Filters
total: 884
Search results for: SUSTAINABLE REFURBISHMENT
-
The influence of process parameters on photocatalytic hydrogen production
Publication -
Production of hydrogen from biomass and its separation using membranetechnology
PublicationHydrogen is an important raw material for chemical industry and feasible renewable energy carrier that could replace fossil fuels. However, the specie seldom exists in a form of pure H2. Therefore, to obtain hydrogen in volumes suitable to be used as a raw material it is necesary to decompose hydrogen-rich compounds. The carbohydrate-rich biomass can be an important source of hydrogen by applying the process of dark fermentation....
-
Hydrogen production from biomass using dark fermentation
PublicationHydrogen applicability in the power, chemical and petrochemical industries is constantly growing. Efficientmethods of hydrogen generation from renewable sources, including waste products, are currently being de-veloped, even though hydrogen is mainly produced through steam reforming or thermal cracking of natural gasor petroleum fractions. In paper alternative methods of hydrogen production with a particular emphasis on darkfermentation...
-
Facile formation of self-organized TiO2 nanotubes in electrolyte containing ionic liquid - ethylammonium nitrate and their remarkable photocatalytic properties
PublicationThe oriented TiO2 nanotube arrays (NTs) are identified as a stable, active and recyclable photocatalytic surface. However, their photoactivity is strictly depended on morphology (especially length), which could be controlled by anodic oxidation parameters, including electrolyte properties. To control the morphology, were successfully synthesized a series of NTs by a novel approach where ionic liquid (IL), ethylammonium nitrate...
-
Ordered TiO2 nanotubes with improved photoactivity through self-organizing anodization with the addition of an ionic liquid: effects of the preparation conditions
PublicationModifying the geometric and surface parameters of oriented TiO2 nanotubes (NTs) is beneficial to the utilization of solar energy for chemical reactions, and this performance may be further improved. Thus, the effects of adding an ionic liquid (IL), 1-butylpiridinium chloride [BPy][Cl], and the effects of the water content and preparation conditions on the surface morphological, physicochemical, photocatalytic and photoelectrochemical...
-
Reclaimed rubber in-situ grafted with soybean oil as a novel green reactive plasticizer in SBR/silica compounds
PublicationPolymer recycling and biodegradable polymeric materials are two major routes towards the sustainable development of polymer materials which contributes to the management of waste. In this regard, an eco-friendly approach is presented wherein high reclaiming degree of ground tire rubber (GTR) was achieved by low-temperature oxidation under swollen action of soybean oil. In-situ reclaimed GTR with soybean oil was cured into reactive...
-
Ranking of Heterogeneous Catalysts Metals by Their Greenness
PublicationCatalysis is very important process in industry and laboratory practice, especially from the point of green chemistry principles. However, eco-friendly character of heterogeneous catalysts, containing transition metal components has not been evaluated, yet. Therefore, we perform a comprehensive assessment of 18 heterogeneous metal catalysts (Pd, Pt, V, Co, Ni, Mo, Ru, Mn, Au, Cu, Cd, Zr, Fe, Rh, Ir, Sn, Zn, Ag) using multicriteria...
-
Aqueous Mechanical Oxidation of Zn Dust: An Inventive Technique for Bulk Production of ZnO Nanorods
Publication -
Recovery of Nonsteroidal Anti-Inflammatory Drugs from Wastes Using Ionic-Liquid-Based Three-Phase Partitioning Systems
Publication -
Scenarios as a tool supporting decisions in urban energy policy: The analysis using fuzzy logic, multi-criteria analysis and GIS tools
Publication -
Thermal analysis of macro-encapsulated phase change material coupled with domestic gas heater for building heating
Publication -
Historical, technical and economic aspects of biogas development: Case Polanda and Ukraine
PublicationThe paper describes 3700 years of biogas manufacture with more details of last 120 years. Due to V. Omelianskij׳s researches 120 years ago, Ukrainians achieved a share in biogas manufacture in the overall biogas development. Poland started to take part in biogas development 96 years ago by finishing biogas plant in Posen 1928. History and current status of biogas plants achievements are collected and analyzed. Faults and achievements...
-
Technological solutions for boosting hydrogen role in decarbonization strategies and net-zero goals of world shipping: Challenges and perspectives
PublicationFacing the problems concerning greenhouse gas (GHG) emissions from international ocean shipping has meant that the latest regulations of the International Maritime Organization, issued on 1st January 2023, have come into force, with the aim of reducing GHG emissions from maritime activities. Hydrogen has been suggested as an alternative fuel to achieve decarbonization ambitions in the near future. Although hydrogen has been investigated...
-
Synthesis and application of biomass-derived magnetic biochar catalyst for simultaneous esterification and trans-esterification of waste cooking oil into biodiesel: modeling and optimization
PublicationThis work created, characterized, and used a magnetic biochar catalyst that is both eco-friendly and very effective. Sugarcane bagasse was selected as primary raw material for catalyst preparation, because it is renewable and ecofriendly biomass. Cata- lyst created by doping sugarcane bagasse biochar with magnetic material in the form of (FeSO 4 ·7H 2 O). Thermogravimetric Analysis (TGA) and Fourier Transform Infrared spectroscopy...
-
Fabrication and Characterization of Green Polyurethane Foams with Enhanced Vibration Damping Capability
PublicationOver the past decades, there has been an intensive development of the technologies and innovations aimed at increasing the quality of life. This development largely concerns the comfort of use of everyday products that, among others, are products of the automotive, construction, or furniture industries. Considering the increase in the comfort of using products such as cars, houses, and flats, one of the comfort features of their...
-
Biobased Ultralow-Density Polyurethane Foams with Enhanced Recyclability
PublicationPolyurethane (PUR) foams are widely used in many engineering applications, but their efficient recycling has remained a major challenge for many years. This study presents a novel strategy of incorporating hydrolyzable ester units into the PUR structure to enhance PUR foam recyclability. The present ecodesign concept of PUR materials enables fully the replacement of petrochemical polyols with biobased alternatives and production...
-
Synthesis of Trehalose by the Erythritol-Producing Yeast Yarrowia lipolytica Co-Displaying Maltooligosyltrehalose Synthase and Maltooligosyltrehalose Trehalohydrolase
PublicationIndustrial trehalose production faces economic challenges with costly enzyme preparations, prompting the exploration of eco-friendly alternatives. Here, we established a coupled functional sugar production line leveraging erythritolproducing cells as an innovative enzyme preparation for trehalose synthesis. The erythritol-producing Yarrowia lipolytica was modified to express a fusion protein consisting of maltooligosyltrehalose synthase...
-
Sewage sludge co-pyrolysis with agricultural/forest residues: A comparative life-cycle assessment
PublicationThis study aims to determine the sustainability and energy efficiency of co-pyrolysis scenarios as treatment processes for municipal sewage sludge through a life cycle assessment (LCA). In addition, sensitivity and energy recovery analyses are conducted to determine the possible methods for optimizing the co-pyrolysis process from a circular bioeconomy perspective. Corncob and wood residue have been selected as potential co-feed...
-
Net-zero carbon condition in wastewater treatment plants: A systematic review of mitigation strategies and challenges
PublicationThe wastewater sector accounts for up to 7 and 10% of anthropogenic CH4 and N2O emissions, respectively. Nowadays wastewater treatment plants are going through a paradigm shift to approach a net-zero carbon condition. Numerous ongoing measures have taken place to identify the sources of greenhouse gases and minimize the carbon footprint. This paper systematically reviews all known practices leading towards net-zero carbon wastewater...
-
Novel investigation of pyrolysis mechanisms and kinetics for functional groups in biomass matrix
Publication -
Ammonium Enhances Food Waste Fermentation to High-Value Optically Active l-Lactic acid
Publication -
Current status and future success of renewable energy in Pakistan
PublicationMismatch between energy demand and supply from last two decades has been increasing because of the domination of expensive imported oil in energy mix of Pakistan. To import crude oil Government paid US $ 9 billion in 2008–2009 to meet the energy demands...
-
Amine-Based Ionic Liquid for CO2 Capture and Electrochemical or Thermal Regeneration
Publication -
The impact of gasification wastewater on soil microorganisms and the growth of oat and red clover
Publication -
Energy consumption optimization in wastewater treatment plants: Machine learning for monitoring incineration of sewage sludge
PublicationBiomass management in terms of energy consumption optimization has become a recent challenge for developed countries. Nevertheless, the multiplicity of materials and operating parameters controlling energy consumption in wastewater treatment plants necessitates the need for sophisticated well-organized disciplines in order to minimize energy consumption and dissipation. Sewage sludge (SS) disposal management is the key stage of...
-
Potential applications of crude glycerol in polymer technology–Current state and perspectives
PublicationThe increasing use of bio-based fuels and fuel additives, among them biodiesel, causes significant surplus of crude glycerol on the market which creates new challenges in terms of its sustainable utilization. A lot of ways for the incorporation of this by-product into different branches of industry requires purification by expensive and complicated processes. Therefore, researchers are seeking for applications of untreated crude...
-
Applying response surface method to optimize the performance of a divergent-chimney solar power plant
PublicationOne of the effective tools to generate electricity from solar energy is Divergent-chimney solar power plant (DSPP). Divergent and cylindrical chimneys of solar power plants have different performances considering turbine pressure drop ratio (ft). For the first time, the divergent angle (DA) and solar radiation (SR) interaction effects on 〖ft〗_opt are discussed through applying the Computational Fluid Dynamics (CFD) and Response...
-
Selected problems of decision making modelling in power engineering
PublicationThe paper presents the selected problems of decision making modelling in power engineering specially investment risk evaluation methods. The proposed model can be used in the range programming the development and investing process in power engineering. Decision making problems in power engineering and the evaluation of investment effectiveness in particular are closely related to modelling which relatively accurately reflects...
-
A review on application of artificial neural network (ANN) for performance and emission characteristics of diesel engine fueled with biodiesel-based fuels
PublicationBiodiesel has been emerging as a potential and promising biofuel for the strategy of reducing toxic emissions and improving engine performance. Computational methods aiming to offer numerical solutions were inevitable as a study methodology which was sometimes considered the only practical method. Artificial neural networks (ANN) were data-processing systems, which were used to tackle many issues in engineering and science, especially...
-
A review on recent advances in the application of biosurfactants in wastewater treatment
PublicationMicroorganisms produce a variety of non-conventional surface-active molecules, known as biosurfactants. The biosurfactants find diverse applications in the oil industry, agriculture, emulsifiers, and wastewater treatment, to name a few. Since they are produced from microbes, advantages such as biodegradability, lower toxicity, and environmental compatibility can be leveraged compared to the chemical surfactants. Recently, biosurfactants...
-
S-scheme heterojunction Bi2O3-ZnO/Bentonite clay composite with enhanced photocatalytic performance
PublicationThe industrial waste water is always a bottleneck problem in the modern civilization of the present era. In a quest to develop effective methods for the elimination of lethal pollutants from the waste water and water remediation, this work is focused on the development of a rapid and proficient approach for preparing supported binary metal oxide catalyst for photocatalytic advance oxidation process used in waste water treatment...
-
CO2 Separation Using Supported Deep Eutectic Liquid Membranes Based on 1,2-propanediol
PublicationIn this work, deep eutectic solvents (DESs) composed of choline chloride, acetylcholine chloride or tetrabutylammonium chloride, and 1,2-propanediol were used as a liquid phase for polypropylene-based supported liquid membranes (SLMs) and evaluated for the separation of carbon dioxide from CO2/N2 mixtures. Fourier transform infrared spectra were obtained to confirm DES formation, and the thermal stability of solvents was investigated...
-
Game about space or game in the space?
PublicationThe article analyzes various aspects of the actions taken by participants involved in the process of a spatial change. Such a process is described as a game about space or a game in the space. Different terminology is presented, in particular the meaning of: spatial order, regional studies, eco-development, sustainable development. Different forms of the game are analyzed: space as a theater, as a casino, as an area of conflict....
-
Lithuania inland waterways and its prospects
PublicationInland waterways have some traditions in Lithuania and in neighbor Countries, but during last 50 years other modes of transport move out inland waterway transport from real economical activity. In the same time inland waterways is the main green and sustainable transport system. In this article are presented analysis situation, methodology for the ships optimal using in inland waterways, forecasting of the possible cargo and passenger...
-
Working in harmony with nature. Green office buildings in a present-day city
PublicationMetropolis - as main point of people's migration, mostly because of work, have to face sustainable development as a strategy for the near future. This article describes possible ways leading to the best office building concepts in the design process. Searching for a workspace in harmony with nature is one of the aspects of a balanced development. The challenge is to create functional, compact, environmentally friendly and healthy...
-
Case Study NEB Atlas / part I - 3D Models / King's Cross, London
Open Research DataThe data presents the results of work on the analysis of contemporary neighbourhoods. The aim of this part of the research was to create a digital model - a simplified digital twin - for selected parts of housing estates already realised in various cities in Europe. This group presents a model for a fragment of the King's Cross, London, UK. The students...
-
Redesign of the Research Platform for Monitoring, Control and Security of Critical Infrastructure Systems
PublicationCritical Infrastructure Systems (CISs) play a key role in modern societies. Their sustainable operation depends heavily on the performance of dedicated structures and algorithms targeting monitoring, control and security aspects. In previous work a Research Platform (RP) for the design and simulation of such systems was presented. This works updates the information on the RP through the description of major hardware and software...
-
Projektowanie środowiskowe
PublicationProjektowanie środowiskowe, nazywane też zrównoważonym projektowaniem architektonicznym (sustainable design), można najkrócej zdefiniować jako ‘projektowanie architektoniczne przyjazne środowisku i społecznie odpowiedzialne’. W Polsce zastosowanie zasad rozwoju zrównoważonego do projektowania architektonicznego jest w fazie początkowej, zarówno w sferze teoretycznej jak i praktycznej. W publikacji omówiono podstawowe zagadnienia...
-
Occupational Health and Safety Ergonomics - L-15/Ć-0/L-0/P-0, FMEST, ENERGY TECHNOLOGIES, I degree, se 01, stationary, (PG_00041987), winter semester 2022/2023
e-Learning CoursesDefinitions of ergonomics, its subject, purpose and application. Description of the human-machine system environment. The concept of sustainable development. Environmental management systems. Human model and its characteristics. Human possibilities and industrial processes. Human work environment - material conditions. Principles of human work environment design. Safety and reliability of the human - machine - environment system....
-
Occupational Health and Safety Ergonomics - L-15/C-0/L-0/P-0, ENERGY TECHNOLOGIES, se 01, (PG_00041987), winter semester, 2024/2025
e-Learning CoursesDefinitions of ergonomics, its subject, purpose and application. Description of the human-machine system environment. The concept of sustainable development. Environmental management systems. Human model and its characteristics. Human possibilities and industrial processes. Human work environment - material conditions. Principles of human work environment design. Safety and reliability of the human - machine - environment system....
-
Occupational Health and Safety Ergonomics - L-15/C-0/L-0/P-0, ENERGY TECHNOLOGIES, se 01, (PG_00041987), winter semester, 2023/2024
e-Learning CoursesDefinitions of ergonomics, its subject, purpose and application. Description of the human-machine system environment. The concept of sustainable development. Environmental management systems. Human model and its characteristics. Human possibilities and industrial processes. Human work environment - material conditions. Principles of human work environment design. Safety and reliability of the human - machine - environment system....
-
Sources of inspiration in designing ecological buildings. If not Pinterest than what?
PublicationEfficiency of ecological measures for sustainable architecture depends greatly upon the moment in which it is defined as essential, and how early it can be applied during the design concept stage. The following article refers to inspiration, the initial stage of the design and means to combine it with substantial knowledge regarding ecological architecture. Means, such as computer programs...
-
Effects of the Covid-19 travel restrictions on metropolises mobility: empirical evidence from the Tricity metropolis (Poland)
PublicationThis paper aims to assess changes in mobility and modal shift caused by COVID-19 travel restrictions among the residents of Gdańsk Bay Metropolis (Poland). Measurement’s moments were assumed in periods differing in the level of restric- tions. The computer-assisted telephone interview (CATI) was carried out in November and December 2020. The results did not confirm the expected modal shift. However, significant changes in the number...
-
NATURAL DEEP EUTECTIC SOLVENTS IN EXTRACTION PROCESS
PublicationDeveloping new, eco-friendly solvents which would meet technological and economic demands is perhaps the most popular aspects of Green Chemistry. Natural deep eutectic solvents (NADES) fully meet green chemistry principles. These solvents offer many advantages including biodegradability, low toxicity, sustainability, low costs and simple preparation. This paper provides an overview of knowledge regarding NADES with special emphasis...
-
Case Study NEB Atlas / part I - 3D Models / Brunnshög, Lund
Open Research DataThe data presents the results of work on the analysis of contemporary neighbourhoods. The aim of this part of the research was to create a digital model - a simplified digital twin - for selected parts of housing estates already realised in various cities in Europe. This group presents a model for a fragment of the Brunnshög district in Lund, Sweden....
-
Towards Compact City – Gdańsk-Osowa district case study, proposal no 2, January 2021
Open Research DataThe data presents results of work within the participatory planning process: Towards Compact City – Gdańsk-Osowa district case study, proposal no 2, from January 2021. The goal of the process was to present the new, innovative design visions for the area located in Gdańsk-Osowa district in the context of “Compact city” and “Walkable city” ideas. The...
-
Towards Compact City – Gdańsk-Osowa district case study, proposal no 3, January 2021
Open Research DataThe data presents results of work within the participatory planning process: Towards Compact City – Gdańsk-Osowa district case study, proposal no 3, from January 2021. The goal of the process was to present the new, innovative design visions for the area located in Gdańsk-Osowa district in the context of “Compact city” and “Walkable city” ideas. The...
-
Towards Compact City – Gdańsk-Osowa district case study, proposal no 7, January 2021
Open Research DataThe data presents results of work within the participatory planning process: Towards Compact City – Gdańsk-Osowa district case study, proposal no 7, from January 2021. The goal of the process was to present the new, innovative design visions for the area located in Gdańsk-Osowa district in the context of “Compact city” and “Walkable city” ideas. The...
-
Towards Compact City – Gdańsk-Osowa district case study, proposal no 6, January 2021
Open Research DataThe data presents results of work within the participatory planning process: Towards Compact City – Gdańsk-Osowa district case study, proposal no 6, from January 2021. The goal of the process was to present the new, innovative design visions for the area located in Gdańsk-Osowa district in the context of “Compact city” and “Walkable city” ideas. The...
-
Towards Compact City – Gdańsk-Osowa district case study, proposal no 5, January 2021
Open Research DataThe data presents results of work within the participatory planning process: Towards Compact City – Gdańsk-Osowa district case study, proposal no 5, from January 2021. The goal of the process was to present the new, innovative design visions for the area located in Gdańsk-Osowa district in the context of “Compact city” and “Walkable city” ideas. The...