. Digital Terrain Model (DTM) generation). Therefore, there is still a need to reduce the obtained big datasets. Reducing can be done, inter alia, by reducing the size of the set or by generating the set. This paper presents two variants of the reduction of point clouds in order...
-
Improving voltage levels in low-voltage networks with distributed generation – case study
PublicationThe use of distributed generation in low-voltage networks may cause the voltage variation in them, within the wide range. In unfavourable circumstances, the voltage may reach unacceptable values. The paper presents the effect of distributed generation on voltage levels in a selected low-voltage rural distribution network in Poland. An analysis of possible methods for improving voltage levels in this network is conducted. The most...
-
Cooperation of ORC installation with a gas boiler as a perspective co-generation system for households
PublicationThis paper reports tests of an innovative micro-CHP unit prototype, consisting of a traditional gas boiler and organic Rankine cycle (ORC), which incorporates original system components such as an axial vapour microturbine, evaporator and condenser. The system co-generates heat and electricity for a single household or a group of households. Electricity is only a by-product during production of heat. While testing the prototype,...
-
Accuracy, Memory and Speed Strategies in GPU-based Finite-Element Matrix-Generation
PublicationThis paper presents strategies on how to optimize GPU-based finite-element matrix-generation that occurs in the finite-element method (FEM) using higher order curvilinear elements. The goal of the optimization is to increase the speed of evaluation and assembly of large finite-element matrices on a single GPU (Graphics Processing Unit) while maintaining the accuracy of numerical integration at the desired level. For this reason,...
-
New Generation of Water lubricated Foil bearing - Numerical Models and Experimental Verification
PublicationIn the paper a new idea of foil water lubricated bearing and methodology of hydrodynamic characteristics calculations is presented. To assesses the theoretical characteristics of these bearings two different computer models were built. First is structural model coupled with fluid model. It takes into account: fluid flow in the deformed fluid gap, specific design of bearing support and friction in bearing support. The second is...
-
Autonomous Perception and Grasp Generation Based on Multiple 3D Sensors and Deep Learning
PublicationGrasping objects and manipulating them is the main way the robot interacts with its environment. However, for robots to operate in a dynamic environment, a system for determining the gripping position for objects in the scene is also required. For this purpose, neural networks segmenting the point cloud are usually applied. However, training such networks is very complex and their results are unsatisfactory. Therefore, we propose...
-
Numbers, Please: Power- and Voltage-Related Indices in Control of a Turbine-Generator Set
PublicationThis paper discusses the proper selection and interpretation of aggregated control performance indices values mirroring the quality of electrical energy generation by a turbine-generator set cooperating with a power system. Typically, a set of basic/classical and individual indices is used in energy engineering to ensure the mirroring feature and is related to voltage, frequency and active or reactive power deviations from their...
-
Performance of the AMOEBA Water Model in the Vicinity of QM Solutes: A Diagnosis Using Energy Decomposition Analysis
PublicationThe importance of incorporating solvent polarization effects into the modeling of solvation processes has been well-recognized, and therefore a new generation of hybrid quantum mechanics/molecular mechanics (QM/MM) approaches that accounts for this effect is desirable. We present a fully self-consistent, mutually polarizable QM/MM scheme using the AMOEBA force field, in which the total energy of the system is variationally minimized...
-
Pyrolysis of Waste Biomass: Technical and Process Achievements, and Future Development-A Review
PublicationPyrolysis has been applied in the human economy for many years, and it has become a significant alternative to the production of chemical compounds, including biofuels. The article fo-cuses mostly on recent achievements in the technical and processing aspects of pyrolysis. The aim of the review is to present the latest research on the process of waste biomass pyrolysis to fuel production. The paper describes the mechanisms of...
-
Application of multi-criteria methods to compare different solutions of supplying buildings in electricity from photovoltaic systems
PublicationNowadays, the technologies of electricity generation in distributed systems are usually associated with Renewable Energy Sources (RES). The choice of the construction site depends mainly on the availability of the power system. However, energy planning, especially in case of RES, is a complex process involving multiple and often conflicting objectives. The complexity of the selection of the electricity system is typically addressed...
-
Management Strategy for Seaports Aspiring to Green Logistical Goals of IMO: Technology and Policy Solutions
PublicationRecently, because of serious global challenges including the consumption of energy and climate change, there has been an increase in interest in the environmental effect of port operations and expansion. More interestingly, a strategic tendency in seaport advancement has been to manage the seaport system using a model which balances environmental volatility and economic development demands. An energy efficient management system...
-
Recuperator with microjet technology as a proposal for heat recovery from low-temperature sources
PublicationA tendency to increase the importance of so called dispersed generation, based on the local energy sources and the working systems utilizing both the fossil fuels and the renewable energy resources is observed nowadays. Generation of electricity on industrial or domestic scale together with production of heat can be obtained for example through employment of the ORC systems. It is mentioned in the EU directive 2012/27/EU for cogenerative...
-
PARAMETRIC ANALYSIS OF THE EFFICIENCY OF THE COMBINED GAS-STEAM TURBINE UNIT OF A HYBRID CYCLE FOR THE FPSO VESSEL
PublicationA thermal diagram of the combined gas‒steam turbine unit of a hybrid cycle, which is an energy complex consisting of a base gas turbine engine with a steam turbine heat recovery circuit and a steam-injected gas turbine operating with overexpansion, is proposed. A mathematical model of a power plant has been developed, taking into consideration the features of thermodynamic processes of simple, binary, and steam-injected...
-
Tracking Clonal Evolution of Multiple Myeloma Using Targeted Next-Generation DNA Sequencing
Publication -
Which Simulator to Choose for Next Generation Wireless Network Simulations? NS-3 or OMNeT++
Publication -
Synthesis of Bis(ethylenedithio)dithiadiazafulvalenes (BEDT-DTDAF) and Generation of Charge Transfer Complexes with Tetracyanoquinodimetane
PublicationW artykule opisana została synteza Bis(etylenoditio)ditiadiazafulwalenów (BEDT-DTDAF) wykorzystująca jako kluczowe związki przejściowe 4,5-(etylenoditio)tiazol oraz sole 3-aliklo-4,5-(etylenoditio)tiazoliowe oraz generowanie przewodzących kompleksów z przeniesieniem ładunku usyskanych z Bis(etylenoditio)ditiadiazafulwalenów oraz tetracyjanochinodimetanu.
-
Microneedle‐Based Generation of Microbubbles in Cancer Tumors to Improve Ultrasound‐Assisted Drug Delivery
Publication -
The 4th Generation of CeSFaMB in numerical simulations for CuO-based oxygen carrier in CLC system
Publication -
PANI/NaTaO3 composite photocatalyst for enhanced hydrogen generation under UV light irradiation
Publication -
SCRAMBLE’N’GAMBLE: a tool for fast and facile generation of random data for statistical evaluation of QSAR models
Publication -
Local anaesthetics upregulate nitric oxide generation in cord blood and adult human neutrophils
Publication -
Does source matter? Generation of investment expenditures by different types of local government revenues
PublicationThe purpose of the article was to investigate the impact of the three fundamental statutory categories of budget revenues, i.e. own revenues, general subsidies and specific grants on the size of investments made by local government units in Poland. The subject scope included the local government subsector in its entirety, as well as divided into 4 groups: communes (gminas), cities with powiat rights, districts (powiats) and province...
-
Reduction of measurement data before Digital Terrain Model generation vs. DTM generalisation
PublicationModern data acquisition technologies provide large datasets that are not always necessary in its entirety to properly accomplish the goal of the study. In addition, such datasets are often cumbersome for rational processing, and their processing is time and labour consuming. Therefore, methods that enable to reduce the size of the measurement dataset, such as the generalization of the Digital Terrain Model (DTM) or the reduction...
-
Multiple output second-generation current conveyor utilizing high frequency output stage
PublicationIn this paper a multiple output second-generation current conveyor (MOCCII) is presented. The main advantage of the proposed general circuit architecture over a typical structure, well known in the literature, is the use of a high passband multiple output current mplifier block instead of cascaded current mirrors. It gives similar frequency responses for all the outputs of the current conveyor and also maintains simplicity of the...
-
Partition of friction heat between sliding semispaces due to adhesion-deformational heat generation
PublicationAnalytical expressions of heat-partition coefficient and contact temperatures for two sliding semispaces with account for adhesion-deformational heat generation and contact heat exchange have been obtained. The rate of deformational heat generation is assumed to decay exponentially with increase of distance from the interface. It has been shown that heat-generation configuration and the intensity of contact heat exchange have impact...
-
What Potential Entrepreneurs from Generation Y and Z Lack-IEO and the Role of EE
PublicationThis paper addresses the issue of individual entrepreneurship orientation (IEO) and entrepreneurship education (EE), which are both important for modern economic development. Intergenerational differences in these areas were discussed, especially characteristics of Generations Y and Z. The results of research conducted among 757 Polish students showing their IEO are presented. 80% of respondents displayed high levels of proactivity...