Search
Search results for: space industry
-
Management in space industry WiMiO
e-Learning Courses -
Creating Polish space language dictionary - lessons learned
PublicationPolish space industry suffers from lack of space vocabulary. Since joining European Space Agency in 2012, the sector has expanded rapidly now employing over 1000 specialists focusing mainly on space sustainability, space debris detection and tracking, robotics and propulsion systems. The Polish Space Agency together with The Polish Committee for Standardization have committed to creating the first lexicon of space language, along...
-
Building Polish space sector – from small islands of excellence to a national innovation ecosystem
PublicationIn the paper a national potential of Poland to build its space industry after joining the European Space Agency (ESA) in 2012 is assessed, based on the series of survey reports published annually by POLSA since 2016. Their methodology was based on the ESA technology tree, classifying all the space-related technical knowhow and allowed identification of the most promising strengths to exploit and shortages to challenge by policymakers...
-
Introducing concurrent engineering to space and satellite technology undergraduate course
PublicationIn recent decade concurrent engineering has become a de facto leading methodology of work in space, aeronautics and sometimes even automotive industry. It has been used in designing ESA space missions for 20 years now, with rst Concurrent Design Facility (CDF) built in ESTEC in 1998. Still, it has not become a universal standard in engineering, and universities are specically reluctant to adopt it into their curricula. As a result,...
-
“Space & Satellite Technologies" intercollegiate master-degree courses of study in Tri-City (Poland)
PublicationSince summer semester of the academic year 2016/2017, two faculties of Gdansk University of Technology GUT (Faculty of Mechanical Engineering and Faculty of Electronics, Telecommunications and Informatics) together with the Gdynia Maritime University (Faculty of Electronics) and the Polish Naval Academy in Gdynia (Faculty of Command and Naval Operations) have opened intercollegiate master -...
-
Adam Dąbrowski dr inż.
PeopleAdam Dabrowski has obtained a PhD in mechanical engineering from Gdańsk University of Technology and MSc. degree in mechatronics from Technische Universität Hamburg. He has an industry experience in Institute of Aviation Engineering Design Center (Warsaw, Poland) and SICK AG (Hamburg, Germany). Additionally, as an assistant at Gdansk University of Technology he teaught courses on mechanics, space mechanisms and dynamics of space...
-
Governmental supported space internship programmes in new ESA member states - Polish perspective
PublicationOver last 10 years ve new countries - Czech Republic, Romania, Poland, Hungary and Estonia - have joined the European Space Agency. These countries are currently experiencing a considerable increase of space activities aiming to take part in the European and Global space market. New companies, start-ups and consortiums have been created alongside oces of foreign entities have opened their premises in these countries. All of them...
-
Krzysztof Goczyła prof. dr hab. inż.
PeopleKrzysztof Goczyła, full professor of Gdańsk University of Technology, computer scientist, a specialist in software engineering, knowledge engineering and databases. He graduated from the Faculty of Electronics Technical University of Gdansk in 1976 with a degree in electronic engineering, specializing in automation. Since then he has been working at Gdańsk University of Technology. In 1982 he obtained a doctorate in computer science...
-
A note on the applications of artificial intelligence in the hospitality industry: preliminary results of a survey
PublicationIntelligent technologies are widely implemented in different areas of modern society but specific approaches should be applied in services. Basic relationships refer to supporting customers and people responsible for services offering for these customers. The aim of the paper is to analyze and evaluate the state-of-the art of artificial intelligence (AI) applications in the hospitality industry. Our findings show that the major...
-
Architects and urban planners in the face of energy transition - smart cities energy aspects in shaping building structures and cities
PublicationContemporary architects and urban planners are facing steadily increasing challenges. The growing problems around environmental issues, shrinking natural resources and climate action are just some of them. Currently, planning should also include balancing with all the aspects of sustainable development such as not only the environmental issues, but also social and economic ones. How to meet them in the era of energy transition...
-
The effect of laser on metal surfaces for multidisciplinary usage in material and thermal engineering
PublicationThe subject of heat transfer and cooling systems is still a matter of contention in many different fields of science and industry. Infrigidation is much more difficult than warming, and so, much more needed in more and more different devices, starting from massive industrial machinery and air conditioning in commercial buildings, up to micro and nano-surgery tools. In fact, the size of many cooling systems is still a problem. It...
-
Andrzej Chybicki dr inż.
PeopleA graduate of the Faculty of Electronics, Telecommunications and Informatics at the Gdańsk University of Technology, PhD in technical sciences in the field of IT specializing in distributed data processing in IT . Aimed at exploiting the achievements and knowledge in the field of industrial research. He cooperated with a number of companies including OpeGieka Elbląg, Reson Inc., Powel Sp. z o. o., Wasat, Better Solutions, the European...
-
Evolution of Edges and Porosity of Urban Blue Spaces: A Case Study of Gdańsk
PublicationCurrent waterfront studies focus mainly on a land-based perspective, failing to include the water side. Water is, however, not just a resource for port and industrial purposes and an edge to the waterfront; it is also a feature of the waterfront and the complex relation between water and city. Thus, the article suggests that water-land edges need to be re-contextualised, taking into consideration also their shape, functionality,...
-
Technological solutions for boosting hydrogen role in decarbonization strategies and net-zero goals of world shipping: Challenges and perspectives
PublicationFacing the problems concerning greenhouse gas (GHG) emissions from international ocean shipping has meant that the latest regulations of the International Maritime Organization, issued on 1st January 2023, have come into force, with the aim of reducing GHG emissions from maritime activities. Hydrogen has been suggested as an alternative fuel to achieve decarbonization ambitions in the near future. Although hydrogen has been investigated...
-
A Simplified SVPWM Technique for Five-leg Inverter with Dual Three-phase Output
PublicationThis article proposes a simplified space vector pulse-width modulation (SVPWM) technique five-leg inverter with dual three-phase output. An idea to fed the dual tree-phase machine by the multiphase voltage source inverters (VSIs) is not new. Dual- and multi-motor drive systems are widely used in the industry applications. The most popular fields are: electric vehicles (EVs) and traction systems. Moreover, the specific characteristic...
-
Critical systems software testing and QA - Spring'24
e-Learning CoursesCourse objectives: Present software development standards in the European space industry and techniques of their implementation. Learn how to assess and manage critical system software quality in an IT project. Gain basic hands-on experience in bug tracking and reporting in a software project.
-
Elective Project II: COWORKING SPACE - CREATIVE CONTEST FOR ARCHITECTS AND DESIGNERS
e-Learning CoursesAs part of the elective seminar, students working in groups of 3will prepare architectural and lighting concept for aninternational competition: "COWORKING SPACE” – a place forpeople who appreciate working in a creative atmosphere.The competition is organized by the Polish Association ofLighting Industry in cooperation with the Agencja SOMA – theorganizer of the International Trade Show Light, and the Silesianstudios: Goczołowie...
-
On Unsupervised Artificial-Intelligence-Assisted Design of Antennas for High-Performance Planar Devices
PublicationDesign of modern antenna structures is a challenging endeavor. It is laborious, and heavily reliant on engineering insight and experience, especially at the initial stages oriented towards the devel-opment of a suitable antenna architecture. Due to its interactive nature and hands-on procedures (mainly parametric studies) for validating suitability of particular geometric setups, typical antenna development requires many weeks...
-
Designing digital displays and interactive media in today’s cities by night. Do we know enough about attracting attention to do so?
PublicationWith the huge transformation in the development of digital screen technology and its consistently decreasing cost, digital billboards are progressively replacing traditional static, two-dimensional poster advertisements in our cities1. Previously, due to the substantial expenditure involved, they were only available to major international brands with vast promotional resources to build their brand fame. Today, however, they are...
-
Modeling an Industrial Revolution: How to Manage Large-Scale, Complex IoT Ecosystems?
PublicationAdvancements around the modern digital industry gave birth to a number of closely interrelated concepts: in the age of the Internet of Things (IoT), System of Systems (SoS), Cyber-Physical Systems (CPS), Digital Twins and the fourth industrial revolution, everything revolves around the issue of designing well-understood, sound and secure complex systems while providing maximum flexibility, autonomy and dynamics. The aim of the...
-
Recent Advances in Accelerated Multi-Objective Design of High-Frequency Structures using Knowledge-Based Constrained Modeling Approach
PublicationDesign automation, including reliable optimization of engineering systems, is of paramount importance for both academia and industry. This includes the design of high-frequency structures (antennas, microwave circuits, integrated photonic components), where the appropriate adjustment of geometry and material parameters is crucial to meet stringent performance requirements dictated by practical applications. Realistic design has...
-
Barcelona - from the province to Metropolis.The cogent strategy of branding the city
PublicationThe phenomenon of rebranding Barcelona's image, called the Barcelona effect or 'Barcelona Model', is exampled as one of the most spectacular transformations of the city perception in the last decade. Why has Barcelona been successful? Is it the effect of the recently intensified revitalization practice, or has the city of Barcelona built its brand market value for years? The aim of the research is to name these transition...
-
POM/EVA Blends with Future Utility in Fused Deposition Modeling
PublicationPolyoxymethylene (POM) is one of the most popular thermoplastic polymers used in the industry. Therefore, the interest in its potential applications in rapid prototyping is understandable. Nevertheless, its low dimensional stability causes the warping of 3D prints, limiting its applications. This research aimed to evaluate the effects of POM modification with ethylene-vinyl acetate (EVA) (2.5, 5.0, and 7.5 wt.%) on its processing...
-
Potential of Polish R&D industry in the context of prototyping, design, development and control of a dedicated national satellite SAR system for marine ecosystem monitoring. Technical paper - preliminary study
Publicationpace technology is currently one of the most important elements in the advance of information societies and knowledge-based economies all over the world. The European Space Agency (ESA) is in the focal point of European space activities, while the European Union provides strong financial support for the development of space technologies and applications in its flagship programs. In a domestic scope, the Polish Space Agency (POLSA)...
-
Eco-friendly modification of bitumen: The effects of rubber wastes and castor oil on the microstructure, processability and properties
PublicationThe bitumen industry in the European Union is facing several difficulties, including rising demand, unstable oil supply, rising prices for synthetic polymer modifiers, and a focus on lowering carbon footprint. Bitumen modification with crumb rubber (CR) is one of the most promising solution to these challenges. However, CR-modified bitumen have poor processability and low storage stability. To overcome these flaws we are introducing...
-
WPŁYW KOMUNIKACJI MARKETINGOWEJ NA KSZTAŁTOWANIE ARCHITEKTURY OBIEKTÓW SŁUŻBY ZDROWIA - THE EFFECT OF MARKETING COMMUNICATION ON SHAPING THE ARCHITECTURE OF HEALTHCARE FACILITIES
PublicationXX wiek wraz z rozwojem kultury masowej przyniósł gwałtowny wzrost znaczenia komunikacji marketingowej, która początkowo pełniła rolę głównie informacyjną, związaną z działaniami reklamowymi. Współcześnie można zauważyć zwiększone zainteresowanie specjalistów z dziedziny marketingu oddziaływaniem na człowieka poprzez przestrzeń, w której on przebywa. Podejmowanie działań marketingowych w ramach usług świadczonych przez jednostki...
-
Technological vs. Non-Technological Mindsets: Learning From Mistakes, and Organizational Change Adaptability to Remote Work
PublicationThe permanent implementation of the change in working methods, e.g., working in the virtual space, is problematic for some employees and, as a result, for management leaders. To explore this issue deeper, this study assumes that mindset type: technological vs. non-technological, may influence the organizational adaptability to change. Moreover, the key interest of this research is how non-technological mindsets...
-
FACES OF MODERNISM - URBAN PLANNING OF SOCIAL HOUSING ESTATES IN GDANSK AND HAMBURG-ALTONA
PublicationThe paper aims to compare the modernistic social housing estates built during the interwar period in the Free City of Gdansk and in Altona, the small neighbour of Hamburg. The comparison is based on the analysis of the factors, which significantly affected the decisions regarding spatial transformations and the development of both cities in that time. These factors include primarily: poor living conditions, resulting from the explosive...
-
Koncepcja zdalnego sterowania i monitoringu urządzeń trakcyjnych z wykorzystaniem technologii teleinformatycznych
PublicationAdvancement in wireless communication enables engineers to apply sophisticated and relatively inexpensive technologies in new fields of industry, which were previously designated solely to wire-based solutions. One of those fields is railway transportation system. In effect of a high reliability and safety demands, this area was resistive to new technologies. Nowadays, increased security and reliability of wireless sensor networks...
-
Assessing Industry 4.0 Features Using SWOT Analysis
PublicationThis paper assesses some features of industry 4.0 by using SWOT analysis that affects the adoption and implementation of industry 4.0. The paper identifies the strengths, weaknesses, opportunities, and threats related to industry 4.0. By the consideration of these four groups of factors, the industrial practitioners can understand how to implement industry 4.0. Moreover, industrial practitioners can use the strengths/opportunities...
-
Fawad Ahmed PhD Scholar
PeopleI am Ph.D. Scholar in Faculty of Mechanical Engineering at Gdansk University of Technology, Poland. My research focuses on improving the thermal management of batteries that are used in Electric Vehicles. I received my MS in Thermal Energy Engineering from the National University of Sciences and Technology, Pakistan. My MS thesis was related to the application of thermal energy storage systems for space heating. I tried to improve...
-
PRZEKSZTAŁCENIA FRONTU WODNEGO GDAŃSKA
PublicationW ramach publikacji przedstawiono główne tendencje współczesnych przemian frontu wodnego Gdańska. W szczególności omówiono zagadnienia zagospdoarowania obszarów zdegradowanych - poportowych i poprzemysłowych.
-
A sector-an industry? Definitional challenges in economic sciences
Publicationthe aim of our paper is to present definitional challenges that we as scholars and teachers face while attempting to relate to a sector and an industry terms in economic analyses and from strategic management perspective. we employ secondary research and analyse the state of the academic discourse and common usages of the above terms. we argue that for an economic statistician classifications should be consistent and highlight...
-
Arsalan Muhammad Soomar Doctoral Student
PeopleHi, I'm Arsalan Muhammad Soomar, an Electrical Engineer. I received my Master's and Bachelor's Degree in the field of Electrical Engineering from Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan. Currently enrolled as a Doctoral student at the Gdansk University of Technology, Gdansk, Poland. Also worked in Yellowlite. INC, Ohio as a Solar Design Engineer. HEADLINE Currently Enrolled as a Doctoral...
-
Industry 4.0 Implementation Challenges in Manufacturing Industries: an Interpretive Structural Modelling Approach
PublicationFor the last few years, the fourth industrial revolution, known as Industry 4.0, has been a hot topic among academics. Industry 4.0 literature involves researches presenting studies related to its different aspects including challenges, opportunities, implementation and adoption. However, a detailed study of challenges and barriers towards the Industry 4.0 implementation in manufacturing industries is missing. Hence, this paper...
-
The influence of the development of private air communication on the architecture and urban planning of the 21st century
PublicationIn the first part, the article describes the stages of the development of gyroplanes and the influence of wartime policy on the interest in light aircraft. Also presented are links and the possibilities of using gyroplanes in various sectors of the economy. The authors, based on source texts, present the current position of the aviation industry in the Polish economy and attempt to diagnose its development capabilities. As a result,...
-
Evaluating Industry 4.0 Implementation Challenges Using Interpretive Structural Modeling and Fuzzy Analytic Hierarchy Process
PublicationThe fourth industrial revolution known as Industry 4.0 is reshaping and evolving the way industries produce products and individuals live and work therefore, gaining massive attraction from academia, business and politics. The manufacturing industries are optimistic regarding the opportunities Industry 4.0 may offer such as, improved efficiency, productivity and customization. The present research contributes to the Industry 4.0...
-
Project-Based Collaborative Research and Training Roadmap for Manufacturing Based on Industry 4.0
PublicationThe importance of the economy being up to date with the latest developments, such as Industry 4.0, is more evident than ever before. Successful implementation of Industry 4.0 principles requires close cooperation of industry and state authorities with universities. A paradigm of such cooperation is described in this paper stemming from university partners with partly overlapping and partly complementary areas of expertise in manufacturing....
-
Polyethylene as a small vessel's building material
PublicationThe most common use of polyethylene we can notice nowadays are areas like water supply systems, gas industry (esp. gas piping), food industry, small-scale, light and consumer goods industries. That material has far more applications. One of them is shipbuilding - especially small inland or offshore vessels.
-
Digitalization of Building Site Management in the Construction Industry
PublicationWith Industry 4.0, a digital transformation has started in the construction industry. However, 4.0 technologies have difficulties in the integration of digital systems due to the diversity and complexity of the processes in the construction industry. Multidisciplinary work in architectural projects and the need for high productivity require digital renovation planning in the construction industry. The application of the technologies...
-
Do mistakes acceptance foster innovation? Polish and US cross-country study of tacit knowledge sharing in IT
PublicationAbstract Purpose – This study aims to understand and compare how the mechanism of innovative processes in the information technology (IT) industry – the most innovative industry worldwide – is shaped in Poland and the USA in terms of tacit knowledge awareness and sharing driven by a culture of knowledge and learning, composed of a learning climate and mistake acceptance. Design/methodology/approach – Study samples were drawn from...
-
Virtual Engineering Factory: Creating Experience Base for Industry 4.0
PublicationABSTRACT In recent times, traditional manufacturing is upgrading and adopting Industry 4.0, which supports computerization of manufacturing by round-the-clock connection and communica- tion of engineering objects. Consequently, Decisional DNA- based knowledge representation of manufacturing objects, processes, and system is achieved by virtual engineering objects (VEO), virtual engineering processes (VEP), and virtual engineering...
-
Low and high energy explosive materials used in shale gas recovery
PublicationNowadays the explosives are widely used in many areas of life, including industry and mining. A wide range of explosive materials is used in the petroleum industry - from low to high explosives. Recently, as the unconventional oil and gas production became possible, explosives are also found to be used in perforators during the pre-completion stage of the fracturing process. This paper presents literature on theoretical and practical...
-
Prediction of Weld Deformations by Numerical Methods - Review
PublicationThe welding process is the basic technique of joining in the shipbuilding industry. This method generates welding distortions that cause a lot of problems during the manufacturing process due to both the time and cost of straightening as well as their influence on later stages of production. Proper preparation of welding processes plays a growing role in the shipbuilding industry and the development of calculating tools is being...
-
Proposition of the methodology for Data Acquisition, Analysis and Visualization in support of Industry 4.0
PublicationIndustry 4.0 offers a comprehensive, interlinked, and holistic approach to manufacturing. It connects physical with digital and allows for better collaboration and access across departments, partners, vendors, product, and people. Consequently, it involves complex designing of highly specialized state of the art technologies. Thus, companies face formidable challenges in the adoption of these new technologies....
-
Potential applications of by-products from the coffee industry in polymer technology – Current state and perspectives
PublicationCoffee is one of the most popular beverages in the world, and its popularity is continuously growing, which can be expressed by almost doubling production over the last three decades. Cultivation, processing, roasting, and brewing coffee are known for many years. These processes generate significant amounts of by-products since coffee bean stands for around 50% of the coffee cherry. Therefore, considering the current pro-ecological...
-
L'Italie. Gagner à tout prix. L'industrie de l'armenent italien pendant la Grande Guerre
PublicationThe chapter outlines the economic and technological transformations of the Italian armament industry during the First World War
-
An analysis of the characteristics of Indonesian industrial sectors: 2005-2010
PublicationThe purpose of the current study is to analyze the characteristics of Indonesian industrial sectors from 2005 through 2010. The study employs the analysis instruments from the Input-Output (IO) analysis, namely the indices of the power of dispersion, and the sensitivity of dispersion. For 2005 and 2010, the study focuses on nine and seventeen industries, respectively. The results show that industry 3, manufacturing, placed the...
-
An analysis of the characteristics of Indonesian industrial sectors: 2005-2010
PublicationThe purpose of the current study is to analyze the characteristics of Indonesian industrial sectors from 2005 through 2010. The study employs the analysis instruments from the Input-Output (IO) analysis, namely the indices of the power of dispersion, and the sensitivity of dispersion. For 2005 and 2010, the study focuses on nine and seventeen industries, respectively. The results show that industry 3, manufacturing, placed the...
-
Relacje międzyorganizacyjne w dobie Industry 4.0
PublicationStrukturę opracowania zbudowano w odniesieniu do zagadnienia relacji międzyorganizacyjnych. Omawianą kwestię osadzono w obecnych realiach Industry 4.0. Celem monografii jest omówienie roli Industry 4.0 w budowaniu i rozwoju relacji międzyorganizacyjnych oraz w kształtowaniu ich specyfiki. W pięciu rozdziałach przedstawiono aspekty „sieciowego” powiązania różnych podmiotów i jednostek na gruncie teorii zarządzania. Opracowanie otwiera...