displaying 1000 best results Help
Search results for: SILICON SINGLE CRYSTAL
-
Silicon microcantilever with impedance sensor
Open Research DataThe issue of microelectromechanical systems (MEMS) [1] has been enjoying popularity and interest since the 90s of the 20th century. Microcells are one of the simplest devices of this type, but they can be widely used in sensors. There are reports on the possibility of using this type of sensors in the context of such important issues as diagnostics...
-
Recycling of raw materials, silicon wafers and complete solar cells from photovoltaic modules
PublicationPhotovoltaic modules (PVs) are an attractive way of generating electricity in reliable and maintenance-free systems with the use of solar energy. The average lifetime of photovoltaic modules is 25 to 30 years. To offset the negative impact of photovoltaic modules on the environment, it is necessary to introduce a long-term strategy that includes a complete lifecycle of all system components from the production phase through installation...
-
Structure and electrochemical reactivity of new sulphur–silicon podands adsorbed on silver or gold surfaces
Publication -
Determination of Complex Permeability of Silicon Steel for Use in High-Frequency Modeling of Power Transformers
Publication -
Influence of free carbon on the Young's modulus and hardness of polymer‐derived silicon oxycarbide glasses
Publication -
Electrochemical study of lithium insertion into carbon-rich polymer-derived silicon carbonitride ceramics
PublicationW pracy przedstawiono materiał ceramiczny, bogaty w węgiel krzemo azotek węgla (SiCN), otrzymany na drodze pirolizy w zakresie temperatur od 1100 do 1700°C. Badania elektrochemiczne insercji litu wykazały, że materiał elektrodowy na bazie SiCN może być obiecujący jako anoda w bateriach litowych. Próbka otrzymana w 1300°C cechuje się pojemnością 392 mAh/g i jest stabilna aktywna elektrochemicznie w trakcie interkalacji i deinterkalacji...
-
Re-use of photovotaic [i.e. photovoltaic] crystalline silicon solar cells - technological possibilities
PublicationSystemy fotowoltaiczne są stosowane na całym świecie jako niezawodne i wydajne układy zasilania dla zastosowań przemysłowych, komunalnych i komercyjnych. Średni czas eksploatacji modułów fotowoltaicznych wynosi ponad 25 lat. Wyeksploatowane moduły oraz te, które uległy uszkodzeniu, są obecnie przeważnie składowane na wysypiskach jako odpady przemysłowe lub komunalne, np. jako szkło lub materiał rozbiórkowy, co było dopuszczalne...
-
Modeling of effect of plastic deformation on Barkhausen noise and magnetoacoustic emission in iron with 2% silicon
PublicationW modelowaniu zaadaptowano model Alessandro-Beatrice-Bertotti-Montorsi dla opisu ruchu granic nie-180 stopniowych oraz model Jiles-Atherton dla opisu wpływu plastycznej deformacji na natężenie efektu Barkhausena oraz emisji magnetoakustcznej.
-
On the formation process of silicon carbide nanophases via hydrogenated thermally induced templated synthesis
Publication -
1/f noise as a diagnostic tool for non-destructive testing of silicon solar cells
PublicationPrzeprowadzono badania eksperymentalne charakterystyk statycznych i szumowych krzemowych ogniw słonecznych. Wyniki wykazują możliwość wykorzystania szumu 1/f jako narzędzia diagnostycznego w testach nieniszczacych tych przyrzadów.
-
Concentration-Dependent Fluorescence Properties of Rhodamine 6G in Titanium Dioxide and Silicon Dioxide Nanolayers
PublicationWytworzono cienkie warstwy zawierające rodaminę 6G w dwutlenku tytanu (R6G/TiO2) i w dwutlenku krzemu (R6G/SiO2) stosując metodę zol-żel. Badane były dwa rodzaje matryc, w których domieszkowano barwnik rodamina 6G (R6G) o różnych koncentracjach. Został stwierdzony istotny wpływ koncentracji barwnika na widma absorpcji i emisji oraz na czasowo rozdzielone widma fluorescencji. W szczególności stwierdzono znacznie mniejszą zdolność...
-
A FPTAS for minimizing total completion time in a single machine time-dependent scheduling problem
PublicationIn this paper a single machine time-dependent scheduling problem with total completion time criterion is considered. There are given n jobs J1,…,Jn and the processing time pi of the ith job is given by pi=a+bisi, where si is the starting time of the ith job (i=1,…,n),bi is its deterioration rate and a is the common base processing time. If all jobs have deterioration rates different and not smaller than a certain constant u>0,...
-
Equivalent Single Layer Models in Free Vibration Analysis of Laminated Multi-Layered Plates
PublicationThe performance of selected equivalent single-layer (ESL) models is evaluated within several classical benchmark tests for small amplitude free vibration analysis of multi-layered plates. The authors elaborated their own Finite Element software based on the first-order shear deformation (FOSD) theory with some modifications incorporated including a correction of the transverse shear stiffness and an application of zigzag type functions....
-
Single stillbirth - Female, 42 - Tissue image [12010630011261881]
Open Research DataThis is the histopathological image of PLACENTA tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Single stillbirth - Female, 42 - Tissue image [12010630011261731]
Open Research DataThis is the histopathological image of PLACENTA tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Cisplatin functionalized single‐walled carbon nanotubes
Publication -
Purification and fractionation of single-walled carbon nanotubes
Publication -
Single‐walled carbon nanotubes as nanotest tubes
Publication -
Single-Mode Quadruple-Core Optical Fibres
Publication -
The idea of a robotic single-sided lapping system
PublicationThis paper reviews the idea of a robotic lapping system. Robot’s assistance automates the lap-ping process and supports the development of a flexible lapping system. However, the main aim behind the idea of a robotic lapping system is to provide improved means for controlling the posi-tion of conditioning rings on a lapping plate. Due to the kinematics of lapping process, the profile wear of the tool is not constant along the radius....
-
Safety of Single-Channel Railway Traffic Control
Publication -
Dynamics study on single and multiple β-sheets
Publication -
Production of trehalose in a single step enzymatic reaction
PublicationThe aim of this study was isolation and cloning of trehalose synthase gene derived from extremophilic microorganisms Deinoccoci to the expressive E. coli vectors and its biosythesis in different hosts.
-
Evolution of chemotaxis in single-cell artificial organisms
PublicationThe model of a liquid two-dimensional environment, which is based on physics of diffusion, allows us to simulate the diffusion of morphogenes. Artificial organisms move using a chemotaxis reacting to concentration difference. Organisms are controlled by a gene regulatory network coded in a linear genome and reproduce by division. We made a lot of experiments presenting organisms’ behaviour in various environment conditions. We...
-
Shaping of the workpiece surface in single-disc lapping
PublicationShape errors of the tool exert a dominant influence on the shape accuracy of the workpiece. The correlation between flatness errors of the lap and flatness errors of the workpieces was checked experimentally and determined analytically. Computer model of the workpiece shaping by lapping was developed. Evaluation method of the workpiece orientation as well as some simulation results for a lap with shape errors of convexity and cincavity...
-
Fidelity thresholds in single copy entanglement distillation
PublicationRozważono różne aspekty destylacji zaszumionego splątania oraz pewne stowarzyszone efekty w kwantowej korekcji błędów. W szczególności pokazano, że w przypadku gdy dozwolona jest komunikacja klasyczna w jedną stronę oraz współdzielony stan kwantowy dxd nie jest czysty, to istnieje próg dla optymalnego ułamka F stanu, który może być otrzymany w procesie destylacji na jednej kopii. Wynika z tego, że aby otrzymać (probabilistycznie)...
-
Growth and characterization of PrBa2Cu3O7-δ single crystals
Publication -
Analysis of single-ground-plane coplanar waveguide
PublicationW pracy przedstawion metodę analizy rodziny koplanarnych linii transmisyjnych z pojedynczym przewodem masy. Oryginalne, nie znane wcześniej wyniki modelowania numerycznego potwierdzone zostały dużą zgodnością z wynikami pomiarów wykonanych dla struktury falowodu koplanarnego z pojedynczym przewodem masy (SGP-CPW.
-
Shaping of the workpiece surface in single-disc lapping
PublicationPrzedstawiono korelację pomiędzy błędami kształtu docieraka i błędami kształtu przedmiotów obrabianych. Wyniki analityczne zostały sprawdzone doświadczalnie, co pozwoliło zbudować komputerowy model kształtowania powierzchni docieranych. Przedstawiono sposób wyznaczania intensywności kontaktu między przedmiotem docieranym, a docierakiem. Opracowano metodę wyznaczania położenia przedmiotu na docieraku.
-
Single chamber electrolyte supported SOFC module.
PublicationZaproponowano konstrukcję modułu składającego się z dwóch jednokomorowych ogniw paliwowych SOFC na nośnym elektrolicie. Moduł zbudowany jest z jednego substratu z tlenku ceru i domieszkowanym samarem oraz dwóch anod z cermetu na bazie tlenku niklu i dwóch katod z perovskitu LSCF. Przygotowano i zbadano moduły z różną powierzchnią elektrod, które były testowane w mieszaninach powietrza i propanu. Wielkość elektrod miała silny wpływ...
-
Formation of bubbles from a single nucleation site.
PublicationPrzedstawiono wyniki systematycznych badań eksperymentalnych wrzenia wody destylowanej i metanolu z pojedynczego, sztucznego centrum nukleacji. Jako centra nukleacji służyły otwory wywiercone na czołowej powierzchni miedzianego pręta. Średnice otworów wynosiły: 0.25 mm, 0.60 mm oraz 1.0 mm. Do pomiaru częstotliwości odrywania się pęcherzyków zastosowano układ laser diodowy-fotodioda. Sygnał z fotodiody był rejestrowany za...
-
Role of composite cathodes in single chamber SOFC.
PublicationZbadano wpływ składu katody na napięcie oraz wydajność ogniw paliwowych pracujących w konfiguracji jednokomorowej. W związku z tym, że takie ogniwo pracuje w mieszanienie powietrza i paliwa, napięcie jest określone przez różnice aktywności katalitycznej anody i katody. Typowy cermet na bazie niklu oraz związki perovskitów pracują dobrze odpowiednio jako anoda i katoda. Jednakże perowskity mają również właściwości katalityczne,...
-
Performance of a Porous Electrolyte in Single-Chamber SOFCs
PublicationW pracy przedstawiono wyniki badań ogniwa paliwowego SOFC zbudowanego na bazie domieszkowanego tlenku cyrkonu, cermetu niklowego oraz perovskitu. Elektrolit został przygotowany jako warstwa porowata o grubości 18um. Ogniwo było badane w konfiguracji jednokomorowej.
-
Crystal structure and physical properties of a novel ternary compound La15Mo Ge9
Publication -
High pressure and time resolved luminescence spectra of Gd3Ga5O12:Pr3+ crystal
Publication -
Influence of high hydrostatic pressure on Eu2+-luminescence in KMgF3:Eu2+ crystal
Publication -
Conformation-family Monte Carlo: A new method for crystal structure prediction
Publication -
Analysis of experimental and simulated vibrational spectra for the antiferroelectric liquid crystal 12OBBB1M6
Publication -
PbGa2GeS6 crystal as a novel nonlinear optical material: Band structure aspects
Publication -
Soliton trapping and orthogonal Raman scattering in a birefringent photonic crystal fiber
Publication -
Heat transfer and fluid flow visualization using liquid crystal thermography
PublicationW pracy przedstawiono możliwości wykrzystania termografii ciekłokrystalicznej do badań wymiany ciepła oraz wizualizacji pola przepływu w elementach urządzeń przemysłowych.
-
The use of liquid crystal thermography for heat, fluid flow and biomedical research.
PublicationW ostatniej dekadzie termografia ciekłokrystaliczna (TLC) i cyfrowa analiza kolorowych obrazów była z powodzeniem stosowana w różnych aplikacjach technicznych, przemysłowych i biomedycznych. Cienkie warstwy ciekłokrystaliczne zastosowano dla uzyskania lokalnych pól temperatury, współczynników przekazywania ciepła i określenia rodzaju procesu. Materiał ciekłokrystaliczny można również zastosować do wizualizacji pól temperatury i...
-
Hydrazinolysis Products of Selected Sugar Lactones—Crystal Structure and Microbiological Activity
PublicationCommercially available lactones, as well as those synthesized by us, turned out to be good substrates for the synthesis of sugar hydrazides. The exception was L-ascorbic acid, whose hydrazinolysis led to the formation of a hydrazinium salt, not the hydrazide as expected. The structure of all compounds was confirmed by NMR and X-ray analyses. The lower durability of hydrazinium L-ascorbate was additionally confirmed by thermogravimetric...
-
Improved liquid crystal thermography by use true-colour imageprocessing technology
PublicationRozdział zawiera opis zastosowania termochromatycznych ciekłych kryształóworaz komputerowej analizy kolorowych obrazów w badanich wymiany ciepła. Au-torzy przedstawili wykorzystanie techniki ciekłokrystalicznej w badaniachgeometrii klasycznych wymienników ciepła.
-
Magnetic properties of α-KCoPO4 compound with a chiral polar crystal structure
PublicationWe have obtained polycrystalline samples of a metastable α variant of KCoPO4 by low temperature (350–400 °C) solid state metathesis reaction of potassium oxalate and ammonium cobalt orthophosphate. The material crystallizes in a polar chiral structure (sg. P63, no. 173). Measurements of magnetic properties reveal antiferromagnetic interactions and no ordering observed down to T = 1.9 K, well below the Weiss temperature |Θcw| =...
-
Dehydration converts DsbG crystal diffraction from low to high resolution
PublicationDiffraction quality crystals are essential for crystallographic studies of protein structure, and the production of poorly diffracting crystals is often regarded as a dead end in the process. Here we show a dramatic improvement of poorly diffracting DsbG crystals allowing high-resolution diffraction data measurement. Before dehydration, the crystals are fragile and the diffraction pattern is streaky, extending to 10 Å resolution....
-
Properties of water in the region between a tubulin dimer and a single motor head of kinesin
PublicationA kinesin is a molecular motor that can perform movement on a microtubule track in a stepping-like manner. This motion is connected with processes of association and dissociation of kinesin and tubulin. Water is an important participant in these kinds of molecular interactions. This is why we have decided to investigate the dynamical and structural properties of water in the region between the kinesin catalytic domain and the tubulin...
-
Electrical and noise responses of Graphene-Silicon Schottky diodes decorated with Au nanoparticles for light-enhanced sensing of organic gases
Open Research DataGraphene-Silicon Schottky junctions decorated with Au nanoparticles were used for light-enhanced detection of organic tetrahydrofuran and chloroform. Au nanoparticles exhibited localized surface plasmon resonance (LSPR) in the range of yellow light; thus yellow LED (wavelength of 592 nm) was utilized to induce the plasmonic effect, that increased the...
-
Single-Slope ADC With Embedded Convolution Filter for Global-Shutter CMOS Image Sensors
PublicationThis brief presents an analog-to-digital converter (ADC) suitable for acquisition and processing of images in the global-shutter mode at the pixel level. The ADC consists of an analog comparator, a multi-directional shift register for the comparator states, and a 16-bit reversible binary counter with programmable step size. It works in the traditional single-slope mode. The novelty is that during each step of the reference ramp,...
-
Process zone in the Single Cantilever Beam under transverse loading. - Part I: Theoretical analysis
PublicationSingle Cantilever Beam (SCB) specimen loaded with a transverse force parallel to the crack front is proposed for the analysis of crack propagation phenomena under mixed mode conditions. The stress redistribution in the adhesive layer in the vicinity of the crack front so as the beam deformation are estimated using a Timoshenko beam on elastic foundation model. This model emphasizes the Mode II contribution due to flexural beam...